Search NASA⌕ Search

SEARCH · Search NASA

Results for “irreversible processes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Amorphous and crystalline TiO 2 nanoparticle negative electrodes for sodium-ion batteries

Titanium dioxide (TiO 2 ) is a promising negative electrode for sodium ion batteries (SIBS). Although TiO 2 materials with amorphous (A-TiO 2 ) and single-phase crystalline structures (C-TiO 2 ) have been separately explored, the study to compare the fundamental electrochemistry of A-TiO 2 and C-TiO 2 is limited. In this work, we investigated A-TiO 2 and C-TiO 2 nanoparticles with identical chemical composition and morphology. C-TiO 2 exhibits enhanced electrochemical performance than A-TiO 2 in terms of rate capability and cycle life. Cyclic voltammetry (CV) analysis suggests reversible Na ion insertion/extraction in C-TiO 2 . However, such process is irreversible in the case of A-TiO 2 . The charge storage mechanisms in both samples were studied to show that diffusion-controlled intercalation process becomes significant in C-TiO 2 sample. The C-TiO 2 sample has a better Na + diffusivity measured through the galvanostatic intermittent titration technique (GITT) compared to A-TiO 2 , which corroborates well with the rate capability study. Furthermore, the evolution of local structure of the TiO 2 samples was analyzed by ex situ pair distribution function (PDF) to understand the variation in electrochemical properties. In conclusion, it reveals that the corner-shared Ti-Ti distance along Na ion diffusion pathway increases with the increase of crystallinity, leading to the expanded diffusion channels and therefore more active sites and faster diffusion.

25 ENERGY STORAGE↗

Morphological and Surface Structural Changes during Electrochemical Cycling in Li-rich Layered Oxides for Next Generation Li-ion Batteries

Li-rich layered oxides, either as a solid solution or as a nano-composite of layered Li 2 MnO 3 and Li(TM)O 2 (TM=Ni, Co, Mn), draw significant attention as the next-generation cathode materials for high-energy-density Li-ion batteries in electric vehicles. However, there are many issues still unclear, and numerous scientific challenges of these materials that must be overcome to realize their utilization in commercial Li-ion batteries. The first drawback is the irreversible voltage degradation process that limits cycle life. Modified co-precipitation synthesis is introduced to obtain morphology controlled Li-rich material without ammonia addition. This unique design increases meso-structure morphological stability compared with the sample with large secondary particles as proved by Transmission X-ray Microscope. As a result, the voltage decay and capacity loss during long term cycling have been minimized to a large extent. On the other hand, lattice oxygen plays an intriguing role in the electrochemical process of Li-rich material through a reversible redox process as well as an irreversible oxidation with O 2 gas release. To prevent oxygen gas generation, oxygen vacancies have been proposed to form on the surface of the morphology controlled Li-rich layered oxides through the design of a gas-solid interface reaction (GSIR). Dynamic structural changes during the initial two electrochemical cycles of GSIR Li-rich layered oxides are investigated with In operando synchrotron X-ray diffraction (SXRD). Different electrochemical reaction regions dominated by either cations or anions redox are identified in the shifts of the lattice parameters during the first cycle. Changes in lattice parameters, oxygen positions, and microstrain help to explain the lithium de-intercalation mechanism in this class of materials.

Zhang, Minghao↗

Non-Destructive Monitoring of Charge-Discharge Cycles on Lithium Ion Batteries using 7 Li Stray-Field Imaging

Magnetic resonance imaging provides a noninvasive method for in situ monitoring of electrochemical processes involved in charge/discharge cycling of batteries. Determining how the electrochemical processes become irreversible, ultimately resulting in degraded battery performance, will aid in developing new battery materials and designing better batteries. Here we introduce the use of an alternative in situ diagnostic tool to monitor the electrochemical processes. Utilizing a very large field-gradient in the fringe field of a magnet, stray-field-imaging (STRAFI) technique significantly improves the image resolution. These STRAFI images enable the real time monitoring of the electrodes at a micron level. It is demonstrated by two prototype half-cells, graphite ∥Li and LiFePO 4 ∥ Li, that the high-resolution 7 Li STRAFI profiles allow one to visualize in situ Li-ions transfer between the electrodes during charge/discharge cyclings as well as the formation and changes of irreversible microstructures of the Li components, and particularly reveal a non-uniform Li-ion distribution in the graphite.

