Search NASA⌕ Search

SEARCH · Search NASA

Results for “input files”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

General Rotorcraft Aeromechanical Stability Program (GRASP) version 1.03: User's manual

The Rotorcraft Dynamics Division, Aeroflightdynamics Directorate, U.S. Army Aviation Research and Technology Activity has developed the General Rotorcraft Aeromechanical Stability Program (GRASP) to perform calculations that will assess the stability of rotorcraft in hovering flight and ground contact conditions. The program is designed to be state-of-the-art, hybrid, finite-element/multibody code that can be applied to all existing and future helicopter configurations. While GRASP was specifically designed to solve rotorcraft stability problems, its innovative structure and formulation allow for application to a wide range of structures. This manual describes the preparation of the input file required by Version 1.03 of GRASP, the procedures used to invoke GRASP on the NASA Ames Research Center CRAY X-MP 48 computer, and the interpretation of the output produced by GRASP. The parameters used by the input file are defined, and summaries of the input file and the job control language are included.

Hopkins, A. Stewart↗

Wake Vortex Inverse Model User's Guide

NorthWest Research Associates (NWRA) has developed an inverse model for inverting landing aircraft vortex data. The data used for the inversion are the time evolution of the lateral transport position and vertical position of both the port and starboard vortices. The inverse model performs iterative forward model runs using various estimates of vortex parameters, vertical crosswind profiles, and vortex circulation as a function of wake age. Forward model predictions of lateral transport and altitude are then compared with the observed data. Differences between the data and model predictions guide the choice of vortex parameter values, crosswind profile and circulation evolution in the next iteration. Iterations are performed until a user-defined criterion is satisfied. Currently, the inverse model is set to stop when the improvement in the rms deviation between the data and model predictions is less than 1 percent for two consecutive iterations. The forward model used in this inverse model is a modified version of the Shear-APA model. A detailed description of this forward model, the inverse model, and its validation are presented in a different report (Lai, Mellman, Robins, and Delisi, 2007). This document is a User's Guide for the Wake Vortex Inverse Model. Section 2 presents an overview of the inverse model program. Execution of the inverse model is described in Section 3. When executing the inverse model, a user is requested to provide the name of an input file which contains the inverse model parameters, the various datasets, and directories needed for the inversion. A detailed description of the list of parameters in the inversion input file is presented in Section 4. A user has an option to save the inversion results of each lidar track in a mat-file (a condensed data file in Matlab format). These saved mat-files can be used for post-inversion analysis. A description of the contents of the saved files is given in Section 5. An example of an inversion input file, with preferred parameters values, is given in Appendix A. An example of the plot generated at a normal completion of the inversion is shown in Appendix B.

Lai, David↗

Model Data for the Mesh Convergence Study Demonstrating Benefits of Mixed-polyhedral Mesh in Integrated Hydrology Simulations

This archived model data is related to a study introducing a unique method that employs a stream-aligned mixed-polyhedral mesh to effectively and accurately represent river valleys, stream corridors, and narrow engineered channels in integrated hydrology simulations. The study finds that utilizing stream-aligned mixed-polyhedral meshes in integrated hydrology simulations achieves accuracy on par with a finely refined TIN-based mesh while markedly diminishing computational costs. This archive contains scripts and data files needed to generate the ATS model input, including mesh and ATS input files, for all mesh scenarios using the Watershed Workflow package. Additionally, this archive also provides key outputs from the model simulations that are used in the analysis and post-processing scripts to reproduce figures in the manuscript. The Watershed Workflow package is implemented in Python3. The Jupyter notebooks can be executed through multiple open-source tools, for example, Anaconda Jupyter Lab, VS Studio Code, etc. Other data files include CSV and HDF5 files, which can be read through Python scripts. The input files for the ATS model, open-source integrated hydrology, and transport model are in XML format and can be edited in any commonly used text editors.

