Search NASA⌕ Search

SEARCH · Search NASA

Results for “jet algorithms”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Configuration, Performance, and Commissioning of the ATLAS b-jet Triggers for the 2022 and 2023 LHC data-taking periods

In 2022 and 2023, the Large Hadron Collider produced approximately two billion hadronic interactions each second from bunches of protons that collide at a rate of 40 MHz. The ATLAS trigger system is used to reduce this rate to a few kHz for recording. Selections based on hadronic jets, their energy, and event topology reduce the rate to 𝒪(10) kHz while maintaining high efficiencies for important signatures resulting in b-quarks, but to reach the desired recording rate of hundreds of Hz, additional real-time selections based on the identification of jets containing b-hadrons (b-jets) are employed to achieve low thresholds on the jet transverse momentum at the High-Level Trigger. The configuration, commissioning, and performance of the real-time ATLAS b-jet identification algorithms for the early LHC Run 3 collision data are presented. These recent developments provide substantial gains in signal efficiency for critical signatures; for the Standard Model production of Higgs boson pairs, a 50% improvement in selection efficiency is observed in final states with four b-quarks or two b-quarks and two hadronically decaying τ-leptons.

47 OTHER INSTRUMENTATION↗

Measurement of groomed event shape observables in deep-inelastic electron-proton scattering at HERA

The H1 Collaboration at HERA reports the first measurement of groomed event shape observables in deep inelastic electron-proton scattering (DIS) at $\sqrt{s} =319$ GeV, using data recorded between the years 2003 and 2007 with an integrated luminosity of 351 pb -1 . Event shapes provide incisive probes of perturbative and non-perturbative QCD. Grooming techniques have been used for jet measurements in hadronic collisions; this paper presents the first application of grooming to DIS data. The analysis is carried out in the Breit frame, utilizing the novel Centauro jet clustering algorithm that is designed for DIS event topologies. Events are required to have squared momentum-transfer $Q^2 > 150$ GeV 2 and inelasticity $0.2< y < 0.7$. We report measurements of the production cross section of groomed event 1-jettiness and groomed invariant mass for several choices of grooming parameter. Monte Carlo model calculations and analytic calculations based on Soft Collinear Effective Theory are compared to the measurements.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurements of the production cross-section for a Z boson in association with b - or c -jets in proton–proton collisions at $\sqrt{s} = 13$ TeV with the ATLAS detector

This paper presents a measurement of the production cross-section of a Z boson in association with b- or c-jets, in proton–proton collisions at $\sqrt{s} = 13$ TeV with the ATLAS experiment at the Large Hadron Collider using data corresponding to an integrated luminosity of 140 fb –1 . Inclusive and differential cross-sections are measured for events containing a Z boson decaying into electrons or muons and produced in association with at least one b-jet, at least one c-jet, or at least two b-jets with transverse momentum p T > 20 GeV and rapidity |y| < 2.5. Predictions from several Monte Carlo generators based on next-to-leading-order matrix elements interfaced with a parton-shower simulation, with different choices of flavour schemes for initial-state partons, are compared with the measured cross-sections. The results are also compared with novel predictions, based on infrared and collinear safe jet flavour dressing algorithms. Selected Z+≥ 1 c-jet observables, optimized for sensitivity to intrinsic-charm, are compared with benchmark models with different intrinsic-charm fractions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Search for low-mass dijet resonances using trigger-level jets with the ATLAS detector in p p collisions at sqrt(s)=13 TeV

Searches for dijet resonances with sub-TeV masses using the ATLAS detector at the Large Hadron Collider can be statistically limited by the bandwidth available to inclusive single-jet triggers, whose data-collection rates at low transverse momentum are much lower than the rate from Standard Model multijet production. This data refers to a search for dijet resonances using a strategy called "Trigger-object Level Analysis" (TLA) in ATLAS, where the limitation on high-rate events that can be used for the search is overcome by recording only the event information calculated by the jet trigger algorithms, thereby allowing much higher event rates with reduced storage needs.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Top Quark Pair in Association with an Extra Jet: Phenomenological Analysis at the Tevatron

