Electron scattering and bremsstrahlung cross- section measurements
Electron transmission measurements for aluminum and gold, and backscattering measurements on targets of iron, tin, aluminum, and gold
ELECTRON INTERACTION↗
SEARCH · Search NASA
Results for “interactions iron”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Properties of the solar nebula and the origin of the moon.
The basic geochemical model of the structure of the moon proposed by Anderson, in which the moon is formed by differentiation of the calcium, aluminium, and titanium-rich inclusions in the Allende meteorite, is accepted, and the conditions for formation of this moon within the solar nebula models of Cameron and Pine are discussed. The basic material condenses while iron remains in the gaseous phase, which places the formation of the moon slightly inside the orbit of Mercury. Some condensed metallic iron is likely to enter the moon in this position, and since the moon is assembled at a very high temperature, it is likely to have been fully molten, so that the iron can remove the iridium from the silicate material and carry it down to form a small core. Interactions between the moon and Mercury lead to the present rather eccentric Mercury orbit and to a much more eccentric orbit for the moon, reaching past the orbit of the earth, establishing conditions which are necessary for capture of the moon by the earth.
Cameron, A. G. W.↗
A circumterrestrial compositional filter
A major question about the Moon is its under abundance of iron. The proposal of whether a metal-silicate fractionation of heliocentric bodies could be achieved through collisional interactions with a circumterrestrial swarm is examined. The whole scenario works only if there is a way to maintain the hypothesized circumterrestrial swarm, which otherwise would collisionally diffuse on a time scale of 100 yr (much of it collapsing on the Earth); the source of angular momentum to maintain the swarm remains a mystery.
Chapman, C. R.↗
A method for calculating proton-nucleus elastic cross-sections
Recently [Nucl. Instr. and Meth. B 145 (1998) 277; Extraction of in-medium nucleon-nucleon amplitude from experiment, NASA-TP, 1998], we developed a method of extracting nucleon-nucleon (N-N) cross-sections in the medium directly from experiment. The in-medium N-N cross-sections form the basic ingredients of several heavy-ion scattering approaches including the coupled-channel approach developed at the NASA Langley Research Center. We investigated [Proton-nucleus total cross-sections in coupled-channel approach, NASA/TP, 2000; Nucl. Instr. and Meth. B 173-174 (2001) 391] the ratio of real to imaginary part of the two body scattering amplitude in the medium. These ratios are used in combination with the in-medium N-N cross-sections to calculate proton-nucleus elastic cross-sections. The agreement is excellent with the available experimental data. These cross-sections are needed for the radiation risk assessment of space missions. c2002 Elsevier Science B.V. All rights reserved.
NASA Center LaRC↗
Dependence of the multiplicities of secondary particles on the impact parameter in collisions of high-energy neon and iron nuclei with photoemulsion nuclei
A method is proposed for finding the dependence of mean multiplicities of secondaries on the nucleus-collision impact parameter from the data on the total interaction ensemble. The impact parameter has been shown to completely define the mean characteristics of an individual interaction event. A difference has been found between experimental results and the data calculated in terms of the cascade-evaporation model at impact-parameter values below 3 fm.
Non-NASA Center↗
The Response of the North Atlantic Bloom to NAO Forcing
Results from the climatologically forced coupled ice/ocean/biogeochemical model that covers the Arctic and North Atlantic Oceans are presented and compared to the chlorophyll fields of satellite-derived ocean color measurements. Biogeochemical processes in the model are determined from the interactions among four phytoplankton functional groups (diatoms, chlorophytes, cyanobacteria and coccolithophores) and four nutrients (nitrate, ammonium, silicate and dissolved iron). The model simulates the general large-scale pattern in April, May and June, when compared to both satellite-derived and in situ observations. The subpolar North Atlantic was cool in the 1980s and warm in the latter 1990s, corresponding to the CZCS and SeaWiFS satellite observing periods, respectively. The oceanographic conditions during these periods resemble the typical subpolar upper ocean response to the NAO+ and NAO-phases, respectively. Thus, we use the atmospheric forcing composites from the two NAO phases to simulate the variability of the mid-ocean bloom during the satellite observing periods. The model results show that when the subpolar North Atlantic is cool, the NAO+ case, more nutrients are available in early spring than when the North Atlantic is warm, the NAO-case. However, the NAO+ simulation produces a later bloom than the NAO-simulation. This difference in the bloom times is also identified in SeaWiFS and CZCS satellite measurements. In the model results, we can trace the difference to the early diatom bloom due to a warmer upper ocean. The higher nutrient abundance in the NAO+ case did not provide larger total production than in the NAO- case, instead the two cases had a comparable area averaged amplitude. This leads us to conclude that in the subpolar North Atlantic, the timing of the spring phytoplankton bloom depends on surface temperature and the magnitude of the bloom is not significantly impacted by the nutrient abundance.
