Search NASA⌕ Search

SEARCH · Search NASA

Results for “interactive”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

First Evidence of Solar Neutrino Interactions on 13 C

The SNO+ Collaboration reports the first evidence of 8 B solar neutrinos interacting on 13 C nuclei. The charged current interaction proceeds through 13 C +𝜈 𝑒 → 13 N+𝑒 − which is followed, with a 10 minute half life, by 13 N → 13 C +𝑒 + +𝜈 𝑒 . The detection strategy is based on the delayed coincidence between the electron and the positron. Evidence for the charged current signal is presented with a significance of 4.2⁢𝜎. Using the natural abundance of 13 C present in the scintillator, 5.7 metric tons of 13 C over 231 days of data were used in this analysis. The 5.6$^{+3.0}_{−2.3}$ observed events in the data set are consistent with the expectation of 4.7$^{+0.6}_{−1.3}$ events. This result is the second real-time measurement of CC interactions of 8 B neutrinos with nuclei and constitutes the lowest energy observation of neutrino interactions on 13 C generally. This enables the first direct measurement of the CC 𝜈 𝑒 reaction to the ground state of 13 N , yielding an average cross section of (16.1$^{+8.5}_{−6.7}$⁢(stat.)$^{+1.6}_{−2.7}$⁢(syst.))×10 −43 cm 2 over the relevant 8 B solar neutrino energies.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Supernova electron-neutrino interactions with xenon in the nEXO detector

Electron-neutrino charged-current interactions with xenon nuclei were modeled in the nEXO neutrinoless double-𝛽 decay detector (∼5 metric ton, 90% 136 Xe, 10% 134 Xe) to evaluate its sensitivity to supernova neutrinos. Predictions for event rates and detectable signatures were modeled using the Model of Argon Reaction Low Energy Yields (MARLEY) event generator. We find good agreement between MARLEY’s predictions and existing theoretical calculations of the inclusive cross sections at supernova neutrino energies. The interactions modeled by MARLEY were simulated within the nEXO simulation framework and were run through an example reconstruction algorithm to determine the detector’s efficiency for reconstructing these events. The simulated data, incorporating the detector response, were used to study the ability of nEXO to reconstruct the incident electron-neutrino spectrum and these results were extended to a larger xenon detector of the same isotope enrichment. We estimate that nEXO will be able to observe electron-neutrino interactions with xenon from supernovae as far as 5–8 kpc from Earth, while the ability to reconstruct incident electron-neutrino spectrum parameters from observed interactions in nEXO is limited to closer supernovae.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Perspective on Lewis Acid‐Base Interactions in Emerging Batteries

Lewis acid-base interactions are common in chemical processes presented in diverse applications, such as synthesis, catalysis, batteries, semiconductors, and solar cells. The Lewis acid-base interactions allow precise tuning of material properties from the molecular level to more aggregated and organized structures. This review will focus on the origin, development, and prospects of applying Lewis acid-base interactions for the materials design and mechanism understanding in the advancement of battery materials and chemistries. The covered topics relate to aqueous batteries, lithium-ion batteries, solid-state batteries, alkali metal-sulfur batteries, and alkali metal-oxygen batteries. In this review, the Lewis acid-base theories will be first introduced. Thereafter the application strategies for Lewis acid-base interactions in solid-state and liquid-based batteries will be introduced from the aspects of liquid electrolyte, solid polymer electrolyte, metal anodes, and high-capacity cathodes. The underlying mechanism is highlighted in regard to ion transport, electrochemical stability, mechanical property, reaction kinetics, dendrite growth, corrosion, and so on. Last but not least, perspectives on the future directions related to Lewis acid-base interactions for next-generation batteries are like to be shared.