54 ENVIRONMENTAL SCIENCES↗

Flow prediction for propfan engine installation effects on transport aircraft at transonic speeds

An Euler-based method for aerodynamic analysis of turboprop transport aircraft at transonic speeds has been developed. In this method, inviscid Euler equations are solved over surface-fitted grids constructed about aircraft configurations. Propeller effects are simulated by specifying sources of momentum and energy on an actuator disc located in place of the propeller. A stripwise boundary layer procedure is included to account for the viscous effects. A preliminary version of an approach to embed the exhaust plume within the global Euler solution has also been developed for more accurate treatment of the exhaust flow. The resulting system of programs is capable of handling wing-body-nacelle-propeller configurations. The propeller disks may be tractors or pushers and may represent single or counterrotation propellers. Results from analyses of three test cases of interest (a wing alone, a wing-body-nacelle model, and a wing-nacelle-endplate model) are presented. A user's manual for executing the system of computer programs with formats of various input files, sample job decks, and sample input files is provided in appendices.

Samant, S. S.↗

Developing and utilizing an Euler computational method for predicting the airframe/propulsion effects for an aft-mounted turboprop transport. Volume 1: Theory document

An Euler flow solver was developed for predicting the airframe/propulsion integration effects for an aft-mounted turboprop transport. This solver employs a highly efficient multigrid scheme, with a successive mesh-refinement procedure to accelerate the convergence of the solution. A new dissipation model was also implemented to render solutions that are grid insensitive. The propeller power effects are simulated by the actuator disk concept. An embedded flow solution method was developed for predicting the detailed flow characteristics in the local vicinity of an aft-mounted propfan engine in the presence of a flow field induced by a complete aircraft. Results from test case analysis are presented. A user's guide for execution of computer programs, including format of various input files, sample job decks, and sample input files, is provided in an accompanying volume.

Chen, H. C.↗

Dataset for scientific paper "Simulated plant‑mediated oxygen input has strong impacts on fine‑scale porewater biogeochemistry and weak impacts on integrated methane fluxes in coastal wetlands", a modeling study based on field observation at the tidal salt marshes of the Parker River Estuary, Massachusetts, United States

This dataset is the raw and processed data for the paper "Simulated plant ‑ mediated oxygen input has strong impacts on fine ‑ scale porewater biogeochemistry and weak impacts on integrated methane fluxes in coastal wetlands". This study investigated how plant-mediated oxygen input affects subsurface biogeochemical reactions of organic carbon degradation and the resulting methane emissions of coastal wetlands by model simulation. We used the subsurface geochemical simulator PFLOTRAN for the modeling, which produced the simulated changes in porewater chemical substances and methane emissions over 10 days under different scenarios of plant-mediated oxygen input.Specifically, this dataset contains: 1) the input files for PFLOTRAN of all simulation runs conducted in this study. Those files are with an extension of ".in", containing information of the biogeochemical reaction network (stoichiometry, reaction rate, Monod constants, etc), fluid flow rate and oxygen concentration in the fluid which together simulated the plant-mediated oxygen input, the configuration of artificial reactions that simulated the methane fluxes, etc. The PFLOTRAN input files are text files, which can be opened by NotePad, but running these input files will require proper installation of PFLOTRAN (instruction: https://documentation.pflotran.org/user_guide/how_to/installation/installation.html). 2) the raw and processed model output from PFLOTRAN of all simulation runs, and 3) the python scripts used to process the raw model output, including random allocation of root cells, converting raw data into organized formats, calculating the methane fluxes based on the model output, data visualization, etc. The raw and processed model output from PFLOTRAN are in .spydata format, which can be viewed with Python. and 3) the python scripts for data processing and analysis are programming scripts, which can be opened with Python.This modeling work, in particular the model parameterization of root density and initial conditions of porewater concentrations of biogeochemical substances, was based on field measurements at the salt marsh of the Upper Parker River Estuary, Massachusetts, United States.

54 ENVIRONMENTAL SCIENCES↗

(U) A Tool to Set Up an MCNP6 Input to Use Correlated Sampling with Batch Statistics

Correlated sampling using batch statistics with MCNP6’s tally fluctuation charts (TFCs) is a powerful means of reducing the statistical uncertainties of various combinations of tallies. Because MCNP6 prints a maximum of 20 entries in the TFCs, at least five inputs must be run to obtain the recommended number of at least 100 batches. A new software tool, MAKE_COSUBS, reads an MCNP6 input file and sets up a sequence of input files to be run. The user runs MAKE_COSUBS for the unperturbed and all perturbed MCNP6 inputs, runs MCNP6 for the inputs, and finally analyzes the outputs using COSUBS.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Recent Improvements To CINDER2008 and Activation Analysis Tools

