Search NASA⌕ Search

SEARCH · Search NASA

Results for “hot”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

The critical role of hot carrier cooling in optically excited structural transitions

The hot carrier cooling occurs in most photoexcitation-induced phase transitions (PIPTs), but its role has often been neglected in many theoretical simulations as well as in proposed mechanisms. Here, by including the previously ignored hot carrier cooling in real-time time-dependent density functional theory (rt-TDDFT) simulations, we investigated the role of hot carrier cooling in PIPTs. Taking IrTe2 as an example, we reveal that the cooling of hot electrons from the higher energy levels of spatially extended states to the lower energy levels of the localized Ir–Ir dimer antibonding states strengthens remarkably the atomic driving forces and enhances atomic kinetic energy. These two factors combine to dissolute the Ir–Ir dimers on a timescale near the limit of atomic motions, thus initiating a deterministic kinetic phase transition. We further demonstrate that the subsequent cooling induces nonradiative recombination of photoexcited electrons and holes, leading to the ultrafast recovery of the Ir–Ir dimers observed experimentally. These findings provide a complete picture of the atomic dynamics in optically excited structural phase transitions.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Hot-Carrier Transfer at Photocatalytic Silicon/Platinum Interfaces

Interfacial charge transfer from silicon to heterogeneous catalysts plays a key role in silicon-based photoelectrochemical systems. In general, prior to interfacial charge transfer, carriers that are generated by photons with energies above the bandgap dissipate the excess kinetic energy via hot-carrier cooling, and such energy loss limits the maximum power conversion efficiency. The excess energy of hot-carriers, however, could be utilized through hot-carrier transfer from silicon to the catalysts, but such hot-carrier extraction has not yet been demonstrated. In this work, we exploit transient reflection spectroscopy to interrogate charge transfer at the interface between silicon and platinum. Additionally, quantitative modeling of the surface carrier kinetics indicates that the velocity of charge transfer from silicon to platinum exceeds 2.6 x 10 7 cm s -1 , corresponding to an average carrier temperature of extracted carriers of ~600 K, two times higher than the lattice temperature. The charge transfer velocity can be controllably reduced by inserting silica spacing layers between silicon and platinum.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Correlations between asymmetric compression, burn amplification, and hot-spot velocities in inertial confinement fusion implosions

Here, this manuscript examines the correlations between the hot-spot velocity (an observable signature of residual kinetic energy), low-mode implosion asymmetries, and burn amplification in inertial confinement fusion implosions on the National Ignition Facility (NIF). Using a combination of two-dimensional axis-symmetric and three-dimensional radiation-hydrodynamic simulations coupled to neutronics, we find that for typical NIF implosions, the stagnation asymmetry multiplies the observed hot-spot velocity anywhere from 80% to 120%, while burn amplification always increases it. Additionally, we find stagnation asymmetry typically deflects the observed hot-spot flow. The two mechanisms (low-mode implosion asymmetries and burn amplification) can be decoupled, and application of a simple model to a database of cryogenic implosions on the NIF infers the total hot-spot velocity amplification. This finding modifies the interpretation of data collected from inertial confinement fusion experiments and impacts the magnitude and origin of low-mode asymmetries.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

A physics-informed deep learning model of the hot tail runaway electron seed

A challenging aspect of the description of a tokamak disruption is evaluating the hot tail runaway electron seed that emerges during the thermal quench. This problem is made challenging due to the requirement of describing a strongly non-thermal electron distribution, together with the need to incorporate a diverse range of multiphysics processes, including magnetohydrodynamic instabilities, impurity transport, and radiative losses. Here this work develops a physics-informed neural network (PINN) tailored to the solution of the hot tail seed during an axisymmetric thermal quench. Here, a PINN is developed to identify solutions to the adjoint relativistic Fokker–Planck equation in the presence of a rapid quench of the plasma's thermal energy. It is shown that the PINN is able to accurately predict the hot tail seed across a range of parameters, including the thermal quench timescale, initial plasma temperature, and local current density, in the absence of experimental or simulation data. The hot tail PINN is verified by comparison with direct Monte Carlo simulations, with excellent agreement found across a broad range of thermal quench conditions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Diagnosing hot-spot symmetry in surrogate ignition experiments via secondary DT-neutron spectroscopy at the NIF

