Search NASA⌕ Search

SEARCH · Search NASA

Results for “inorganic”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS2000

An Examination of the Inorganic Chlorine Budget in the Lower Stratosphere

We use the first simultaneous in situ measurements of ClONO2, ClO, and HCl acquired using the NASA ER-2 aircraft during the Photochemistry of Ozone Loss in the Arctic Region in Summer (POLARIS) mission to test whether these three compounds quantitatively account for total inorganic chlorine (Cly) in the lower stratosphere in 1997. We find (ClO + ClONO2 + HCl)/Cly = 0.92 +/- 0.10, where Cly is inferred from in situ measurements of organic chlorine source gases. These observations are consistent with our current understanding of the budget and partitioning of Cly in the lower stratosphere. We find no evidence in support of missing inorganic chlorine species that compose a significant fraction of Cly. We apply the analysis to earlier ER-2 observations dating from 1991 to investigate possible causes of previously observed discrepancies in the inorganic chlorine budget. Using space shuttle, satellite, balloon, and aircraft measurements in combination with ER-2 data, we find that the discrepancy is unlikely to have been caused by missing chlorine species or an error in the photolysis rate of chlorine nitrate. We also find that HCl/Cly is not significantly controlled by aerosol surface area density in the lower stratosphere.

Bonne, G. P.↗
NASA NTRS1996

Recycle of Inorganic Nutrients for Hydroponic Crop Production Following Incineration of Inedible Biomass

Recovery of resources from waste streams is essential for future implementation and reliance on a regenerative life support system. The major waste streams of concern are from human activities and plant wastes. Carbon, water and inorganics are the primary desired raw materials of interest. The goal of resource recovery is maintenance of product quality to insure support of reliable and predictable levels of life support function performance by the crop plant component. Further, these systems must be maintained over extended periods of time, requiring maintenance of nutrient solutions to avoid toxicity and deficiencies. Today, reagent grade nutrients are used to make nutrient solutions for hydroponic culture and these solutions are frequently changed during the life cycle or sometimes managed for only one crop life cycle. The focus of this study was to determine the suitability of the ash product following incineration of inedible biomass as a source of inorganic nutrients for hydroponic crop production. Inedible wheat biomass was incinerated and ash quality characterized. The incinerator ash was dissolved in adequate nitric acid to establish a consistent nitrogen concentration in all nutrient solution treatments. Four experimental nutrient treatments were included: control, ash only, ash supplemented to match control, and ash only quality formulated with reagent grade chemicals. When nutrient solutions are formulated using only ash following-incineration of inedible biomass, a balance in solution is established representing elemental retention following incineration and nutrient proportions present in the original biomass. The resulting solution is not identical to the control. This imbalance resulted in suppression of crop growth. When the ash is supplemented with nutrients to establish the same balance as in the control, growth is identical to the control. The ash appears to carry no phytotoxic materials. Growth in solution formulated with reagent grade chemicals but matching the quality of the ash only treatment resulted in growth similar to that of the ash only treatment. The ash product resulting from incineration of inedible biomass appears to be a suitable form for recycle of inorganic nutrients to crop production.

Bubenheim, David L.↗
NASA NTRS1989

Distribution of inorganic species in two Antarctic cryptoendolithic microbial communities

Chemical differences were noted between two Antarctic cryptoendolithic (hidden within rock) microenvironments colonized by different microbial communities. Microenvironments dominated by cyanobacteria (BPC) had a higher pH (pH 7-8) than those dominated by lichen (LTL) (pH 4.5-5.5). In order to understand the interactions between the microbiota and the inorganic environment, the inorganic environment was characterized. Water-soluble, carbonate-bound, metal-oxide, organically bound, and residual inorganic species were sequentially extracted from rock samples by chemical means. Each fraction was then quantified using inductively coupled plasma atomic emission spectrometry. BPC contained much more water-soluble and carbonate-bound Ca and Mg than LTL. Metal-oxide species of Al, Fe, and Mn were more abundant in LTL than BPC. Metal oxides appeared to be mobilized (in the order Mn > Fe > Al) from the LTL lichen zone but remained immobile in BPC sandstone. The distribution of K and P bound to metal oxide reflected the distribution of iron oxide in LTL, an indication of the importance of iron in controlling the availability of nutrients in this ecosystem. Metal oxides in turn were likely controlled or influenced by organic matter associated with the lichen community. Despite overall depletion of Fe, Al, and K in the lichen zone, SEM X-ray analysis showed that they were enriched in fungal hyphae. Water-soluble P was present despite the presence of metal oxides, which sequester phosphate. This has biological relevance since P is an essential nutrient.

