Search NASA⌕ Search

SEARCH · Search NASA

Results for “isotope labeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Amplitude-mode spectroscopy of chemically injected and photogenerated charge carriers in semiconducting single-walled carbon nanotubes

In one-dimensional semiconductors such as conjugated polymers and semiconducting single-walled carbon nanotubes (s-SWCNTs), injected charge carriers (electrons or holes) can have profound impacts on both electronic conductivity and optical spectra, even at low carrier densities. Understanding charge-related spectral features is a key fundamental challenge with important technological implications. Here, we employ a systematic suite of experimental and theoretical tools to understand the mid-infrared charge signatures of heavily p-type doped polymer-wrapped s-SWCNTs. Across a broad range of nanotube diameters, we find that hole charge carriers induce strong Fano anti-resonances in mid-infrared transmission spectra that correspond to defect-related (D-band) and in-plane tangential (G-band) Raman-active vibrational modes, along with anti-resonances arising from infrared (IR)-active polymer and SWCNT modes. We employ 13C isotope-labeled s-SWCNTs and a removable wrapping polymer to clarify the relative intensities, energies, and sources of all observed anti-resonances. Simulations performed with the "amplitude mode model" are used to quantitatively reproduce Raman spectra and also help to explain the outsized intensity of the D-band anti-resonance, relative to the G-band, observed for both moderately and degenerately doped s-SWCNTs. Here, the results provide a framework for future studies of ground- and excited-state charge carriers in s-SWCNTs and a variety of low-dimensional materials.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Elucidating non-radiative decay in near-infrared lumiphores: Leveraging new design principles to develop a telecom band organic dye laser

Organic near-infrared (NIR) lumiphores have been targeted for biological and technological applications; however, these dyes exhibit exponentially decreasing quantum yields with decreasing energy gaps. The accepted model of this phenomenon invokes C–H stretching modes as the dominant route of non-radiative energy dissipation. Reducing the number of these modes is a popular strategy for the design of bright NIR lumiphores, but quantitative experimental validation of this strategy is lacking. Here, we evaluate the role of C–H modes in non-radiative relaxation through isotopic labeling of a NIR-emitting complex. Measurements comparing relaxation between protonated and perdeuterated complexes indicate that C–H modes do not contribute significantly to non-radiative relaxation. We instead propose that skeletal modes may play a larger role and suggest that minimizing scaffold size is a promising route for bright NIR lumiphores. In conclusion, we demonstrate the promise of such strategies through the development of the reddest organic-based laser dye yet reported.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Role of nitrogen in the high-temperature oxidation of titanium alloys

Here, we characterized the oxidation of pure Ti, Ti-0.8Si, and Ti-2Nb at 800 °C in N 2 -20% O 2 and in sequential isotopically labeled N 2 -20% O 2 atmospheres to clarify how nitrogen influences the high-temperature oxidation mechanisms of titanium alloys. The alloys always exhibited a nitride layer beneath a compact oxide scale with localized nitrogen concentrations in the underlying metal. Nitrogen is found to limit the oxygen concentrations in the metal. The synergy between alloying and nitrogen helps maintain compact oxide scales, preventing the formation of the lamellar scales observed during oxidation in nitrogen-free atmosphere and the oxidation of pure Ti regardless of the atmosphere.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Recombinant expression of computationally designed peptide-bundlemers in Escherichia coli

Computational design of fully artificial peptides is extensively researched by material scientists and engineers for the construction of novel nanostructures and biomaterials. Such design has yielded a peptide-based building block or bundlemer, a coiled coil peptide assembly that undergoes further physical-covalent interactions to form 1D, 2D and, potentially, 3D hierarchical assemblies and displays targeted and biomimetic material properties. Recombinant expression is a convenient, flexible tool to synthesize such artificial and modified peptides in large quantities while also enabling economical synthesis of isotopically labeled peptides and longer protein-like artificial peptides. This report describes the protocol for recombinant expression of a 31-amino acid, computationally designed bundlemer-forming peptide in Escherichia coli. Peptide yields of 10 mgs per liter of media were achieved which highlights complementary advantages of recombinant expression technique relative to conventional laboratory-scale synthesis, such as solid-phase peptide synthesis.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Quantification of active sites in yttrium containing dealuminated Beta zeolites during conversion of ethanol and acetaldehyde to butadiene

