Search NASA⌕ Search

SEARCH · Search NASA

Results for “hydration shell”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Amphiphilic Bottlebrush Block Copolymers: Analysis of Aqueous Self-Assembly by Small-Angle Neutron Scattering and Surface Tension Measurements

A systematic series of 16 amphiphilic bottlebrush block copolymers (BCPs) containing polystyrene and poly(N-acryloylmorpholine) (PACMO) side chains were prepared by a combination of atom-transfer radical polymerization (ATRP), photoiniferter polymerization, and ring-opening metathesis polymerization (ROMP). The grafting-through method used to prepare the polymers enabled a high degree of control over backbone and side-chain molar masses for each block. Surface tension measurements on the self-assembled amphiphilic bottlebrush BCPs in water revealed an ultralow critical micelle concentration (cmc), 1–2 orders of magnitude lower than linear BCP analogues on a molar basis, even for micelles with >90% PACMO content. Combined with coarse-grained molecular dynamics simulations, fitting of small-angle neutron scattering traces (SANS) allowed us to evaluate solution conformations for individual bottlebrush BCPs and micellar nanostructures for self-assembled macromolecules. Bottlebrush BCPs showed an increase in anisotropy with increasing PACMO content in toluene-d 8 , which is a good solvent for both blocks, reflecting an extended conformation for the PACMO block. SANS traces of bottlebrush BCPs assembled into micelles in D 2 O, a selective solvent for PACMO, were fitted to a core–shell–shell model, suggesting the presence of a partially hydrated inner shell. Here, results showed an average micelle diameter of 40 nm with combined shell diameters ranging from 16 to 18 nm. A general trend of increased stability of micelles (i.e., resistance to precipitation) was observed with increases in PACMO content. These results demonstrate the stability of bottlebrush polymer micelles, which self-assemble to form spherical micelles with ultralow (<70 nmol/L) cmc’s across a broad range of compositions.

36 MATERIALS SCIENCE↗
DOE OSTI2026

A Novel and Scalable Method for Microencapsulating Salt Hydrate Phase Change Materials in Core–Shell Fibers

Phase change materials (PCMs) are in high demand for applications such as thermal energy storage in buildings, electronics cooling, and thermal management of electric vehicle batteries and data centers. Among these materials, salt hydrate PCMs are particularly attractive due to their high thermal energy storage capacity and low cost. However, they suffer from two major issues: leakage in the melted phase and phase segregation during phase transitions. Microencapsulation is the primary process capable of addressing both of these challenges. However, there is no reliable or scalable method available for microencapsulating salt hydrate PCMs. As a result, the full potential of salt hydrates for building and data center applications has yet to be realized. In this work, we present an innovative method for the microencapsulation of salt hydrate PCMs using a co‐axial pushing technique. This process creates core–shell fibers, with the salt hydrate as the core and a polymer as the shell. Our approach demonstrates strong potential for scalable microencapsulation of salt hydrate PCMs. In conclusion, achieving scalability could enable their widespread use in applications such as data center cooling, battery thermal management, and building climate control.

Sharma, Jaswinder [Oak Ridge National Laboratory (↗
DOE OSTI2016

Observing structural reorientations at solvent–nanoparticle interfaces by X-ray diffraction – putting water in the spotlight

Nanoparticles are attractive in a wide range of research genres due to their size-dependent properties, which can be in contrast to those of micrometre-sized colloids or bulk materials. This may be attributed, in part, to their large surface-to-volume ratio and quantum confinement effects. There is a growing awareness that stress and strain at the particle surface contribute to their behaviour and this has been included in the structural models of nanoparticles for some time. One significant oversight in this field, however, has been the fact that the particle surface affects its surroundings in an equally important manner. It should be emphasized here that the surface areas involved are huge and, therefore, a significant proportion of solvent molecules are affected. Experimental evidence of this is emerging, where suitable techniques to probe the structural correlations of liquids at nanoparticle surfaces have only recently been developed. The recent validation of solvation shells around nanoparticles has been a significant milestone in advancing this concept. Restructured ordering of solvent molecules at the surfaces of nanoparticles has an influence on the entire panoply of solvent–particle interactions during, for example, particle formation and growth, adhesion forces in industrial filtration, and activities of nanoparticle–enzyme complexes. This article gives an overview of the advances made in solvent–nanoparticle interface research in recent years: from description of the structure of bulk solids and liquids via macroscopic planar surfaces, to the detection of nanoscopic restructuring effects. Water–nanoparticle interfaces are given specific attention to illustrate and highlight their similarity to biological systems.

