SEARCH · Search NASA

Results for “input-output analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

107 records · Page 6

All sources NASA NTRS DOE OSTI

NASA NTRS1981

Stability of individual loudness functions obtained by magnitude estimation and production

A correlational analysis of individual magnitude estimation and production exponents at the same frequency is performed, as is an analysis of individual exponents produced in different sessions by the same procedure across frequency (250, 1000, and 3000 Hz). Taken as a whole, the results show that individual exponent differences do not decrease by counterbalancing magnitude estimation with magnitude production and that individual exponent differences remain stable over time despite changes in stimulus frequency. Further results show that although individual magnitude estimation and production exponents do not necessarily obey the .6 power law, it is possible to predict the slope of an equal-sensation function averaged for a group of listeners from individual magnitude estimation and production data. On the assumption that individual listeners with sensorineural hearing also produce stable and reliable magnitude functions, it is also shown that the slope of the loudness-recruitment function measured by magnitude estimation and production can be predicted for individuals with bilateral losses of long duration. Results obtained in normal and pathological ears thus suggest that individual listeners can produce loudness judgements that reveal, although indirectly, the input-output characteristic of the auditory system.

Hellman, R. P.↗

DOE OSTI2024

Economic Impact of Closing the Nuclear Fuel Cycle

This report estimates the economic impact of closing the United States nuclear fuel cycle. Several different fuel cycle scenarios are analyzed. These scenarios include a baseline analysis of the existing fuel cycle conditions, a hypothetical scenario where all fuel cycle operations are preformed domestically, a scenario where all reactors are replaced with sodium fast reactors, and finally a scenario that uses a mix of fast reactors and light water reactors operating on mixed oxide fuel. Each scenario modeled is assumed to be operating at equilibrium and producing electricity at a 100 GWe-yr capacity. Impacts are calculated for normal operations and do not include construction or infrastructure expansion impacts.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

NASA NTRS2015

Simulation and Analysis of Technology and Operational Procedures to Reduce the Combined Effects of Emissions and Contrails

The development and evaluation of concepts and technology to support future air traffic management systems require a hierarchy of models ranging from real-time simulations to extensive field evaluations. Air traffic simulation models such as Airspace Concept Evaluation System, Center Tracon Automation System, Future Air traffic management Concept Evaluation Tool and others are used to design air traffic systems balancing the conflicting objectives of maximizing safety, meeting future demands for airports and airspace and increase efficiency of traffic flows in the presence of uncertain weather. The impact of aviation emissions and contrails on climate imposes another constraint on the design of aircraft and aviation operations. The understanding of the complex interaction between physical climate system, the carbon and other greenhouse gas emissions and aviation activity can be improved by the development of integrated assessment models that include emission and climate models together with air traffic simulations. The modeling of aircraft emissions and their interaction with each other to change the concentration levels of different gasses in the atmosphere and the resulting impact of the radiative forcing on the equilibrium of the Earth's atmosphere is complex and requires the use of coupled atmosphere-ocean general circulation models together with three-dimensional models of carbon cycle and chemistry of other non-CO2 greenhouse gases. These models are computationally intensive and unsuitable for studies involving the generation of multiple scenarios. Simple emission and climate models, based on the input-output relations of linear systems, capture the fundamental emission to climate impact behavior by careful selection of key variables and their dynamics. The impact of various greenhouse gases depends on the total concentration, effect per unit change in atmospheric concentration and the spatial distribution of the gas. All these quantities are influenced by the lifetime of the gas. The impact of a greenhouse gas depends on the interval of assessment, which may vary from a few decades to a few centuries. Climate metrics are aimed at providing a common scale to compare different greenhouse gases. If the metrics are to be used as a tool in developing and evaluating aviation operations, they should be transparent and easy to apply. Global Warming Potential and Aggregate Global Temperature Potential are some of the commonly used metrics. This paper integrates a national-level air traffic simulation and optimization capability with simple climate models and carbon cycle models, and climate metrics to assess the impact of aviation on climate. The capability brings together metrics, which are useful in aviation operations together with metrics used in climate studies. The capability can be used to make trade-offs between extra fuel cost and reduction in climate impact. There is considerable uncertainty in our understanding of the radiative forcing associated with emissions and contrails. The parameters in the simulation can be used to evaluate the effect of various uncertainties in emission models and contrails. It can also be used to evaluate the impact of different decision horizons. Alternatively, the optimization results from the simulation can be used as inputs to other tools that monetize global climate impacts like the FAA's Aviation Environmental Portfolio Management Tool for Impacts.