Mizoguchi, Ken-Ichi↗
Project Report: Undergraduate Student Research Program (USRP)
To better understand geochemical processes occurring on Europa's seafloor, we investigated the effects of varying Fe?content in the seafloor rock and varying temperature. Iron is important in such geochemical processes as the production of methane through serpentinization (e.g. Allen and Seyfried, 2003) and can be a nutrient for microbes (Russell and Hall, 2006; Park and Kim, 2001). It can also offer clues as to the state of differentiation of Europa's core/mantle. If Europa is fully differentiated and contains an iron core, we would expect there to be little iron in the mantle and ocean floor whereas a homogeneous Europa would have iron evenly dispersed throughout the ocean floor. Furthermore, the composition of the ocean is a result of water?rock interactions at the seafloor. This project investigated the effects of temperature on geochemical processes, comparing high temperature (> 250oC) hydrothermal vents (Kelley et al., 2001) to lower temperature (~20oC) cold seeps (e.g. Orphan et al., 2002).
Europa↗
Photoionization Models for High Density Gas
Relativistically broadened and redshifted 6.4 – 6.9 keV iron K lines are observed from many accretion powered objects, including X-ray binaries and active galactic nuclei(AGN). Existence of gas close to the central engine implies large radiation intensities and correspondingly large gas densities if the gas is to remain partially ionized. Simple estimates indicate that high gas densities are needed to allow survival of iron against ionization. These are high enough that rates for many atomic processes are affected by mechanisms related to interactions with nearby ions and electrons. Radiation intensities are high enough that stimulated processes can be important. Most models currently in use for interpreting relativistic lines use atomic rate coefficients designed for use at low densities and neglect stimulated processes. In our work so far we have presented atomic structure calculations with the goal of providing physically appropriate models at densities consistent with line-emitting gas near compact objects. In this paper we apply these rates to photoionization calculations, and produce ionization balance curves and X-ray emissivities and opacities which are appropriate for high densities and high radiation intensities. The final step in our program will be presented in a subsequent paper: Model atmosphere calculations which incorporate these rates into synthetic spectra.
T Kallman↗
Charge Resolution of the Silicon Matrix of the ATIC Experiment
ATIC (Advanced Thin Ionization Calorimeter) is a balloon borne experiment designed to measure the cosmic ray composition for elements from hydrogen to iron and their energy spectra from approx.50 GeV to near 100 TeV. It consists of a Si-matrix detector to determine the charge of a CRT particle, a scintillator hodoscope for tracking, carbon interaction targets and a fully active BGO calorimeter. ATIC had its first flight from McMurdo, Antarctica from 28/12/2000 to 13/01/2001. The ATIC flight collected approximately 25 million events. The silicon matrix of the ATIC spectrometer is designed to resolve individual elements from proton to iron. To provide this resolution careful calibration of each pixel of the silicon matrix is required. Firstly, for each electronic channel of the matrix the pedestal value was subtracted taking into account its drift during the flight. The muon calibration made before the flight was used then to convert electric signals (in ADC channel number) to energy deposits in each pixel. However, the preflight muon calibration was not accurate enough for the purpose, because of lack of statistics in each pixel. To improve charge resolution the correction was done for the position of Helium peak in each pixel during the flight . The other way to set electric signals in electronics channels of the Si-matrix to one scale was correction for electric channel gains accurately measured in laboratory. In these measurements it was found that small different nonlinearities for different channels are present in the region of charge Z > 20. The correction for these non-linearities was not done yet. In linear approximation the method provides practically the same resolution as muon calibration plus He-peak correction. For searching a pixel with the signal of primary particle an indication from the cascade in the calorimeter was used. For this purpose a trajectory was reconstructed using weight centers of energy deposits in BGO layers. The point of intersection of this trajectory with Si-matrix and its RMS was determined. The pixel with maximal signal in 3sigma region was taken as sought. The signal in this pixel was corrected by trajectory zenith angle. The preliminary results on charge resolution of the Si-matrix in the range from protons to iron are presented.