Lewis acid-base interactions↗

Independent and interactive effects of wet bulb globe temperature and air pollution exposures on suicide mortality

Background: Individual components of the ambient environment, such as temperature and air pollution, exist as part of a complex mixture and have been associated with suicide; however, their interactive effects remain poorly understood. This study examined the independent and interactive effects of wet bulb globe temperature (WBGT), nitrogen dioxide (NO 2 ), and fine particulate matter (PM 2.5 ) on suicide mortality. Methods: We identified 7,551 suicide cases in Utah, USA, from 2000 to 2016 and assigned exposure to daily maximum WBGT (sourced from the European Center for Medium-Range Weather Forecasts) and PM 2.5 and NO 2 concentrations (sourced from a national spatiotemporal ensemble model) using decedent’s residential address at the time of death. A case-crossover design with conditional logistic regression was used to estimate the independent and interactive effects of WBGT max , PM 2.5 , and NO 2 on suicide. For exposure windows, we considered single days preceding suicide (lag 0 to 6) and their averages across preceding days (lag 0–1, 0–3, and 0–6). Analyses were stratified by season. Results: We identified a significant association between WBGT max and suicide across all seasons (odds ratio [OR] = 1.05, 95% confidence interval [CI]: 1.01, 1.10; per 5 °C increase on lag 0–3 days). The associations were stronger in the warm season (March 22 to September 21), with ORs and 95% CIs ranging from 1.08 (1.02, 1.15) to 1.20 (1.10, 1.30) per 5 °C increase depending on the lag periods. We observed synergistic interactions between WBGT max and PM 2.5 and NO 2 in the warm season, associated with higher odds of suicide. The associations of WBGT max with suicide were most pronounced at high NO 2 levels. Conclusions: We found evidence of synergistic interactions between WBGT max and PM 2.5 and NO 2 on suicide in the warm season, emphasizing the need for considering the combined effects of heat stress and air pollution in suicide prevention strategies.

Fine particulate matter↗

Long-Range Fit: A Software Package for the Representation and Study of Long-Range Molecular Interactions

Describing intermolecular forces is fundamental to modeling and predicting the behavior of molecular systems. In particular, long-range molecular interactions─with electrostatic, induction, and dispersion as the main components─play a critical role, especially for low-temperature and low-density regimes. Long-range interactions are often described through perturbation theory, representing the electronic charge distribution via a multipolar series of the moments and polarizability tensors corresponding to each molecule. However, while the theory is well established, obtaining the resulting analytical expressions (and their practical implementation) constitutes a highly complex and system-dependent task. To address this challenge, we developed long-range-fit (LRF), an interactive and user-friendly software package designed to automate the generation and fitting of long-range interaction terms for arbitrary molecules in nondegenerate (ground or excited) electronic states. We have derived and implemented all terms up to 15th order, without approximations, via a spherical tensor representation, with symmetry adaptation to all molecular point-group symmetries. The resulting potential energy surface is compatible with most representations of the close interaction region.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tailoring multi-dimensional hierarchical self-assembly of metallacages through balancing non-covalent interactions

Despite advances in non-covalent interactions and complex self-assembly, precise control of multi-dimensional hierarchical self-assembly (HSA) from the molecular level to larger scales remains challenging. Herein, we designed and synthesized two rigid tetratopic ligands with multiple preset driving forces, and assembled them with Zn(II) ions to obtain metallacages SC6 and SC12 . Through balancing multiple non-covalent interactions, including metal–organic coordination, hydrophobic, and π–π interactions, SC6 can hierarchically self-assemble driven by a poor solvent, from one-dimensional nanowires to super-helical nanostructures via non-equilibrium self-assembly, progressing continuously with time and the increasing proportion of the poor solvent. However, for SC12 with enhanced hydrophobic interactions, two-dimensional monolayer nanogrids were formed by hierarchical self-assembly. Notably, these structures can be recycled back to primary metallacages through simple dissolution, highlighting their potential for efficient recycling and reuse. These results demonstrate that multi-dimensional hierarchical structures enable precise construction by balancing non-covalent interactions through a bottom-up self-assembly approach. This study provides deeper insight into the mechanisms of HSA and a promising strategy for the tailored creation of complex structures and sustainable porous materials.

