Search NASA⌕ Search

SEARCH · Search NASA

Results for “intrinsic”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Trees, bialgebras and intrinsic numerical algorithms

Preliminary work about intrinsic numerical integrators evolving on groups is described. Fix a finite dimensional Lie group G; let g denote its Lie algebra, and let Y(sub 1),...,Y(sub N) denote a basis of g. A class of numerical algorithms is presented that approximate solutions to differential equations evolving on G of the form: dot-x(t) = F(x(t)), x(0) = p is an element of G. The algorithms depend upon constants c(sub i) and c(sub ij), for i = 1,...,k and j is less than i. The algorithms have the property that if the algorithm starts on the group, then it remains on the group. In addition, they also have the property that if G is the abelian group R(N), then the algorithm becomes the classical Runge-Kutta algorithm. The Cayley algebra generated by labeled, ordered trees is used to generate the equations that the coefficients c(sub i) and c(sub ij) must satisfy in order for the algorithm to yield an rth order numerical integrator and to analyze the resulting algorithms.

Crouch, Peter↗
NASA NTRS1989

The correlation between the temperature dependence of the CRSS and the formation of superlattice-intrinsic stacking faults in the nickel-base superalloy PWA 1480

The PWA 1480 nickel-base superalloy is known to exhibit a unique minimum in the critical resolved shear stress (CRSS) at about 400 C. This paper reports an observation of a deformation mechanism whose temperature dependence correlates exactly with the reduction in the CRSS. It was found that, after monotonic or cyclic deformation of PWA 1480 at 20 C, the deformation substructures typically contain high density of superlattice-intrinsic stacking faults (S-ISFs) within the gamma-prime precipitates. As the temperature of deformation is increased, the density of S-ISFs is reduced, until finally no faults are observed after deformation in the range from 400 to 705 C. The reduction in the fault density corresponds exactly to the reduction in the CRSS, and the temperature at which the fault density is zero corresponds with the minimum in the CRRS. Two possible mechanisms related to the presence of the S-ISFs in the alloy are considered.

Milligan, Walter W.↗
NASA NTRS1989

Local parallel models for integration of stereo matching constraints and intrinsic image combination

Parallel relaxation computations such as those of connectionist networks offer a useful model for constraint integration and intrinsic image combination in developing a general-purpose stereo matching algorithm. This paper describes such a stereo algorithm that incorporates hierarchical, surface-structure, and edge-appearance constraints that are redefined and integrated at the level of individual candidate matches. The algorithm produces a high percentage of correct decisions on a wide variety of stereo pairs. Its few errors arise when the correlation measures defined by the constraints are either weakened or ambiguous, as in the case of periodic patterns in the images. Two additional mechanisms are discussed for overcoming the remaining errors.

Stewart, Charles V.↗
NASA NTRS1990

Measurement of the intrinsic bond strength of brittle thin films on flexible substrates

The brittle cracking and subsequent debonding of nickel films deposited on polymer substrates subjected to uniaxial strain is investigated. Stress analyses for a film/substrate system are performed. Based on the analysis, the interfacial bond strength between brittle thin films and flexible substrates can be evaluated in terms of the tensile strength of the coating and the length of the largest segment that first debonds. Experiments were performed on Ni films with different thicknesses evaporated on polyethylene terephthalate substrates and the intrinsic bond strength was evaluated. The interfacial bond strengths were shown to be relatively independent of the film thickness for the range studied.

Guo, Q.↗
NASA NTRS1991

Environmental fatigue of an Al-Li-Cu alloy. Part 1: Intrinsic crack propagation kinetics in hydrogenous environments