impact of aviation on the environment↗

DOE OSTI2022

Recurrent neural networks for short-term and long-term prediction of geothermal reservoirs

Accurate prediction of geothermal reservoir responses to alternative energy production scenarios is critical for optimizing the development of the underlying resources. While the conventional physics-based models offer a comprehensive prediction tool, data-driven models provide an efficient alternative to build fit-for-purpose predictive models by extracting and using the statistical patterns in the collected data to make predictions. The recurrent neural network (RNN) is a data-driven model that is commonly applied to predict time series sequences. This paper presents a variant of RNN that also utilizes the efficiency of convolutional neural networks (CNN) for the prediction of energy production from geothermal reservoirs. Specifically, a CNN–RNN architecture is developed that takes historical well controls as input (features) and their corresponding production response data as output (labels) to learn an input-output mapping that can predict the future well production responses/performance for any given future well control inputs. The model is paired with a labeling scheme to handle real field disturbances that create data gaps. In addition to the model structure, we introduce a thorough workflow for applying the model, which includes data pre-processing, feature selection, as well as different training strategies for short-term and long-term prediction. Finally, the performance and accuracy of the model are evaluated by applying it to multiple datasets, including a field reservoir model.

15 GEOTHERMAL ENERGY↗

DOE OSTI2022

USEEIO v2.0, The US Environmentally-Extended Input-Output Model v2.0

USEEIO v2.0 is an environmental-economic model of US goods and services that can be used for life cycle assessment, footprinting, national prioritization, and related applications. This paper describes the development of the model and accompanies the release of a full model dataset as well as various supporting datasets of national environmental totals by US industry. Novel methodological elements since USEEIO v1 models include waste sector disaggregation, final demand vectors for US consumption and production, a domestic form of the model that can be used to separate domestic and foreign impacts, and price adjustment matrices for converting outputs to purchaser price and in various US dollar years. Improvements in modeling national totals of industry and environmental flows are described. The model is validated through reproduction of national totals from input data sources and through analysis of changes from the most recent complete USEEIO model that can be explained based on data updates or method changes. The model datasets can all be reproduced with open source software packages.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2020

Socioeconomic Effects of Pension Spending: Evidence from Spain

The purpose of this study is to provide broader understanding of the significant role that the pension system has in the Spanish economy by estimating the sectoral production, employment and income sustained by pensioners' consumption. Based on input-output tables by the World Input-Output Database and consumption data from the Household Budget Survey by the Spanish Statistical Office, a demoeconomic model is applied to quantify the direct impacts, indirect impacts from interindustry links and induced impacts from income-consumption connections over a nine-year period (2006–2014). Then, the factors driving the evolution of total output, employment and value added during such period have been examined by using structural decomposition analysis. The growing participation of consumption by pensioner households in final demand had proven crucial during the 2008 crisis to alleviate the negative trend in production and employment derived from the collapse in consumption suffered by the rest of households. Determining the underlying factors driving changes in both employment and income during the 2008 crisis can be of interest in political decision-making on the sustainability of the Spanish pension system. The results of estimating both the employment and income supported by pensioners' consumption reveal the significant stabilizing effect of the public spending on pensions, particularly during the 2008 crisis. The current Spanish approach of attaining the pension system sustainability by merely reducing social protection costs ignores the adverse consequences of a lower pensioners' demand. This paper addresses an alternative view in which pension spending is not considered a burden on economic growth but rather a means of improving the level of production and employment.

employment↗

DOE OSTI2021

Learning the solution operator of parametric partial differential equations with physics-informed DeepONets

Partial differential equations (PDEs) play a central role in the mathematical analysis and modeling of complex dynamic processes across all corners of science and engineering. Their solution often requires laborious analytical or computational tools, associated with a cost that is markedly amplified when different scenarios need to be investigated, for example, corresponding to different initial or boundary conditions, different inputs, etc. In this work, we introduce physics-informed DeepONets, a deep learning framework for learning the solution operator of arbitrary PDEs, even in the absence of any paired input-output training data. We illustrate the effectiveness of the proposed framework in rapidly predicting the solution of various types of parametric PDEs up to three orders of magnitude faster compared to conventional PDE solvers, setting a previously unexplored paradigm for modeling and simulation of nonlinear and nonequilibrium processes in science and engineering.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2025