36 MATERIALS SCIENCE↗

Sensitivity of nEXO to 136 Xe charged-current interactions: Background-free searches for solar neutrinos and fermionic dark matter

We study the sensitivity of nEXO to solar neutrino charged-current interactions, 𝜈 𝑒 + 136 Xe → 136 Cs*+𝑒 − , as well as analogous interactions predicted by models of fermionic dark matter. Due to the recently observed low-lying isomeric states of 136 Cs, these interactions will create a time-delayed coincident signal observable in the scintillation channel. Here we develop a detailed Monte Carlo simulation of scintillation emission, propagation, and detection in the nEXO detector to model these signals under different assumptions about the timing resolution of the photosensor readout. We show this correlated signal can be used to achieve background discrimination on the order of 10 −9 , enabling nEXO to make background-free measurements of solar neutrinos above the reaction threshold of 0.668 MeV. We project that nEXO could measure the flux of neutrinos from the carbon-nitrogen-oxygen cycle with a statistical uncertainty of 25%, thus contributing a novel and competitive measurement toward addressing the solar metallicity problem. Additionally, nEXO could measure the mean energy of the 7 Be neutrinos with a precision of 𝜎 ≤ 1.5 keV and could determine the survival probability of 7 Be and pep solar 𝜈𝑒 with precision comparable to the state of the art. These quantities are sensitive to the Sun’s core temperature and to nonstandard neutrino interactions, respectively. Here, the strong background suppression would allow nEXO to search for charged-current interactions of fermionic dark matter in the mass range 𝑚 𝜒 = 0.668–7 MeV with a sensitivity up to three orders of magnitude better than current limits.

47 OTHER INSTRUMENTATION↗

Climate adaptation and sustainability in switchgrass: exploring plant-microbe-soil interactions across continental scale environmental gradients

Less carbon-intensive energy sources are needed to reduce greenhouse gas emissions and their predicted role in climate change. There is growing interest in the potential of biofuels for meeting this need. A critical question is whether large-scale biofuel production can be sustainable over the time scales needed to mitigate our carbon debt from fossil fuel consumption. The carbon balance and ultimately the sustainability of biofuel feedstock production is the result of complex climate-coupled interactions between carbon fixation, sequestration, and release through combustion. Similarly, the long-term productivity of biofuels depends on the environmental factors limiting plant growth. These factors are often related to soil resources which involve complex interactions at the plant-microbe-soil interface impacting their availability and cycling. Our collaborative project addressed sustainable switchgrass (Panicum virgatum) production by exploring Plant Systems, Plant-Microbiome Interactions, and Ecosystem Processes through the integrating lens of Multi-Scale Modeling. Our research was based on detailed characterization of genetically diverse switchgrass genotypes planted in common gardens across a continental latitudinal gradient. The underlying theme of our Plant Systems research was the use of locally adapted plant material to explore plant function, to understand the mechanistic basis of environmental interactions, and to discover the plant genes important for adaptation and sustainability in the face of climate change. Our Plant-Microbiome Interaction project characterized the microbial communities associated with switchgrass using genomic tools. Our Ecosystem Processes research focused on carbon cycle responses at the ecosystem level using stand level plantings. Finally, our Multi-Scale Modeling helped to define conditions of a sustainable biofuel system and identify key tradeoffs between genetic diversity, productivity, and ecosystem services. Genome-wide association analyses were used to identify alleles that contribute to successful establishment and biomass production across North America. Together, our work provided a baseline analyses of the potential of switchgrass as a biofuel feedstock. Our project resulted in a number of successful outcomes. First, we were successful in collecting switchgrass germplasm across the species range, propagating the material, and establishing common garden experiments across the species range. In collaboration with DOE JGI, we successfully assembled the first tetraploid switchgrass genome and published this resource with an analyses of the genetic basis local adaptation from our gardens (Lowry et al. 2019, Lovell et al. 2021). The gardens were used to characterize the genetic architecture for a number of important plant phenotypes. Our project also conducted extensive sampling and sequencing to characterize the bacterial and fungal associates of switchgrass roots and leaves. We showed that host genotype, location, and harvesting practices can play a role in microbiome assembly (Singer et al. 2019 & 2022, Van Wallendael et al. 2020 & 2022, Edwards et al. 2023). Our ecosystem processes work created baseline dataset of carbon and nutrient cycling in realistic stand plantings of switchgrass. Data from this experiment provided new insight into the role of plant traits, phenology, and local environments in ecosystem processes like soil respiration, net-ecosystem exchange, and dynamics of soil and plant nutrients (Ricketts et al. 2023). Finally, our crop modelling experiments help to characterize the sensitivity of common modeling frameworks to parameters, identify key limiters of productivity across large geographic scales, and leverage patterns of local adaptation in prediction. Ultimately, these studies help to identify critical plant-microbe-soil traits that may be manipulated, through breeding or agronomic management, to improve the sustainability of biofuel feedstocks.

