Search NASA⌕ Search

SEARCH · Search NASA

Results for “isotope effect”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Effect of He seeding on hydrogen isotope permeation in tungsten by H-D mixed plasma exposure

Hydrogen (H) and deuterium (D) permeation fluxes for tungsten (W) by H-D mixed plasma were studied to clarify the hydrogen isotope effect on permeation by a newly designed plasma driven permeation (PDP) device at Shizuoka University. A mixed H-D plasma was produced by introducing H and D gasses with various ratios. The atomic ratio and permeation flux in the plasma were measured during the experiments. It was found that the H:D atomic ratio in the plasma was almost proportional to the introduced H:D gas ratio. When single species of H or D was irradiated, the H permeation rate showed approximately 1.6 times as high as that of D. Under H-D mixed plasma irradiation, the highest HD permeation rate was observed when the atomic ratio of H:D in the plasma was 50:50. In addition, the effect of He seeding on H-D mixed plasma driven permeation behavior was also evaluated. The recycling of hydrogen isotopes on the upstream side was enhanced due to the formation of He bubbles near the surface, which would prevent the dissolution of hydrogen isotopes into bulk W and enhance the reflection process during plasma exposure. H and D permeation fluxes were clearly reduced by seeding He in H-D mixed plasma. At lower temperature (~723 K), the ratio of steady permeation fluxes of H and D was about 75 : 25, confirming the high permeation flux of H . These results have demonstrated a significant hydrogen isotope effect, even if He was seeded or not. As the temperature increased, H and D permeation fluxes approached unity at 923 K. Therefore,this indicates that the hydrogen isotope effect was determined by the combination of recycling / reflection at or beneath the surface, which will be controlled by the temperature during plasma exposure.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1987

Along-strike magma mixing beneath mid-ocean ridges - Effects on isotopic ratios

The effects of mixing processes on the isotopic variability of midocean ridge basalts are studied. The processes considered are porous flow dispersion and convective mixing in magma chambers. Porous flow dispersion is capable of mixing magmas over distances of only a few tens of meters. Convective mixing, on the other hand, is found to produce continuous magma chambers, where mixing is limited by convective processes, and for discontinuous chambers, where mixing is limited by chamber size. Preliminary comparison of the calculations with observations along the midocean ridges shows that the calculations are consistent with the existence of a correlation between bathymetry and isotopic ratio at long, but not at short, wavelengths. They are also capable of explaining a decrease in isotopic variability with increasing spreading rate.

Kenyon, P. M.↗
NASA NTRSDate not supplied

Constraints on triple oxygen isotope kinetics

Triple oxygen isotope measurements have been used as tracers for classifying meteorites, as indicators of atmospheric chemistry and as a proxy for primary productivity among other uses. These utilities rely on the mass dependency of most chemical reactions: δ17O is proportional to δ18O by roughly a factor of 0.5. However,in detail it is known that mass-dependency factorsvary. Constraints on mass dependency are well established for equilibrium isotope effects, but similar constraints for kinetic isotope effects are lacking.Here, we provide constraints for isotope effects generated by unidirectional chemical reactions (i.e. kinetic isotope effects, KIEs). A simplified Monte Carlo model is used to estimatethe range of kinetic isotope effects. It is found that the range of KIEs exceeds the range of equilibrium isotope effects such that some mass dependent kinetic isotope effects could be mistaken for being mass-independent. For the16O-17O-18O system,Δ′17Ovariations as large 0.8‰ can be generated from a single reaction step. Two case studies from published literature, on the thermal decomposition of calcite (CaCO3) and brucite (Mg(OH)2), are used to test the extreme limits of the modeled results. Isotope fractionationsgenerated fromdensity functional theory models of the surface reaction steps are shownto match the published data. The fractionation models are strictly mass dependent thus this result suggests thermal decomposition of calcite is also mass dependent. Although oxygen is the focus here, our approach applies to any system with more than two isotopes.

