Search NASA⌕ Search

SEARCH · Search NASA

Results for “impedance modelling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Fabrication of high-performance gas-diffusion-electrode based membrane-electrode assemblies

This paper demonstrates the fabrication and processing steps required to produce high performance fuel cell membrane electrode assemblies (MEAs) based on spray-coated gas-diffusion electrodes (GDEs). It is demonstrated that coating the catalyst layer with a thin layer of ionomer and then hot pressing the GDEs to the membrane is required to achieve comparable catalyst activity and air performance to catalyst-coated-membrane MEAs. We show that there is a critical amount of ionomer required to achieve maximized performance. Using electron microscopy, we show that the combination of the ionomer overlayer and hot-pressing bonds the catalyst layer to the membrane, increasing the interfacial contact area and quality of this interface. We also find that the ionomer overlayer smooths the surface of the GDE and provides increased contact area between the GDE and the membrane. Additionally, we demonstrate that much less ionomer is required for high-performance than has been previously reported. Through model fitting of electrochemical impedance spectroscopy, we show that this improvement in the catalyst layer - membrane interface reduces the effective catalyst layer resistance, which reduces Ohmic losses and increases catalyst utilization.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2026

Engineering Antifreeze Proteins to Optimally Resist Engulfment by Ice

Antifreeze proteins (AFPs) facilitate the survival of organisms in cold climates by inhibiting the growth and/or recrystallization of ice. To function, AFPs must first bind to ice crystals; bound AFPs must then resist engulfment by using their nonbinding side (NBS) to pin the ice–water interface. Here, we seek to understand how the molecular characteristics of an NBS, such as its ice-phobicity or shape, influence its ability to resist engulfment. By characterizing the free energy barriers that impede the engulfment of model AFPs, we find that the critical supercooling ΔT*, above which an AFP is engulfed, is dictated by an optimal pinning site on the NBS. We further find that the optimal pinning site is determined by an interplay between the contact line perimeter P and a pinning efficiency η, with ΔT* ∝ ηP at the optimal pinning site. For a hemispherical AFP, which displays progressively inward tapering, we find that η increases during engulfment, whereas P decreases; conversely, an NBS with outward tapering can achieve high P, but it suffers from low η. Because the product of η and P determines ΔT*, the inverse correlation between them limits ΔT. To circumvent such limiting behavior, we propose an NBS shape with an outward bulge; by initially tapering outward, a bulged NBS permits higher P, and by subsequently tapering inward, it promotes high η as well. Importantly, we find that ΔT* is enhanced by more than a factor of 2 with an outward bulge of only 1 nm. We also find that the more ice-phobic an NBS is, the more efficiently it pins the ice–water interface, resulting in a higher ΔT. Furthermore, our findings shed light on how the NBS molecular characteristics influence ΔT* and suggest strategies for engineering the NBS to optimally resist engulfment by ice.

Antifreeze↗
DOE OSTI2022

Thermoelectric coolers for high-power-density 3D electronics heat management

Future advancements in three-dimensional (3D) electronics require robust thermal management methodology. Thermoelectric coolers (TECs) are reliable and solid-state heat pumping devices with high cooling capacity that can meet the requirements of emerging 3D microelectronic devices. In this work, we first provide the design of TECs for electronics cooling using a computational model and then experimentally validate the main predictions. Key device parameters such as device thickness, leg density, and contact resistance were studied to understand their influence on the performance of TECs. Our results show that it is possible to achieve high cooling power density through optimization of TE leg height and packing density. Scaling of TECs is shown to provide ultra-high cooling power density.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2025

Improving Longitudinal Impedance of Inductive Inserts

In this article, we discuss methods for improving the longitudinal impedance of inductive inserts used for space charge compensation in the proton storage ring (PSR) at Los Alamos Neutron Science Center (LANSCE) Facility. The PSR relies on inductive inserts to counteract the capacitive impedance produced by the space charge of the proton beam, which can otherwise lead to beam debunching. Existing inductive inserts, which utilize Toshiba M4C21A ferrite, have been effective but require heating to reduce resistive components that can cause instabilities at higher frequencies. This article explores the potential of alternative ferrite materials, specifically National Magnetics C2050, to enhance the performance of these inserts by reducing the need for heating and minimizing resistive impedance. Through both analytical modeling and CST Particle Studio simulations, it is demonstrated that optimized ferrite materials and geometries can significantly improve space charge compensation while mitigating instability risks, ultimately enhancing the performance of the PSR.