The directional energy spectrum of neutrons generated from the in-flight fusion reaction of 1-MeV tritons contains information about the hot-spot symmetry. The National Ignition Facility (NIF) fields Symmetry Capsule (Symcap) implosions, which have historically measured the symmetry of the radiation, drive by measuring the hot-spot shape via x-ray self-emission. Symcaps are used to tune the hot-spot symmetry for ignition experiments at the NIF. This work shows the relationship between directional secondary DT-n spectra and x-ray imaging data for a large database of Symcap implosions. A correlation is observed between the relative widths of the DT-n spectra measured with nTOFs and the shape measured with x-ray imaging. A Monte Carlo model, which computes the directional secondary DT-n spectrum, is used to interpret the results. A comparison of the x-ray and secondary DT-n data with the Monte Carlo model indicates that 56% of the variance between the two datasets is explained by a P2 asymmetry. More advanced simulations using HYDRA suggest that the unaccounted variance is due to P1 and P4 asymmetries present in the hot spot. The comparison of secondary DT-n data and x-ray imaging data to the modeling shows the DT-n data contain important information that supplements current P2 measurements and contain new information about the P1 asymmetry.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Hot-spot model for inertial confinement fusion implosions with an applied magnetic field

Imposing a magnetic field on inertial confinement fusion implosions magnetizes the electrons in the compressed fuel; this suppresses thermal losses, which increases temperature and fusion yield. Indirect-drive experiments at the National Ignition Facility with 12 and 26 T applied magnetic fields demonstrate up to 40% increase in temperature, 3× increase in fusion yield, and indicate that magnetization alters the radial temperature profile [Moody et al., Phys. Rev. Lett. 129, 195002 (2022); Lahmann et al., APS DPP (2022)]. In this work, we develop a semi-analytic hot-spot model, which accounts for the two-dimensional (2D) Braginskii anisotropic heat flow due to an applied axial magnetic field. First, we show that hot-spot magnetization alters the radial temperature profile, increasing the central peakedness, which is most pronounced for moderately magnetized implosions (with 8–14 T applied field), compared to both unmagnetized (with no applied field) and highly magnetized (with 26 T or higher applied field) implosions. This model explains the trend in the experimental data, which finds a similarly altered temperature profile in the 12 T experiment. Next, we derive the hot-spot model for gas-filled (Symcap) implosions, accounting for the effects of magnetization on the thermal conduction and in changing the radial temperature (and density) profiles. Using this model, we compute predicted central temperature amplification and yield enhancement scaling with the applied magnetic field. The central temperature fits the experimental data accurately, and the discrepancy in the yield suggests a systematic (independent of applied field) degradation, such as mix, and additional degradation in the reference unmagnetized shot, such as reduced laser drive, increased implosion asymmetry, or the magnetic field suppressing ablator mixing into the hot-spot.

Alpha particles↗
DOE OSTI2025

Atomistically resolved hot exciton relaxation dynamics in CdSe quantum dots: Experiment and theory

Semiconductor quantum dots (QDs) are well known to give rise to a quantum confined structure of excitons. Because of this quantum confinement, new physics of hot exciton relaxation dynamics arises. Decades of work using transient absorption (TA) spectroscopy have yielded initial simple observations, such as estimates of the cooling rate from single pump photon energy experiments. More detailed TA experiments employed variable pump photon energies to measure excitonic state-resolved transition rates. These TA measurements, usually the simplest form, have been employed to characterize QDs and their relaxation dynamics to this day. Yet, these TA measurements are fundamentally lacking in their ability to measure energy-resolved hot exciton cooling, which requires observation of the full cooling history through the real excitonic manifold. Here, we employ coherent multi-dimensional spectroscopy (CMDS) to perform an atomistically directed study of hot exciton cooling in CdSe QDs, revealing energy resolved relaxation dynamics. CMDS experiments are compared with simulations and prior TA measurements and simpler theories. Our findings reveal a hot exciton relaxation dynamics landscape. This relaxation dynamics landscape is a linear or sub-linear function of excess energy for different structures of QDs, with a strong size dependence. Our model simulations parameterized by the empirical pseudopotential model reproduces the experimental functional form and the dependence upon QD diameter and shell.