J. A. Hayles↗
NASA NTRSDate not supplied

Constraints on Triple Oxygen Isotope Kinetics

Triple oxygen isotope methods (e.g., using δ 18 O, and Δ′ 17 O) have been used to classify meteorites, to constrain atmospheric chemistry, and to estimate primary productivity, among other uses. Such utility relies on the mass dependency of most chemical reactions: δ 17 O is proportional to δ 18 O by roughly a factor of 0.5. However, in detail, mass-dependency factors vary. While constraints on mass dependency are well established for equilibrium isotope effects, similar constraints for kinetic isotope effects are lacking. Using an ab initio Monte Carlo approach (see envelopes in Figure 1), we find the range of kinetic isotope effects (i.e., resulting from unidirectional chemical reactions) contains and exceeds the range of accessible equilibrium isotope effects for the 16 O 17 O 18 O system (Hayles and Killingsworth, 2022). Accessible kinetic isotope effects can yield Δ′ 17 O variations as large 0.8 ‰ from a single kinetic fractionation step. Reactions that yield the largest deviations from equilibrium are those with the largest molecular mass difference between decomposition fragments, typically the two products such as a gas and solid generated from the thermal decomposition of an initial solid. Comparison of DFT transition state model results against previously published experiments on the thermal decomposition of calcite (CaCO 3 ) (Miller et al., 2002) and dehydroxylation of brucite (Mg(OH) 2 ) (Clayton and Mayeda, 2009) show they are matched with mass-dependent kinetic isotope effects. This approach can be applied to any system with more than two isotopes.

Oxygen isotopes↗
NASA NTRS2021

Constraints on Triple Oxygen Isotope Kinetics

Isotopic disequilibrium is not as well constrained as equilibrium, hindering interpretation of isotopic variations. Kinetic isotope effects, a subset of disequilibrium, are common in nature and have been assumed to be distinct from equilibrium and mass independent isotope effects based on underdeveloped criteria. Using basic physical principles, we provide needed mechanistic constraints on mass-dependent kinetic isotope effects for the triple oxygen isotope system. We find some kinetic isotope effects yield large isotopic variations, exceeding equilibrium, which could be mistaken for mass independent relationships. Meanwhile, other kinetic isotope effects are found to have triple oxygen isotope relationships that could be mistaken for equilibrium isotope effects. Comparison against prior case studies of thermal decomposition of calcite (CaCO3) and brucite (Mg(OH)2) further tests our results. Although oxygen is the focus here, our approach applies to any system with more than two isotopes.

Isotope Geochemistry↗
NASA NTRSDate not supplied

Constraints on triple oxygen isotope kinetics

The general assumption that systems are in equilibrium is convenient, but imperfect. Instead, the partial or full expression of kinetic reaction steps may need to be determined. Using an isotope fractionation Monte-Carlo model under the harmonic approximation (Figure 1 envelopes), we find the range of kinetic isotope effects (i.e., resulting from unidirectional chemical reactions) contains and exceeds the range of accessible equilibrium isotope effects. For the 16O-17O-18O system, accessible kinetic isotope effects can yield Δ′17O variations as large 0.8‰ from a single kinetic fractionation step. Reactions that yield the largest deviations from equilibrium are those with the largest molecular mass difference between decomposition fragments, typically the two products, such as a gas and solid generated from the thermal decomposition of an initial solid. For example, previously published experiments on the thermal decomposition of calcite (CaCO3) and dehydroxylation of brucite (Mg(OH)2) are matched by density functional theory models of each kinetic isotope effect, thus revealing their origin in mass-dependent reaction. Beyond oxygen, our approach applies to any system with more than two isotopes.

Oxygen isotopes↗
DOE OSTI2025

Stable isotope equilibria in the dihydrogen-water-methane-ethane-propane system. Part 1: Path-integral calculations with CCSD(T) quality potentials

