Search NASA⌕ Search

SEARCH · Search NASA

Results for “laser absorption”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Laser absorption flow diagnostics for use in hypersonic ground-based and flight experiments

Consideration is given to laboratory ground-based scale systems for measuring OH and NO and diode laser systems for measuring O2 and H2O. Several diagnostic instruments which are currently being used in a scramjet combustor test rig of the Ames 16-inch shock tunnel are described. Data on mole fraction, temperature, density, pressure, and velocity is obtained using specific data reduction techniques. These measurements provide critical data for evaluation of the propulsion system performance which include mass capture for quantification of fuel equivalence ratio (O2), flow contamination and emission levels (NO), combustion progress (OH), and injector mixing and combustion efficiency (H2O).

Cavolowsky, John A.↗
NASA NTRS1991

Open-path tunable diode laser absorption for eddy correlation flux measurements of atmospheric trace gases

Biogenic emissions from and dry deposition to terrestrial surfaces are important processes determining the trace gas composition of the atmosphere. An instrument has been developed for flux measurements of gases such as CH4, N2O, and O3 based on the eddy correlation technique which combines trace gas fluctuation measurements with simultaneous windfield measurements. The instrument combines a tunable diode laser infrared light source with an open-path multipass absorption cell in order to provide the fast time response and short base pathlength required for the eddy correlation method. Initial field tests using the instrument to measure methane emissions from a local wetland demonstrate the capability for high precision eddy correlation flux measurements.

Anderson, Stuart M.↗
NASA NTRS2003

Airborne Measurements of Formaldehyde Employing a Tunable Diode Laser Absorption Spectrometer During TRACE-P

This final report summarizes the progress achieved over the entire 3-year proposal period including two extensions spanning 1 year. These activities include: 1) Preparation for and participation in the NASA 2001 TRACE-P campaign using our airborne tunable diode laser system to acquire measurements of formaldehyde (CH2O); 2) Comprehensive data analysis and data submittal to the NASA archive; 3) Follow up data interpretation working with NASA modelers to place our ambient CH2O measurements into a broader photochemical context; 4) Publication of numerous JGR papers using this data; 5) Extensive follow up laboratory tests on the selectivity and efficiency of our CH20 scrubbing system; and 6) An extensive follow up effort to assess and study the mechanical stability of our entire optical system, particularly the multipass absorption cell, with aircraft changes in cabin pressure.

Fried, Alan↗
NASA NTRS2007

Measurement of Carbon Dioxide Column via Space Borne Laser Absorption

In order to better understand the budget of carbon dioxide in the Earth's atmosphere it is necessary to develop a global high precision understanding of the carbon dioxide column. In order to uncover the 'missing sink that is responsible for the large discrepancies in the budget as we presently understand it calculation has indicated that measurement accuracy on the order of 1 ppm is necessary. Because typical column average CO2 has now reached 380 ppm this represents a precision on the order of .25% for these column measurements. No species has ever been measured from space at such a precision. In recognition of the importance of understanding the CO2 budget in order to evaluate its impact on global warming the National Research Council in its decadal survey report to NASA recommended planning for a laser based total CO2 mapping mission in the near future. The extreme measurement accuracy requirements on this mission places very strong requirements on the laser system used for the measurement. This work presents an analysis of the characteristics necessary in a laser system used to make this measurement. Consideration is given to the temperature dependence, pressure broadening, and pressure shift of the CO2 lines themselves and how these impact the laser system characteristics Several systems for meeting these requirements that are under investigation at various institutions in the US as well as Europe will be discussed.

Heaps, WIlliam S.↗
NASA NTRS2015

Development and Preliminary Tests of an Open-Path Airborne Diode Laser Absorption Instrument for Carbon Dioxide

Carbon dioxide (CO2) is well known for its importance as an atmospheric greenhouse gas, with many sources and sinks around the globe. Understanding the fluxes of carbon into and out of the atmosphere is a complex and daunting challenge. One tool applied by scientists to measure the vertical flux of CO2 near the surface uses the eddy covariance technique, most often from towers but also from aircraft flying specific patterns over the study area. In this technique, variations of constituents of interest are correlated with fluctuations in the local vertical wind velocity. Measurement requirements are stringent, particularly with regard to precision, sensitivity to small changes, and temporal sampling rate. In addition, many aircraft have limited payload capability, so instrument size, weight, and power consumption are also important considerations. We report on the development and preliminary application of an airborne sensor for the measurement of atmospheric CO2. The instrument, modeled on the successful DLH (Diode Laser Hygrometer) series of instruments, has been tested in the laboratory and on the NASA DC-8 aircraft. Performance parameters such as accuracy, precision, sensitivity, specificity, and temporal response are discussed in the context of typical atmospheric variability and suitability for flux measurement applications. On-aircraft, in-flight data have been obtained and are discussed as well. Performance of the instrument has been promising, and continued flight testing is planned during 2016.

Diskin, Glenn S.↗
DOE OSTI2020

Influence of the double bond position in combustion chemistry of methyl butene isomers: A shock tube and laser absorption study

Shock tube experiments have been carried out on 2–methyl–1–butene (2M1B), 2–methyl–2–butene (2M2B), and 3–methyl–1–butene (3M1B)—the three isomers of methyl butene compound. Here, carbon monoxide (CO) time–histories and ignition delay times are obtained behind reflected shockwaves over the temperature range of 1350–1630 K and pressures of 8.3–10.5 atm with stoichiometric mixtures of 0.075% fuel in O 2 /Ar. Comparative ignition study reveals that 3M1B ignites significantly faster than the other two isomers, while 2M1B dissociates earlier but ignites later than 2M2B. Possible mechanisms for this behavior are discussed with ignition delay time sensitivity and reaction path analysis. In addition, time–resolved CO measurements are compared with three different reaction mechanisms from the literature. Sensitivity analyses have been carried out to identify important reactions that need attention to accurately predict the chemistry of these isomers. Further investigation into the rates of unimolecular fuel decomposition reactions and C 3 H 3 + O 2 = CH 2 CO + HCO reaction are suggested based on the current investigation.

09 BIOMASS FUELS↗
DOE OSTI2020

Dynamic computational optical fringe mitigation in tunable laser absorption spectroscopy

In optical spectroscopic systems where unwanted optical scattering cannot be eliminated, Fabry-Pérot etalons cause unpredictable changes in the spectral background. Frequent system calibration is then required to maintain the desired measurement accuracy, which presents a major limitation to the spectrometer. We introduce a computational approach to mitigate the adverse effects of optical fringing without hardware modifications. Motivated by experimental observations of complicated fringe behaviors, we simplify the problem by decomposing the fringe background into component etalons that can be addressed according to their individual characteristics. The effectiveness of the proposed method is demonstrated on a silicon photonic methane sensor, where accurate measurements of methane concentration are obtained from spectral data strongly affected by optical fringes.

Teng, Chu C. (ORCID:0000000152744835)↗
DOE OSTI2025

FY25 Mid-Year Report: FABIA In-Field Laser Absorption Spectroscopy for UF6 Enrichment

From September 2024 through April 2025, the FABIA team has been working towards completing the IAEA requirements for technology transfer of the instrument. The primary tasks in place for this transfer are to complete a validation study using various enrichments of UF6, to finalize the data analysis routines in the FABIA software, and to complete FABIA electrical component compatibility. These topics are expanded in greater detail below. In addition to the tasks, the FABIA team hosted IAEA representatives to observe a live analysis demonstration of the FABIA instrument on February 3, 2025. As a result of this visit, some updates to the tasks were communicated.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