Deleterious environmental effects on steady-state, intrinsic fatigue crack propagation (FCP) rates (da/dN) in peak aged Al-Li-Cu alloy 2090 are established by electrical potential monitoring of short cracks with programmed constant delta K and K(sub max) loading. The da/dN are equally unaffected by vacuum, purified helium, and oxygen but are accelerated in order of decreasing effectiveness by aqueous 1 percent NaCl with anodic polarization, pure water vapor, moist air, and NaCl with cathodic polarization. While da/dN depends on delta K(sup 4.0) for the inert gases, water vapor and chloride induced multiple power-laws, and a transition growth rate 'plateau'. Environmental effects are strongest at low delta K. Crack tip damage is ascribed to hydrogen embrittlement because of the following: (1) accelerated da/dN due to part-per-million levels of H2O without condensation; (2) impeded molecular flow model predictions of the measured water vapor pressure dependence of da/dN as affected by mean crack opening; (3) the lack of an effect of film-forming O2; (4) the likelihood for crack tip hydrogen production in NaCl, and (5) the environmental and delta K-process zone volume dependencies of the microscopic cracking modes. For NaCl, growth rates decrease with decreasing loading frequency, with the addition of passivating Li2CO3, and upon cathodic polarization. These variables increase crack surface film stability to reduce hydrogen entry efficiency. The hydrogen environmental FCP resistance of 2090 is similar to other 2000 series alloys and is better than 7075.

Piascik, Robert S.↗
NASA NTRS1990

Pitch angle diffusion of newborn ions due to intrinsic turbulence in the solar wind

The objective of the present study is to understand the interaction of the solar wind with newborn ions in far upstream regions of a comet where the level of intrinsic turbulence is moderately low. Based on the assumption that quasi-linear theory is adequate and applicable, the pitch angle diffusion process and the time evolution of the newborn ion distribution function are investigated. Numerical solutions to the quasi-linear diffusion equation, including the effect of resonance broadening and that of continuous creation of newborn ions due to the ionization process, are obtained under several assumptions and approximations. It is found that theoretical results are consistent with the Giotto observations recently reported by Neugebauer et al. (1989).

Ziebell, L. F.↗
NASA NTRS1990

Intrinsic magnetic discontinuities and solar X-ray emission

The fundamental theorem of magnetostatic equilibrium predicts that the bipolar magnetic fields of active regions on the sun contain tangential discontinuities as an intrinsic part of their equilibrium. It appears that rapid reconnection at these many tangential discontinuities (nanoflares) is the primary source of heat that produces the X-ray emitting corona. The X-ray corona is then a cloud of nanoflares.

Parker, E. N.↗
NASA NTRS1990

Intrinsic bond strength of metal films on polymer substrates

A semiquantitative method for the measurement of the intrinsic bond strength between elastic substrates and elastic films that fail by brittle fracture is described. Measurements on a polyethylene terephthalate (PET)-Ni couple were used to verify the essential features of the analysis. It was found that the interfacial shear strength of Ni on PET doubled after ion etching.

Wheeler, Donald R.↗
NASA NTRS1991

Environmental fatigue of an Al-Li-Cu alloy. I - Intrinsic crack propagation kinetics in hydrogenous environments

Deleterious environmental effects on steady-state, intrinsic fatigue crack propagation (FCP) rates (da/dN) in peak aged Al-Li-Cu alloy 2090 are established by electrical potential monitoring of short cracks with programmed constant delta K and K(sub max) loading. The da/dN are equally unaffected by vacuum, purified helium, and oxygen but are accelerated in order of decreasing effectiveness of aqueous 1 percent NaCl with anodic polarization, pure water vapor, moist air, and NaCl with cathodic polarization. While da/dN depends on delta K(sup 4.0) for the inert gases, water vapor and chloride induced multiple power-laws, and a transition growth rate 'plateau'. Environmental effects are strongest at low delta K. Crack tip damage is ascribed to hydrogen embrittlement because of the following: (1) accelerated da/dN due to part-per-million levels of H2O without condensation; (2) impeded molecular flow model predictions of the measured water vapor pressure dependence of da/dN as affected by mean crack opening; (3) the lack of an effect of film-forming O2; (4) the likelihood for crack tip hydrogen production in NaCl; and (5) the environmental and delta K-process zone volume dependencies of the microscopic cracking modes. For NaCl, growth rates decrease with decreasing loading frequency, with the addition of passivating Li2CO3, and upon cathodic polarization. These variables increase crack surface film stability to reduce hydrogen entry efficiency. The hydrogen environmental FCP resistance of 2090 is similar to other 2000 series alloys and is better than 7075.

