Search NASA⌕ Search

SEARCH · Search NASA

Results for “lasing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Spectral performance of monolithic holmium and thulium lasers

Fabry-Perot resonators have been used to demonstrate single-mode lasing of holmium and neodymium YAG. The previous demonstration in the holmium laser required TE cooling the crystal to -15 C in order to achieve threshold. The present study extends that result, demonstrating +25 C operation in a 1-mm thick plano/plano resonator. The experimental configuration of lasing both the holmium and thulium lasers used a 500-mW diode laser which was collimated, circularized, and focused into a beam radius of 60 microns. The single-frequency lasing spectrum of the holmium laser is shown. By adjusting the mirror reflectivity, the ability to control the laser's wavelength is demonstrated. This laser operated with 11 mW of optical power, a 57-percent slope efficiency, and 120-mW threshold vs absorbed diode power laser for the 60-micron beam radius. The thulium laser operated very efficiently at room temperature, but on seven longitudinal modes. The Tm:TAG laser exhibits typical characteristics of spatial hole burning not seen in the Ho:Tm:YAG for flat/flat resonators.

Storm, Mark E.↗
NASA NTRS1992

Laser power transmission

An overview of previous studies related to laser power transmission is presented. Particular attention is given to the use of solar pumped lasers for space power applications. Three general laser mechanisms are addressed: photodissociation lasing driven by sunlight, photoexcitation lasing driven directly by sunlight, and photoexcitation lasing driven by thermal radiation.

Conway, Edmund J.↗
NASA NTRS1994

Computational modelling of Er(3+): Garnet laser materials

The Er(3+) ion has attracted a lot of interest for four reasons: (1) Its (4)I(sub 13/2) yields (4)I(sub 15/2) transition lases in the eyesafe region near 1.5 micron; (2) the (4)I(sub 13/2) transition lases near 2.8 micron, an important wavelength for surgical purposes; (3) it displays surprisingly efficient upconversion with lasing observed at 1.7, 1.2, 0.85, 0.56, 0.55, and 0.47 micron following 1.5 micron pumping; and (4) it has absorption bands at 0.96 and 0.81 micron and thus can be diode pumped. However, properties desirable for upconversion reduce the efficiency of 1.5 and 3 micron laser operation and vice versa. Since all of the processes are influenced by the host via the crystal field induced stark splittings in the Er levels, this project undertook modelling of the host influence on the Er lasinng behavior. While growth and measurement of all ten Er(3+) doped garnets is the surest way of identifying hosts which maximize upconversion (or conversly, 1.5 and 3 micron performance), it is also expensive - costing approximately $10,000/material or approximately $100,000 for the materials computationally investigated here. The calculations were performed using a quantum mechanical point charge model developed by Clyde Morrison at Harry Diamond Laboratories. The programs were used to fit the Er:YAG experimental energy levels so that the crystal field parameters, B(sub nm) could be extracted. From these radial factors, rho (sub n) were determined for Er(3+) in garnets. These, in combination with crystal field components, Anm, available from X-ray data, were used to predict energy levels for Er in the other nine garnet hosts. The levels in Er:YAG were fit with an rms error of 12.2/cm over a 22,000/cm range. Predicted levels for two other garnets for which literature values were available had rms errors of less than 17/cm , showing the calculations to be reliable. Based on resonances between pairs of calculated stark levels, the model predicts GSGG as the best host for 1.5 micron laser operation, GSGG or YSAG as the best host for a 2.8 micron operation, and LuGG as the best host for an upconversion material.

Spangler, Lee H.↗
NASA NTRS1995

Reduced dimer production in solar-simulator-pumped continuous wave iodine lasers based on model simulations and scaling and pumping studies

A numerical rate equation model for a continuous wave iodine laser with longitudinally flowing gaseous lasant is validated by approximating two experiments that compare the perfluoroalkyl iodine lasants n-C3F7I and t-C4F9I. The salient feature of the simulations is that the production rate of the dimer (C4F9)2 is reduced by one order of magnitude relative to the dimer (C3F7)2. The model is then used to investigate the kinetic effects of this reduced dimer production, especially how it improves output power. Related parametric and scaling studies are also presented. When dimer production is reduced, more monomer radicals (t-C4F9) are available to combine with iodine ions, thus enhancing depletion of the laser lower level and reducing buildup of the principal quencher, molecular iodine. Fewer iodine molecules result in fewer downward transitions from quenching and more transitions from stimulated emission of lasing photons. Enhanced depletion of the lower level reduces the absorption of lasing photons. The combined result is more lasing photons and proportionally increased output power.