09 BIOMASS FUELS↗

Investigating intermolecular interactions among CO 2 , water and PEEK-ionene membrane using cryo ToF-SIMS and isotopic labeling

Cryogenic time-of-flight secondary ion mass spectrometry (cryo ToF-SIMS) has emerged as a powerful tool for investigating molecular interactions, speciation, and dynamics in materials for CO 2 capture. In this study, we apply cryo ToF-SIMS to probe interactions between CO 2 , water, and PEEK-ionene membranes—a promising material for direct CO 2 capture due to its selectivity, durability, and efficiency. Despite this potential, the mechanisms governing CO 2 diffusion and the influence of water vapor on CO 2 behavior remain unclear. To address this, we loaded PEEK-ionene membranes with 13 CO 2 and D 2 O and employed cryo ToF-SIMS to visualize the 3D distribution of CO 2 and water within the membrane. While prior studies suggest that 13 CO 2 is absorbed under ambient conditions, our cryo ToF-SIMS analysis revealed no enhancement of the 13 C/ 12 C ratio, suggesting weak CO 2 -membrane interactions. As a result, CO 2 vaporizes even at low temperatures (−140°C) under vacuum conditions. In contrast, D 2 O displayed a relatively homogeneous distribution in the membrane, suggesting stronger water-membrane interactions via hydrogen bonding (18–20 kJ/mol). Interestingly, CO 2 was not detected in D 2 O-loaded membranes, indicating minimal interference from water vapor on CO 2 diffusion. As a comparison, the cryo ToF-SIMS data show that 13 CO 2 can readily react with a basic Na 2 CO 3 aqueous solution to form NaH 13 CO 3 . These findings demonstrate cryo ToF-SIMS as a critical technique for understanding gas-water-membrane interactions, offering insights for membrane functionalization to improve CO 2 capture efficiency.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influence of Polymer and Support Interactions on the Electrocatalytic Properties of Heterogenized Molecular Complexes

Heterogenized molecular catalysts have been the subject of increasing interest in the context of electrochemical small molecule activation due to the possibility of active site homogeneity and tunability, which can surpass many nanostructured materials. When molecular catalysts strongly interact with carbon supports through π–π interactions, they tend to show higher selectivity and activity during heterogeneous electrochemical reactions. Indeed, ligand modifications in the secondary sphere that allow for more π–π overlap between catalyst and carbon support often show improved performance. Interactions between catalyst and polymer binder are also a possible modulus of control in these reactions, either through coordinating moieties that interact with active sites or through control over substrate or product transport. Finally, the covalent linking of molecular complexes onto carbon materials has also been shown to result in high activity and stability. Recent advances in the use of carbon supports, both through covalent and non-covalent interactions, and polymers to alter small molecule activation by heterogenized molecular catalysts are summarized in this Perspective.