CINDER2008 is a transmutation code that calculates induced radioactivity for either reactor- or accelerator-driven radiation sources. Several Perl scripts have been developed to treat multi-cell problems in combination with either the radiation transport code MCNPX or a special version of MCNPX that writes residual nuclide tallies from model-based physics directly in the MCNPX output file. These scripts simplify the preparation of CINDER input, and can use CINDER output to prepare the source term for a subsequent MCNPX run to calculate dose rates due to activated material. In addition, these scripts support calculations with the transmutation codes SP-FISPACT and ORIHET-3. A number of improvements have been made to CINDER, its data libraries, and the Perl scripts, including (1) substantial corrections to the data libraries, (2) inclusion of recent revisions to USDOE HC-2/HC-3 thresholds and the corresponding thresholds for regulatory bodies in other countries, (3) the ability to run the CINDER accident analysis tool through the script input file, and (4) an easier way to write the script input file when treating a large number of cells. Some features of running CINDER and a number of example problems are discussed.

Micklich, Bradley J.↗

LIM1TR: Lithium-Ion Modeling with 1-D Thermal Runaway (V.1.0)

LIM1TR (Lithium-Ion Modeling with 1-D Thermal Runaway) is an open-source code that uses the finite volume method to simulate heat transfer and chemical kinetics on a quasi 1-D domain. The target application of this software is to simulate thermal runaway in systems of lithium-ion batteries. The source code for LIM1TR can be found at https://github.com/ajkur/lim1tr. This user guide details the steps required to create and run simulations with LIM1TR starting with setting up the Python environment, generating an input file, and running a simulation. Additional details are provided on the output of LIM1TR as well as extending the code with custom reaction models. This user guide concludes with simple example analyses of common battery thermal runaway scenarios. The corresponding input files and processing scripts can be found in the “Examples” folder in the on-line repository, with select input files included in the appendix of this document.

25 ENERGY STORAGE↗

Application Program Interface for the Orion Aerodynamics Database

The Application Programming Interface (API) for the Crew Exploration Vehicle (CEV) Aerodynamic Database has been developed to provide the developers of software an easily implemented, fully self-contained method of accessing the CEV Aerodynamic Database for use in their analysis and simulation tools. The API is programmed in C and provides a series of functions to interact with the database, such as initialization, selecting various options, and calculating the aerodynamic data. No special functions (file read/write, table lookup) are required on the host system other than those included with a standard ANSI C installation. It reads one or more files of aero data tables. Previous releases of aerodynamic databases for space vehicles have only included data tables and a document of the algorithm and equations to combine them for the total aerodynamic forces and moments. This process required each software tool to have a unique implementation of the database code. Errors or omissions in the documentation, or errors in the implementation, led to a lengthy and burdensome process of having to debug each instance of the code. Additionally, input file formats differ for each space vehicle simulation tool, requiring the aero database tables to be reformatted to meet the tool s input file structure requirements. Finally, the capabilities for built-in table lookup routines vary for each simulation tool. Implementation of a new database may require an update to and verification of the table lookup routines. This may be required if the number of dimensions of a data table exceeds the capability of the simulation tools built-in lookup routines. A single software solution was created to provide an aerodynamics software model that could be integrated into other simulation and analysis tools. The highly complex Orion aerodynamics model can then be quickly included in a wide variety of tools. The API code is written in ANSI C for ease of portability to a wide variety of systems. The input data files are in standard formatted ASCII, also for improved portability. The API contains its own implementation of multidimensional table reading and lookup routines. The same aerodynamics input file can be used without modification on all implementations. The turnaround time from aerodynamics model release to a working implementation is significantly reduced

Robinson, Philip E.↗

Increased accuracy of multiphysics simulations through flexible execution, transient algorithms, and modular physics

The MOOSE framework is a foundational capability used by the NEAMS program to create over 15 different simulation tools for advanced nuclear reactors. Due to MOOSE’s broad use, improvements to the framework in support of modeling and simulation goals are critical to the program. Such improvements can take many forms, including optimization, improved user experience, streamlined application programming interfaces (APIs), parallelism, and new capabilities. The work described in this report was conducted in direct support of the simulation tools and has already been deployed. The capabilities were implemented in the same order as they are covered in this report: multiple time integrators in the same input file, initial design of framework Components, an input file Application block, extension of NetGen to 3D geometries in MOOSE, and deployment of executors in the multi-system paradigm. These five additions are fundamental capabilities that will be leveraged by many NEAMS applications.