Isotopic compositions of alkanes are typically assumed to be kinetically controlled, but recently is has been proposed that alkanes can isotopically equilibrate for both C and H isotopes during natural gas generation. Evaluation of this requires knowledge of the isotopic equilibrium between alkanes and other common hydrogen and carbon bearing species. Here, in this study, we calculate isotopic equilibria within and between gaseous dihydrogen (H 2 ), water (H 2 O), methane (CH 4 ), ethane (C 2 H 6 ) and propane (C 3 H 8 ), including isotope fractionation among molecules, clumped isotope effects, as well as among sites of propane (i.e., the site-specific isotope effects) from 0°C to 500°C using a path-integral method paired with high-level descriptions of molecular potentials and the diagonal correction to the Born Oppenheimer approximation. While path-integral calculations with high- level CCSD(T) potentials are available for the isotopic equilibria involving methane, the path-integral calculations for ethane and propane have only been performed based on lower-level descriptions of the molecular potentials. We analyze the relative importance of various approximations that are commonly employed when isotopic equilibria are evaluated. We find that clumped isotope effects can be calculated to the same accuracy using computationally inexpensive combination of the Bigeleisen-Mayer-Urey model with the molecular potential from density functional theory. In contrast, fractionation and site preferences of both deuterium and carbon-13 benefit from the use of the higher level CCSD(T) potentials and accounting for anharmonic effects. Additionally, for fractionation and site preference of deuterium corrections to Born-Oppenheimer approximation can also be important.

03 NATURAL GAS↗
DOE OSTI2021

Insertion products in the reaction of carbonyl oxide Criegee intermediates with acids: Chloro(hydroperoxy)methane formation from reaction of CH 2 OO with HCl and DCl

The reactions of carbonyl oxides (“Criegee intermediates”) with organic and inorganic acids have been postulated to proceed predominantly by an insertion mechanism, and the hydroperoxy-substituted ester products from reactions with organic acids have been spectroscopically observed. Here this work characterizes the products from one of the simplest reactions of carbonyl oxides with inorganic acids, that of formaldehyde oxide, CH 2 OO, with hydrogen chloride, which occurs via a 1,2-insertion in the H–Cl bond. Reactions of both HCl and DCl isotopologues yield product signal at the mass of the insertion product chloro(hydroperoxy)methane and a dissociative ionisation peak at the mass of the protonated (or deuteronated) Criegee intermediate. The isotopic composition of the insertion product has been measured for reaction mixtures where both HCl isotopologues are present, and the H/D ratio of the product is consistently higher (by a factor of 1.6 ± 0.3) than that of the reactants. This isotope selectivity in the products has smaller uncertainty than the ratio of measured rate coefficients and suggests a normal (k H > k D ) kinetic isotope effect in the reaction. Theoretical kinetics calculations predict a small normal kinetic isotope effect for the overall reaction (k H / k D = 1.35 at 20 Torr N 2 and k H / k D = 1.2 for 1 atm N 2 ) but predict a substantial inverse kinetic isotope effect (k D > k H ) for the stabilisation fraction, in disagreement with the experimental observation.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2021

Isotopic dependence of the frequency of optical vibrations in molybdenum monohydride

We show that it is currently known that three hydrides – PdH x , MoH x , and TiH x – exhibit an inverse isotope effect in superconductivity. Namely, the phase with a heavier hydrogen isotope, deuterium, has a higher critical temperature. Hydrides and deuterides of palladium have intensively been studied both experimentally and theoretically, but the origin of the isotope effect has not been established with certainty. The commonly accepted explanation is that the effect is likely to be due to the strong anharmonicity of the optical hydrogen vibrations, which was considered to be responsible for the large deviation of the ratio of the fundamental optical frequencies ω H /ω D = 1.51 from the harmonic value $\sqrt{2}$ ≈ 1.41. In the present paper, powder samples of MoH 1.1(1) and MoD 1.07(3) were synthesized under a hydrogen / deuterium pressure of several gigapascals and studied by inelastic neutron scattering (INS) at ambient pressure and T = 10 K. The INS study demonstrated that optical vibrations of H atoms in MoH 1.1 and D atoms in MoD 1.07 are harmonic and the ratio of fundamental optical frequencies ω H /ω D = 1.44 is close to the harmonic value $\sqrt{2}$ ≈ 1.41. This shows that anharmonicity is not a necessary condition for the presence of the inverse isotope effect. The MoD 1.07 sample was additionally studied by neutron diffraction (ND) at ambient pressure and T = 100 K. In agreement with previous ND results for MoH 1.2 , the ND study of MoD 1.07 showed that deuterium atoms occupied almost all octahedral interstitial sites in its hexagonal close-packed metal lattice and formed a NiAs-type crystal structure with the composition close to MoD. The overstoichiometric composition MoD 1.07 of the deuteride is likely to result from a small fraction D/Mo ~ 0.07 of deuterium atoms partially occupying the tetrahedral interstices.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Lithium's low-temperature phase transitions: Insights into quantum lattice dynamics and superconductivity