NASA Program Exobiology↗
NASA NTRS1990

Effect of ammonium sulfate, ammonium chloride and root-zone acidity on inorganic ion content of tobacco

Tobacco plants (Nicotiana tabacum L. cv NC82) were supplied with (NH4)2SO4 or NH4Cl at root-zone pH of 6.0 and 4.5 in hydroponic culture for 28 days. Dry matter accumulation, total N and C content, and leaf area and number were not affected by the NH4+ source or root-zone pH. Plants supplied with NH4Cl accumulated up to 1.2 mM Cl g DW-1, but accumulated 37% less inorganic H2PO4- and 47% less SO4(2-) than plants supplied with (NH4)2SO4. The large Cl- accumulation resulted in NH4Cl- supplied plants having a 31% higher inorganic anion (NO3-, H2, PO4-, SO4(2-), and Cl-) charge. This higher inorganic anion charge in the NH4Cl-supplied plants was balanced by a similar increase in K+ charge. Plants supplied with NH4Cl accumulated greater concentrations of Cl- in leaves (up to 5.1% of DW) than plants supplied with (NH4)2SO4 (less than -% DW). Despite the high Cl- concentration of leaves in NH4Cl supplied plants, these plants showed no symptoms of Cl- toxicity. This demonstrates that toxicity symptoms are not due solely to an interaction between high Cl- concentration in tissue and NH4+ nutrition. The increase in root-zone acidity to pH 4.5 from 6.0 did not induce toxicity symptoms.

NASA Program CELSS↗
NASA NTRS2006

Formation of "Chemically Pure" Magnetite from Mg-Fe-Carbonates Implications for the Exclusively Inorganic Origin of Magnetite and Sulfides in Martian Meteorite ALH84001

Magnetite and sulfides in the black rims of carbonate globules in Martian meteorite ALH84001 have been studied extensively because of the claim by McKay et al. that they are biogenic in origin. However, exclusively inorganic (abiotic) processes are able to account for the occurrence of carbonate-sulfide-magnetite assemblages in the meteorite. We have previously precipitated chemically zoned and sulfide-bearing carbonate globules analogous to those in ALH84001 (at less than or equal to 150 C) from multiple fluxes of variable-composition Ca-Mg-Fe-CO2-S-H2O solutions. Brief heating of precipitated globules to approx. 470 C produced magnetite and pyrrhotite within the globules by thermal decomposition of siderite and pyrite, respectively. We have also shown that morphology of magnetite formed by inorganic thermal decomposition of Fe-rich carbonate is similar to the morphology of so-called biogenic magnetite in the carbonate globules of ALH84001. Magnetite crystals in the rims of carbonate globules in ALH84001 are chemically pure [Note: "Chemically pure" is defined here as magnetite with Mg at levels comparable or lower than Mg detected by [8] in ALH84001 magnetite]. A debate continues on whether or not chemically pure magnetite can form by the thermal decomposition of mixed Mg-Fe-carbonates that have formed under abiotic conditions. Thomas-Keprta et al. argue that it is not possible to form Mg-free magnetite from Mg-Fe-carbonate based on thermodynamic data. We previously suggested that chemically pure magnetite could form by the thermal decomposition of relatively pure siderite in the outer rims of the globules. Mg-Fe-carbonates may also thermally decompose under conditions conducive for formation of chemically pure magnetite. In this paper we show through laboratory experiments that chemically pure magnetite can form by an inorganic process from mixed Mg-Fe-carbonates.