Zatsepin, V. I.↗
Recent spectroscopic findings concerning clay/water interactions at low humidity: Possible applications to models of Martian surface reactivity
A feasibility study assessing the utility of the adaptation of near infrared correlation spectroscopy to quantifying iron and adsorbed water in some clay-based Mars soil analog materials (MarSAM's). The work was intended to constitute Phase 1 of an approach to identifying optical analytical wavelength regions, not only for important mineral classes, but for chemically active centers within them. Many of these centers are common to unrelated mineral classes and of disproportionate influence relative to the mineral structure as a whole in determining the surface reactivity of mineral surfaces. We previously reported linearity between reflectance and total iron and total moisture over a large range of both key variables. We also discovered interesting relationships between the intensity of iron bands and the relative humidity of the systems. These relationships were confirmed. We also show that, in the low humidity range, reflectance is linearly dependent on a different kind of water from that best representing the full humidity range (the kind of water associated, in clays, with surface acidity). These relationships and the sensitivity and capability of quantitation of near infrared data indicate high promise with the production of reactive surface intermediates of products of surface reactions.
Coyne, L.↗
Magnetism and the interior of the moon
The application of lunar magnetic field measurements to the study of properties of the lunar crust and deep interior is reviewed. Following a brief description of lunar magnetometers and the lunar magnetic environment, measurements of lunar remanent fields and their interaction with the solar plasma are discussed. The magnetization induction mode is considered with reference to lunar magnetic permeability and iron abundance calculations. Finally, electrical conductivity and temperature calculations from analyses of poloidal induction, for data taken in both the solar wind and in the geomagnetic tail, are reviewed.
Dyal, P.↗
Deposition and Characterization of Thin Films on Metallic Substrates
A CVD method was successfully developed to produce conversion coatings on aluminum alloys surfaces with reproducible results with a variety of precursors. A well defined protocol to prepare the precursor solutions formulated in a previous research was extended to other additives. It was demonstrated that solutions prepared following such a protocol could be used to systematically generate protective coatings onto aluminum surfaces. Experiments with a variety of formulations revealed that a refined deposition protocol yields reproducible conversion coatings of controlled composition. A preliminary correlation between solution formulations and successful precursors was derived. Coatings were tested for adhesion properties enhancement for commercial paints. A standard testing method was followed and clear trends were identified. Only one precursors was tested systematically. Anticipated work on other precursors should allow a better characterization of the effect of intermetallics on the production of conversion/protective coatings on metals and ceramics. The significance of this work was the practical demonstration that chemical vapor deposition (CVD) techniques can be used to systematically generate protective/conversion coating on non-ferrous surfaces. In order to become an effective approach to replace chromate-based pre- treatment processes, namely in the aerospace or automobile industry, the process parameters must be defined more precisely. Moreover, the feasibility of scale-up designs necessitates a more comprehensive characterization of the fluid flow, transport phenomena, and chemical kinetics interacting in the process. Kinetic characterization showed a significantly different effect of magnesium-based precursors when compared to iron-based precursors. Future work will concentrate on refining the process through computer simulations and further experimental studies on the effect of other transition metals to induce deposition of conversion/protective films on aluminum and other metallic substrates.
Gatica, Jorge E.↗
Io's surface and environs - A magmatic-volatile model
A model is proposed to account for the observed properties of Io. The crust is probably siliceous, but the outermost visible surface is composed primarily of several allotropes of elemental sulfur, plus frosts of SO2, H2S, and S2O. The 4-micron feature in Io's IR reflectance is identified as the (nu 1 + nu 3) band of SO2 frost. A possible source of the S is dissociation of iron sulfide brought up from the core by mantle convection. The SO2 is produced in the volcanoes, and the H2S by interaction of magnetospheric protons with the surface S. Delayed luminescence from S2O could cause the posteclipse brightening. The orbital torus is sustained by evaporation from molten ejecta from the volcanoes. Several additional diagnostic absorption bands and two additional minor torus species are predicted by this model.