The first measurement of the cross section of the top quark pair in association with an extra hard jet ($t\bar{t}$+jet) has been performed with 4.1 fb ₋1 of data collected at CDF. The measurement is an important test of perturbative QCD, as NLO effects play an important role in the calculation of the theoretical cross section. In addition, it is also important as a preview of the LHC, for which almost half of the top quark events will be produced with extra jets. Therefore, this process will be a substan- tial background for many new physics signals. The measurement is performed using SecVtx tagged events in the lepton plus jet channel. A data-driven approach is used to predict the background content, and a 2D likelihood is formed to simultaneously measure the $t\bar{t}$+jet and $t\bar{t}$ without extra jet cross sections. The measured result is σ $t\bar{t}$ +jet= 1.6±0.2 stat ±0.5 syst pb which is in agreement with the recent NLO SM predic- tion σ $t\bar{t}$+jet = $+0.16\atop{-3.31}$ pb . In order to elucidate the kinematic profile of the extra jet, an isolation algorithm has been developed. The algorithm has extracted correctly the extra jet out from the final state jets more than 60% of the time. This allowed for correcting the measured distributions of the extra jet for purity/efficiency in order to compare them with the MC distributions. The differences in the kinematic of the extra jet using different SecVtx requirements and different MC models (PYTHIA & MCFM) have been studied. The agreement between data and the simulations is reasonable. The fifth and the fourth highest ET jet in the final state of $t\bar{t}$+jet sample are found to be equally likely the extra jet.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Top Quark Properties from CDF and D0

Recent results on top quark properties measured by the CDF and the D0 collaborations are presented, including the top quark charge using a b-jet charge algorithm and soft lepton tagger, spin-correlations in the helicity basis and in the beam line basis, theWboson helicity in top quark decay, the forward-backward charge asymmetry.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Annual Research Briefs - 2000: Center for Turbulence Research

This report contains the 2000 annual progress reports of the postdoctoral Fellows and visiting scholars of the Center for Turbulence Research (CTR). It summarizes the research efforts undertaken under the core CTR program. Last year, CTR sponsored sixteen resident Postdoctoral Fellows, nine Research Associates, and two Senior Research Fellows, hosted seven short term visitors, and supported four doctoral students. The Research Associates are supported by the Departments of Defense and Energy. The reports in this volume are divided into five groups. The first group largely consists of the new areas of interest at CTR. It includes efficient algorithms for molecular dynamics, stability in protoplanetary disks, and experimental and numerical applications of evolutionary optimization algorithms for jet flow control. The next group of reports is in experimental, theoretical, and numerical modeling efforts in turbulent combustion. As more challenging computations are attempted, the need for additional theoretical and experimental studies in combustion has emerged. A pacing item for computation of nonpremixed combustion is the prediction of extinction and re-ignition phenomena, which is currently being addressed at CTR. The third group of reports is in the development of accurate and efficient numerical methods, which has always been an important part of CTR's work. This is the tool development part of the program which supports our high fidelity numerical simulations in such areas as turbulence in complex geometries, hypersonics, and acoustics. The final two groups of reports are concerned with LES and RANS prediction methods. There has been significant progress in wall modeling for LES of high Reynolds number turbulence and in validation of the v(exp 2) - f model for industrial applications.

Source record↗

Polyhedral Interpolation for Optimal Reaction Control System Jet Selection

An efficient algorithm is described for interpolating optimal values for spacecraft Reaction Control System jet firing duty cycles. The algorithm uses the symmetrical geometry of the optimal solution to reduce the number of calculations and data storage requirements to a level that enables implementation on the small real time flight control systems used in spacecraft. The process minimizes acceleration direction errors, maximizes control authority, and minimizes fuel consumption.

flight optimization↗

Measurement of the inclusive jet cross-section in proton-proton collisions at s = 7 TeV using 4.5 fb &#x2212; 1 of data with the ATLAS detector