Golden, D. C.↗
NASA NTRS2017

BrO and Inferred Bry Profiles over the Western Pacific: Relevance of Inorganic Bromine Sources and a Bry Minimum in the Aged Tropical Tropopause Layer

We report measurements of bromine monoxide (BrO) and use an observationally constrained chemical box model to infer total gas-phase inorganic bromine (Br(sub y)) over the tropical western Pacific Ocean (tWPO) during the CONTRAST field campaign (January-February 2014). The observed BrO and inferred Bry profiles peak in the marine boundary layer (MBL), suggesting the need for a bromine source from sea-salt aerosol (SSA), in addition to organic bromine (CBry ). Both profiles are found to be C-shaped with local maxima in the upper free troposphere (FT). The median tropospheric BrO vertical column density (VCD) was measured as 1.6 x 10(exp 13) molec cm(exp -2), compared to model predictions of 0.9 x 10(exp 13) molec cm(exp -2) in GEOS-Chem (CBr(sub y) but no SSA source), 0.4 x 10(exp 13) molec cm(exp -2) in CAM-Chem (CBr(sub y) and SSA), and 2.1 x 10(exp 13) molec cm(exp -2) in GEOS-Chem (CBry and SSA). Neither global model fully captures the Cshape of the Br(sun y) profile. A local Br(sub y) maximum of 3.6 ppt (2.9-4.4 ppt; 95% confidence interval, CI) is inferred between 9.5 and 13.5 km in air masses influenced by recent convective outflow. Unlike BrO, which increases from the convective tropical tropopause layer (TTL) to the aged TTL, gas-phase Br(sub y) decreases from the convective TTL to the aged TTL. Analysis of gas-phase Br(sub y) against multiple tracers (CFC-11, H2O/O3 ratio, and potential temperature) reveals a Br(sub y) minimum of 2.7 ppt (2.3-3.1 ppt; 95% CI) in the aged TTL, which agrees closely with a stratospheric injection of 2.6 +/- 0.6 ppt of inorganic Br(sub y) (estimated from CFC-11 correlations), and is remarkably insensitive to assumptions about heterogeneous chemistry. Bry increases to 6.3 ppt (5.6-7.0 ppt; 95% CI) in the stratospheric "middleworld" and 6.9 ppt (6.5-7.3 ppt; 95% CI) in the stratospheric "overworld". The local Br(sub y) minimum in the aged TTL is qualitatively (but not quantitatively) captured by CAM-Chem, and suggests a more complex partitioning of gas-phase and aerosol Br(sub y) species than previously recognized. Our data provide corroborating evidence that inorganic bromine sources (e.g., SSA-derived gas-phase Br(sub y) ) are needed to explain the gas-phase Br(sub y) budget in the upper free troposphere and TTL. They are also consistent with observations of significant bromide in Upper Troposphere-Lower Stratosphere aerosols. The total Br(sub y) budget in the TTL is currently not closed, because of the lack of concurrent quantitative measurements of gas-phase Br(sub y) species (i.e., BrO, HOBr, HBr, etc.) and aerosol bromide. Such simultaneous measurements are needed to (1) quantify SSA-derived Br(sub y) in the upper FT, (2) test Br(sub y) partitioning, and possibly explain the gas-phase Br(sub y) minimum in the aged TTL, (3) constrain heterogeneous reaction rates of bromine, and (4) account for all of the sources of Br(sub y) to the lower stratosphere.

Atmospheric Chemistry; bromine; troposphere; CONTR↗
DOE OSTI2024

Effects of Ligand Chemistry on Ion Transport in 2D Hybrid Organic–Inorganic Perovskites

2D hybrid organic–inorganic perovskites are potentially promising materials as passivation layers that can enhance the efficiency and stability of perovskite photovoltaics. The ability to suppress ion transport is proposed as a stabilization mechanism, yet an effective characterization of relevant modes of halide diffusion in 2D perovskites is nascent. In light of this knowledge gap, molecular dynamics simulations with enhanced sampling and experimental validation to systematically characterize how ligand chemistry in seven (R-NH 3 ) 2 PbI 4 systems impacts halide diffusion, particularly in the out-of-plane direction is combined. It is found that increasing stiffness and length of ligands generally inhibits ion transport, while increasing ligand polarization generally enhances it. Structural and energetic analyses of the migration pathways provide quantitative explanations for these trends, which reflect aspects of the disorder of the organic layer. Overall, this mechanistic analysis greatly enhances the current understanding of halide migration in 2D hybrid organic–inorganic perovskites and yields insights that can inform the design of future passivation materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Spatiotemporal Studies of Soluble Inorganic Nanostructures with X‐rays and Neutrons