Piascik, Robert S.↗
NASA NTRS1992

Sapphire-fiber-based intrinsic Fabry-Perot interferometer

A sapphire optical fiber intrinsic Fabry-Perot interferometric sensor is demonstrated. A length of multimode sapphire fiber that functions as a Fabry-Perot cavity is spliced to a silica single-mode fiber. The interferometric signals of this sensor are produced by the interference between the reflection from the silica-sapphire fiber splice and the reflection from the free end face of the sapphire fiber. This sensor has been demonstrated for temperature measurement. A resolution of 0.2 C has been obtained over a measurement range of 310 C to 976 C.

Wang, Anbo↗
NASA NTRS1993

The velocity fields of elliptical galaxies: Steps toward a solution of the intrinsic shape problem

One of the few surviving signatures, at low redshift, of the process of galaxy formation should be the distribution of shapes of elliptical galaxies. Yet the problem of inferring this distribution from the observed ellipticals is still unsolved, because insufficient use has been made of kinematic information. The levels of 'sophistication' of the theoretical models and of the observations have up to now been poorly matched. The kinematic data available for most ellipticals consists of only major and minor axis spectra; and Franx et al. (1991) find, using simple geometric models, that the addition of only one kinematic parameter (the ratio of minor axis to major axis rotation velocity) to the photometry is just not enough to finely constrain the intrinsic shape distribution. On the other hand, the more elaborate self-consistent models (e.g., Levison and Richstone 1987, Statler 1987) have made only infrequent and model-dependent predictions of complicated velocity patterns, mostly at small radii, and have not discussed how they change with shape.

Statler, Thomas S.↗
NASA NTRS1992

Intrinsic chromospheric emission from Zeta Aurigae binaries

The question of whether the eclipses of Zeta Aur binaries reveal information about the chromospheres of single stars is addressed. It is concluded that Al II 2669 A, and the fluorescent iron lines, as well as CI II 2325 A are formed by the intrinsic thermal processes of the chromospheres of the K supergiant components of the Zeta Aur binaries. That these lines have roughly the same intensities as in single stars is a strong indication that the B components of Zeta Aur binaries do not alter the thermal physics of the chromosphere much, at least not in the bulk of the gas which forms the dominant chromospheric emission in normal stars.

Eaton, Joel A.↗
NASA NTRS1992

The intrinsic magnetic field and solar-wind interaction of Mars

The Venus-like interaction between the solar wind and the atmosphere of Mars is examined. The bow shock and magnetosheath of Mars indicate the presence of an obstacle to the solar wind that is somewhat larger than the size of the planet and its observed ionosphere, and also relatively larger than the Venus obstacle under comparable conditions. The intrinsic magnetic field of Mars must be no greater than 1.5 x 10 exp 12 T/cu m, or about 0.0001 times as strong as that of the earth to produce an obstacle of such small size. At least for solar minimum conditions, like those prevailing at the time of the Viking Landers, the ionospheric plasma (thermal) pressure is insufficient to balance the incident solar-wind pressure by itself. The ion and electron temperatures in the Martian ionosphere indicate the presence of local horizontal magnetic fields and heat sources in excess of solar radiation alone.

Luhmann, J. G.↗
NASA NTRS1993

Long-term changes in Jovian synchrotron radio emission - Intrinsic variations or effects of viewing geometry?

Possible causes of the observed long-term variation of Jovian synchrotron radio emission, including both intrinsic changes in the Jovian radiation belts and apparent changes due to variations in the Jovigraphic declination of the earth, D sub E, are investigated. An increase in diffusion rate with other parameters held constant results in an inward displacement of the peak emission radial distance that is not observed. Effects of viewing geometry changes are examined. The possible importance of such effects is suggested by a correlation between the total decimetric radio flux and D sub E, which varies between -3.3 and +3.3 deg during one Jovian orbital period. Because the Jovian central meridian longitudes where the magnetic latitude passes through zero during a given Jovian rotation change substantially with D sub E and since significant longitudinal asymmetries exist in both the volume emissivity and the latitudinal profile of the beam, the total intensity should be at least a partial function of D sub E.