43 PARTICLE ACCELERATORS↗
DOE OSTI2023

Self-tuning wave energy converter (WEC) controller for changing sea states

Systems and methods for a WEC controller that uses a self-tuning proportional-integral control law prescribing motor torques to maximize electrical power generation and automatically tune the controller to maximize power absorption. In an embodiment, the controller may be part of any resonant WEC system. The control law relies upon an identified model of device intrinsic impedance to generate a frequency-domain estimate of the wave-induced excitation force and measurements of device velocities. The control law was tested in irregular sea-states that evolved over hours (a rapid, but realistic time-scale) and that changed instantly (an unrealistic scenario to evaluate controller response).

Bacelli, Giorgio↗
DOE OSTI2023

Validity condition for the local sheath impedance boundary condition and a nonlocal generalization

ICRF sheaths can cause unwanted interactions of high-power RF waves with material surfaces in magnetic fusion devices. In previous work, a local RF sheath impedance boundary condition (BC) was derived for use in ICRF codes together with a microscale (i.e., Debye or sheath width scale) model for obtaining the sheath impedance used in that BC. This local RF sheath BC matches the normal component of current and electrostatic potential across the sheath-plasma interface. Collapsing the matching conditions at the sheath-plasma interface to a BC depends on the assumption of scale separation, which can be violated when conditions along the local radius of curvature of the surface vary sufficiently rapidly. The validity condition is explored in this contribution, with special attention to the case where the magnetic field approaches being tangent to the surface. When the local sheath BC no longer applies, a non-local sheath BC is developed under the assumption of a more relaxed scale separation assumption. It is shown that the non-local sheath BC reduces to the previous local sheath BC under appropriate conditions. Furthermore, a surface-integrated sheath admittance parameter describes the 2D physics in the new BC.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Control-Oriented Modeling of Lithium-Ion Batteries

Battery management systems (BMSs), which monitor and optimize performance while ensuring safety, require control-oriented models, i.e., models tailored to the design and implementation of estimation and control algorithms. Physics-based electrochemical models describe detailed battery phenomena, but are too computationally intensive for use in estimation and control applications. Single particle models (SPMs), which retain some of the physics of electrochemical models, are often used for control-oriented battery modeling since they are computationally efficient; however, they are only valid over very low frequency ranges and C-rates. Empirical equivalent circuit models (ECMs) are also used for control-oriented battery modeling since they are computationally efficient and can describe battery behavior over wide frequency ranges; however, they provide no physical understanding of the battery and, therefore, have limited applicability. Further, fractional order terms (e.g., Warburg impedances) are often employed, making the models unwieldy for use in the time domain. This work provides a control-oriented battery model that combines the benefits of SPM and ECM models, while overcoming their limitations. The proposed model incorporates some of the battery physics found in electrochemical models, can easily be used in both the time and frequency domains, and describes battery behavior over its entire frequency range. A linearized single particle model, which incorporates key electrochemical parameters, is used for modeling battery physics at very low frequencies. For low frequencies, integer-order linear systems are used to approximate diffusion physics described by Warburg impedances, and high frequency behavior is modeled by the double layer capacitance effect. The proposed battery model is more computationally efficient than full electrochemical models since it does not require the solution of PDEs, is accurate for a wider frequency range than the SPM considered in this paper, and does not suffer from the unwieldiness and limited applicability of empirical ECMs. Finally, the model is validated in the time and frequency domains via a comparison to pseudo-two-dimensional (P2D) model simulations and experimental data.

