Search NASA⌕ Search

SEARCH · Search NASA

Results for “ion cooperativity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Cu Doping Increases Capacity Retention in LiNi 0.6 Mn 0.2 Co 0.2 O 2 (NMC622) by Altering the Potential of the Ni-Based Redox Couple and Inhibiting Particle Pulverization

To discern the influence of Cu 2+ as a dopant on both the structural and electrochemical characteristics of LiNi 0.6 Mn 0.2 Co 0.2 O 2 (NMC622), Cu 2+ (aq) was added to the coprecipitation synthesis from the constituent ions. At 5 mol % Cu 2+ , a single-phase Cu-NMC product results, evidenced by an increase in d-spacing along the [003] and [104] directions and a slight increase in the crystal volume of the R–3m hexagonal (rock-salt superstructure) lattice. XRD data and high-resolution TEM imaging support Cu 2+ doping primarily on the transition metal 3b Wyckoff sites. Here, galvanostatic cycling of Cu-NMC shows a reversible gravimetric capacity of 102 mAh/g compared to 136 mAh/g for undoped NMC. Despite the lower capacity, the discharge capacity retention of Cu-NMC is 89% after 100 cycles compared to only 70% for NMC. XPS analysis reveals that this lower capacity is due to an increase in the concentration of Ni 3+ ions at the surface, while XRD data collected at the top and bottom of charge show a smaller decrease in crystalline domain size for Cu-NMC (40.5% decrease) compared to NMC (74.7% decrease), translating to pulverization of the secondary particles.

25 ENERGY STORAGE↗
DOE OSTI2026

Molecular To Mesoscale Targeting of Oxoanions with Multi-Tasking Hosts

Achieving a better understanding of anion interactions both in solution and crystalline state was the overarching goal of this project. Anions are everywhere throughout Nature and play important roles in biological and environmental processes. They can be beneficial or deleterious or both in different situations and concentrations. For either reason it is important to have molecules that can bind anions for key needs that benefit society. However, recognition of specific anions is challenging due to the diffuse nature of their negative charge(s) as well as their various shapes and sizes. Understanding the basic properties of anions and how they interact with other molecules and ions in surrounding environments is key to selective recognition. In this project multi-tasking molecules for selective binding of targeted anions were designed to achieve cooperativity and synergism in one rather than multiple host molecules, including (1) cation:anion pair hosts for anions with charges of -2 or greater; (2) pH and redox activated hosts for on-off binding and release; and (3) multiple anion capture in extended host networks. Our design strategy was to combine the use of simple inexpensive building blocks and high yield synthetic pathways to provide economically feasible scale-up for applications. Oxoanions representing multiple shapes and charges were chosen based on having the potential for significant impact on DOE separations needs. Amide/amine-based macrocycles and urea/amine-based chelates and macrocycles with multiple hydrogen bonding sites provided the basic anion-binding frameworks. Successful multi-tasking outcomes were forthcoming in all three tasks. In Task 1, successful ion pair binding for anions with multiple charges was achieved. Furthermore, the ion pair molecules were capable of extended interactions through supramolecular intertwining, like fishing nets for capturing pools of fish (also fitting with Task 3). In Task 2, molecules were synthesized possessing on-off switches. These included a pH sensitive sensor for on-off binding of anions in general, as well as an electrochemical sensor selective for sulfate capture. Three new classes of extended anion host networks capable of binding multiple ions was a major outcome of Task 3. These systems included: anion sensitive, fluorescent organogels; channel-forming macrocycles for studying anion-water including larger macrocyclic cluster sandwiches; and, the offshoot of Task 1, fishing net ion-pair networks for higher valent anions. These strategies can be expanded in the future to other ions and molecules for a better understanding of intermolecular and interionic interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Novel deuterium–tritium (DT) neutron activation diagnostics for increased neutron yield operations at Sandia’s Z-facility (invited)

As inertial confinement fusion experiments at Sandia National Laboratories’ Z-facility begin using deuterium–tritium (DT) fuels, the expected DT-neutron yields are expected to increase many orders of magnitude. This brings about the need for diagnostics that have a significantly higher dynamic range of operation and ability to obtain yields where there will be significant radiation holds. Using the current activation diagnostic infrastructure at the Z-facility, a pair of activation diagnostics are being developed. Here, the first is fluorine activation, which will be used in a similar manner to current copper activation diagnostics that are fielded in a rabbit for quick removal from the experiments without opening the vacuum experiment containment. The second is a prompt DT-neutron detector that exploits the activation of oxygen with similar operation characteristics as the current Be-probes fielded at Z. We will discuss the design of this pair of instruments, along with calibration work performed at Sandia’s Ion Beam Laboratory in support of the development and anticipated instrument performance.