Atomistic simulations↗
DOE OSTI2021

Rapid Nb 3 Sn film growth by sputtering Nb on hot bronze

Nb deposited by magnetron sputtering onto hot Cu-15 wt.%Sn bronze substrates at temperatures above 700 °C achieved Nb 3 Sn film growth at a rate of 33 nm min -1 , which was an order of magnitude faster than that achieved for deposition of Nb on bronze at low temperature followed by in situ post reaction at the same high temperatures. Tin content in the Nb 3 Sn films made on hot bronze was ~26.3%, which is significantly higher than ~24.5% obtained by post-reaction as well as for typical bulk reactions between Nb and α -bronze. The Nb 3 Sn lattice parameter was consistent with measured tin content and predicted elastic strain for both routes. Critical temperatures of 14 K–16 K, instead of 18 K, were consistent with elastic strain due to coefficient of thermal expansion mismatch between the Nb 3 Sn and bronze substrate and, for the hot-bronze samples, stress related to the growth mechanism. Films were fully coalesced and had surface roughness values <20 nm over a 100 μ m 2 scan. Grain structure of the Nb 3 Sn films produced by Nb sputtering on hot bronze resembles zone 2 in the Thornton structure-zone diagram, in contrast to the equiaxed grain structure reminiscent of microstructure observed in reacted Nb 3 Sn wires exhibited by the post-reaction route.

Physics↗
DOE OSTI2025

Kinetic modeling of hot tail runaway electron generation during plasma disruptions using the JOREK code

The generation of runaway electrons (REs) during disruptions poses a significant challenge for the operation of tokamaks. The production of these high-energy electrons can cause substantial damage, particularly when the plasma current is high, making it a critical concern for ITER. For the high-temperature plasmas anticipated in ITER, the primary generation of REs may be dominated by the hot tail mechanism, which consists of the acceleration of hot electrons from the pre-disruption population which have not yet thermalized with the bulk following the rapid cooling of the plasma. To account for the significant 3D effects on RE production, a hot tail modeling framework has been developed within the non-linear 3D extended MHD code JOREK. This paper presents the structure of this framework, which is based on test electrons evolving in MHD fields. The verification of the method shows good agreement with the reference DREAM code for 0D test cases, as well as for axisymmetric simulations of 15 MA ITER H-mode disruption scenarios. Furthermore, a proof-of-principle application to a DIII-D case demonstrates the framework’s capability to capture for the first time the hot tail generation in 3D MHD simulations in realistic geometry. Preliminary results suggest that the production of REs is significantly reduced by stochastic losses.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

TESS giants transiting giants V – two hot Jupiters orbiting red giant hosts

ABSTRACT In this work, we present the discovery and confirmation of two hot Jupiters orbiting red giant stars, TOI-4377 b and TOI-4551 b, observed by Transiting Exoplanet Survey Satellite in the Southern ecliptic hemisphere and later followed-up with radial-velocity (RV) observations. For TOI-4377 b, we report a mass of $0.957^{+0.089}_{-0.087} \ M_\mathrm{J}$ and a inflated radius of 1.348 ± 0.081 RJ orbiting an evolved intermediate-mass star (1.36 M⊙ and 3.52 R⊙; TIC 394918211) on a period of of 4.378 d. For TOI-4551 b, we report a mass of 1.49 ± 0.13 MJ and a radius that is not obviously inflated of $1.058^{+0.110}_{-0.062} \ R_\mathrm{J}$, also orbiting an evolved intermediate-mass star (1.31 M⊙ and 3.55 R⊙; TIC 204650483) on a period of 9.956 d. We place both planets in context of known systems with hot Jupiters orbiting evolved hosts, and note that both planets follow the observed trend of the known stellar incident flux-planetary radius relation observed for these short-period giants. Additionally, we produce planetary interior models to estimate the heating efficiency with which stellar incident flux is deposited in the planet’s interior, estimating values of $1.91 \pm 0.48~{{\ \rm per\ cent}}$ and $2.19 \pm 0.45~{{\ \rm per\ cent}}$ for TOI-4377 b and TOI-4551 b, respectively. These values are in line with the known population of hot Jupiters, including hot Jupiters orbiting main-sequence hosts, which suggests that the radii of our planets have re-inflated in step with their parent star’s brightening as they evolved into the post-main sequence. Finally, we evaluate the potential to observe orbital decay in both systems.