Here, in this work, yttrium containing dealuminated Beta zeolites (Y/deAlBeta) were synthesized and characterized by various spectroscopic techniques to improve understanding of ethanol upgrading over these materials. Characterization results indicate yttrium atoms partially condense with framework silanol nests formed during dealumination of parent Al-Beta supports. Active sites for conversion of ethanol and acetaldehyde to butadiene were quantified on a series of Y/deAlBeta catalysts (0.1–10 wt% yttrium) via ex situ chemisorption and transmission Fourier transformed infrared (FTIR) spectroscopy measurements by first measuring the integrated molar extinction coefficient (IMEC) for pyridine bound to Lewis acidic yttrium sites. In situ titrations with pyridine demonstrate that the number of sites quantified by ex situ chemisorption IR is quantitatively similar to the number of sites that catalyze butadiene formation, which varies (from 0.05 to 0.35) across the series of catalysts. In situ pyridine titrations impact butadiene site time yields (STY), but not crotonaldehyde STY, indicating that a distribution of yttrium sites is present, and that discrete yttrium site types participate in distinct steps in the pathway from ethanol to butadiene. Apparent kinetic parameters including activation energies and reaction orders were measured, these suggest differences in reactant (or reactant-derived intermediate) surface coverages result in higher STYs (per mol Y or per Lewis acidic Y site) for samples with low Y loadings relative to those with higher Y loadings. Isotopic labeling experiments evince the existence of other kinetically relevant steps in addition to the crotonaldehyde transformation to crotyl alcohol. Together, these findings provide further guidance into the heterogeneities in site structures in yttrium-containing zeolites and their relevance for the various steps in the pathway from ethanol to C 4 products useful for production of sustainable aviation fuel and renewable butadiene.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Elucidating the role of surface species in CO oxidation catalyzed by boron nitride nanotube supported transition metal oxides

Boron nitride nanotube (BNNT) is considered a highly promising catalyst support due to its outstanding thermal stability and chemical inertness. These characteristics make BNNT an attractive alternative for high-temperature applications. However, most studies to date have focused on incorporating platinum group metals (PGMs) to achieve high activity. Although BNNT-supported PGM catalysts are highly effective, their scarcity and high cost hinder widespread use in industrial processes. In this study, BNNT-supported transition metal oxides (TMO x /BNNT; TM = Fe, Co, Ni, and Cu) catalysts were investigated, and CO oxidation was applied as a model reaction to evaluate their catalytic performance. Several characterization techniques, including SEM-EDX, TEM, SXRD, H 2 -TPR, and XPS, were employed to examine their physicochemical properties. Notably, the particle size of the metal oxides differed significantly depending on the metal type. This variation is primarily attributed to the inherent metal–support interactions and the thermodynamic stability of each oxide during synthesis. These properties also affected catalytic activity, and various parameters, such as oxygen mobility and redox behavior, played important roles in determining performance. Finally, in situ DRIFTS, CO-TPSR, reaction-order analysis, and 18 O 2 isotope-labeling experiment were used to investigate the reaction mechanism. In conclusion, the findings provide insights into the design of cost-effective BNNT-supported catalysts and highlight their potential applicability in oxidation reactions.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Double echo symmetry-based REDOR and RESPDOR pulse sequences for proton detected measurements of heteronuclear dipolar coupling constants