25 ENERGY STORAGE↗

Nanoparticle shape evolution and proximity effects during tip-induced electrochemical processes

The voltage spectroscopies in scanning probe microscopy (SPM) techniques are widely used to investigate the electrochemical processes in nanoscale volumes, which are important for current key applications, such as batteries, fuel cells, catalysts, and memristors. The spectroscopic measurements are commonly performed on a grid of multiple points to yield spatially resolved maps of reversible and irreversible electrochemical functionalities. Hence, the spacing between measurement points is an important parameter to be considered, especially for irreversible electrochemical processes. Here, we report nonlocal electrochemical dynamics in chains of Ag particles fabricated by the SPM tip on a silver ion solid electrolyte. When the grid spacing is small compared with the size of the formed Ag particles, anomalous chains of unequally sized particles with double periodicity evolve. This behavior is ascribed to a proximity effect during the tip-induced electrochemical process, specifically, size-dependent silver particle growth following the contact between the particles. In addition, fractal shape evolution of the formed Ag structures indicates that the growth-limiting process changes from Ag + /Ag redox reaction to Ag + -ion diffusion with the increase in the applied voltage and pulse duration. Our study shows that characteristic shapes of the electrochemical products are good indicators for determining the underlying growth-limiting process, and emergence of complex phenomena during spectroscopic mapping of electrochemical functionalities.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Elucidating the Irreversible Mechanism and Voltage Hysteresis in Conversion Reaction for High-Energy Sodium-Metal Sulfide Batteries

We present that irreversible electrochemical behavior and large voltage hysteresis are commonly observed in battery materials, in particular for materials reacting through conversion reaction, resulting in undesirable round-trip energy loss and low coulombic efficiency. Seeking solutions to these challenges relies on the understanding of the underlying mechanism and physical origins. Here, this study combines in operando 2D transmission X-ray microscopy with X-ray absorption near edge structure, 3D tomography, and galvanostatic intermittent titration techniques to uncover the conversion reaction in sodium–metal sulfide batteries, a promising high-energy battery system. This study shows a high irreversible electrochemistry process predominately occurs at first cycle, which can be largely linked to Na ion trapping during the first desodiation process and large interfacial ion mobility resistance. Subsequently, phase transformation evolution and electrochemical reaction show good reversibility at multiple discharge/charge cycles due to materials' microstructural change and equilibrium. The origin of large hysteresis between discharge and charge is investigated and it can be attributed to multiple factors including ion mobility resistance at the two-phase interface, intrinsic slow sodium ion diffusion kinetics, and irreversibility as well as ohmic voltage drop and overpotential. In conclusion, this study expects that such understandings will help pave the way for engineering design and optimization of materials microstructure for future-generation batteries.