CERN-LHC. Double-differential inclusive jet cross-sections measured in pp collisions at the LHC with a 7 TeV centre-of-mass energy are presented as functions of jet transverse momentum and absolute value of rapidity. These measurements are obtained using data corresponding to an integrated luminosity of 4.5 fb^-1, recorded by the ATLAS detector in 2011. The data are corrected for detector effects so that cross-sections are presented at the particle level. Cross-sections are measured up to jet transverse momentum of 2 TeV using jets reconstructed with the anti-kt algorithm with the jet radius parameter R = 0.4 and 0.6.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurements of the groomed and ungroomed jet angularities in pp collisions at $ \sqrt{s}$ = 5.02 TeV

The jet angularities are a class of jet substructure observables which characterize the angular and momentum distribution of particles within jets. These observables are sensitive to momentum scales ranging from perturbative hard scatterings to nonperturbative fragmentation into final-state hadrons. We report measurements of several groomed and ungroomed jet angularities in pp collisions at $\sqrt{s}$ = 5.02 TeV with the ALICE detector. Jets are reconstructed using charged particle tracks at midrapidity (|η| < 0.9). The anti-$k_T$ algorithm is used with jet resolution parameters R = 0.2 and R = 0.4 for several transverse momentum $p^{ch jet}_{T}$ intervals in the 20–100 GeV/c range. Using the jet grooming algorithm Soft Drop, the sensitivity to softer, wide-angle processes, as well as the underlying event, can be reduced in a way which is well-controlled in theoretical calculations. We report the ungroomed jet angularities, λ α , and groomed jet angularities, λ α,g , to investigate the interplay between perturbative and nonperturbative effects at low jet momenta. Various angular exponent parameters α = 1, 1.5, 2, and 3 are used to systematically vary the sensitivity of the observable to collinear and soft radiation. Results are compared to analytical predictions at next-to-leading-logarithmic accuracy, which provide a generally good description of the data in the perturbative regime but exhibit discrepancies in the nonperturbative regime. Moreover, these measurements serve as a baseline for future ones in heavy-ion collisions by providing new insight into the interplay between perturbative and nonperturbative effects in the angular and momentum substructure of jets. They supply crucial guidance on the selection of jet resolution parameter, jet transverse momentum, and angular scaling variable for jet quenching studies.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Identification of heavy-flavour jets with the CMS detector in pp collisions at 13 TeV

Many measurements and searches for physics beyond the standard model at the LHC rely on the efficient identification of heavy-flavour jets, i.e. jets originating from bottom or charm quarks. In this paper, the discriminating variables and the algorithms used for heavy-flavour jet identification during the first years of operation of the CMS experiment in proton-proton collisions at a centre-of-mass energy of 13 TeV, are presented. Heavy-flavour jet identification algorithms have been improved compared to those used previously at centre-of-mass energies of 7 and 8 TeV. For jets with transverse momenta in the range expected in simulated events, these new developments result in an efficiency of 68% for the correct identification of a b jet for a probability of 1% of misidentifying a light-flavour jet. The improvement in relative efficiency at this misidentification probability is about 15%, compared to previous CMS algorithms. In addition, for the first time algorithms have been developed to identify jets containing two b hadrons in Lorentz-boosted event topologies, as well as to tag c jets. The large data sample recorded in 2016 at a centre-of-mass energy of 13 TeV has also allowed the development of new methods to measure the efficiency and misidentification probability of heavy-flavour jet identification algorithms. The b jet identification efficiency is measured with a precision of a few per cent at moderate jet transverse momenta (between 30 and 300 GeV) and about 5% at the highest jet transverse momenta (between 500 and 1000 GeV).