97 MATHEMATICS AND COMPUTING↗

Comparison of ADVANTG Simulations to Simple Shielding Measurements - Paper 36

Monte Carlo (MC) radiation transport simulations, like those performed using Monte Carlo N-Particle (MCNP), can be highly accurate but require time to reduce the statistical uncertainties in the calculated detector response(s). Many different 'variance reduction' techniques devised over the years increase the efficiency of MC calculations, but these methods can be more art than science. Many of these methods are problem specific or require careful tuning of parameters for good performance. One of the best variance reduction methods, in terms of both reliable performance increases and ease of use, is the use of weight windows. Weight windows are derived from an importance map in space and energy that allows the transport code to focus more simulation time on particles that have a higher likelihood of being important to the final detector response. Less time is spent simulating particles that have little chance of making a contribution to the detector response. MCNP already includes the abilities to generate and use weight windows. Unfortunately, generating weight windows can take a very long time, perhaps longer than the original problem. Oak Ridge National Laboratory has led the development of hybrid methods using a discrete ordinates adjoint calculation to quickly develop an importance map (weight windows) for use in a Monte Carlo code. The Consistent Adjoint Driven Importance Sampling (CADIS) method uses an adjoint calculation to develop both an importance map and a biased source distribution that work together. This method is reasonably automatic, is easy to use, and has been implemented in the Automated Variance reduction Generator (ADVANTG) package that works with MCNP5. ADVANTG reads an MCNP input file and a small amount of extra user information and then runs an adjoint deterministic calculation using Denovo. The importance map and biased source distribution derived from the CADIS method can then be incorporated back into the original MCNP input file to enhance the figure-of-merit (FOM) of the calculation. The FOM is a measure of the efficiency of the calculation using the amount of run time and corresponding level of statistical uncertainty in the detector result. ADVANTG-enhanced MCNP input files have been shown to increase the FOM of many types of problems, obtaining the same level of statistical uncertainty in a shorter time compared to standard MCNP. ADVANTG can also generate variance reduction parameters (importance map and biased source) using the Forward-Weighted CADIS (FW-CADIS) method for optimizing mesh tallies. The CADIS method creates variance reduction parameters that optimize a tally's total quantity (flux, dose rate, interaction rate, etc.) and will not generally increase performance for all parts of a segmented tally. To optimize a segmented tally, the FW-CADIS method uses two discrete ordinates calculations to make variance reduction parameters that help compute a segmented tally with uniform relative uncertainties in each bin. This report will demonstrate that using ADVANTG for neutron and photon radiation shielding problems will (1) preserve the standard MCNP results and (2) obtain those results either with less statistical uncertainty or in shorter times than the standard MCNP calculation. The four demonstration problems in this report are based on simple neutron or photon transmission measurements through different materials. All of the problems here used the CADIS method and still saw improvement across the flux tallies segmented by particle energy. (authors)

61 RADIATION PROTECTION AND DOSIMETRY↗

Frequent Fulcrum Functions: The Basics of SCALE’s Graphical User Interface [Slides]

This tutorial introduces the Fulcrum graphical user interface and the basic functions that enhance the common activities of creating, editing, navigating, executing, and visualizing SCALE input files. This tutorial will help you become familiar with the Fulcrum input file text editor and the integrated input development environment features of autocompletion, automatic checking, cursor context, and input navigation. In addition, the Fulcrum and SCALE runtime environment will be reviewed to improve the understanding of job execution workflow. This tutorial does not cover data and geometry plotting. Please see the Advanced User Interface Capabilities tutorial for details regarding plotting data and geometry. No prior experience with SCALE is required. You can follow along using SCALE 6.2 or 6.3-beta.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