25 ENERGY STORAGE↗

LLNL compiled first pages ordered by ascending B&R code

We aim to develop a fundamental understanding of materials dynamics (from {micro}s to ns) in systems where the required combination of spatial and temporal resolution can only be reached by the dynamic transmission electron microscope (DTEM). In this regime, the DTEM is capable of studying complex transient phenomena with several orders of magnitude time resolution advantage over any existing in-situ TEM. Using the unique in situ capabilities and the nanosecond time resolution of the DTEM, we seek to study complex transient phenomena associated with rapid processes in materials, such as active sites on nanoscale catalysts and the atomic level mechanisms and microstructural features for nucleation and growth associated with phase transformations in materials, specifically in martensite formation and crystallization reactions from the amorphous phase. We also will study the transient phase evolution in rapid solid-state reactions, such as those occurring in reactive multilayer foils (RMLF). Program Impact: The LLNL DTEM possesses unique capabilities for capturing time resolved images and diffraction patterns of rapidly evolving materials microstructure under strongly driven conditions. No other instrument in the world can capture images with <10 nm spatial resolution of interesting irreversible materials processes such as phase transformations, plasticity, or morphology changes with 15 ns time resolution. The development of this innovative capability requires the continuing collaboration of laser scientists, electron microscopists, and materials scientists experienced in time resolved observations of materials that exist with particularly relevant backgrounds at LLNL. The research team has made observations of materials processes that are possible by no other method, such as the rapid crystallization of thin film NiTi that identified a change in mechanism at high heating rates as compared to isothermal anneals through changes in nucleation and growth rates of the crystalline phase. The project is designed to reveal these fundamental processes and mechanisms in rapid microstructure evolution that form the foundation of understanding that is an integral part of the DOE-BES mission.

36 MATERIALS SCIENCE↗

New perspectives on materials and device dynamics using time-resolved full-field diffraction X-ray imaging

Understanding how materials evolve during synthesis, processing, or device operation requires experimental access to structural dynamics across wide ranges of length and time scales, often in bulk samples or even within packaged devices. Time-resolved full-field diffraction X-ray microscopy has recently emerged as a powerful way to meet this need by combining the penetration and structural sensitivity of X-ray diffraction with objective-lens-based magnification, sensitive high-resolution X-ray imaging detectors, and pump-probe and real-time imaging strategies. Advances in full-field X-ray diffraction microscopy, often termed dark-field X-ray microscopy (DFXM), enable simultaneous imaging of extended fields of view while retaining crystallographic selectivity. Time-resolved DFXM promises to enable advances in materials processing and dynamics, electrochemical and photochemical processes, and the design of electronic devices. This Perspective summarizes the key instrumental concepts that define the performance of these methods, including the choice of imaging optics, detector considerations, and the impact of source time structure at synchrotron light sources and X-ray free-electron lasers (XFELs). We discuss the simultaneous use of complementary imaging modes that are increasingly used in practice. The early demonstrations of the potential of time-resolved DFXM include real-time defect and grain-boundary dynamics during metal annealing, stroboscopic imaging of functional devices with high strain sensitivity, and ultrafast pump-probe implementations at XFELs that directly visualize acoustic-wave propagation and energy dissipation in bulk crystals.

Dark-field X-ray microscopy↗

Extinction and survival in two-species annihilation

In this paper, we study diffusion-controlled two-species annihilation with a finite number of particles. In this stochastic process, particles move diffusively, and when two particles of opposite type come into contact, the two annihilate. We focus on the behavior in three spatial dimensions and for initial conditions where particles are confined to a compact domain. Generally, one species outnumbers the other, and we find that the difference between the number of majority and minority species, which is a conserved quantity, controls the behavior. When the number difference exceeds a critical value, the minority becomes extinct and a finite number of majority particles survive, while below this critical difference, a finite number of particles of both species survive. The critical difference ${\mathrm{{\Delta}}}_{c}$ grows algebraically with the total initial number of particles N, and when $N{\gg}1$, the critical difference scales as ${\mathrm{{\Delta}}}_{c}{\sim}{N}^{1/3}$. Furthermore, when the initial concentrations of the two species are equal, the average number of surviving majority and minority particles ${M}_{+}$ and ${M}_{{-}}$, exhibit two distinct scaling behaviors, ${M}_{+}{\sim}{N}^{1/2}$ and ${M}_{{-}}{\sim}{N}^{1/6}$. Finally, in contrast, when the initial populations are equal, these two quantities are comparable ${M}_{+}{\sim}{M}_{{-}}{\sim}{N}^{1/3}$.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Reduced product yield in chemical processes by second law effects

An analysis of second law effects in chemical processes, where product yield is explicitly related to the individual irreversibilities within the process to indicate a maximum theoretical yield, is presented. Examples are given that indicate differences between first and second law approaches toward process efficiency and process yield. This analysis also expresses production capacity in terms of the heating value of a product. As a result, it is particularly convenient in analyzing fuel conversion plants and their potential for improvement. Relationships are also given for the effects of irreversibilities on requirements for process heat and for feedstocks.