Hood, Lon L.↗
NASA NTRS1993

Separation of topographic and intrinsic backscatter variations in biscopic radar images: A magic airbrush

Shaded-relief maps portraying landforms as they would appear in the absence of variations in the intrinsic brightness of the surface are a venerable and extremely useful tool in planetary geology. Such maps have traditionally been produced by a highly labor intensive manual process. Skilled cartographer-artists develop detailed mental images of landforms by meticulous scrutiny of all available data, and are able to use an airbrush and electric eraser to draw these images on a map. This process becomes increasingly time-consuming or even impossible if - as is true for radar data in general and Magellan data in particular - the effects on image brightness of varying scattering properties greatly outweigh those of slope variations. Because of the difficulty of interpreting relief in the Magellan images, the airbrush technique is being used only to remove obvious artifacts from low-resolution, shaded-relief images computed digitally from altimetric data. A surprisingly simple digital-processing technique that can be applied to pairs of radar images to produce shaded-relief-like results at the full image resolution is described. These shaded-relief images can be used not only as base maps, but to improve the accuracy of quantitative topographic mapping by radarclinometry and stereoanalysis.

Kirk, R. L.↗
NASA NTRS1994

The intrinsic shape of NGC 3379

Photometric and kinematic data from the literature are combined with new dynamical models to derive the intrinsic shape of the 'standard' elliptical galaxy NGC 3379. The parameters that are best constrained are the dynamical triaxiality T (essentially the triaxiality of the total mass distribution) and the short-to long axis ratio of the light distribution c(sub L). The inferred shape is given by a Bayesian probability distribution in the (T, c(sub L) plane. Assuming a uniform prior, the most probable shape is oblate with a flattening of c(sub L) = 87. The distribution is strongly non-Gaussian, however, and the expectation values, (T) = .31 (c(sub L) = .75, imply a flatter and more triaxial figure. The 68% highest posterior density region allows more triaxial shapes as long as they are fairly round, or flatter shapes as long as they are nearly oblate. These results are essentially unchanged if the galaxy is assumed to rotate about its short axis, or if it is modeled as an S0 with a negligible-mass disk rather than as an elliptical. The suggestion of Capaccioli et al. (ApJ, 371, 535 (1991)) that NGC 3379 is a rather flat, triaxial S0 galaxy is found to be improbable at the 98% level; this conclusion is largely independent of the bulge-to-disk ratio or the relative rotation speeds of the two components.

Statler, Thomas S.↗
NASA NTRS1994

The intrinsic nuclear spectrum of NGC 1068

We have inferred the intrinsic optical, UV and X-ray continuum of the obscured Seyfert nucleus of NGC 1068, using small aperture and polarized flux data to separate host galaxy contamination from reflected nuclear light. In support of popular unification models, we find it to be similar to typical type 1 Seyfert galaxy and quasar continua. The bolometric luminosity of the active nucleus is 2.2 x 10(exp 11) (f(sub refl)/0.01)(exp -1)(D/22Mpc)(exp 2) L(sub sun), where f(sub refl) is the fraction of nuclear flux reflected into our line of sight and D is the distance to NGC 1068.

Pier, Edward A.↗
NASA NTRS1995

The reliability of X-ray constraints of intrinsic cluster shapes

Using the simulation of Katz & White (1993) we have tested the viability of X-ray analysis for constraining the intrinsic shapes of clusters of galaxies considering the effects of both substructure and steep temperature gradients. We restrict our analysis to the aggregate shapes of clusters on scales of r approximately 1-2 Mpc in order to reduce our sensitivity to subclustering in the core. For low redshifts (z less than or approximately = 0.25) the X-ray method accurately measures the true ellipticity of the three-dimensional cluster dark matter provided the inclination of the cluster is known to within approximately 30 deg; assuming the gas is isothermal adds only small errors to the derived shapes. At higher redshifts the X-ray method yields unreliable results since the gas does not trace the cluster gravitational potential. We proffer some necessary conditions for the reliability of X-ray methods characterized by both the amount of substructure in the X-ray surface brightness images and the shapes of the isophotes. We conclude that measurements of the aggregate shapes of clusters on scales r approximately 1-2 Mpc are insensitive to core substructure representing scales of a few hundred kpc. Therefore our results suggest that the X-ray measurements of aggregate cluster shapes by Fabricant, Rybicki, & Gorenstein (1984) and Buote & Canizares (1992) are valid provided that they do not suffer from serious projection effects. A substantial number of Abell clusters observed with the ROSAT PSPC will be amenable to X-ray shape analysis.

Buote, David A.↗