Mangan, Michael Antony↗
DOE OSTI2020

Tunable and Cooperative Thermomechanical Properties of Protein-Metal-Organic Frameworks

We recently introduced protein-metal-organic frameworks (protein-MOFs) as chemically designed protein crystals, composed of ferritin nodes that predictably assemble into 3D lattices upon coordination of various metal ions and ditopic, hydrox-amate-based linkers. Owing to their unique tripartite construction, protein-MOFs possess extremely sparse lattice connectivi-ty, suggesting that they might display unusual thermomechanical properties. Leveraging the synthetic modularity of ferritin-MOFs, we investigated the temperature-dependent structural dynamics of six distinct frameworks. Our results show that the thermostabilities of ferritin-MOFs can be tuned through the metal component or the presence of crowding agents. Our stud-ies also reveal a framework that undergoes a reversible and isotropic first-order phase transition near-room temperature, corre-sponding to a 4% volumetric change within ≤1 deg C and a hysteresis window of ~10 deg C. Here, this highly cooperative crystal-to-crystal transformation, which stems from the soft crystallinity of ferritin-MOFs, illustrates the advantage of modular con-struction strategies in discovering tunable–and unpredictable–material properties.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Charge-Separated and Lewis Paired Metal–Organic Framework for Anion Exchange and CO 2 Chemical Fixation

Charge-separated metal–organic frameworks (MOFs) are a unique class of MOFs that can possess added properties originating from the exposed ionic species. A new charge-separated MOF, namely, UNM-6 synthesized from a tetrahedral borate ligand and Co 2+ cation is reported in this paper. UNM-6 crystalizes into the highly symmetric P43n space group with fourfold interpenetration, despite the stoichiometric imbalance between the B and Co atoms, which also leads to loosely bound NO 3 – anions within the crystal structure. These NO 3 – ions can be quantitatively exchanged with various other anions, leading to Lewis acid (Co 2+ ) and Lewis base (anions) pairs within the pores and potentially cooperative catalytic activities. For example, UNM-6-Br, the MOF after anion exchange with Br – anions, displays high catalytic activity and stability in reactions of CO 2 chemical fixation into cyclic carbonates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1986

Transition metal-ligand bonding. II

The nature of the bonding of CO, H2O, and NH3 to transition metal atoms is analyzed using the constrained-space-orbital-variation (CSOV) technique. The cooperative effects for Ni(CO)2 are found to be different than those for Ni(H2O)2. The bonding between neutral systems and the positive ions is found to be quite different; NiCO(+) has little pi bonding, while NiCO has strong pi bonding. The positive ion of NiH2O is far more strongly bound than the neutral, while for NiCO the positive ion and neutral are bound by about the same energy.

Bauschlicher, C. W., Jr.↗
NASA NTRS1986

Very energetic gamma-rays from the June 3, 1982 solar flare

The Gamma-Ray Spectrometer on the SMM satellite has recorded high-energy gamma-ray and neutron emission from the flare on June 3, 1982. During the 65-s impulsive phase the gamma rays above 10 MeV contain emissions from both primary electron bremsstrahlung and nuclear pion decay. Hence the impulsive phase acceleration process must produce both primary electrons with energies above 60 MeV and ions above 500 MeV. This flare also has a extended emission phase lasting more than 1000 s which is most easily observed at gamma-ray energies above 10 MeV. After removing the counting rates from the more slowly moving neutrons produced at earlier times, the resulting gamma ray spectrum can be entirely explained by nuclear pion production. Over 70 percent of the pions were produced in the extended emission phase. In contrast, more than 70 percent of the high-energy primary electron bremsstrahlung and the nuclear line emission produced by ions below 30 MeV occurred in the 65-s impulsive phase. This represents the first clear observation of a new acceleration process which produces an electron-deficient, very hard ion spectrum extending beyond 1000 MeV.