1 H{X} symmetry-based rotational echo double resonance pulse sequences (S-REDOR) and symmetry-based rotational echo saturation pulse double resonance (S-RESPDOR) solid-state NMR experiments have found widespread application for 1 H detected measurements of difference NMR spectra, dipolar coupling constants, and internuclear distances under conditions of fast magic angle spinning (MAS). In these experiments the supercycled $\text{R4}^2_1 (\text{SR4}^2_1)$ symmetry-based recoupling pulse sequence is typically applied to the 1 H spins to reintroduce heteronuclear dipolar couplings. However, the timing of $\text{SR4}^2_1$ and other symmetry-based pulse sequences must be precisely synchronized with the rotation of the sample, otherwise, the evolution of 1 H CSA and other interactions will not be properly refocused. For this reason, significant distortions are often observed in experimental dipolar dephasing difference curves obtained with S-REDOR or S-RESPDOR pulse sequences. Here we introduce a family of double echo (DE) S-REDOR/S-RESPDOR pulse sequences that function in an analogous manner to the recently introduced $t_1$-noise eliminated (TONE) family of dipolar heteronuclear multiple quantum coherence (D-HMQC) pulse sequences. Through numerical simulations and experiments the DE S-REDOR/S-RESPDOR sequences are shown to provide dephasing difference curves similar to those obtained with S-REDOR/S-RESPDOR. However, the DE sequences are more robust to the deviations of the MAS frequency from the ideal value that occurs during typical solid-state NMR experiments. In this work, the DE sequences are shown to provide more reliable 1 H detected dipolar dephasing difference curves for nuclei such as 15 N (with isotopic labelling), 183 W and 35 Cl. The double echo sequences are therefore recommended to be used in place of conventional S-REDOR/S-RESPDOR sequences for measurement of weak dipolar coupling constants and long-range distances.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Proton-detected 15 N- 1 H dipolar coupling/ 1 H chemical shift correlation experiment for the measurement of NH distances in biological solids under fast MAS solid-state NMR

Measurement of distances from dipolar couplings is essential for structural characterization, refinement and validation using the solid-state nuclear magnetic resonance (ssNMR) spectroscopy. Particularly, knowledge about NH dipolar interactions in biological solids is important for understanding the hydrogen (H)-bonding interactions, molecular geometry and spin dynamics. In this regard, we have proposed a proton-detected two-dimensional (2D) 15 N- 1 H dipolar coupling/ 1 H chemical shift correlation experiment using the C-symmetry based windowless recoupling of chemical shift anisotropy (ROCSA) in combination with the DIPSHIFT pulse-based method for the measurement of short NH distances in the isotopically labeled and naturally abundant biological solids at fast magic angle spinning (MAS) rates (40–70 kHz). Our proposed method results in undistorted recoupled 15 N- 1 H dipolar coupling powder lineshapes that are free from the recoupled 1 H CSA contributions under the 15 N evolution, a feature that is essential for the measurement of NH distances with improved accuracy (± 500 Hz in terms of the NH dipolar couplings). The pulse sequence developed in the present study is also insensitive to the 1H–1H homonuclear dipolar interactions, relaxation effects owing to its constant-time implementation, and t1-noise from the fluctuations in the MAS.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2026

Characterization of the Entry Steps in Diterpenoid Alkaloid Biosynthesis

The diterpenoid alkaloids are a group of specialized metabolites where the terpenoid and alkaloid classes intersect, and which are found primarily within the Aconitum (Wolf’s-Bane) and Delphinium (Larkspur) genera. While there is considerable interest in these compounds for their wide range of bioactivities, their structural complexity poses a significant challenge for chemical synthesis. Biosynthesis offers an appealing alternative for production, however, little progress has been made towards elucidation of their biosynthetic pathways. Here, we employ a comparative transcriptomics approach to identify six enzymatic steps in the biosynthesis of atisinium, conserved across both Delphinium grandiflorum and Aconitum plicatum . Key to this pathway is a reductase which selectively incorporates ethanolamine over ethylamine into the diterpenoid scaffold. While the majority of diterpenoid alkaloids contain an ethylamine moiety, we demonstrate through isotope labeling in Aconitum callus cultures and a computational metabolomics approach that ethanolamine is, unintuitively, the preferred source of nitrogen for these metabolites. Identification of these enzymes and production of a key intermediate in a heterologous host paves the way for biosynthetic production of this group of metabolites with promise for medicinal applications.