This Review addresses the use of X-ray and neutron scattering as well as X-ray absorption to describe how inorganic nanostructured materials assemble, evolve, and function in solution. We first provide an overview of techniques and instrumentation (both large user facilities and benchtop). We review recent studies of soluble inorganic nanostructure assembly, covering the disciplines of materials synthesis, processes in nature, nuclear materials, and the widely applicable fundamental processes of hydrophobic interactions and ion pairing. Reviewed studies cover size regimes and length scales ranging from sub-Ångström (coordination chemistry and ion pairing) to several nanometers (molecular clusters, i.e. polyoxometalates, polyoxocations, and metal-organic polyhedra), to the mesoscale (supramolecular assembly processes). Reviewed studies predominantly exploit 1) SAXS/WAXS/SANS (small- and wide-angle X-ray or neutron scattering), 2) PDF (pair-distribution function analysis of X-ray total scattering), and 3) XANES and EXAFS (X-ray absorption near-edge structure and extended X-ray absorption fine structure, respectively). While the scattering techniques provide structural information, X-ray absorption yields the oxidation state in addition to the local coordination. Our goal for this Review is to provide information and inspiration for the inorganic/materials science communities that may benefit from elucidating the role of solution speciation in natural and synthetic processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Exploring the Role of Inorganic and Organic Interfaces on CO 2 and CH 4 Partitioning: Case Study of Silica, Illite, Calcite, and Kerogen Nanopores on Gas Adsorption and Nanoscale Transport Behaviors

The adsorption, partitioning, and diffusion of CO 2 and CH 4 in organic–inorganic pores composed of kerogen with silica, illite, or calcite are studied using density functional theory and classical molecular dynamics simulations. The adsorption and partitioning behavior of CO 2 and CH 4 molecules is found to be a function of chemistry of the solid interface, pore size, and surface area. CO 2 molecules are preferentially adsorbed compared to CH 4 molecules on silica, illite, calcite, and kerogen surfaces due to significant contributions of electrostatic interactions with the atoms of the associated surfaces. CO 2 and CH 4 molecules display higher adsorption energy on calcite and silica compared to those on illite and kerogen because of enhanced interactions with the positively charged calcium ions on the calcite surface and the hydroxyl group (-OH) on the silica surface. Enhanced internal nanopores and the availability of adsorption active sites in illite and kerogen matrices aid in higher partitioning of the gas molecules into these pores. CO 2 has a significant influence on the clustering and swelling of kerogen fragments compared to CH 4 . Higher CO 2 adsorption on inorganic and kerogen surfaces results in lower overall self-diffusivities compared to CH 4 . This study illustrates surface and pore size controls on the adsorption, partitioning, and self-diffusivities of CO 2 and CH 4 at conditions relevant for subsurface energy applications. The chemistry of the surfaces along with the availability of internal pores and active adsorption sites influences the adsorption behavior of gases. Our results suggest that CO 2 stored in depleted gas reservoirs may preferentially inhabit nanoconfined pores.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Determination of Total, Organic, and Inorganic Carbon in Biological Cultures and Liquid Fraction Process Samples

This procedure describes a method for analyzing dissolved and suspended total carbon, in organic and inorganic form in biological cultures, in the presence or absence of cells, and liquid fraction conversion process samples. This method calculates total organic carbon by subtraction of inorganic carbon, derived from sample acidification, from total dissolved carbon by combustion at 680°C with detection of derived gaseous CO 2 by a non-dispersive infrared (NDIR) sensor. The inclusion of details on a process step of heat treating biologically active samples before analysis can potentially halt biological activity, preserving carbon stores and allowing for accurate quantification of the carbon content at the time of sample collection.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Vapor‐Phase Infiltrated Organic–Inorganic Positive‐Tone Hybrid Photoresist for Extreme UV Lithography