25 ENERGY STORAGE↗
DOE OSTI2020

Experimental validation of solid oxide fuel cell polarization modeling: An LSM-YSZ/YSZ/Ni-YSZ case study

Polarization modeling based on the measured I-V curves is a useful tool for analyzing SOFC performance and diagnosing performance limitations. Using the polarization model, the overpotential of a cell is usually separated into different polarization contributions, including area specific ohmic polarization, activation polarization, and anodic and cathodic concentration polarizations. In this study, we aim to experimentally validate the accuracy of the polarization model. As a case study, anode-supported cells with LSM-YSZ/YSZ/Ni-YSZ configuration are used. By curve-fitting the I-V curves of a cell tested under different cathode oxygen partial pressures into the polarization model, the contributions of different polarization losses are quantified. To validate the polarization model, independent experiments/studies including electrochemical impedance spectroscopy, cathode kinetics study, ex-situ diffusivity measurement, and tortuosity measurement using 3D reconstructed anode are conducted. The results from polarization modeling and from validation studies are in good agreement, thereby validating the polarization model for SOFC performance analysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Problem with gradual absorption in MSD/MSC calculations

Replacing classical exciton model with the better founded Multistep Direct (MSD) and Multistep Compound (MSC) mechanisms has been impeded by incapability of the latter models to describe central part of the neutron emission spectra at incident neutron energies of about 14 MeV and above. We have ascribed this deficiency to the decrease of absorption to the MSC mechanism resulting from the concept of gradual absorption. We were able to obtain very good reproduction of experimentally measured neutron spectra using MSD/MSC calculations when this option was turned off. Such treatment is, however, at odds with the fundamental distinction between MSD and MSC mechanisms that should proceed through the chain of open (P-space) and closed (Q-space) configurations respectively. By blocking gradual absorption we allow the first stage of MSC to be fully populated from the incident channel that at higher incident energies is impossible. We discuss various attempts of addressing the problem that, so far, remains open. In addition, we present an evidence for much tighter spin distribution of particle-hole states than normally assumed.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2026

Adaptation of virtual synchronous generators to dynamic conditions in power grids

Virtual synchronous generators (VSGs) are widely adopted as grid-forming controls for inverter-based resources. However, when grid conditions vary significantly as characterized by changes in short-circuit ratio (SCR) and the reactance-to-resistance (X/R) ratio, fixed-gain designs and the commonly used P–Q decoupling assumption can become inaccurate. Such conditions can degrade transient power performance, leading to oscillations, prolonged settling, and overshoot, particularly in stiff-grid operating points. This paper quantifies how grid strength and impedance-dependent coupling affect the active–reactive power dynamics of a conventional VSG over a broad range of SCR and X/R values. An adaptive VSG tuning framework is then developed by combining (i) a coupling-explicit, impedance-parameterized state-space model to enable systematic controller synthesis, (ii) a full-state-feedback law designed via pole placement to meet prescribed damping and settling-time specifications, and (iii) a physics-informed neural network (PINN)–based online grid-impedance estimator that updates controller gains in real time as grid conditions vary. Offline simulations in MATLAB/Simulink and real-time validation on an OPAL-RT platform show that the proposed method preserves consistent damping and settling behavior with reduced overshoot across wide SCR and X/R ranges, compared with fixed-gain VSG baselines.