The large lattice dynamics of lithium, driven by its low atomic mass, results in energetically similar structures and significant isotope effects under pressure, posing challenges to current theoretical models. Above 20 GPa and at low temperatures, lithium's electronic properties deviate from simple metallic behavior, with superconductivity emerging in a complex, pressure-dependent manner, alongside an unusual isotope effect. The structural phases of 7 Li reported under these conditions are inconsistent across studies, and the structures of 6 Li remain unexamined. These gaps limit our understanding of the effects of pressure on lithium's electronic properties and the role of quantum lattice effects on its structural behavior under pressure. Here, we integrate experimental and theoretical approaches to investigate the low-temperature structural phase boundaries in lithium isotopes. We map the structural phase diagram of 7 Li from 5 to 55 GPa and 15–75 K, identifying the sequence fcc → ℎ⁡R⁢1 → cI16. A pronounced isotope effect is observed, with 6 Li shifting the fcc → ℎ⁡R⁢1 phase boundary to lower pressures at 15 K. Density functional theory calculations further clarify how these structural changes affect superconducting properties, particularly emphasizing the role of the fcc → ℎ⁡R⁢1 transition in lithium's superconductivity. Furthermore, our findings offer insights into the unique behavior of lithium isotopes under pressure.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Isotope-dependent Tafel analysis probes proton transfer kinetics during electrocatalytic water splitting

Proton transfer plays an important role in both hydrogen and oxygen evolution reactions during electrocatalytic water splitting to produce green hydrogen. However, directly adapting the conventional proton/deuterium kinetic isotope effect to study proton transfer in heterogeneous electrocatalytic processes is challenging. Here we propose using the shift in the Tafel slope between protic and deuteric electrolytes, or the Tafel slope isotope effect, as an effective probe of proton transfer characteristics. Comparison of the Tafel slope isotope effect for diverse hydrogen and oxygen evolution reaction electrocatalysts in different pH environments reveals that proton transfer is both pH and structure dependent. Using ruthenium oxide as an example, we show that local structure modification can change the rate-determining step from an electrochemical, concerted proton–electron transfer step to a chemical step and improve the oxygen evolution activity in acid. The isotope-dependent Tafel analysis will facilitate a better understanding of the proton transfer behaviours during electrocatalytic processes and provide guidance for designing efficient electrocatalysts.

Chemistry↗
NASA NTRS1990

Laboratory studies of heavy ozone

Dissociation of ozone in the Chappuis bands has been used as an O atom source to study isotope effects occurring in the O(3P) + O2(3 Sigma g) recombination reaction. The ozone produced was found to be enriched in both of its heavy isotopes. The pressure dependence (5-1000 torr) and temperature dependence (127-360 K) of this isotope effect have been investigated. The enrichment is approximately constant from 5 torr to 100 torr and decreases at higher pressures. It increases with temperature, with O3-50 showing a slightly faster rate of increase than O3-45. The results of this experiment have clearly isolated the source of the isotope effect to the gas phase O(3P) + O2(3 Sigma g) recombination reaction.

Morton, J.↗
NASA NTRS1976

Electron detachment from negative ions - The effects of isotopic substitution

Absolute total electron-detachment cross sections and relative elastic-scattering cross sections are presented for collisions of H(-) or D(-) with He, Ne, Ar, and N2 for collision energies ranging from about 2 eV up to 100 eV. Special emphasis has been given to the effect of isotopic substitution. It was found that, with the exception of the helium target, the results cannot be in accord with a model using a localized complex potential. On the other hand, the results for H(-) or D(-) with He are in excellent agreement with predictions based on previous (local complex potential) analysis of differential elastic-scattering measurements.

Champion, R. L.↗
NASA NTRS1981

Possible isotopic fractionation effects in material sputtered from minerals

A model is presented which predicts isotope fractionation in material sputtered from mineral surfaces. According to the model, the fractionation is a function of the fractional abundances of each isotope, the low-energy collision cross sections and the atomic masses, and the fractionation pattern can be nonlinear. Calculations are illustrated for all sets of isotopes in the minerals perovskite, anorthite, akermanite, enstatite and troilite, and it is found that while O is always positively fractionated, with heavier isotopes sputtered preferentially, heavier elements are generally negatively fractionated. It is noted that the model may be tested by experiments on a system such as CaF2, CaI2, in which the Ca sputtered from CaF2 is predicted to be strongly fractionated in a negative sense and that sputtered from CaI2 is predicted to be strongly fractionated in a positive sense.