Pereira, Filipe (ORCID:0000000221577146)↗
DOE OSTI2025

Inference of three-dimensional hot-spot and shell morphology in inertial confinement fusion experiments using a convolutional neural network

The performance of inertial confinement fusion (ICF) implosions is sensitive to the three-dimensional (3D) morphology of the hot-spot and shell configurations. The ability to infer shell-mass uniformity and reconstruct 3D hot spots is crucial for quantifying the degradation of ignition criteria and improving symmetry in ICF implosion experiments. In this work, we present a deep-learning convolutional neural network (CNN) for reconstructing 3D hot-spot and shell structures for ICF capsules. The 3D geometry of the hot spot is reconstructed from x-ray images measured from multiple lines of sight on OMEGA. The shell configuration is inferred indirectly through machine learning using a convolutional neural network extensively trained on a dec3d simulation database. This simulation-dependent approach yields consistent agreement between reconstructed 3D shell densities and machine-learning optimized dec3d simulation results. This work demonstrates a CNN framework that successfully reconstructs 3D capsule structures from two-dimensional images in ICF implosions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Hot-lines topology and the fate of the spin resonance mode in three-dimensional unconventional superconductors

In the quasi-two-dimensional (quasi-2D) copper- and iron-based superconductors, the onset of superconductivity is accompanied by a prominent peak in the magnetic spectrum at momenta close to the wave-vector of the nearby antiferromagnetic state. Such a peak is well described in terms of a spin resonance mode, i.e., a spin-1 exciton theoretically predicted for quasi-2D superconductors with a sign-changing gap. The same theories, however, indicate that such a resonance mode should be absent in a three-dimensional (3D) system with a spherical Fermi surface. This raises the question of the fate of the spin resonance mode in layered unconventional superconductors that are not strongly anisotropic, such as certain heavy-fermion compounds and potentially the newly discovered nickelate superconductor NdNiO 2 . Here, we use the random phase approximation to calculate the dynamical spin susceptibility of 3D superconductors with a d x 2 –y 2 -wave gap symmetry and corrugated cylindrical-like Fermi surfaces. By varying the out-of-plane hopping anisotropy t z /t, we demonstrate that the appearance of a spin resonance mode is determined by the topology of the hot lines, i.e., lines on the Fermi surface that are connected by the magnetic wave vector. For an in-plane antiferromagnetic wave vector, the hot lines undergo a topological transition from open lines to closed loops at a critical t z /t value. The closed hot lines cross the nodal superconducting lines, making the spin resonance mode overdamped and incoherent. In contrast, for an out-of-plane antiferromagnetic wave vector, the hot lines remain open and the spin resonance mode remains sharp. We discuss the experimental implications of our results for the out-of-plane dispersion of the spin resonance mode and, more generally, for inelastic neutron scattering experiments on unconventional superconductors.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Hot Spot Evolution Measured by High-Resolution X-Ray Spectroscopy at the National Ignition Facility

Evolution of the hot spot plasma conditions was measured using high-resolution x-ray spectroscopy at the National Ignition Facility. The capsules were filled with DD gas with trace levels of Kr and had either a high-density-carbon (HDC) ablator or a tungsten (W)-doped HDC ablator. Time-resolved measurement of the Kr He β spectra, absolutely calibrated by a simultaneous time-integrated measurement, allows inference of the electron density and temperature through observing Stark broadening and the relative intensities of dielectronic satellites. By matching the calculated hot spot emission using a collisional-radiative code to experimental observations, the hot spot size and areal density are determined. Here these advanced spectroscopy techniques further reveal the effect of W dopant in the ablator on the hot spot parameters for their improved implosion performance.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Lawrence Livermore National Security, LLCSite 300: Toxic Emissions Inventory Plan for ABA 2588 California Air Toxics "Hot Spots" Information and Assessment Act of 1987 (Revision 3.0)