Johnson, Elizabeth K. [University of Virginia, Cha↗

Higher-order interaction effects among operating conditions and feedstocks shape reactor microbiomes and fatty acid production profiles

Arrested anaerobic digestion (AAD) offers a promising route for producing fatty acids (FAs) from organic residues, yet optimal conditions for selectively generating medium-chain fatty acids (MCFAs) remain poorly defined. Here, we systematically evaluated the main and interaction effects of pH (5, 7, 9), feedstock (food waste, manure), temperature (35 and 45 °C), and inoculum source on microbiome composition and FA production. Anaerobic digester sludge and a novel bison rumen inoculum were compared. Significant higher-order interactions among operating parameters governed FA profiles and microbiome structure. Butyric acid production was driven by a three-way interaction among pH, feedstock, and temperature (p < 0.001), with maximum concentrations achieved in food waste reactors at pH 5.0 and 35 °C (1.2 ± 0.1 g L −1 with sludge and 1.1 ± 0.3 g L −1 with rumen). MCFA production exhibited significant four-way interactions (p < 0.1 to p < 0.001). At 45 °C and pH 5.0, inoculum source tuned MCFA selectivity: sludge favored pentanoic acid (0.4 ± 0.1 g L −1 ), whereas rumen favored hexanoic and heptanoic acids (up to 0.4 ± 0.2 g L −1 ). Manure reactors produced < 0.2 g L −1 MCFAs under all conditions. Genera, including Megasphaera, Prevotella, and Lactobacillus, were associated with production of specific MCFAs. PICRUSt2-based pathway predictions were consistent with MCFA production patterns and suggested a potential role for lactic acid–driven chain elongation pathways. This study provides insights into how interacting operating conditions shape AAD microbiomes, their FA profiles, and advances the trajectory of research aimed at engineering robust and controllable microbiomes for waste valorization.

09 BIOMASS FUELS↗

Characterization of Fuel Cladding Chemical Interaction on a High Burnup U-10Zr Metallic Fuel via Electron Energy Loss Spectroscopy Enhanced by Machine Learning

Fuel cladding chemical interaction (FCCI) is one of the main performance limiting factors for metallic nuclear fuels. The interaction destabilizes the martensitic microstructure and deteriorates mechanical properties of HT-9 cladding. The detection of low atomic number elements (Z<10) and overlapping of elemental peaks can be problematic in interpreting energy dispersive X-ray spectroscopy (EDS) data. Electron energy loss spectroscopy (EELS) provides precise elemental edge energy values and can detect elements with a low atomic number. This work utilizes EELS to study the distribution of lanthanides and light elements at the interaction region. The sample was prepared from the FCCI region of a U-10Zr (wt.%) solid fuel with HT-9 cladding, irradiated to a burnup of 13.2 at.%. Processing the EELS data included three major steps: 1) enhance the signal to noise ratio by denoising the spectrum with principal component analysis (PCA) method, removing background and performing deconvolution; 2) identify chemical elements with core energy loss edges; 3) confirm different phases using a popular machine learning method, K-means. This work presents qualitative assessment of lanthanides and light elements like carbon (C) and oxygen (O) enhanced by the application of machine learning algorithms. By comparing with EDS elemental maps, EELS provides higher resolution chemical maps, reveals the distribution of carbon at the interaction region supporting the formation of zirconium carbide, a rind-like microstructure feature that was proposed to mitigate the chemical interaction. Furthermore, the plasmon peak map was also found to indicate an energy shift associated with the formation of phases/compounds. K-means clustering method was used on the processed electron energy loss (EEL) spectrum to automatically reveal different phases. The resulting clustered maps from K-means clustering align well with elemental maps confirming certain phases, especially Fe-Ce and Zr-C, in the FCCI region.