An approach for coupled-code multiphysics core simulations from a common input

This study describes an approach for coupled-code multiphysics reactor core simulations that is being developed by the Virtual Environment for Reactor Applications (VERA) project in the Consortium for Advanced Simulation of Light-Water Reactors (CASL). In this approach a user creates a single problem description, called the “VERAIn” common input file, to define and setup the desired coupled-code reactor core simulation. A preprocessing step accepts the VERAIn file and generates a set of fully consistent input files for the different physics codes being coupled. The problem is then solved using a single-executable coupled-code simulation tool applicable to the problem, which is built using VERA infrastructure software tools and the set of physics codes required for the problem of interest. The approach is demonstrated by performing an eigenvalue and power distribution calculation of a typical three-dimensional 17 × 17 assembly with thermal–hydraulic and fuel temperature feedback. All neutronics aspects of the problem (cross-section calculation, neutron transport, power release) are solved using the Insilico code suite and are fully coupled to a thermal–hydraulic analysis calculated by the Cobra-TF (CTF) code. The single-executable coupled-code (Insilico-CTF) simulation tool is created using several VERA tools, including LIME (Lightweight Integrating Multiphysics Environment for coupling codes), DTK (Data Transfer Kit), Trilinos, and TriBITS. Parallel calculations are performed on the Titan supercomputer at Oak Ridge National Laboratory using 1156 cores, and a synopsis of the solution results and code performance is presented. Finally, ongoing development of this approach is also briefly described.

97 MATHEMATICS AND COMPUTING↗

CanTrilBat and Cantera_apps v1.0 beta

This application can determine the performance and chemical behavior of batteries in 1D when they are cycled. With CanTrilBat, we are developing predictive phenomenological models for battery systems to predict operating performance and rate limiting steps in the performance of battery models. Particular attention is paid to primary and secondary chemistry mechanisms, such as the thermal runaway mechanisms experienced in secondary lithium ion batteries or self-discharge reaction mechanism that all batteries experience to one extent or another. The first application of this model has been for modeling the performance of thermal batteries. However, an implementation for secondary ion batteries is next. CanTrilBat applications solves transient problems involving batteries. It is a 1-D application that represents 3-D physical systems that can be reduced using the porous flow approximation for the anode, cathode, and separator. A control volume formulation is used to track conserved quantities. An operator-split approach is used to calculate the chemistry, diffusion and electronic transport that occurs within cathode and anode particles, allowing for the reduction in code complexity. All jacobian operations in CanTrilBat utilize numerical jacobians. A home grown predictor corrector scheme is used for time step control, and a home grown newton solver is used to relax the equations at each time step. Trilinos is used to solve for the resulting linear systems equation A block text input format is used to initialize options for the CanTriBat program. Within this block are the names of several XML input files, which specify the chemistry mechanism. These XML input files are read by low level Cantera routines, and serve to initialize the electrode and electrolyte chemistry mechanisms and transport properties. A GUI implementation has been contracted out to a university professor, but has not been implemented yet. It?s expected that CanTriBat will have the capability to do adaptive grid refinement in later versions. Grids will be halved based on an complicated set of heuristic criteria, based on how well the mesh captures changes to the first and second derivatives of selected solution components. Primary emphasis is given towards converged profiles for IV performance.

Moffat, HarryK.↗

CanTrilBat and Cantera_apps v1.0 beta

This application can determine the performance and chemical behavior of batteries in 1D when they are cycled. With CanTrilBat, we are developing predictive phenomenological models for battery systems to predict operating performance and rate limiting steps in the performance of battery models. Particular attention is paid to primary and secondary chemistry mechanisms, such as the thermal runaway mechanisms experienced in secondary lithium ion batteries or self-discharge reaction mechanism that all batteries experience to one extent or another. The first application of this model has been for modeling the performance of thermal batteries. However, an implementation for secondary ion batteries is next. CanTrilBat applications solves transient problems involving batteries. It is a 1-D application that represents 3-D physical systems that can be reduced using the porous flow approximation for the anode, cathode, and separator. A control volume formulation is used to track conserved quantities. An operator-split approach is used to calculate the chemistry, diffusion and electronic transport that occurs within cathode and anode particles, allowing for the reduction in code complexity. All jacobian operations in CanTrilBat utilize numerical jacobians. A home grown predictor corrector scheme is used for time step control, and a home grown newton solver is used to relax the equations at each time step. Trilinos is used to solve for the resulting linear systems equation A block text input format is used to initialize options for the CanTriBat program. Within this block are the names of several XML input files, which specify the chemistry mechanism. These XML input files are read by low level Cantera routines, and serve to initialize the electrode and electrolyte chemistry mechanisms and transport properties. A GUI implementation has been contracted out to a university professor, but has not been implemented yet. It?s expected that CanTriBat will have the capability to do adaptive grid refinement in later versions. Grids will be halved based on an complicated set of heuristic criteria, based on how well the mesh captures changes to the first and second derivatives of selected solution components. Primary emphasis is given towards converged profiles for IV performance.