Forrest, D. J.↗
NASA NTRS2024

The Plasma Proton Environment within Saturn’s F-G Ring Gap as Observed by the Cassini Plasma Spectrometer Ion Mass Spectrometer during Saturn Orbit Insertion

We report on the detection of protons and the potential detection of H 2 + between Saturn's F and G rings based on Cassini Plasma Spectrometer (CAPS) Ion Mass Spectrometer (IMS) time-of-flight (TOF) composition measurements acquired during Saturn Orbit Insertion (SOI) outbound pass. The range in dipole L shell is 2.3 < L < 2.8. Initial results based on TOF data were presented in E. C. Sittler et al., 2017. Here we present the latest results of our analysis. During the SOI outbound pass between the F and G rings the CAPS IMS was in a mode of reduced post-acceleration voltage at -6 kV instead of the usual -14.6 kV. This reduced voltage still allows the analysis of protons since 6 keV protons are minimally scattered by the instrument’s ultrathin carbon foils when compared to heavier ions O + and O 2 + , scattering. Background noise from penetrating radiation and ghost peaks produced by foil-scattered O + ions within the instrument were considered in our analysis. The analysis allowed determination of the proton density, temperature and flow velocity, accounting for spacecraft potential by assuming a convected Maxwellian for the proton velocity distribution function. We find average proton density n P = 3.2 ± 1.1 #/cm 3 , proton temperature T P = 1.74 ± 0.12 eV, proton rotational flow speed V P = 24 ± 1.5 km/s and spacecraft potential  SC = -0.8 ±1.5 V. These results are compared with previous theoretical estimates of H + and H 2 + ions within Saturn’s inner magnetosphere.

E C Sittler↗
NASA NTRSDate not supplied

Battery Failure Databank

The Battery Failure Databank contains thermal runaway results gathered from nearly 300 small format fractional thermal runaway calorimetry (S-FTRC) experiments. A majority of these experiments were conducted at synchrotron facilities where high-speed x-ray videography was conducted of the cell while tested inside of the S-FTRC. The databank is a two-component system which consists of a Microsoft ExcelTM spreadsheet which provides S-FTRC results in tabular format and a radiographic video library containing the high-speed x-ray videos. Overall, the databank provides thermal results from S-FTRC experiments conducted on a mixture of commercially available lithium-ion (Li-ion) cells and specialized Li-ion test cells with varying cell format (18650, 21700, and D-cell) and trigger mechanism (heaters, heaters plus internal short circuiting device, and nail penetration). The radiography video component provides insight into the initiation and propagation of TR in the cells, in addition to consequences of TR measured by the FTRC. Fractions of mass ejected for the cell types are separated into regimes based on the different failure modes of the cells, such as purely venting, partial ejection, and total ejection. With knowledge of the rate and characterization of the internal degradation of the cells during TR, and the amounts of mass ejected and unrecovered, the extent of TR, and therefore the mitigation of TR, is revealed relative to cell types and failure modes.

Lithium-ion battery↗
NASA NTRSDate not supplied

Comparative Analysis of Thermal Runaway Heat Output as a Function of Trigger Mechanism and Cell Format

High demand for energy storage systems across many fields drives the need for safe and reliable Li-ion batteries. In order to assess the risk of using such batteries in various applications, many types of abuse tests have been developed to push battery cells to their limits and learn how they fail. In this work, internal short circuit (ISC) tests, nail penetration tests, and thermal tests were used to trigger thermal runaway in D-cell, 18650, and 21700 Li-ion cells. High-speed radiography was used to gain insight to the propagation of thermal runaway throughout the cell, while calorimetric and thermal data were recorded in real time. Post-test disassembly of the calorimeter allowed for any mass ejected from the cell to be analyzed and the distribution of mass through the calorimeter to be determined. The impact of cell geometry and trigger mechanism on post-test mass distribution, thermal runaway propagation and internal cell temperature are discussed.