The Air Toxics "Hot Spots" Information and Assessment Act (AB 2588 or the “Act”) was enacted in September 1987. Under the Act, stationary sources are required to report the types and quantities of certain toxic substances their facilities routinely release into the air. AB 2588 is designed to provide information to state and local agencies and to the general public on the extent of airborne emissions from stationary sources and the potential public health impacts of those emissions. The San Joaquin Valley Air Pollution Control District (the District) is mandated by the State to implement AB 2588. On March 6, 2015, The State Office of Environmental Health Hazard Assessment (OEHHA) adopted changes to the Air Toxics Hot Spots Program Guidance Manual for the Preparation of Health Risk Assessments. These revisions were designed to incorporate three technical support documents and to provide enhanced protection of children as required under state law (SB 25, Escutia, 1999). Due to these recent changes, and the corresponding potential increases in calculated health risk, the District notified LAWRENCE LIVERMORE NATIONAL SECURITY, LLC that we must be re-evaluated under AB 2588. Pursuant to the Air Toxics "Hot Spots" Information and Assessment Act of 1987, we have prepared a comprehensive, site-specific Toxics Emissions Inventory Plan. The plan specifies in detail how LAWRENCE LIVERMORE NATIONAL SECURITY, LLC will inventory our facility's emissions of all toxic substances on the list of substances subject to the Act. The plan provides a comprehensive and detailed description of the methods that will be used to quantify air releases or potential air releases of listed substances from all points of release. The plan also includes quantification methods which result in accurate and comprehensive characterization of releases and comply with all applicable requirements of the “Hot Spots” regulation.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Hot Pressing of Reinforced Li-NMC All-Solid State Batteries with Sulfide Glass Electrolyte

The performance of solid-state batteries (SSBs) with sulfide solid-state electrolytes (SSEs) is limited because they are 10 - 30% porous. Porosity limits energy density of the composite cathode and provides a conduit for Li-metal deposits through the separator if operating specifications (e.g. current density, operating temperature, and pressure) are not strictly controlled. This project focused on demonstrating that hot press cell processing and appropriately formulated sulfide glass SSEs can help eliminate porosity to enable SSBs with energy density of ≥ 350 Wh/kg. The objective of the project was to research, develop, and test SSBs capable of achieving program performance metrics by implementing appropriately formulated sulfide glass SSEs and hot press cell processing in a dry room environment. In the composite cathode, hot pressing helps eliminate porosity to increase energy density by enabling thick composite cathodes with high active material loading. In the separator, hot pressing helps eliminate porosity that may otherwise provide a conduit for Li metal deposits to short the cell.

25 ENERGY STORAGE↗
DOE OSTI2021

TESS Delivers Five New Hot Giant Planets Orbiting Bright Stars from the Full-frame Images

We present the discovery and characterization of five hot and warm Jupiters—TOI-628 b (TIC 281408474; HD 288842), TOI-640 b (TIC 147977348), TOI-1333 b (TIC 395171208, BD+47 3521A), TOI-1478 b (TIC 409794137), and TOI-1601 b (TIC 139375960)—based on data from NASA’s Transiting Exoplanet Survey Satellite (TESS). The five planets were identified from the full-frame images and were confirmed through a series of photometric and spectroscopic follow-up observations by the TESS Follow-up Observing Program Working Group. The planets are all Jovian size (R {sub P} = 1.01–1.77 R {sub J}) and have masses that range from 0.85 to 6.33 M {sub J}. The host stars of these systems have F and G spectral types (5595 ≤ T {sub eff} ≤ 6460 K) and are all relatively bright (9.5 < V < 10.8, 8.2 < K < 9.3), making them well suited for future detailed characterization efforts. Three of the systems in our sample (TOI-640 b, TOI-1333 b, and TOI-1601 b) orbit subgiant host stars (log g < 4.1). TOI-640 b is one of only three known hot Jupiters to have a highly inflated radius (R {sub P} > 1.7 R {sub J}, possibly a result of its host star’s evolution) and resides on an orbit with a period longer than 5 days. TOI-628 b is the most massive, hot Jupiter discovered to date by TESS with a measured mass of 6.31{sub −0.30}{sup +0.28} M {sub J} and a statistically significant, nonzero orbital eccentricity of e = 0.074{sub −0.022}{sup +0.021}. This planet would not have had enough time to circularize through tidal forces from our analysis, suggesting that it might be remnant eccentricity from its migration. The longest-period planet in this sample, TOI-1478 b (P = 10.18 days), is a warm Jupiter in a circular orbit around a near-solar analog. NASA’s TESS mission is continuing to increase the sample of well-characterized hot and warm Jupiters, complementing its primary mission goals.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Optimization and Experimental Validation of Annular Finned PCM-HX for a Domestic Hot Water Heater Application