36 MATERIALS SCIENCE↗
DOE OSTI2018

CuCl Complexation in the Vapor Phase: Insights from Ab Initio Molecular Dynamics Simulations

We investigated the hydration of the CuCl 0 complex in HCl-bearing water vapor at 350°C and a vapor-like fluid density between 0.02 and 0.09 g/cm 3 using ab initio molecular dynamics (MD) simulations. The simulations reveal that one water molecule is strongly bonded to Cu(I) (first coordination shell), forming a linear [H 2 O-Cu-Cl] 0 moiety. The second hydration shell is highly dynamic in nature, and individual configurations have short life-spans in such low-density vapors, resulting in large fluctuations in instantaneous hydration numbers over a timescale of picoseconds. The average hydration number in the second shell ( m ) increased from ~0.5 to ~3.5 and the calculated number of hydrogen bonds per water molecule increased from 0.09 to 0.25 when fluid density (which is correlated to water activity) increased from 0.02 to 0.09 g/cm 3 ( f H 2 O 1.72 to 2.05). These changes of hydration number are qualitatively consistent with previous solubility studies under similar conditions, although the absolute hydration numbers from MD were much lower than the values inferred by correlating experimental Cu fugacity with water fugacity. This could be due to the uncertainties in the MD simulations and uncertainty in the estimation of the fugacity coefficients for these highly nonideal “vapors” in the experiments. Finally, our study provides the first theoretical confirmation that beyond-first-shell hydrated metal complexes play an important role in metal transport in low-density hydrothermal fluids, even if it is highly disordered and dynamic in nature.

58 GEOSCIENCES↗
DOE OSTI2022

Impact of chitin nanofibers and nanocrystals from waste shrimp shells on mechanical properties, setting time, and late-age hydration of mortar

Every year ~ 6–8 million tonnes of shrimp, crab, and lobster shell wastes are generated, requiring costly disposal procedures. In this study, the chitin content of shrimp shell waste was oxidized to produce chitin nanocrystals (ChNC) and mechanically fibrillated to obtain chitin nanofibers (ChNF) and evaluated as additives for mortar. ChNF (0.075 wt%) and ChNC (0.05 wt%) retarded the final setting time by 50 and 30 min, likely through cement dispersion by electrostatic repulsion. ChNF (0.05 wt%) with a larger aspect ratio than ChNC resulted in the greatest improved flexural strength and fracture energy by 24% and 28%. Elastic modulus increased by up to 91% and 43% with ChNC and ChNF. Solid-state nuclear magnetic resonance (NMR) showed ChNF (0.05 wt%) enhanced calcium–silicate–hydrate structure with a 41% higher degree of polymerization, 9% more silicate chain length, and a 15% higher degree of hydration at 28 days. Based on the findings, chitin seems a viable biomass source for powerful structural nanofibers and nanocrystals for cementitious systems to divert seafood waste from landfills or the sea.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Molecular dynamics and continuum analyses of the electrokinetic zeta potential in nanostructured slit channels

This work presents a theoretical and numerical study of electrokinetic flow and the zeta potential for the case of slit channels with nanoscale surface features of dimensions comparable to the Debye length, by employing molecular dynamics simulations and continuum-level analyses. Additionally, a simple analytical model for considering the average effect of such surface features producing nanoscale roughness is proposed by employing matched asymptotic solutions for the charge density and fluid flow field, and matching conditions that satisfy electroneutrality and the Onsager reciprocal relation between the electroosmotic flow rate and streaming current. The proposed analytical model quantitatively accounts for results from molecular dynamics simulations that consider the presence of ion solvation shells and surface hydration layers. Our analysis indicates that a simultaneous knowledge of the electroosmotic and pressure-driven flow rate or streaming current can be instrumental to unambiguously determine the zeta potential in the presence of nanoscale surface features.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