biosynthesis↗
DOE OSTI2020

Calcareous organic matter coatings sequester siderophores in alkaline soils

Although most studies on organic matter stabilization in soils have focused on adsorption to aluminosilicate and iron oxide minerals due to their strong interactions with organic nucleophiles, stabilization within alkaline soils has been empirically correlated with exchangeable Ca concentrations. Yet the extent of competing processes within natural soil remain unclear. We employed sub-micron scale techniques to investigate the minerology and organic carbon on individual fine particles within an alkaline soil from Eastern Washington. XRD, Mössbauer spectroscopy, TEM-EDX-SAED, and XPS analysis demonstrated a mineral assemblage dominated by quartz, feldspars, iron oxides, and calcite. Although exposed Si, Al, and Fe accounted for ~30% of the surface elemental composition, most of the organic carbon and nitrogen was associated with Ca-rich coatings. Adsorption isotherms of two siderophores with the same soil showed greater adsorption of pyoverdine compared with less polar enterobactin. Using NanoSIMS to map the distribution of isotopically labeled siderophores across the surfaces of fine grains, we observed a preference for binding to surfaces heavily coated with organic matter. We propose a mechanism of adsorption by which organic molecules aggregate within calcareous soils via calcium bridging, favoring the stabilization of larger molecules with a greater number of nucleophilic functional groups.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Soil pore architecture and rhizosphere legacy define N 2 O production in root detritusphere

Root detritusphere is one of the most important sources of N 2 O, however, understanding of how N 2 O emission from the detritusphere is influenced by soil properties remains elusive. Here, we evaluated the effects of pore architecture and soil moisture on N 2 O emission during the decomposition of in-situ grown roots of switchgrass, an important bioenergy crop. We combined dual isotope labeling ( 15 C and 15 N) with zymography to gain insights into the location of the microbial N 2 O production in soils with contrasting pore architectures. In the studied soil, the effect of soil pore architecture on N 2 O emissions was 6 times greater than that of soil moisture. Soil dominated by > 30 μm Ø pores (i.e., large-pore soil) had higher chitinase activity than the soil dominated by < 10 μm Ø pores (i.e., small-pore soil), especially near the decomposing roots. The chitinase activity on the decomposing roots was positively correlated with emission of root-derived N 2 O, indicating that N released from root decomposition was an important source of N 2 O. Greater N 2 O and N2 emission was induced by switchgrass roots in soils dominated by the large- compared to the small-pore soils. Here, the microenvironment developed near decomposing roots of the large-pore soil also resulted in positive N 2 O priming. Our study challenged the traditional view on soil moisture as the main factor of N 2 O production. Production and emission of N 2 O was most intensive in microbial activity hotspots (i.e., rhizosphere legacy) in the large pores, where decomposed roots release mineral N as the main N 2 O source.

13C Pulse labeling↗
DOE OSTI2021

Single Quadrupole Multiple Fragment Ion Monitoring Quantitative Mass Spectrometry

Single quadrupole mass spectrometry (MS) with enhanced in-source multiple fragment ion monitoring was designed to perform high sensitivity quantitative mass analyses. Enhanced in-source fragmentation amplifies fragmentation from traditional soft electrospray ionization producing fragment ions that have been found to be identical to those generated in tandem MS. We have combined enhanced in-source fragmentation data with criteria established by the European Union Commission Directive 2002/657/EC for electron ionization single quadrupole quantitative analysis to perform quantitative analyses. These experiments were performed on multiple types of complex samples that included a mixture of 50 standards, as well as cell and plasma extracts. The dynamic range for these quantitative analyses was comparable to triple quadrupole multiple reaction monitoring (MRM) analyses at up to 5 orders of magnitude with the cell and plasma extracts showing similar matrix effects across both platforms. Amino acid and fatty acid measurements performed from certified NIST 1950 plasma with isotopically labeled standards demonstrated accuracy in the range of 91–110% for the amino acids, 76–129% for the fatty acids, and good precision (coefficient of variation <10%). To enhance specificity, a newly developed correlated ion monitoring algorithm was designed to facilitate these analyses. This algorithm autonomously processes, aligns, filters, and compiles multiple ions within one chromatogram enabling both precursor and in-source fragment ions to be correlated within a single chromatogram, also enabling the detection of coeluting species based on precursor and fragment ion ratios. Single quadrupole instrumentation can provide MRM level quantitative performance by monitoring/correlating precursor and fragment ions facilitating high sensitivity analysis on existing single quadrupole instrumentation that are generally inexpensive, easy to operate, and technically less complex.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Rapid Droplet Sampling Interface for Low-Volume, High-Throughput Mass Spectrometry Analysis