Adaptive control↗
DOE OSTI2024

Problem with gradual absorption in MSD/MSC calculations

Replacing classical exciton model with the better founded Multi-step Direct (MSD) and Multistep Compound (MSC) mechanisms has been impeded by incapability of the latter models to describe central part of the neutron emission spectra at incident neutron energies of about 14 MeV and above. We have ascribed this deficiency to the decrease of absorption to the MSC mechanism resulting from the concept of gradual absorption. We were able to obtain very good reproduction of experimentally measured neutron spectra using MSD/MSC calculations when this option was turned off. Such treatment is, however, at odds with the fundamental distinction between MSD and MSC mechanisms that should proceed through the chain of open (P-space) and closed (Q-space) configurations respectively. By blocking gradual absorption we allow the first stage of MSC to be fully populated from the incident channel that at higher incident energies is impossible. We discuss various attempts of addressing the problem that, so far, remains open. In addition, we present an evidence for much tighter spin distribution of particle-hole states than normally assumed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Assessing the vulnerability of solar inverters to EMPs: Port testing, PCI modeling, and protection strategies

Renewable energy sources are becoming an ever-larger contributor to the power grid. These renewable energy sources depend upon the power electronic devices, specifically inverters, being essential for connecting Photovoltaic (PV) generation to the grid. However, the Electromagnetic Pulses (EMPs) caused by the high-altitude nuclear explosions can generate fast broad-band pulses with nanosecond rise time, potentially causing damage or destruction to electronic components. To assess the vulnerability of PV inverters to high-altitude EMPs, the port testing and Pulsed Current Injection (PCI) modeling schemes are proposed based on the port impedance analysis. Wide-band frequency measurements are achieved by fusing impedance results from three vector network analyzers. Then, a PCI model is used to simulate the induced response to EMP, with two typical immunity levels of EC5 and EC8 tested. Here, the experiment successfully excites the induced voltage and current under EMP, where the voltage and current can reach 1500V/40A and 8000V/150Aunder EC5 andEC8, respectively. The port vulnerability analysis results demonstrate that only some ports can survive under EC5. To defend against the impact of EMP, three protection strategies are discussed.

42 ENGINEERING↗
DOE OSTI2024

Impact of beam coupling impedance on crab cavity noise induced emittance growth

Crab cavities will be deployed as a part of the High Luminosity Large Hadron Collider (HL-LHC) upgrade to mitigate the luminosity reduction induced by the crossing angle at the main experiments (ATLAS and CMS). Two prototype crab cavities have been installed in the CERN Super Proton Synchrotron (SPS) in 2018 for studies with proton beams. An issue of concern is the transverse emittance growth induced by noise in the crab cavity radio frequency (rf) system, which is anticipated to limit the performance of the HL-LHC. In measurements conducted in the SPS in 2018, the crab cavity noise-induced emittance growth was measured to be a factor of 4 lower than predicted from the existing analytical models. In this paper, it is shown that the observed discrepancy is explained by damping effects from the beam coupling impedance, which were not included in the models up to now. Using the van Kampen mode approach, a new theory is developed, suggesting that the impedance can separate the coherent tune from the incoherent spectrum leading to an effective reduction of the crab cavity rf noise-induced emittance growth. This mechanism is validated in tracking simulations using the SPS impedance model as well as in dedicated experimental measurements conducted in the SPS in 2022. The implications for the HL-LHC project are discussed. Published by the American Physical Society 2024

Physics↗
DOE OSTI2026

Non-Invasive Electrode Impedance Estimation for Optimized Charge Profile Parameterization of Lithium-Ion Batteries

This work presents a non-invasive method for parameterizing a physically motivated equivalent circuit model of lithium-ion batteries using operando electrochemical impedance spectroscopy and time-domain data. The proposed model consists exclusively of linear circuit elements, enabling computationally efficient simulation and real-time implementation on battery management system chips. By integrating frequency- and time-domain measurements, the model accurately estimates internal states such as the negative electrode potential, achieving a root mean square error of 12.3 mV during fast charging validation. Parameterization requires only rate tests with sinusoidal perturbations at three different ambient temperatures, making the approach experimentally accessible. The model reveals key insights into battery behavior, including rate-dependent overpotentials primarily governed by charge transfer kinetics at the positive electrode, and temperature-dependent impedance contributions from both charge transfer and solid-state diffusion processes. Validation using reference electrodes confirms the model’s ability to detect lithium plating onset and reproduce impedance behavior across a wide range of operating conditions. The approach enables in situ optimization of fast charging profiles and lays the foundation for future extensions incorporating aging effects and plating dynamics.