Functionalization of Single-walled Carbon Nanotubes with Thermo-reversible Block Copolymers and Characterization by Small-angle Neutron Scattering

We demonstrate a protocol for single-walled carbon nanotube functionalization using thermo-sensitive PEO-PPO-PEO triblock copolymers in an aqueous solution In a carbon nanotube/PEO105-PPO70-PEO105 (poloxamer 407) aqueous solution, the amphiphilic poloxamer 407 adsorbs onto the carbon nanotube surfaces and self-assembles into continuous layers, driven by intermolecular interactions between constituent molecules. The addition of 5-methylsalicylic acid changes the self-assembled structure from spherical-micellar to a cylindrical morphology. The fabricated poloxamer 407/carbon nanotube hybrid particles exhibit thermo-responsive structural features so that the density and thickness of poloxamer 407 layers are also reversibly controllable by varying temperature. The detailed structural properties of the poloxamer 407/carbon nanotube particles in suspension can be characterized by small-angle neutron scattering experiments and model fit analyses. The distinct curve shapes of the scattering intensities depending on temperature control or addition of aromatic additives are well described by a modified core-shell cylinder model consisting of a carbon nanotube core cylinder, a hydrophobic shell, and a hydrated polymer layer. In conclusion, this method can provide a simple but efficient way for the fabrication and in-situ characterization of carbon nanotube-based nano particles with a structure-tunable encapsulation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2026

Quantitative SANS and multi-model analysis of spacer-dependent micellization of urea-based gemini surfactants

The micellization behavior of urea-based cationic gemini surfactants was investigated using small-angle neutron scattering (SANS) with multi-model form factor analysis. A homologous series of surfactants with urea group included in the hydrophobic tail and polymethylene spacers consisting of two to ten methylene units was analyzed using three form factor models: a core–shell ellipsoid and two variants of homogeneous ellipsoids. The results from all models show a consistent trend of the micelle structures, confirming that the spacer length critically influences micellar geometry, aggregation number, and hydration. The surfactant with four CH 2 groups in the spacer formed the largest micelles with the highest aggregation number, while longer spacers led to progressively smaller, more compact aggregates. The shell hydration—quantified as the volume fraction of heavy water within the hydrophilic region—decreased systematically with increasing spacer length due to enhanced hydrophobicity of the headgroup-spacer region. Intermicellar interactions, modeled as screened Coulomb interaction using the rescaled mean spherical approximation (RMSA), revealed the strongest electrostatic repulsion for the case of four methylene groups in the spacer, corresponding to the highest micellar charge and largest interparticle spacing. The observed spacer-dependent trends were robust across all modeling approaches, demonstrating that the spacer length serves as a key structural determinant of self-assembly in this type of urea-based gemini systems. These findings provide insight into the design of gemini surfactants with tailored aggregation behavior for applications in drug delivery, nanostructure templating, and solubilization technologies.

Core–shell ellipsoid model↗
DOE OSTI2018

Comparative CHARMM and AMOEBA Simulations of Lanthanide Hydration Energetics and Experimental Aqueous-Solution Structures

The accurate understanding of metal ion hydration in solutions is a prerequisite for predicting stability, reactivity, and solubility. Herein, additive CHARMM force field parameters were developed to enable molecular dynamics simulations of lanthanide (Ln) speciation in water. Quantitatively similar to the much more resource-intensive polarizable AMOEBA potential, the CHARMM simulations reproduce the experimental hydration free energies and correlations in the first shell (Ln-oxygen distance and hydration number). Comparisons of difference pair-distribution functions obtained from the two simulation approaches with those from high-energy X-ray scattering experiments reveal good agreement of first coordination sphere correlations for the Lu3+ ion (CHARMM only), but further improvement to both approaches is required to reproduce the broad, non-Gaussian distribution seen from the La3+ experiment. Second-coordination sphere comparisons demonstrate the importance of explicitly including an anion in the simulation. This work describes the usefulness of less resource-intensive additive potentials in some complex chemical systems such as solution environments where multiple interactions have similar energetics. In addition, 3-dimensional descriptions of the La3+ and Lu3+ coordination geometries are extracted from the CHARMM simulations and generally discussed in terms of potential improvements to solute-structure modeling within solution environments.