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Performance of b-jet identification in the ATLAS experiment

The identification of jets containing b hadrons is important for the physics programme of the ATLAS experiment at the Large Hadron Collider. Several algorithms to identify jets containing b hadrons are described, ranging from those based on the reconstruction of an inclusive secondary vertex or the presence of tracks with large impact parameters to combined tagging algorithms making use of multi-variate discriminants. An independent b-tagging algorithm based on the reconstruction of muons inside jets as well as the b-tagging algorithm used in the online trigger are also presented. The b-jet tagging efficiency, the c-jet tagging efficiency and the mistag rate for light flavour jets in data have been measured with a number of complementary methods. The calibration results are presented as scale factors defined as the ratio of the efficiency (or mistag rate) in data to that in simulation. In the case of b jets, where more than one calibration method exists, the results from the various analyses have been combined taking into account the statistical correlation as well as the correlation of the sources of systematic uncertainty.

43 PARTICLE ACCELERATORS↗

Investigation of ALEGRA shock hydrocode algorithms using an exact free surface jet flow solution.

Computational testing of the arbitrary Lagrangian-Eulerian shock physics code, ALEGRA, is presented using an exact solution that is very similar to a shaped charge jet flow. The solution is a steady, isentropic, subsonic free surface flow with significant compression and release and is provided as a steady state initial condition. There should be no shocks and no entropy production throughout the problem. The purpose of this test problem is to present a detailed and challenging computation in order to provide evidence for algorithmic strengths and weaknesses in ALEGRA which should be examined further. The results of this work are intended to be used to guide future algorithmic improvements in the spirit of test-driven development processes.

Hanks, Bradley Wright.↗

Measurement of the double-differential inclusive jet cross section in proton–proton collisions at $\sqrt{s} = 13\,\text {TeV} $

A measurement of the double-differential inclusive jet cross section as a function of jet transverse momentum $p_{\mathrm {T}} $ and absolute jet rapidity $|y |$ is presented. The analysis is based on proton–proton collisions collected by the CMS experiment at the LHC at a centre-of-mass energy of 13 $\,\text {TeV}$ . The data samples correspond to integrated luminosities of 71 and 44 $\,\text {pb}^\text {-1}$ for $|y |<3$ and $3.2<|y |<4.7$ , respectively. Jets are reconstructed with the anti- $k_{\mathrm {t}} $ clustering algorithm for two jet sizes, R, of 0.7 and 0.4, in a phase space region covering jet $p_{\mathrm {T}} $ up to 2 $\,\text {TeV}$ and jet rapidity up to $|y |$ = 4.7. Predictions of perturbative quantum chromodynamics at next-to-leading order precision, complemented with electroweak and nonperturbative corrections, are used to compute the absolute scale and the shape of the inclusive jet cross section. The cross section difference in R, when going to a smaller jet size of 0.4, is best described by Monte Carlo event generators with next-to-leading order predictions matched to parton showering, hadronisation, and multiparton interactions. In the phase space accessible with the new data, this measurement provides a first indication that jet physics is as well understood at $\sqrt{s}=13\,\text {TeV} $ as at smaller centre-of-mass energies.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Heterogeneous Graph Neural Network for identifying hadronically decayed tau leptons at the High Luminosity LHC

Here, we present a new algorithm that identifies reconstructed jets originating from hadronic decays of tau leptons against those from quarks or gluons. No tau lepton reconstruction algorithm is used. Instead, the algorithm represents jets as heterogeneous graphs with tracks and energy clusters as nodes and trains a Graph Neural Network to identify tau jets from other jets. Different attributed graph representations and different GNN architectures are explored. We propose to use differential track and energy cluster information as node features and a heterogeneous sequentially-biased encoding for the inputs to final graph-level classification.

47 OTHER INSTRUMENTATION↗

Application of integration algorithms in a parallel processing environment for the simulation of jet engines

The application of Predictor corrector integration algorithms developed for the digital parallel processing environment are investigated. The algorithms are implemented and evaluated through the use of a software simulator which provides an approximate representation of the parallel processing hardware. Test cases which focus on the use of the algorithms are presented and a specific application using a linear model of a turbofan engine is considered. Results are presented showing the effects of integration step size and the number of processors on simulation accuracy. Real time performance, interprocessor communication, and algorithm startup are also discussed.

Krosel, S. M.↗