Abstract Continuing extreme downscaling of semiconductor devices, essential for high performance and energy efficiency of future microelectronics, hinges on extreme ultraviolet lithography (EUVL) and addressing associated challenges. One of such challenges is a need for improved EUV photoresists featuring simultaneously high sensitivity, resolution, and etch selectivity. Here, a new, positive‐tone, organic–inorganic hybrid EUV photoresist is demonstrated that delivers a high‐resolution EUVL and electron‐beam lithography (EBL) patterning capability combined with high sensitivity and etch resistance. The new resist, poly(methyl methacrylate) infiltrated with indium oxide (PMMA‐InO x ), is synthesized via vapor‐phase infiltration (VPI), a material hybridization technique derived from atomic layer deposition. The weak binding of the gaseous indium precursor, trimethylindium, to the carbonyl group in PMMA allows the synthesis of hybrids with inorganic content distributed uniformly in the resist, enabling high EUVL and EBL sensitivities (18 mJ cm −2 and 300 µC cm −2 , respectively) and high‐resolution positive‐tone EUVL patterning (e.g., 40 nm half‐pitch line‐space and 50 nm diameter contact hole patterns) with high Si etch selectivity (>30–40). The low exposure doses required to pattern the PMMA‐InO x hybrid resist, high etch resistance, and processing strategies, which are developed, can pave the way for using infiltration‐synthesized hybrid thin films as reliable positive‐tone EUV photoresists for future semiconductor patterning.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Unveiling the Fatigue Behavior of 2D Hybrid Organic–Inorganic Perovskites: Insights for Long-Term Durability

2D hybrid organic–inorganic perovskites (HOIPs) are commonly found under subcritical cyclic stresses and suffer from fatigue issues during device operation. However, their fatigue properties remain unknown. Here, the fatigue behavior of (C 4 H 9 -NH 3 ) 2 (CH 3 NH 3 ) 2 Pb 3 I 10 , the archetype 2D HOIP, is systematically investigated by atomic force microscopy (AFM). It is found that 2D HOIPs are much more fatigue resilient than polymers and can survive over 1 billion cycles. 2D HOIPs tend to exhibit brittle failure at high mean stress levels, but behave as ductile materials at low mean stress levels. These results suggest the presence of a plastic deformation mechanism in these ionic 2D HOIPs at low mean stress levels, which may contribute to the long fatigue lifetime, but is inhibited at higher mean stresses. The stiffness and strength of 2D HOIPs are gradually weakened under subcritical loading, potentially as a result of stress-induced defect nucleation and accumulation. The cyclic loading component can further accelerate this process. The fatigue lifetime of 2D HOIPs can be extended by reducing the mean stress, stress amplitude, or increasing the thickness. These results can provide indispensable insights into designing and engineering 2D HOIPs and other hybrid organic–inorganic materials for long-term mechanical durability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Mechanical and physical properties of inorganic polymer cement made of iron-rich laterite and lateritic clay: A comparative study

In this work, two different laterites (iron contents of 13.07 and 49.34 wt%, respectively, for lateritic clay, LAC, and iron-rich laterite, LAI) were selected and calcined at 600 °C. The obtained calcined laterites, namely LAI600 and LAC600, were separately mixed with an alkaline solution (silicate modulus of 1.35) or an acidic solution (phosphoric acid solution at pH ≤ 2) for the synthesis of inorganic polymer products. The fabricated products were cured at 20 °C (ambient) and 40 °C (oven). The obtained results showed that the compressive strength of each series of alkaline-based inorganic polymer binder increased with ageing time (7 and 28 days) for room temperature curing, while the reverse trend was noted for oven-cured specimens. The best mechanical performance was obtained when using a phosphoric acid solution, 38 and 52 ± 1 MPa; 62 and 65 ± 1 MPa at 28 days for LAC and LAI respectively. It appeared that a higher iron content within the laterite contributed to an increase in the compressive strength under acidic conditions (LAI (59 MPa) > LAC (48 MPa)) compared to the behavior obtained under alkaline conditions (LAI (6 MPa) < LAC (29 MPa)). Accordingly, the acidic products exhibited a dense structure (with lower porosity) and contained amorphous iron/aluminium phosphate phases such as berlinite (FePO{sub 4}), iron hydrogen phosphate hydrate (Fe{sub 3}H{sub 15}(PO{sub 4}){sub 8·}4H{sub 2}O), ferrowyllieite (AlFe{sub 2}Na{sub 2}(PO{sub 4}){sub 3}) and sodium iron phosphate (Na{sub 3}Fe{sub 2}(PO{sub 4}){sub 3}) arising from the alteration of iron minerals in an acidic medium, confirmed by Mössbauer spectroscopy and electron paramagnetic resonance spectroscopy.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Tuning bandgap and energy stability of Organic-Inorganic halide perovskites through surface engineering