Lithium-ion battery; thermal runaway; calorimetry;↗
DOE OSTI2020

Polyphosphonates as ionic conducting polymers

Polyphosphonates, a class of polymers with the generic formula –[P(R)(X)–OR'O] n –, exhibit a high degree of modularity due to the range of R, R', and X groups that can be incorporated. As such, these polymers may be designed with a polyethylene oxide (PEO) backbone (R' group) and employed as solid polymer electrolytes (SPEs). Two PEO-containing polyphosphonate analogs (R = Ph; X = S or Se) were doped with LiPF 6 and their conductivities were measured. Conductivities were similar (X = S) to or exceeding (X = Se) those of standard PEO systems (just below 10 -4 S/cm at 100°C). Binding models for Li + were generated using 31 P{ 1 H}NMR titration experiments. Binding of Li + by these polyphosphonates followed a positive cooperativity model, and varying the X group (S or Se) affected the observed cooperativity (Hill coefficient = 1.73 and 4.16, respectively). The presence of Se also leads to an increase in conductivity as temperature is raised above the T g , which is likely an effect of reduced Columbic interactions. Finally, because of their modularity and ease with which cation binding can be evaluated using 31 P{ 1 H} NMR titration experiments, polyphosphonates offer a unique approach for the modification of Li + ion battery technology.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Interplay between electron localization, magnetic order, and Jahn-Teller distortion dictates LiMnO2 phase stability

The development of manganese (Mn)-rich cathodes for Li-ion batteries promises to alleviate potential supply chain bottlenecks in battery manufacturing. Fundamental challenges in Mn-rich cathodes arise from phenomena such as structural changes due to cooperative Jahn-Teller (JT) distortions of in octahedral environments, Mn migration, and phase transformations to spinel-like order, all of which affect the electrochemical performance. These physically complex phenomena motivate an re-examination of the Li-Mn-O rock-salt space, with a focus on the thermodynamics of the prototypical, polymorphs. It is found that the generalized gradient approximation (GGA-PBEsol) and meta-GGA ( ) density functionals with empirically fitted on-site Hubbard corrections yield spurious stable phases for , such as predicting a phase with -like order ( ) to be the ground state instead of the orthorhombic (Pmmn) phase, which is the experimentally known ground state. Accounting for antiferromagnetic order in each structure is shown to have a substantial effect on the total energies and resulting phase stability. By using hybrid-GGA (HSE06) and GGA with self-consistent Hubbard parameters (on-site and inter-site ) calculated from linear response theory, the experimentally observed phase stability trends are recovered. The calculated on-site between Mn- states in the experimentally observed orthorhombic, layered, and spinel phases are significantly smaller than in and disordered layered structures, by within GGA. The smaller values of are shown to be correlated with a collinear ordering of JT distortions, in which all orbitals are oriented in the same direction. This cooperative JT effect can lead to greater electron delocalization from Mn along the states due to increased Mn-O covalency, which contributes to the greater electronic stability compared to the phases with noncollinear JT arrangements. The structures with collinear ordering of JT distortions also generate greater vibrational entropy, which helps stabilize these phases at high temperature. These phases are shown to be strongly insulating with large calculated band gaps , which are computed using HSE06 and .

Kam, Ronald L↗
NASA NTRS1974

Photoelectron angular distributions as a probe of anisotropic electron-ion interactions

Expressions are given for atomic photoelectron angular distributions in LS coupling in which the role of anisotropic final state electron-ion interactions emerges explicitly. Calculations of photoelectron angular distributions for atomic sulfur are presented in which these anisotropic interactions produce pronounced deviations from the predictions of the Cooper-Zare model. Such effects are expected to be a general feature of photoelectron angular distributions for most open shell atoms.

Dill, D.↗
NASA NTRS1974

Photoelectron angular distributions as a probe of anisotropic electron-ion interactions

Expressions are given for atomic photoelectron angular distributions in LS coupling in which the role of anisotropic final state electron-ion interactions emerges explicitly. Calculations of photoelectron angular distributions for atomic sulfur are presented in which these anisotropic interactions produce clear deviations from the predictions of the Cooper-Zare model. Such effects are expected to be a general feature of photoelectron angular distributions for most open-shell atoms.

Dill, D.↗