Qiao, Baofu↗
DOE OSTI2020

Gating of Hydrophobic Nanopores with Large Anions

In this report, understanding ion transport in nanoporous materials is critical to a wide variety of energy and environmental technologies, ranging from ion-selective membranes, drug delivery, and biosensing, to ion batteries and supercapacitors. While nanoscale transport is often described by continuum models that rely on a point charge description for ions and a homogeneous dielectric medium for the solvent, here, we show that transport of aqueous solutions at a hydrophobic interface can be highly dependent on the size and hydration strength of the solvated ions. Specifically, measurements of ion current through single silicon nitride nanopores that contain a hydrophobic-hydrophilic junction show that transport properties are dependent not only on applied voltage but also the type of anion. We find that in Cl - -contained solutions the nanopores only conducted ionic current above a negative voltage threshold. On the other hand, introduction of large polarizable anions, such as Br - and I - , facilitated the pore wetting, making the pore conductive at all examined voltages. Molecular dynamics simulations revealed that the large anions, Br - and I - , have a weaker solvation shell compared to that of Cl - , and consequently were prone to migrate from the aqueous solution to the hydrophobic surface, leading to the anion accumulation responsible for pore wetting. The results are essential for designing nanoporous systems that are selective to ions of the same charge, for realization of ion-induced wetting in hydrophobic pores, as well as for fundamental understanding on the role of ion hydration shell on the properties of solid/liquid interfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Structural and physicochemical insights into pH-responsive poly(DEAEMA- co -HEMA)-grafted mesoporous silica nanoparticles

Mesoporous silica nanoparticles (SiO 2 ) grafted with responsive polymer shells are versatile hybrid systems. Understanding their three-dimensional organization in the hydrated state remains a significant challenge. Here, in this study, SiO 2 nanoparticles were functionalized with a poly(DEAEMA-co-HEMA) shell via a “grafting-from” polymerization strategy in aqueous media. Successful surface modification was confirmed by FTIR, thermogravimetric analysis, transmission electron microscopy, X-ray photoelectron spectroscopy, N 2 sorption, and ζ-potential, yielding grafting contents of 22% (p1 DEAEMA-co-HEMA ) and 49% (p2 DEAEMA-co-HEMA ). Small-angle neutron scattering (SANS) with solvent contrast variation was employed to elucidate the solution-state core–shell architecture of p1 and p2 hybrids at pH 2, where the grafted polymer shell is protonated and highly hydrated. Near contrast matching of the silica core, theoretically estimated at 58% D 2 O, suppressed the scattering intensity, enhancing sensitivity to the polymer shell. Constrained core–shell ellipsoid modeling across solvent contrasts revealed a systematic increase in shell thickness, overall particle dimensions, and shell anisotropy with increasing grafting content. In solution, the hydrated polymer shells were markedly more extended and structurally anisotropic than suggested by dry-state techniques structural characterization, highlighting the importance of solution-state structural analysis for accurately describing grafted polymer architectures.

Core-shell biomaterials↗
DOE OSTI2021

Phase diagrams and microstructures of aqueous short alkyl chain polyethylene glycol ether carboxylate and carboxylic acid triblock surfactant solutions

The surfactant C 8 Eo 8 CH 2 COOH (Akypo LF2) and its salts have a small hydrophobic and a significantly longer hydrophilic part. As a consequence, there must be a significant steric constraint, once these surfactant molecules form micelles. In addition, the partially charged headgroups should bring some additional fine-tuning via electrostatic interactions to this "essentially non-ionic" surfactant. Experiments: Phase diagrams of binary mixtures of water and C 8 Eo 8 CH 2 COOH are established over large concentration and temperature ranges, also at different pHs and in the presence of sodium and calcium ions. Surface tensions and osmotic pressures are measured to understand the systems. To evaluate the microstructures, also Dynamic Light Scattering and Small-Angle X-ray Scattering are performed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Development and characteristics of ultra high-performance lightweight cementitious composites (UHP-LCCs)