Hapke, B.↗
Coupling of Dust Mineralogy to Radiation in NASA GISS ModelE: Impact Upon Dust Optical Properties and Direct Radiative Effect
Estimates of dust direct radiative effect (DRE) are still largely uncertain mainly due to the poor constraining of regional variations of dust absorption, whose known connection with mineral composition is still largely neglected by most Earth System Models. The inaccurate knowledge of soil mineralogy and insufficient measurements of dust physical and optical properties still present the main challenges for a proper representation of the dust-radiation interaction in climate models. We recently upgraded the coupling of dust minerals to shortwave radiation in the NASA GISS ModelE. In particular, we extended the interaction to online-calculated minerals and implemented two different mixing configurations: i) external mixing of three main mineral components and ii) internal mixing of all minerals, allowing a dynamic fraction of iron oxides. We used a semi-empirical approach for the optical calculations, mostly based on aerosol chamber measurements from natural soils, aiming to reduce the influence of uncertain assumptions on the optical properties and mixing state of individual minerals. In this contribution, we present the results of our first calculations of dust optical properties and DREs based on different mixing configurations of interactive minerals. We show the changes to dust optical depth and single scattering albedo, with respect to the control case using homogeneous dust composition, and the consequent global and regional variations in dust DREs at the top of atmosphere and at surface. We also compare the model optical properties with AERONET data, filtered to identify dust scenes. We find that accounting for the diverse properties of dust minerals modifies the pattern of regional dust absorption and therefore its impact upon climate. We also show that the mineralogy effect is sensitive to the assumed mixing state of minerals.
dust direct radiative effect↗
Dependence of the multiplicities of secondary particles on the impact parameter in collisions of high-energy neon and iron nuclei with photoemulsion nuclei
A method is proposed for finding the dependence of mean multiplicities of secondaries on the nucleus-collision impact parameter from the data on the total interaction ensemble. The impact parameter has been shown to completely define the mean characteristics of an individual interaction event. A difference has been found between experimental results and the data calculated in terms of the cascade-evaporation model at impact-parameter values below 3 fm.
Dudkin, V. E.↗
The heavy particle hazard, what physical data are needed?
The physical data required to evaluate the radiation hazard from heavy galactic cosmic rays to astronauts on extended missions are discussed. The spectral characteristics, nuclear interaction parameters, and track structure of particles are emphasized. The data on the lower energy portion of the differential spectrum of the iron group and nuclear fragmentation in tissue and aluminum are tested, and results are shown.
Curtis, S. B.↗
Meteor research program
An overview of research on radio and radar meteors accomplished during the past decade is presented, and the work of the past year is highlighted. Velocity distribution and mass flux data are obtained for meteors in the range 10 to 0.0001 g, the size believed to be the principal hazard to space missions. The physical characteristics of mass, structure and density, luminosity, and ablation are briefly described, and the formulation of a theory for interactions of ionization and excitation during collision of atomic particles is mentioned. Five classes of meteoroids are identified, including the two of iron and stone meteorites. Stream meteors associated with known comets are Classes A or C, and parent comets of Class B streams are not observed. Class A meteoroids are identified with the core of a cometary nucleus, Class C with less dense surface of the nucleus after sublimation of ices, and Class B with less dense cores of smaller cometary nuclei. Atmospheric meteor phenomena associated with winds and gravity waves, density and temperature, atomic oxygen, and meteor rate changes are mentioned.
Southworth, R. B.↗
Satellite-sized planetesimals and lunar origin
Exploratory calculations using accretionary theory are made to demonstrate plausible sizes of second-largest, third-largest, etc., bodies at the close of planet formation in heliocentric orbits near the planets, assuming asteroid-like size distributions at the start of the calculation. Many satellite-sized bodies are found to be available for capture, cratering, or collisional fragmentation. In the case of earth-sized planets, the models suggest second-largest bodies of 500 to 3000 km radius, and tens of bodies larger than 100 km radius. Many of these interact with the planet before suffering any fragmentation events with each other. Collision of a large body with earth could eject iron-deficient crust and upper mantle material, forming a cloud of refractory, volatile-poor dust that could form the moon. Other satellite systems may have been affected by major capture or collision events of chance character.
Hartmann, W. K.↗