Here, we present a rapid droplet sampling interface (RDSI) electrospray ionization mass spectrometry (ESI-MS) system as a high-throughput, low-volume, noncontact, and minimal-carryover approach for characterization of liquids. Liquid characterization was achieved by combining droplet ejection with an open-face microflow capillary with a 2.5 μL/min continuous flow of carrier solvent. Through this implementation, single 0.3 nL droplets containing the analyte effectively mix with 4–8 nL of carrier solvent and create a combined electrospray plume. The carrier solvent continuously cleaned the system, eliminating carryover. A sampling rate of 5 Hz was achieved for droplets containing 1 μM propranolol or 5 μM leu-enkephalin with each droplet fully baseline-resolved (138 ± 32 ms baseline-to-baseline). Using a SCIEX API4000 mass spectrometer, a lower limit of quantification (LLOQ) of propranolol was 15 nM, corresponding to 1.16 fg of propranolol in the droplet, and was linear across 3 orders of magnitude. Further, quantitation could be achieved by adding an isotopically labeled internal standard, as done in conventional ESI. Signal transients were faster than the acquisition speed of the mass spectrometer, resulting in artificially high reproducibility of 15–30% RSD droplet-to-droplet. Analyte–solvent mixing ratios could be controlled by adjusting droplet positioning along the open-face capillary with an optimal position about 0.4 mm from the tip end. The range of analyte coverage was exemplified by measures of peptides and drugs in methanol, water, and buffer solutions. In a comparison to the Open Port Sampling Interface (OPSI) implemented on the same system, the RDSI had 78× greater sensitivity, 6× greater throughput and used significantly less carrier solvent.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Quantitative DNA Stable Isotope Probing Identifies Active Microorganisms Assimilating Volatile Fatty Acids in Full-Scale Enhanced Biological Phosphorus Removal Processes

Enhanced biological phosphorus removal (EBPR) systems often rely on exogenous carbon sources, such as volatile fatty acids (VFAs), to achieve higher P removal. Here, we employed DNA quantitative stable isotope probing (qSIP) using two VFAs, acetate and propionate, in cyclic anaerobic/aerobic incubations to assess their effects on P cycling and microbial activity with biomass from two full-scale EBPR water resource-recovery facilities that utilize VFA addition. We found that anaerobic VFA uptake preferences differed within known groups of PAOs, such as Candidatus Accumulibacter and Tetrasphaera-affiliated members (e.g., Ca. Phosphoribacter), between the two biomasses. The combination of qSIP with metagenomics identified isotopically labeled phages that were linked to active PAOs, highlighting their potential roles in modulating EBPR community composition and activity. The highest levels of anaerobic labeling from acetate were in genomes belonging to Saccharimonadales and Rickettsiales, which are generally host-associated with bacteria and eukaryotes, respectively. Furthermore, this finding highlights the possibility of cross-feeding between PAO hosts and their parasites or predators, as well as the role of so-far uncharacterized organisms participating in carbon cycling under EBPR conditions. Collectively, these results expand our understanding of the ecological interactions involved in communities anaerobically uptaking VFAs and cycling P that are central to EBPR.

Polyphosphate accumulating organisms↗
DOE OSTI2026

Impact of Small-Alkane Solvents on Polyolefin Hydrogenolysis over a Ruthenium Catalyst

Selective catalytic hydrogenolysis of polyolefins is a promising route to convert plastic waste into valuable liquid products, such as lubricants, waxes, and surfactants. However, the high viscosity of polymer melts imposes mass transfer limitations on this reaction. Solvents can mitigate these challenges, but their effects on reaction kinetics and product selectivity remain underexplored. Here, we systematically explore the effects of small n-alkanes and cycloalkanes on the hydrogenolysis of polyethylene and polypropylene over a Ru/TiO 2 catalyst. Using kinetic measurements and isotopic labeling, we show that n-octane at high mass fractions alters the mechanism from direct hydrogenation to solvent-mediated hydrogen transfer, reducing the rate of C–C bond cleavage. Longer alkanes further inhibit reactivity due to stronger surface binding. 1,4-Dimethylcyclohexane suppresses methane formation, favoring heavier products, while decalin likely forms surface-bound aromatics that poison the catalyst. Overall, alkane solvents modulate product selectivity and reduce the yield of methane byproduct, allowing for ∼35–40% selectivity to valuable C 20 -C 30 alkane products. This work highlights the complex impact of polymer–alkane mixtures on hydrogenolysis kinetics relevant to the design of commercial-scale plastic waste valorization processes.