The load profile for domestic water heating is time-dependent and can result in high energy demand during peak operating times. Shifting this peak load can have significant environmental and economic impacts. Phase change material (PCM)-based thermal energy storage (TES) is a potentially useful technology for peak load shifting in domestic hot water (DHW) applications thanks to its high latent heat and energy density. In this study, an annular finned-tube PCM-HX design concept was optimized for a load-shifting TES unit to meet the Department of Energy standard for a medium-usage DHW heater using a resistance-capacitance model (RCM) integrated with a Multi-Objective Genetic Algorithm. The optimized design comprised 70 identical annular finned-tube PCM-HX units connected in parallel and utilizing RT62HC as the PCM. A single PCM-HX unit was prototyped and tested in a vertically oriented setup with upward heat transfer fluid (HTF) flow. The hot water supply time was defined based on a cutoff temperature of 51.7°C. The as-designed mass flow rate (1.5 g/s) was tested to assess the performance of the prototyped PCM-HX unit for RCM validation. For the experimental investigation, RTD sensor bundles measured HTF temperature at the PCM-HX inlet and outlet, and a Coriolis flow meter accurately measured the HTF mass flow rate. The simulated discharging power underpredicted the experimental result by about 12%, and the simulated hot water supply time underpredicted the experimental result by approximately 13% for the as-designed mass flow rate (1.5 g/s). The average deviation of the hot water supply temperature between the experimental and RCM results during the complete PCM solidification process was 1.3 K for the as-designed mass flow rate. The overall good agreement between the experimental and RCM results provides confidence that computationally efficient models such as RCM can be utilized for design optimization of PCM-HXs.

42 ENGINEERING↗
DOE OSTI2022

Hot-Casting-Assisted Liquid Additive Engineering for Efficient and Stable Perovskite Solar Cells

High-performance inorganic–organic lead halide perovskite solar cells (PSCs) are often fabricated with a liquid additive such as dimethyl sulfoxide (DMSO), which retards crystallization and reduces roughness and pinholes in the perovskite layers. However, DMSO can be trapped during perovskite film formation and induce voids and undesired reaction byproducts upon later processing steps. Here, it is shown that the amount of residual DMSO can be reduced in as-spin-coated films significantly through use of preheated substrates, or a so-called hot-casting method. Hot casting increases the perovskite film thickness given the same concentration of solutions, which allows for reducing the perovskite solution concentration. By reducing the amount of DMSO in proportion to the concentration of perovskite precursors and using hot casting, it is possible to fabricate perovskite layers with improved perovskite–substrate interfaces by suppressing the formation of byproducts, which increase trap density and accelerate degradation of the perovskite layers. The best-performing PSCs exhibit a power conversion efficiency (PCE) of 23.4% (23.0% stabilized efficiency) under simulated solar illumination. Furthermore, encapsulated devices show considerably reduced post-burn-in decay, retaining 75% and 90% of their initial and post-burn-in efficiencies after 3000 h of operation with maximum power point tracking (MPPT) under high power of ultraviolet (UV)-containing continuous light exposure.

perovskite-substrate interface↗