EELS↗

Synergetic Effects of Soil Organic Matter Components During Interactions with Minerals

Mineral-associated soil organic matter (SOM) is critical for stabilizing organic carbon and mitigating climate change. However, mineral-SOM interactions at the molecular scale, particularly synergetic adsorption through organic-organic interaction on the mineral surface known as organic multilayering, remain poorly understood. This study investigates the impact of organic multilayering on mineral-SOM interactions, by integrating macroscale experiments and molecular-scale simulations that assess the individual and sequential adsorption of major SOM compounds – lauric acid (lipid), pentaglycine (amino acid), trehalose (carbohydrate), and lignin onto soil minerals. Ferrihydrite, Al-hydroxide, and calcite are exposed to SOM compounds to determine adsorption affinities and binding energies. Results show that lauric acid has 20-40 times higher K d than pentaglycine, following the order K d (ferrihydrite) > K d (Al-hydroxide) >> K d (calcite). Molecular-scale simulations confirm that lauric acid has a higher binding energy (30.8 kcal/mol) on ferrihydrite than pentaglycine (6.0 kcal/mol), attributed to lipid hydrophobicity. The lower binding energy of pentaglycine results from its hydrophilic amide groups, facilitating partitioning into water. Sequential experiments examine how the first layer of lipid or amino acid affects the adsorption of carbohydrate/lignin, which show little or no individual adsorption affinities. Macroscale results reveal that lipid and amino acid adsorption induce ferrihydrite particle repulsion increasing reactive surface area and enhancing carbohydrate/lignin adsorption independently and synergistically through organic multilayering. Molecular-scale results reveal that amino acid adsorbed on ferrihydrite interacts more readily with lignin macroaggregates (preformed in solution) than with individual lignin units, indicating organic multilayering via H-bonding. Further, these findings reveal the molecular mechanisms of SOM-mineral interactions, crucial for enhancing soil carbon stabilization.

54 ENVIRONMENTAL SCIENCES↗

Improved Treatment of 1–4 Interactions in Force Fields for Molecular Dynamics Simulations

Traditional force fields commonly use a combination of bonded torsional terms and empirically scaled nonbonded interactions to capture 1-4 energies and forces of atoms separated by three bonds in a molecule. While this approach can yield accurate torsional energy barriers, it often leads to inaccurate forces and erroneous geometries and creates an interdependence between dihedral terms and nonbonded interactions, complicating parametrization and reducing transferability. Here, in this paper, we demonstrate that 1-4 interactions can be accurately modeled using only bonded coupling terms, eliminating the need for arbitrarily scaled nonbonded interactions altogether. Furthermore, by leveraging the automated parametrization capabilities of the Q-Force toolkit, we efficiently determine the necessary coupling terms without the need for manual adjustment. Our approach is first validated on a range of small molecule systems, encompassing both flexible and rigid structures, and shows a significant improvement in force field accuracy, obtaining subkcal/mol mean absolute error for every molecule tested. We further extend the bonded-only model for 1-4 interactions to Amber ff14sb, CHARMM36, and OPLS-AA force fields to reproduce ab initio gas and implicit solvent ϕ,ψ surfaces of alanine dipeptide.

Abdullah, Aalim S. [University of California, Berk↗

Assessing the Limitations of Self-Interaction-Corrected Functionals for Describing the Hydrated Electron

Simulating the hydrated electron using density functional theory is challenging due to the prevalence of self-interaction error in standard functionals. Hybrid functionals like PBEh(40) can reasonably describe the chemistry of an excess electron in water and partially mitigate self-interaction error by incorporating exact Hartree–Fock exchange, but they are computationally expensive making them impractical for large-scale and long-time ab initio molecular dynamics simulations. Explicit self-interaction correction schemes that are applied on an orbital-by-orbital basis offer a potential alternative when the correction is limited to the singly occupied molecular orbital obtained with a generalized gradient approximation functional. Here, we examine whether the Perdew–Zunger self-interaction correction scheme applied to the revPBE functional can provide a computationally efficient and physically sensible alternative to PBEh(40) for the hydrated electron. We find that functionals incorporating a self-interaction correction scheme should be viewed with caution when applied to the hydrated electron and its reactivity. Furthermore, we show that it is critical to consider extensive sampling and diverse chemical environments when validating their performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Chromatographic and Spectroscopic Study of the Interaction between Polysulfides and Copper Sulfides