Catalysts↗
DOE OSTI2021

Methane Generation from CO 2 with a Molecular Rhenium Catalyst

The atomic-level tunability of molecular structures is a compelling reason to develop homogeneous catalysts for challenging reactions such as the electrochemical reduction of carbon dioxide to valuable C 1 –C n products. Of particular interest is methane, the largest component of natural gas. Herein, we report a series of three isomeric rhenium tricarbonyl complexes coordinated by the asymmetric diimine ligands 2-(isoquinolin-1-yl)-4,5-dihydrooxazole ( quin-1-oxa ), 2-(quinolin-2-yl)-4,5-dihydrooxazole ( quin-2-oxa ), and 2-(isoquinolin-3-yl)-4,5-dihydrooxazole ( quin-3-oxa ) that catalyze the reduction of CO 2 to carbon monoxide and methane, albeit the latter with a low efficiency. To our knowledge, these complexes are the first examples of rhenium(I) catalysts capable of converting carbon dioxide into methane. Re(quin-1-oxa)(CO) 3 Cl ( 1 ), Re(quin-2-oxa)(CO) 3 Cl ( 2 ), and Re(quin-3-oxa)(CO) 3 Cl ( 3 ) were characterized and studied using a variety of electrochemical and spectroscopic techniques. In bulk electrolysis experiments, the three complexes reduce CO 2 to CO and CH 4 . When the controlled-potential electrolysis experiments are performed at -2.5 V (vs Fc +/0 ) and in the presence of the Brønsted acid 2,2,2-trifluoroethanol, methane is produced with turnover numbers that range from 1.3 to 1.8. Isotope labeling experiments using 13 CO 2 atmosphere produce 13 CH 4 ( m / z = 17) confirming that methane originates from CO 2 reduction. Theoretical calculations are performed to investigate the mechanistic aspects of the 8e – /8H + reduction of CO 2 to CH 4 . Overall, a ligand-assisted pathway is proposed to be an efficient pathway in the formation of CH 4 . Delocalization of the electron density on the (iso)quinoline moiety upon reduction stabilizes the key carbonyl intermediate leading to additional reactivity of this ligand. These results should aid the development of more robust catalytic systems that produce CH 4 from CO 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Amidinate Supporting Ligands Influence Molecularity in Formation of Uranium Nitrides

Uranium nitride complexes are attractive targets for chemists as molecular models for the bonding, reactivity, and magnetic properties of next-generation nuclear fuels, but these molecules are uncommon and can be difficult to isolate due to their high reactivity. Here, we describe the synthesis of three new multinuclear uranium nitride complexes, [U(BCMA) 2 ] 2 (μ-N)(μ-κ 1 :κ 1 -BCMA) (7), [(U(BIMA) 2 ) 2 (μ-N)(μ-N i Pr)(K 2 (μ-η 3 :η 3 -CH 2 CHN i Pr)] 2 (8), and [U(BIMA) 2 ] 2 (μ-N)(μ-κ 1 :κ 1 -BIMA) (9) (BCMA = N,N-bis(cyclohexyl)methylamidinate, BIMA = N,N-bis(iso-propyl)methylamidinate), from U(III) and U(IV) amidinate precursors. By varying the amidinate ligand substituents and azide source, we were able to influence the composition and size of these nitride complexes. 15 N isotopic labeling experiments confirmed the bridging nitride moieties in 7–9 were formed via two-electron reduction of azide. The tetra-uranium cluster 8 was isolated in 99% yield via reductive cleavage of the amidinate ligands; this unusual molecule contains nitrogen-based ligands with formal 1–, 2–, and 3– charges. Additionally, chemical oxidation of the U(IV) precursor U(N 3 )(BCMA) 3 yielded the cationic U(V) species [U(N 3 )(BCMA) 3 ][OTf]. Magnetic susceptibility measurements confirmed a U(IV) oxidation state for the uranium centers in the three nitride-bridged complexes and provided a comparison of magnetic behavior in the structurally related U(III)-U(IV)-U(V) series U(BCMA) 3 , U(N 3 )(BCMA) 3 , and [U(N 3 )(BCMA) 3 ][OTf]. At 240 K, the magnetic moments in this series decreased with increasing oxidation state, i.e., U(III) > U(IV) > U(V); this trend follows the decreasing number of 5f valence electrons along this series.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