Highlights: • An ultra high-performance lightweight cementitious composite (UHP-LCC) was designed. • The UHP-LCCs had ultra high strength (>120 MPa) and very low density (3 ). • The UHP-LCCs had high structural efficiency, good functional properties and superior durability. • The strategies and mechanisms on achieving UHP-LCCs with excellent performance were proposed. High strength and light weight are two recent opposite development trends of concrete. This study proposed a design concept of an ultra high-performance lightweight cementitious composite (UHP-LCC), which had a compressive strength of higher than 120 MPa and an air-dried density down to around 1800 kg/m{sup 3}. The UHP-LCCs were innovatively developed by incorporating micro-sized hollow particles with a high strength shell (hollow glass microspheres, HGM) into an ultra-high performance cementitious composite (UHPC). The roles of HGM in the UHP-LCCs were investigated by evaluating the reactivity of the HGM and the mechanisms on achieving the excellent mechanical properties, low density and superior durability were revealed. The Chapelle test results showed that the HGM exhibited some pozzolanic reactivity, which facilitated the reaction between the shell of HGM and the alkali hydration products of the paste matrix. This chemical reaction was conducive to improving the HGM-paste interface and enhancing the mechanical properties. With the use of microspheres with a high stiff shell, the fundamental properties of the UHP-LCCs including thermal insulation, sound absorption, resistance to water ingress and electrical resistivity were improved significantly. The strategies for preparing the UHP-LCCs with high structural efficiency and great performance were proposed. The results of this study provide a new approach for designing and producing a lightweight UHPC, which would be a promising material for long-span structures.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Molecular hydrogen solvated in water – A computational study

The aqueous hydrogen molecule is studied with molecular dynamics simulations at ambient temperature and pressure conditions, using a newly developed flexible and polarizable H{sub 2} molecule model. The design and implementation of this model, compatible with an existing flexible and polarizable force field for water, is presented in detail. The structure of the hydration layer suggests that first-shell water molecules accommodate the H{sub 2} molecule without major structural distortions and two-dimensional, radial-angular distribution functions indicate that as opposed to strictly tangential, the orientation of these water molecules is such that the solute is solvated with one of the free electron pairs of H{sub 2}O. The calculated self-diffusion coefficient of H{sub 2}(aq) agrees very well with experimental results and the time dependence of mean square displacement suggests the presence of caging on a time scale corresponding to hydrogen bond network vibrations in liquid water. Orientational correlation function of H{sub 2} experiences an extremely short-scale decay, making the H{sub 2}–H{sub 2}O interaction potential essentially isotropic by virtue of rotational averaging. The inclusion of explicit polarizability in the model allows for the calculation of Raman spectra that agree very well with available experimental data on H{sub 2}(aq) under differing pressure conditions, including accurate reproduction of the experimentally noted trends with solute pressure or concentration.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Encapsulation of hygroscopic liquids via polymer precipitation in non-aqueous emulsions

Here, encapsulation of ionic liquids (ILs) and phase change materials (PCMs) can overcome limitations associated with bulk materials, e.g., slow mass transfer rates, high viscosities, or susceptibility to external environment. Single step soft-templated encapsulation methods commonly use interfacial polymerization for shell formation, with a multifunctional monomer in the continuous phase and another in the discontinuous phase, and thus do not give pristine core material. We posit that polymer precipitation onto emulsion droplets in non-aqueous emulsions could produce a robust shell without contamination of the core, ideal for the encapsulation of water-sensitive or water-miscible materials. Solutions of commodity polymers were added to the continuous phase of non-aqueous Pickering emulsions stabilized by alkylated graphene oxide (GO) nanosheets such that the change in solubility of the polymer led to formation of robust shells and the production of capsules that could be isolated. We demonstrate that a polymer precipitation approach can produce capsules with pristine core of the IL 1-ethyl-3-methylimidazolium hexafluorophosphate [Emim][PF 6 ] or the salt hydrate PCM magnesium nitrate hexahydrate (MNH) and shell of nanosheets and polystyrene, poly(methyl methacrylate), or polyethylene. The capsules are approximately 80 wt% [Emim][PF 6 ] or >90 wt% MNH, and the core can undergo multiple cycles of solidification and melting without leakage or destruction. This novel, single-step methodology provides a distinct advantage to access capsules with pristine core composition and is amenable to different core and shell, paving the way for tailoring capsule composition for desired applications.