Conditional Pseudo-Reversible Normalizing Flow for Surrogate Modeling in Quantifying Uncertainty Propagation

We introduce a conditional pseudo-reversible normalizing flow (PR-NF) that directly learns conditional probability distributions from noisy physical models to efficiently quantify both forward and inverse uncertainty propagation. Traditional surrogate modeling approaches approximate only the deterministic component of physical models, requiring separate noise characterization and computationally expensive sampling methods for inverse problems. Here, in this work, we develop the conditional PR-NF model to directly learn and efficiently generate samples from the conditional probability density functions (PDFs). The training process utilizes dataset consisting of input-output pairs without requiring prior knowledge about the noise and the function. Once trained, our model efficiently generates samples from conditional PDFs for any input within the training domain. Moreover, the pseudo-reversibility feature allows for the use of fully connected neural network architectures, which simplifies the implementation and enables theoretical analysis. We provide a rigorous convergence analysis of the conditional PR-NF model, showing its ability to converge to the target conditional PDF using the Kullback−Leibler divergence. To demonstrate the effectiveness of our method, we apply it to several benchmark tests and a real-world geologic carbon storage problem.

97 MATHEMATICS AND COMPUTING↗

NASA NTRS1971

Dynamic testing of a single-degree-of-freedom strapdown gyroscope

Test methods and results are presented for the equivalent average input rate of a single-degree-of-freedom gyroscope operated both open loop and with a ternary-logic pulse-torque-to-balance loop during multiaxis angular oscillation. For the open-loop tests, good agreement was obtained with theoretical results. Two-axis testing was performed for oscillations about the Input-Output axes, the Input-Spin axes, and the Spin-Output axes. These tests run in the torque-to-balance mode revealed significant departures from open-loop results in the induced drift rate. An analysis is developed explaining much of the closed-loop data presented. Test data for the gryoscope in a ternary torque-to-balance loop with constant input rates is presented. The tests demonstrate that the instrument rate linearity does not change with interrogation frequency from 3,600 to 14,400 Hz if the torque coil is tuned to offer a resistive load to the current switch. Analysis cited shows that gyroscope lag compensation eliminates multiple pulsing and other equivalent forms of degraded resolution in a wide variety of quantizing loops. This result is test verified for the ternary delta-modulator loop.

Lory, C. B.↗

NASA NTRS1972

The effects of attention sharing in a dynamic dual task environment

There are numerous examples of cases where the human operator is confronted with several tasks occurring simultaneously and continuously in time. The current study is an investigation into the nature of attention sharing between two continuous tasks with independent input-output modes. Eleven subjects were tested using a zero order compensatory control task with three levels of difficulty (input bandwidth) for each subject. As a secondary task on half of the trials, the subjects were also required to verbally shadow a random auditory input. Results from an extensive time and frequency domain analysis of the data are presented and discussed. The evidence supports a single channel model for continuous dual-task control.

Cliff, R. C.↗

NASA NTRS1991

A controls engineering approach for analyzing airplane input-output characteristics

An engineering approach for analyzing airplane control and output characteristics is presented. State-space matrix equations describing the linear perturbation dynamics are transformed from physical coordinates into scaled coordinates. The scaling is accomplished by applying various transformations to the system to employ prior engineering knowledge of the airplane physics. Two different analysis techniques are then explained. Modal analysis techniques calculate the influence of each system input on each fundamental mode of motion and the distribution of each mode among the system outputs. The optimal steady state response technique computes the blending of steady state control inputs that optimize the steady state response of selected system outputs. Analysis of an example airplane model is presented to demonstrate the described engineering approach.