Moffat, Harry K.↗

FZ2MC: A Tool for Monte Carlo Transport Code Geometry Manipulation

The process of creating and validating combinatorial geometry representations of complex systems for use in Monte Carlo transport simulations can be both time consuming and error prone. To simplify this process, a tool has been developed which employs extensions of the Form-Z commercial solid modeling tool. The resultant FZ2MC (Form-Z to Monte Carlo) tool permits users to create, modify and validate Monte Carlo geometry and material composition input data. Plugin modules that export this data to an input file, as well as parse data from existing input files, have been developed for several Monte Carlo codes. The FZ2MC tool is envisioned as a 'universal' tool for the manipulation of Monte Carlo geometry and material data. To this end, collaboration on the development of plug-in modules for additional Monte Carlo codes is desired.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Rocket-Plume Spectroscopy Simulation for Hydrocarbon-Fueled Rocket Engines

The UV-Vis spectroscopic system for plume diagnostics monitors rocket engine health by using several analytical tools developed at Stennis Space Center (SSC), including the rocket plume spectroscopy simulation code (RPSSC), to identify and quantify the alloys from the metallic elements observed in engine plumes. Because the hydrocarbon-fueled rocket engine is likely to contain C2, CO, CH, CN, and NO in addition to OH and H2O, the relevant electronic bands of these molecules in the spectral range of 300 to 850 nm in the RPSSC have been included. SSC incorporated several enhancements and modifications to the original line-by-line spectral simulation computer program implemented for plume spectral data analysis and quantification in 1994. These changes made the program applicable to the Space Shuttle Main Engine (SSME) and the Diagnostic Testbed Facility Thruster (DTFT) exhaust plume spectral data. Modifications included updating the molecular and spectral parameters for OH, adding spectral parameter input files optimized for the 10 elements of interest in the spectral range from 320 to 430 nm and linking the output to graphing and analysis packages. Additionally, the ability to handle the non-uniform wavelength interval at which the spectral computations are made was added. This allowed a precise superposition of wavelengths at which the spectral measurements have been made with the wavelengths at which the spectral computations are done by using the line-by-line (LBL) code. To account for hydrocarbon combustion products in the plume, which might interfere with detection and quantification of metallic elements in the spectral region of 300 to 850 nm, the spectroscopic code has been enhanced to include the carbon-based combustion species of C2, CO, and CH. In addition, CN and NO have spectral bands in 300 to 850 nm and, while these molecules are not direct products of hydrocarbon-oxygen combustion systems, they can show up if nitrogen or a nitrogen compound is present as an impurity in the propellants and/or these can form in the boundary layer as a result of interaction of the hot plume with the atmosphere during the ground testing of engines. Ten additional electronic band systems of these five molecules have been included into the code. A comprehensive literature search was conducted to obtain the most accurate values for the molecular and the spectral parameters, including Franck-Cordon factors and electronic transition moments for all ten band systems. For each elemental transition in the RPSSC, six spectral parameters - Doppler broadened line width at half-height, pressure-broadened line width at half-height, electronic multiplicity of the upper state, electronic term energy of the upper state, Einstein transition probability coefficient, and the atomic line center - are required. Input files have been created for ten elements of Ni, Fe, Cr, Co, Cu, Ca, Mn, Al, Ag, and Pd, which retain only relatively moderate to strong transitions in 300 to 430 nm spectral range for each element. The number of transitions in the input files is 68 for Ni; 148 for Fe; 6 for Cr; 87 for Co; 1 for Ca; 3 for Mn; 2 each for Cu, Al, and Ag; and 11 for Pd.

Tejwani, Gopal D.↗