Organohalide perovskite with a variety of surface structures and morphologies have shown promising potential owing to the choice of the type of heterostructure dependent stability. We systematically investigate and discuss the impact of 2-dimensional molybdenum-disulphide (MoS 2 ), molybdenum-diselenide (MoSe 2 ), tungsten-disulphide (WS 2 ), tungsten-diselenide (WSe 2 ), boron-nitiride (BN) and graphene monolayers on bandgap and energy stability of organic–inorganic halide perovskites. We found that MAPbI 3 deposited on BN-ML shows room temperature stability (-25 meV ~ 300 K) with an optimal bandgap of ~ 1.68 eV. The calculated absorption coefficient also lies in the visible-light range with a maximum of 4.9 × 10 4 cm –1 achieved at 2.8 eV photon energy. Furthermore, on the basis of our calculations, we suggest that the encapsulation of an organic–inorganic halide perovskite monolayers by semiconducting monolayers potentially provides greater flexibility for tuning the energy stability and the bandgap.

36 MATERIALS SCIENCE↗
DOE OSTI2022

All-Inorganic Open-Framework Chalcogenides, A 3 Ga 5 S 9 · x H 2 O ( A = Rb and Cs), Exhibiting Ultrafast Uranyl Remediation and Illustrating a Novel Post-Synthetic Preparation of Open-Framework Oxychalcogenides

Fast and effective uranyl sequestration is of interest to the nuclear industry. Recently layered chalcogenide materials have demonstrated fast, selective, and efficient sorption properties towards uranyl cations and the development and investigation of new types of chalcogenide materials continues to be of interest and represents an intriguing option for uranyl remediation. Three new all-inorganic A 3 Ga 5 S 9 ·xH 2 O (A = Rb, Rb/Cs, and Cs) open-framework chalcogenides were obtained via an in-situ alkali carbonate to alkali sulfide conversion process achieved under mild hydrothermal conditions. The structures of the all-inorganic open framework chalcogenides consist of a 2-fold interpenetrated diamond-like 3D framework containing pseudo-T 3 [Ga 10 S 20 ] 10– supertetrahedra. 48% of the structural volume is occupied by A + cations and water species, as established by single-crystal X-ray diffraction (SCXRD), infrared (IR) and energy-dispersive (EDS) spectroscopies. The dynamic nature of the A + cations and water molecules within the pores was investigated via single crystal X-ray diffraction as well as by IR spectroscopy monitored H 2 O to D 2 O exchange experiments. Framework stability was probed with post-synthetic treatment of A 3 Ga 5 S 9 ·xH 2 O (A = Rb and Cs) samples in acidic solutions that resulted in the formation of the oxysulfide (A/H) 3 Ga 5 S 9–y O y ·xH 2 O (A = Rb and Cs; y = 0–1), as shown by SCXRD and IR. Ion-exchange studies on A 3 Ga 5 S 9 ·xH 2 O (A = Rb and Cs) samples were carried out utilizing a uranyl acetate solution. The presence of the UO 2 2+ species in the ion-exchanged product was supported by IR and EDS spectroscopies. Batch method ion-exchange experiments on Cs 3 Ga 5 S 9 ·xH 2 O powder demonstrated fast kinetics with 95% uranyl removal from the uranyl acetate solution during the first minute, a maximum uranyl uptake capacity of 15mg/g, and the subsequent elution of uranyl species with KCl solution. Furthermore, the porous and dynamic nature of the A 3 Ga 5 S 9 ·xH 2 O framework coupled with effective UO 2 2+ ···S 2– bonding interactions makes it a good potential sorbent for uranyl remediation from aqueous media.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Structural Diversity and Tunable Emission in Hybrid Organic–Inorganic Copper(I) Bromides