Arbuckle, P. Douglas↗

NASA NTRS1994

Higher harmonic control analysis for vibration reduction of helicopter rotor systems

An advanced higher harmonic control (HHC) analysis has been developed and applied to investigate its effect on vibration reduction levels, blade and control system fatigue loads, rotor performance, and power requirements of servo-actuators. The analysis is based on a finite element method in space and time. A nonlinear time domain unsteady aerodynamic model, based on the indicial response formulation, is used to calculate the airloads. The rotor induced inflow is computed using a free wake model. The vehicle trim controls and blade steady responses are solved as one coupled solution using a modified Newton method. A linear frequency-domain quasi-steady transfer matrix is used to relate the harmonics of the vibratory hub loads to the harmonics of the HHC inputs. Optimal HHC is calculated from the minimization of the vibratory hub loads expressed in term of a quadratic performance index. Predicted vibratory hub shears are correlated with wind tunnel data. The fixed-gain HHC controller suppresses completely the vibratory hub shears for most of steady or quasi-steady flight conditions. HHC actuator amplitudes and power increase significantly at high forward speeds (above 100 knots). Due to the applied HHC, the blade torsional stresses and control loads are increased substantially. For flight conditions where the blades are stalled considerably, the HHC input-output model is quite nonlinear. For such cases, the adaptive-gain controller is effective in suppressing vibratory hub loads, even though HHC may actually increase stall areas on the rotor disk. The fixed-gain controller performs poorly for such flight conditions. Comparison study of different rotor systems indicates that a soft-inplane hingeless rotor requires less actuator power at high speeds (above 130 knots) than an articulated rotor, and a stiff-inplane hingeless rotor generally requires more actuator power than an articulated or a soft-inplane hingeless rotor. Parametric studies for a hingeless rotor operating in a transition flight regime and for an articulated rotor operating at the level-flight boundary (high speed and high thrust conditions) indicate that blade parameters including flap, lag, torsion stiffness distributions, linear pretwist, chordwise offset of center-of-mass from elastic axis and chordwise offset of elastic axis from aerodynamic center can be selected to minimize the actuator power requirements for HHC.

Nguyen, Khanh Q.↗

NASA NTRS1997

Shape Optimization by Bayesian-Validated Computer-Simulation Surrogates

A nonparametric-validated, surrogate approach to optimization has been applied to the computational optimization of eddy-promoter heat exchangers and to the experimental optimization of a multielement airfoil. In addition to the baseline surrogate framework, a surrogate-Pareto framework has been applied to the two-criteria, eddy-promoter design problem. The Pareto analysis improves the predictability of the surrogate results, preserves generality, and provides a means to rapidly determine design trade-offs. Significant contributions have been made in the geometric description used for the eddy-promoter inclusions as well as to the surrogate framework itself. A level-set based, geometric description has been developed to define the shape of the eddy-promoter inclusions. The level-set technique allows for topology changes (from single-body,eddy-promoter configurations to two-body configurations) without requiring any additional logic. The continuity of the output responses for input variations that cross the boundary between topologies has been demonstrated. Input-output continuity is required for the straightforward application of surrogate techniques in which simplified, interpolative models are fitted through a construction set of data. The surrogate framework developed previously has been extended in a number of ways. First, the formulation for a general, two-output, two-performance metric problem is presented. Surrogates are constructed and validated for the outputs. The performance metrics can be functions of both outputs, as well as explicitly of the inputs, and serve to characterize the design preferences. By segregating the outputs and the performance metrics, an additional level of flexibility is provided to the designer. The validated outputs can be used in future design studies and the error estimates provided by the output validation step still apply, and require no additional appeals to the expensive analysis. Second, a candidate-based a posteriori error analysis capability has been developed which provides probabilistic error estimates on the true performance for a design randomly selected near the surrogate-predicted optimal design.

Patera, Anthony T.↗

NASA NTRS1999

Development of An Intelligent Flight Propulsion Control System

The initial design and demonstration of an Intelligent Flight Propulsion and Control System (IFPCS) is documented. The design is based on the implementation of a nonlinear adaptive flight control architecture. This initial design of the IFPCS enhances flight safety by using propulsion sources to provide redundancy in flight control. The IFPCS enhances the conventional gain scheduled approach in significant ways: (1) The IFPCS provides a back up flight control system that results in consistent responses over a wide range of unanticipated failures. (2) The IFPCS is applicable to a variety of aircraft models without redesign and,(3) significantly reduces the laborious research and design necessary in a gain scheduled approach. The control augmentation is detailed within an approximate Input-Output Linearization setting. The availability of propulsion only provides two control inputs, symmetric and differential thrust. Earlier Propulsion Control Augmentation (PCA) work performed by NASA provided for a trajectory controller with pilot command input of glidepath and heading. This work is aimed at demonstrating the flexibility of the IFPCS in providing consistency in flying qualities under a variety of failure scenarios. This report documents the initial design phase where propulsion only is used. Results confirm that the engine dynamics and associated hard nonlineaaities result in poor handling qualities at best. However, as demonstrated in simulation, the IFPCS is capable of results similar to the gain scheduled designs of the NASA PCA work. The IFPCS design uses crude estimates of aircraft behaviour. The adaptive control architecture demonstrates robust stability and provides robust performance. In this work, robust stability means that all states, errors, and adaptive parameters remain bounded under a wide class of uncertainties and input and output disturbances. Robust performance is measured in the quality of the tracking. The results demonstrate the flexibility of the IFPCS architecture and the ability to provide robust performance under a broad range of uncertainty. Robust stability is proved using Lyapunov like analysis. Future development of the IFPCS will include integration of conventional control surfaces with the use of propulsion augmentation, and utilization of available lift and drag devices, to demonstrate adaptive control capability under a greater variety of failure scenarios. Further work will specifically address the effects of actuator saturation.