England, C.↗

Unprecedented Fluorophore Photostability Enabled by Low‐Loss Organic Hyperbolic Materials

Abstract The dynamics of photons in fluorescent molecules plays a key role in fluorescence imaging, optical sensing, organic photovoltaics, and displays. Photobleaching is an irreversible photodegradation process of fluorophores, representing a fundamental limitation in relevant optical applications. Chemical reagents are used to suppress the photobleaching rate but with exceptionally high specificity for each type of fluorophore. Here, using organic hyperbolic materials (OHMs), an optical platform to achieve unprecedented fluorophore photostability without any chemical specificity is demonstrated. A more than 500‐fold lengthening of the photobleaching lifetime and a 230‐fold increase in the total emitted photon counts are observed simultaneously. These exceptional improvements solely come from the low‐loss hyperbolic dispersion of OHM films and the large resultant Purcell effect in the visible spectral range. The demonstrated OHM platform may open up a new paradigm in nanophotonics and organic plasmonics for super‐resolution imaging and the engineering of light–matter interactions at the nanoscale.

Lee, Yeon Ui↗

Computational micromechanics of fatigue of microstructures in the HCF–VHCF regimes

Advances in higher resolution experimental techniques have shown that metallic materials can develop fatigue cracks under cyclic loading levels significantly below the yield stress. Indeed, the traditional notion of a fatigue limit can be recast in terms of limits associated with nucleation and arrest of fatigue cracks at the microstructural scale. Though fatigue damage characteristically emerges from irreversible dislocation processes at sub-grain scales, the specific microstructure attributes, environment, and loading conditions can strongly affect the apparent failure mode and surface to subsurface transitions. This paper discusses multiple mechanisms that occur during fatigue loading in the high cycle fatigue (HCF) to very high cycle fatigue (VHCF) regimes. We compare these regimes, focusing on strategies to bridge experimental and modeling approaches exercised at multiple length scales and discussing particular challenges to modeling and simulation regarding microstructure-sensitive fatigue driving forces and thresholds. Finally, we discuss some of the challenges in predicting the transition of failure mechanisms at different stress and strain amplitudes.

36 MATERIALS SCIENCE↗

Diffusion behavior of copper atoms under Cu(II) reduction in Cucurbit[8]uril cavity at elevated temperatures