36 MATERIALS SCIENCE↗
DOE OSTI2025

A Novel Approach for Microencapsulating Salt Hydrate-Based Phase Change Materials

Energy storage technologies, particularly those utilizing phase change materials (PCMs), have gained attention for their high energy density and efficient thermal management. PCMs, which store energy through solid-liquid phase transitions, can efficiently capture and release thermal energy, but face the challenge of leakage during the phase change process. Inorganic PCMs, such as salt hydrates, offer high energy storage capacity, but are difficult to encapsulate due to their corrosive nature. Conventional encapsulation techniques for inorganic PCMs are limited, particularly for scalable applications. In this work, we present an innovative method for the encapsulation of salt hydrate-based inorganic PCMs (CaCl 2 ·6H 2 O) using co-axial electrospinning. The process involves the creation of co-axial fibers, with salt hydrate as the core and polymer (e.g., PVP) as the outer shell, effectively preventing leakage and improving the stability of the PCM. This approach demonstrates the potential for scalable microencapsulation of inorganic PCMs, marking the first report of using co-axial electrospinning for this purpose. This novel technique could contribute to enhancing the performance and applicability of PCMs in thermal energy storage systems and other energy efficiency applications.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Hydration of alumina (Al 2 O 3 ) toward advancing aluminum particles for energy generation applications

Transforming metal particle combustion may require alteration of the metal oxide passivation shell surrounding the metal core. One approach for aluminum (Al) relies on the hydrated form of the metal oxide to incite surface reactions. Here, this study explores the conditions required for hydrating alumina (Al 2 O 3 ) particles and then extends those conditions toward hydration of the Al 2 O 3 passivation layer surrounding an Al core particle. By raising the pH of the water slurry to 11 and controlling temperature and time in slurry (i.e., aging), aluminum hydroxide Al(OH) 3 formation from Al 2 O 3 particles was optimized. The procedure was then extended to Al nanoparticles (nAl). Even though heating and extended aging time in slurry proved advantageous for Al 2 O 3 particles, these conditions were discarded for nAl particles because they favored formation of AlOOH, a less desirable hydrate. Through microscopy, spectroscopy, X-ray diffraction, and thermal analyses, results indicate that for a pH range of 11.26–11.56, the original Al 2 O 3 shell on Al particles transformed into Al(OH) 3 . Results indicate a feasible path forward towards producing new shell chemistries that may result in more directed energy from metal particle combustion.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Compartmentalization of Incompatible Catalytic Transformations for Tandem Catalysis

In Nature, incompatible catalytic transformations are being carried out simultaneously through compartmentalization that allows for the combination of incompatible catalysts in tandem reactions. Herein, we take the compartmentalization concept to the synthetic realm and present an approach that allows two incompatible transition metal catalyzed transformations to proceed in one pot in tandem. The key is the site isolation of both catalysts through compartmentalization using a core-shell micellar support in an aqueous environment. The support is based on amphiphilic triblock copolymers of poly(2-oxazoline)s with orthogonal functional groups on the side-chain that can be used to crosslink covalently the micelle and to conjugate two metal catalysts in different domains of the micelle. Here, the micelle core and shell provide different microenvironments for the transformations: Co-catalyzed hydration of an alkyne proceeds in the hydrophobic core while the Rh-catalyzed asymmetric transfer hydrogenation of the intermediate ketone into a chiral alcohol occurs in the hydrophilic shell.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