Calise, A. J.↗

NASA NTRS2016

Control Systems with Normalized and Covariance Adaptation by Optimal Control Modification

Disclosed is a novel adaptive control method and system called optimal control modification with normalization and covariance adjustment. The invention addresses specifically to current challenges with adaptive control in these areas: 1) persistent excitation, 2) complex nonlinear input-output mapping, 3) large inputs and persistent learning, and 4) the lack of stability analysis tools for certification. The invention has been subject to many simulations and flight testing. The results substantiate the effectiveness of the invention and demonstrate the technical feasibility for use in modern aircraft flight control systems.

Nguyen, Nhan T.↗

NASA NTRSDate not supplied

Developing and Testing a Physics Guided Machine Learning NeuralNetwork to Predict Tonal Noise Emitted by a Propeller

Artificial neural networks offer a highly nonlinear and adaptive model for predicting complex interactions between input-output parameters. However, these networks require large datasets which often exceed practical considerations in modeling experimental results. To alleviate the dataset size requirement, a method known as physics guided machine learning has been applied to construct several neural networks for predicting propeller tonal noise in the time domain over a broad range of flight conditions. Three space-filling designs, namely, Latin-Hypercube, Sphere-Packing, and Grid-Space, were used to distribute points throughout the input parameter space encompassing nondimensional flight conditions and observer geometry. Each neural network’s performance was validated by conditions outside of the training set and compared to the Propeller Analysis System tool from the NASA Aircraft Noise Prediction Program. Compared to the Grid-Space input design, the Latin-Hypercube and the Sphere-Packing designs provided a better representation of the domain for training. Regarding the network archetype, a fully connected perceptron was found to outperform the partially connected perceptron in their ability to predict tonal noise for small datasets. The black-box nature of these neural networks was also explored to understand how the networks constructed the waveform and understand why some network designs produce better models.

Propeller noise↗

DOE OSTI2022

4.2.1.31 Integrated Life Cycle Sustainability Analysis

This project provides the Department of Energy's Bioenergy Technologies Office (BETO) with strategic decision-support for the evaluation of its R&D portfolio by developing, validating, and applying a coherent methodology and consistent model framework to quantify the net effects of an expanding US bioeconomy. The framework fills an analysis gap previously identified by Peer Review and supports a related milestone in BETO's Multi-Year Program Plan. The framework was scoped with inputs from practitioners in academia, national laboratories, and federal agencies. The model is a top-down, economy-wide framework using a coherent methodology to compute environmental and socio-economic metrics. It is purposefully complementary to existing bottom-up, process-based techno-economic and life cycle assessment BETO tools and uses their data as inputs. Presently, the model covers several commercial and near-commercial biofuel routes and an emerging pathway for plastics upcycling. It covers temporal detail across four time-steps and is currently being expanded with a prospective modeling capability. The model has provided analyses for the Third Triennial Report to Congress (RtC3) on the environmental impacts of the Renewable Fuel Standard (RFS2), among others. As part of this project, NREL also provides scientific support to BETO in the International Energy Agency's Technology Collaboration Program on Bioenergy (IEA Bioenergy) Task 45 on Sustainability. Here, NREL evaluates and synthesizes activities that develop, compare, or apply metrics, methods, and tools to quantify sustainability effects of bioeconomy products. NREL also coordinates related national lab involvement and a BETO Working Group on Sustainable Land Management.

bioeconomy↗