In this paper we describe copper clusters and nanoparticles formation by the reduction of copper (II) ions inside cavities of macrocycle molecules using supramolecular compound [Cu(Cyclen)(H{sub 2}O)@CB[8]](NO{sub 3}){sub 2}·12H{sub 2}O followed by Cu atoms diffusion between macrocycle CB[8] molecules. To understand the copper cluster genesis and nanoparticles formation x-ray powder diffraction (XRD), electron paramagnetic resonance (EPR), FTIR-spectroscopies, HRTEM and thermal analysis were used. It was found that atomic Cu(0) was not fixed in the cavity under heating, and Cu clusters and nanoparticles were formed by heating of supramolecular compound powder at 200–340 °C in He, but more preferably in H{sub 2}. The process was partially reversible after heating the powder up to 300 °C for 15 min and air exposure for a few months. The process was irreversible after heating of the sample at temperatures higher than 340 °C due to CB[8] cavitand decomposition. In general, exposure of the samples to air leads to oxidation and hydration clusters of Cu. Nanoparticles up to 600 nm in size formed on the surface of agglomerated polycrystalline powder at temperatures lower than 200 °C. The clusters less than 7 nm and 40 nm in size were formed at 300 °C inside and outside agglomerating polycrystalline powder, respectively. The diffusion coefficient of copper atoms inside polycrystalline CB[8] agglomerates equal to 10{sup −10} cm{sup 2}/s by heating the samples at 300 °C was found. - Graphical abstract: Copper nanoparticles and clusters are formed by the reduction of copper (II) ions inside cavities of macrocycle molecules at 200–340 °C in He, but more preferably in H{sub 2} using supramolecular compound [Cu(Cyclen)(H{sub 2}O)@CB[8]](NO{sub 3}){sub 2}·12H{sub 2}O followed by Cu atoms diffusion between macrocycle CB[8] molecules. Nanoparticles up to 600 nm in size formed on the surface of agglomerated polycrystalline powder at temperatures lower than 200 °C. The clusters less than 7 nm and 40 nm in size were formed at 300 °C inside and outside agglomerating polycrystalline powder, respectively. - Highlights: • We considered Cu NP's formation at CuCyclen thermolysis in H{sub 2} and He. • Initial complex CuCyclen was located inside cavitand CB[8]. • Cu(0) reduced in cavities diffuse between CB[8] molecules and Cu nuclei appear. • NPs less than 7 and 50 nm were formed inside and outside the CB[8] powder. • Coefficient of Cu(O) diffusion is 10{sup −10} cm{sup 2}/s for temperature at 300 °C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Lectures on statistical mechanics

Presented here is a transcription of the lecture notes from Professor Allan N. Kaufman’s graduate statistical mechanics course Physics 212A and 212B at the University of California Berkeley from the 1972–1973 academic year. 212A addressed equilibrium statistical mechanics with topics: fundamentals (micro-canonical and sub-canonical ensembles, adiabatic law and action conservation, fluctuations, pressure, and virial theorem), classical fluids and other systems (equation of state, deviations from ideality, virial coefficients and van der Waals potential, canonical ensemble and partition function, quasistatic evolution, grand-canonical ensemble and partition function, chemical potential, simple model of a phase transition, quantum virial expansion, numerical simulation of equations of state, and phase transition), chemical equilibrium (systems with multiple species and chemical reactions, law of mass action, Saha equation, chemical equilibrium including ionization and excited states), and long-range interactions (including Coulomb, dipole, and gravitational interactions, Debye–Hückel theory, and shielding). 212B addressed nonequilibrium statistical mechanics with topics: fundamentals (definitions: realizations, moments, characteristic function, and discrete variables), Brownian motion (Langevin equation, fluctuation–dissipation theorem, spatial diffusion, Boltzmann’s H-theorem), Liouville and Klimontovich equations, Landau equation (derivation, elaboration, and H-theorem, and irreversibility), Markov processes and Fokker–Planck equation (derivations of the Fokker–Planck equation and a master equation), linear response and transport theory (linear Boltzmann equation, linear response theory of Kubo and Mori, relation of entropy production to electrical conductivity, transport relations and coefficients, normal mode solutions of the transport equations, sketch of a generalized Langevin equation method for transport theory), and an introduction to nonequilibrium quantum statistical mechanics.

plasma dynamics↗

Unravelling Solid-State Redox Chemistry in Li 1.3 Nb 0.3 Mn 0.4 O 2 Single-Crystal Cathode Material

Recent reports on high capacities delivered by Li-excess transition-metal oxide cathodes have triggered intense interest in utilizing reversible oxygen redox for high-energy battery applications. To control oxygen electrochemical activities, fundamental understanding of redox chemistry is essential yet has so far proven challenging. In the present study, micrometer-sized Li 1.3 Nb 0.3 Mn 0.4 O 2 single crystals were synthesized for the first time and used as a platform to understand the charge compensation mechanism during Li extraction and insertion. We explicitly demonstrate that the oxidation of O 2- to O n - (0 < n < 2) and O 2 loss from the lattice dominates at 4.5 and 4.7 V, respectively. While both processes occur in the first cycle, only the redox of O 2- /O n - participates in the following cycles. The lattice anion redox process triggers irreversible changes in Mn redox, which likely causes the voltage and capacity fade observed on this oxide. Two drastically different redox activity regions, a single-phase behavior involving only Mn 3+/4+ and a two-phase behavior involving O 2- /O n - (0 ≤ n < 2), were found in Li x Nb 0.3 Mn 0.4 O 2 (0 < x < 1.3). Morphological damage with particle cracking and fracturing was broadly observed when O redox is active, revealing additional challenges in utilizing O redox for high-energy cathode development.