Haff, P. K.↗
DOE OSTI2024

Non-linear dependence of ion heat flux on plasma density at the L–H transition of JET NBI-heated deuterium–tritium plasmas

Abstract Recent JET D–T campaigns opened the possibility of unique isotope studies to investigate the L–H transition physics in view of reactor plasmas and to study the origin of the observed power threshold minimum. In the present paper, we characterise L–H transitions in the low and high-density branches of JET NBI-heated D–T plasmas. As discussed in the paper, L–H transition has been hypothesised to be determined by the transport power losses of plasma ions, i.e. the so-called ion heat flux ( Q i ). We present the first power balance analysis of JET NBI-heated D–T plasmas to evaluate the ion heat flux at the transition. Due to the experimental setting being similar to previous JET D experiments, we also directly compare the results, discussing the isotope effect and similarities between datasets. First, we find an isotope effect between D and D–T Q i , with a lower Q i in D–T plasmas. We confirm that the ion heat flux deviates from density linearity compared to the linear trend observed in wave-heated D plasmas of other tokamaks. The deviation we observe in NBI-heated L–H transitions happens at an isotope-dependent density. Plasma edge rotation correlates with Q i deviation from density linearity in the low-density branch. However, further investigations would be required to assess the role of rotation on Q i and the power threshold minimum at JET. At low plasma density, NBI power dominates Q i , while increasing the density makes the equipartition power dominant. We finally compare our results with hypotheses proposed from evidence in other tokamaks to present a complete overview of ion heat flux analyses in D and D–T NBI-heated plasmas at JET.

Vincenzi, P. (ORCID:0000000251564354)↗
NASA NTRS1980

Possible isotopic fractionation effects in sputtered minerals

A model which makes definite predictions for the fractionation of isotopes in sputtered material is discussed. The fractionation patterns are nonlinear, and the pattern for a particular set of isotopes depends on the chemical matrix within which those isotopes are contained. Calculations are presented for all nonmonoisotopic elements contained in the minerals perovskite, anorthite, ackermanite, enstatite, and troilite. All isotopes are fractionated at the level of approximately 4-6 deg/o per atomic mass unit. Oxygen is always positively fractionated (heavier isotopes sputtered preferentially), and heavier elements are generally negatively fractioned (light isotopes sputtered preferentially). The value of Delta (O-18:O-16) is always less by about 1.8 deg/o than a linear extrapolation based upon the calculated delta (O-17:O-16) value would suggest. The phenomenon of both negative and positive fractionation patterns from a single target mineral are used to make an experimental test of the proposed model.

Haff, P. K.↗
NASA NTRS1986

Stable carbon isotope ratios in atmospheric methane and some of its sources

Ratios of C-13/C-12 have been measured in atmospheric methane and in methane collected from sites and biota that represent potentially large sources of atmospheric methane. These include temperate marshes (about -48 percent to about -54 percent), landfills (about -51 percent to about -55 percent), and the first reported values for any species of termite (-72.8 + or - 3.1 percent for Reticulitermes tibialis and -57.3 + or - 1.6 percent for Zootermopsis angusticollis). Numbers in parentheses are delta C-13 values with respect to PDB (Peedee belemnite) carbonate. Most methane sources reported thus far are depleted in C-13 with respect to atmospheric methane (-47.0 + or - 0.3 percent). Individual sources of methane should have C-13/C-12 ratios characteristic of mechanisms of CH4 formation and consumption prior to release to the atmosphere. The mass-weighted average isotopic composition of all sources should equal the mean C-13 of atmospheric methane, corrected for a kinetic isotope effect in the OH attack of CH4. Assuming the kinetic isotope effect to be small (about -3.0 percent correction to -47.0), as in the literature, the new values given here for termite methane do not help to explain the apparent discrepancy between C-13/C-12 ratios of the known CH4 sources and that of atmospheric CH4.

Tyler, Stanley C.↗