To mitigate the “polysulfide shuttle” in lithium–sulfur batteries, different hosting materials that can interact with the polysulfide species physically or chemically have been widely investigated. Copper sulfides as one type of material are believed to have strong chemical interactions with the polysulfide species to consequently influence the performances of Li–S batteries. In this work, high-performance liquid chromatography (HPLC), electrospray ionization mass spectrometry (ESI/MS), scanning electron microscopy with energy-dispersive X-ray spectrometry (SEM-EDS), and inductively coupled plasma optical emission spectroscopy (ICP-OES) were used to systematically investigate the interactions between ether-based polysulfide solutions and copper sulfides (as well as silver sulfide). Furthermore, based on chromatographic and spectroscopic results, the interactions between polysulfides and Cu 2 S can be classified into two types of reactions: one is the redox reaction with the formation of CuS, while another is the complexation reaction with the formation of soluble LiCuS n (n ≥ 4). Contrarily, Ag 2 S (and CuS) shows no interactions with polysulfides. Accordingly, the cycling behaviors of Li–S batteries with copper sulfides as hosting materials or with copper as additives were explained reasonably.

25 ENERGY STORAGE↗

Dynamic Implications of Noncovalent Interactions in Amphiphilic Single-Chain Polymer Nanoparticles

Single-chain polymer nanoparticles (SCNPs) combine the chemical diversity of synthetic polymers with the intricate structure of biopolymers, generating versatile biomimetic materials. The mobility of polymer chain segments at length scales similar to secondary structural elements in proteins is critical to SCNP structure and thus function. However, the influence of noncovalent interactions used to form SCNPs (e.g., hydrogen-bonding and biomimetic secondary-like structure) on these conformational dynamics is challenging to quantitatively assess. To isolate the effects of noncovalent interactions on SCNP structure and conformational dynamics, we synthesized a series of amphiphilic copolymers containing dimethylacrylamide and monomers capable of forming these different interactions: (1) di(phenylalanine) acrylamide that forms intramolecular β-sheet-like cross-links, (2) phenylalanine acrylamide that forms hydrogen-bonds but lacks a defined local structure, and (3) benzyl acrylamide that has the lowest propensity for hydrogen-bonding. Each SCNP formed folded structures comparable to those of intrinsically disordered proteins, as observed by size exclusion chromatography and small angle neutron scattering. The dynamics of these polymers, as characterized by a combination of dynamic light scattering and neutron spin echo spectroscopy, was well described using the Zimm with internal friction (ZIF) model, highlighting the role of each noncovalent interaction to additively restrict the internal relaxations of SCNPs. These results demonstrate the utility of local scale interactions to control SCNP polymer dynamics, guiding the design of functional biomimetic materials with refined binding sites and tunable kinetics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Adsorption Hysteresis Under Control: Tuning Host–Guest Interactions via a Genetic Algorithm

Mesoporous adsorbent materials offer a large volumetric capacity; however, cyclic adsorption/desorption processes in these systems often suffer from hysteresis and may require a significant pressure swing to access this capacity. To mitigate hysteresis, a proposed strategy is to include nucleation sites on the walls of the mesoporous material to facilitate droplet and bubble formation, lowering the free energy barriers to the respective phase transitions. It is unclear, however, what combination of adsorbate− adsorbent interactions and spatial patterning would be beneficial for a given application, considering that improvements to some sorption properties may come at the expense of other attributes. To understand these interconnected observables, we examine two model systems, planar-slit and cylindrical pores with tunable interaction sites, using GPU-accelerated transition matrix Monte Carlo simulations. The simulations provide a free energy map of the pressure−adsorption space in a matter of minutes, which we use to track adsorption isotherm characteristics as a function of adsorbent properties. We then leverage the rapid acquisition of simulation data to construct a genetic algorithm to iteratively modify interaction sites of the slit-pore wall to minimize the hysteresis of this system without sacrificing uptake. We find that the adsorption branch of the isotherm is easily modulated via the average host−guest interaction strength, but desorption is only adjustable if there is a suitable bubble nucleation site. Within the context of a slit-pore system, we identify relative interaction strengths and patch sizes required to gain control over both branches of the hysteresis loop.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