25 ENERGY STORAGE↗

Uncovering the Relationship between Aging and Cycling on Lithium Metal Battery Self-Discharge

Lithium metal is considered the “holy grail” material to replace typical Li-ion anodes due to the absence of a host structure coupled with a high theoretical capacity. The absence of a host structure results in large volumetric changes when lithium is electrodeposited/dissolved, making the lithium prone to stranding and parasitic reactions with the electrolyte. Lithium research is focused on enabling highly reversible lithium electrodeposition/dissolution, which is important to achieving long cycle life. Understanding the various mechanisms of self-discharge is also critical for realizing practical lithium metal batteries but is often overlooked. In contrast to previous work, it is shown here that self-discharge via galvanic corrosion is negligible, particularly when lithium is cycled to relevant capacities. Rather, the continued electrochemical cycling of lithium metal results in self-discharge when periodic rest is applied during cycling. The extent of self-discharge can be controlled by increasing the capacity of plated lithium, tuning electrolyte chemistry, incorporating regular rest, or introducing lithiophilic materials. Finally, the Coulombic losses that occur during periodic rest are largely reversible, suggesting that the dominant self-discharge mechanism in this work is not an irreversible chemical process but rather a morphological process.

25 ENERGY STORAGE↗

Long Excited-State Lifetimes in Three-Coordinate Copper(I) Complexes via Triplet–Triplet Energy Transfer to Pyrene-Decorated Isocyanides

There has been much effort to improve excited-state lifetimes in photosensitizers based on earth-abundant first-row transition metals. Copper(I) complexes have gained significant attention in this field, and in most cases, sterically driven approaches are used to optimize their lifetimes. This study presents a series of three-coordinate copper(I) complexes (Cu1–Cu3) where the excited-state lifetime is extended by triplet–triplet energy transfer. The heteroleptic compounds feature a cyclohexyl-substituted β-diketiminate (CyNacNac Me ) paired with aryl isocyanide ligands, giving the general formula Cu(CyNacNac Me )(CN-Ar) (CN-dmp = 2,6-dimethylphenyl isocyanide for Cu1; CN-pyr = 1-pyrenyl isocyanide for Cu2; CN-dmp-pyr = 2,6-dimethyl-4-(1-pyrenyl)phenyl isocyanide for Cu3). The nature, energies, and dynamics of the low-energy triplet excited states are assessed with a combination of photoluminescence measurements at room temperature and 77 K, ultrafast transient absorption (UFTA) spectroscopy, and DFT calculations. The complexes with the pyrene-decorated isocyanides (Cu2 and Cu3) exhibit extended excited-state lifetimes resulting from triplet–triplet energy transfer (TTET) between the short-lived charge-transfer excited state ( 3 CT) and the long-lived pyrene-centered triplet state ( 3 pyr). This TTET process is irreversible in Cu3, producing exclusively the 3 pyr state, and in Cu2, the 3 CT and 3 pyr states are nearly isoenergetic, enabling reversible TTET and long-lived 3 CT luminescence. The improved photophysical properties in Cu2 and Cu3 result in improvements in activity for both photocatalytic stilbene E/Z isomerization via triplet energy transfer and photoredox transformations involving hydrodebromination and C–O bond activation. Furthermore, these results illustrate that the extended excited-state lifetimes achieved through TTET result in newly conceived photosynthetically relevant earth-abundant transition metal complexes.

14 SOLAR ENERGY↗