Recently, hybrid organic−inorganic copper(I) metal halides have attracted global attention due to their intriguing optical properties and low-cost solution processability. In this work, we report three hybrid organic−inorganic copper(I) bromides, [TMPA] 2 [Cu 2 Br 4 ], [TMPA] 4 [Cu 6 Br 10 ], and [TMPA] 2 [Cu 4 Br 6 ], synthesized through a slow evaporation method using trimethylphenylammonium (TMPA + ) as the organic cation. By precise control of the CuBr and TMPABr precursors, different copper halide [Cu 2 Br 4 ] 2− , [Cu 6 Br 10 ] 4− , and [Cu 4 Br 6 ] 2− structural units can be obtained. [TMPA] 2 [Cu 2 Br 4 ], [TMPA] 4 [Cu 6 Br 10 ], and [TMPA] 2 [Cu 4 Br 6 ] demonstrate distinct blue, orange, and greenish-yellow light emission, respectively. The first two compounds have zero-dimensional (0D) crystal structures in centrosymmetric triclinic space group P-1 and monoclinic space group P2 1 /n. In contrast, [TMPA] 2 [Cu 4 Br 6 ] features a unique one-dimensional (1D) structure and crystallizes in the centrosymmetric monoclinic space group P2 1 /c. Consequently, the observed greenish-yellow emission of [TMPA] 2 [Cu 4 Br 6 ] is also unique, in contrast to the typical orange-red emission of 0D [Cu 4 Br 6 ]-based compounds. This work provides insights into the design of copper halide light emitters and emphasizes the influence of structural dimensionality on photoluminescence. The tunable optical properties suggest the potential of these materials for multicolor photopatterning, information encryption, and anticounterfeiting applications.

Anions↗
DOE OSTI2021

Charge Transfer Screening and Energy Level Alignment at Complex Organic–Inorganic Interfaces: A Tractable Ab Initio GW Approach

Complex organic–inorganic interfaces are important for device and sensing applications. Charge transfer doping is prevalent in such applications and can affect the interfacial energy level alignments (ELA), which are determined by many-body interactions. We develop an approximate ab initio many-body GW approach that can capture many-body interactions due to interfacial charge transfer. The approach uses significantly less resources than a regular GW calculation but gives excellent agreement with benchmark GW calculations on an F4TCNQ/graphene interface. We find that many-body interactions due to charge transfer screening result in gate-tunable F4TCNQ HOMO–LUMO gaps. We further predict the ELA of a large system of experimental interest—4,4'-bis(dimethylamino)bipyridine (DMAP-OED) on monolayer MoS 2 , where charge transfer screening results in an ~1 eV reduction of the molecular HOMO–LUMO gap. Comparison with a two-dimensional electron gas model reveals the importance of explicitly considering the intraband transitions in determining the charge transfer screening in organic–inorganic interface systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

In Situ Analysis of Electron-Induced Chemical Transformations in Vapor-Phase-Synthesized Al-Based Inorganic–Organic Hybrid Thin Films for EUV Resist Platform

The rapid advancement and stringent requirements of extreme ultraviolet (EUV) lithography technology necessitate the development of advanced photoresist systems for next-generation microelectronics. Recent studies have demonstrated that inorganic-based hybrid photoresists offer notable improvements in EUV sensitivity, etch resistance, and greater insusceptibility to pattern collapse compared to their purely organic counterparts. However, variations in the synthesis/coating approaches and chemistry of inorganic–organic photoresists can result in distinct exposure mechanisms. In this work, an Al-based hybrid thin film resist system synthesized via molecular (atomic) layer deposition (MLD or MALD) is explored, focusing on its electron-beam and EUV patterning mechanisms. The Al-based hybrid thin films are deposited using trimethylaluminum (TMA) and the organic precursor hydroquinone, exhibiting a saturated growth rate within the temperature range of 150–200°C. In diluted tetramethylammonium hydroxide (TMAH)-based developer solutions, the electron-irradiated Al-based hybrid thin film system behaves as a negative tone resist, achieving a sensitivity of 10.4 mC/cm 2 at 0.1 kV electron beam lithography (EBL). Chemical changes induced by electron exposure are also analyzed in this study using X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, and a unique infrared spectroscopy setup, revealing the potential cross-linking pathways. To further correlate the electron-induced chemical transformations with those mediated by EUV irradiations, a combination of X-ray photoemission electron microscopy/low-energy electron microscopy (XPEEM/LEEM) system is also employed. In conclusion, this study provides critical insights into the mechanisms underlying solubility switching and contributes to the design of advanced resist materials for EUV lithography.

36 MATERIALS SCIENCE↗