25 ENERGY STORAGE↗
DOE OSTI2020

Effect of net direct current on the properties of radio frequency sheaths: simulation and cross-code comparison

In order to understand, predict and control ion cyclotron range of frequency (ICRF) interactions with tokamak scrape-off layer plasmas, computational tools which can model radio frequency (RF) sheaths are needed. In particular, models for the effective surface impedance and DC rectified sheath potentials may be coupled with full wave RF simulation codes to predict self-consistent wave fields near surfaces and the resulting power dissipation and plasma-material interactions from ion sputtering. In this study, previous work assuming zero net DC current flow through the sheath is generalized to allow the surface to collect net positive or negative current, as is often observed in experiments. The waveforms, DC potential and RF admittance are investigated by means of analytical theory, nonlinear fluid and particle-in-cell (PIC) codes. Cross-code comparisons provide detailed model verification and elucidate the roles of ion and electron kinetics. When the sheath draws negative (positive) DC current, the voltage rectification is reduced (increased) compared with the zero-current case, and the magnitude of both the real and imaginary parts of the admittance are increased (reduced). In conclusion, a previous four-input parametrization of the sheath rectification and admittance properties is generalized to include a fifth parameter describing the DC sheath current.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Quantitative, trait-based microbial ecology to accurately model the impacts of nitrogen deposition on soil carbon cycling in the Anthropocene (Final Technical Report)

Atmospheric nitrogen pollution has altered fundamental soil processes, challenging our understanding of the extent to which soils will continue to sequester carbon and slow the pace of future environmental change. While most evidence shows that increases in soil nitrogen have enhanced carbon storage in temperate forests, it remains unclear whether these effects will persist as nitrogen pollution continues to decline. Moreover, there remains uncertainty as to why some forests gain more carbon in response to nitrogen pollution than others. At the heart of this knowledge gap is a failure to link nitrogen–induced shifts in microbial biodiversity with gains or losses in their functional ability to decompose, assimilate, and ultimately stabilize soil carbon. Given that this uncertainty impedes the ability of predictive models to project future soil carbon stocks, there is a critical need to determine how key microbial traits drive soil carbon responses to nitrogen pollution. As such the goals of this project were to: (1) Quantify variation in taxon–specific and community–level microbial traits across gradients in microbial community composition, mycorrhizal symbioses, and nitrogen availability. (2) Integrate empirical data into a novel predictive framework that enhances our ability to project the regional soil carbon consequences of historical nitrogen pollution in temperate forests.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Impact assessment of geomagnetic induced current neutral blocking devices with power electronics sources on distance relay for 230 kV transmission lines

Electrical grids increased the integration of power electronics sources onto transmission lines. In addition, recent reports show a significant rise in geomagnetic storms occurring in 2024. These geomagnetic storms can affect transmission lines by inducing electrical currents within them, potentially causing power outages due to overloaded power transformers. Geomagnetic induced current neutral blocking devices (GIC-NBDs) are capacitors on the ground of wye power transformers, to avoid damage caused by geomagnetic storms. The integration of distance relays and transmission lines with power electronics sources and GIC-NBDs needs to be studied to observe if GIC-NBDs and power electronics sources could adversely affect operation of the electrical grid. In this analysis, the effect of 2 MW power electronics sources and GIC-NBDs on distance relays is assessed for different 230 kV transmission line lengths in radial and nonradial power systems. The simulations measured the apparent impedances, with different electrical faults. Results for a typical 2,650 μF GIC-NBD application were presented on impedance plots, and the distance relay model operations were assessed. In conclusion, the tests for radial and nonradial power systems showed the behavior of the distance elements and source impedance ratios, assessing the effect of power electronics sources and GIC-NBDs on 230 kV transmission lines.

Distance relays↗