Costen, Robert C.↗
NASA NTRS1995

Water vapor spectroscopy in the 815-nm wavelength region for Differential Absorption Lidar measurements

The differential absorption lidar (DIAL) technique was first applied to the remote measurement of atmospheric water vapor profiles from airborne platforms in 1981. The successful interpretation of the lidar profiles relies strongly on an accurate knowledge of specific water vapor absorption line parameters: line strength, pressure broadening coefficient, pressure-induced shift coefficient and the respective temperature-dependence factors. NASA Langley Research Center has developed and is currently testing an autonomous airborne water vapor lidar system: LASE (Lidar Atmospheric Sensing Experiment). This DIAL system uses a Nd:YAG-pumped Ti:Sapphire laser seeded by a diode laser as a lidar transmitter. The tunable diode has been selected to operate in the 813-818 nm wavelength region. This 5-nm spectral interval offers a large distribution of strengths for temperature-insensitive water vapor absorption lines. In support of the LASE project, a series of spectroscopic measurements were conducted for the 16 absorption lines that have been identified for use in the LASE measurements. Prior to this work, the experimental data for this water vapor absorption band were limited - to our knowledge - to the line strengths and to the line positions.

Ponsardin, Patrick↗
NASA NTRS1993

Solid state laser

A wavelength-tunable, injection-seeded, dispersion-compensated, dispersively-pumped solid state laser includes a lasing medium; a highly reflective mirror; an output coupler; at least one isosceles Brewster prism oriented to the minimum deviation angle between the medium and the mirror for directing light of different wavelengths along different paths; means for varying the angle of the highly reflective mirror relative to the light from at least one Brewster angle for selecting a predetermined laser operating wavelength; a dispersion compensation apparatus associated with the lasing medium; a laser injection seeding port disposed between the dispersion compensation apparatus and one of the mirror and coupler and including a reflective surface at an acute non-Brewster angle to the laser beam for introducing a seed input; a dispersion compensation apparatus associated with the laser medium including opposite chirality optical elements; the lasing medium including a pump surface disposed at an acute angle to the laser beam to define a discrete path for the pumping laser beam separate from the pumped laser beam.

Rines, Glen A.↗
NASA NTRS2015

A New Technique for the Retrieval of Near Surface Water Vapor Using DIAL Measurements

Water vapor is one of the most important atmospheric trace gas species and influences radiation, climate, cloud formation, surface evaporation, precipitation, storm development, transport, dynamics, and chemistry. For improvements in NWP (numerical weather prediction) and climate studies, global water vapor measurements with higher accuracy and vertical resolution are needed than are currently available. Current satellite sensors are challenged to characterize the content and distribution of water vapor in the Boundary Layer (BL) and particularly near the first few hundred meters above the surface within the BL. These measurements are critically needed to infer surface evaporation rates in cloud formation and climate studies. The NASA Langley Research Center Lidar Atmospheric Sensing Experiment (LASE) system, which uses the Differential Absorption Lidar (DIAL) technique, has demonstrated the capability to provide high quality water vapor measurements in the BL and across the troposphere. A new retrieval technique is investigated to extend these DIAL water vapor measurements to the surface. This method uses signals from both atmospheric backscattering and the strong surface returns (even over low reflectivity oceanic surfaces) using multiple gain channels to cover the large signal dynamic range. Measurements can be made between broken clouds and in presence of optically thin cirrus. Examples of LASE measurements from a variety of conditions encountered during NASA hurricane field experiments over the Atlantic Ocean are presented. Comparisons of retrieved water vapor profiles from LASE near the surface with dropsonde measurements show very good agreement. This presentation also includes a discussion of the feasibility of developing space-based DIAL capability for high resolution water vapor measurements in the BL and above and an assessment of the technology needed for developing this capability.

Ismail, Syed↗
DOE OSTI2026

Discovery of tunable and soluble organic emitters for solid-state lasers with a self-driving laboratory

We have recently demonstrated the ability of using self-driving laboratories for AI-driven searches of organic emitters for solid-state lasing devices. Our past workflow featured solubility challenges for such large molecular moieties. In this next-generation study, we return to the drawing board to explore a family of com-pounds that are much solution processable and composed of a set of electronic cores that provide a broader color response. Out of 252 potential candidates,and with guidance from DFT calculations, we selectively perform a compre-hensive study exploring 51 fluorene-based A-B-A type organic laser oligomers, armed with our self-driving lab. The candidates range from simple hydrocarbon molecules to complex hetero atom-mixed molecules. As a result of this study, we highlight diketopyrrolopyrrole and benzodiazole derivatives for their largely red-shifted emissions. Furthermore, we investigate the effect of color change aris-ing from hetero atom permutation, fluorine addition, thiophene coupling, and a combination of fluorine addition and thiophene coupling. Amplified spontaneous emission (ASE) measurements in the solid state further corroborate the lasing potential of selected candidates, reinforcing their suitability for future device applications. The computational study with density functional theory confirms the experimental results.

fluorescence↗
DOE OSTI2025

Super-resolution stimulated X-ray Raman spectroscopy

Propagation of intense X-ray pulses through dense media has led to the observation of phenomena such as atomic X-ray lasing, self-induced transparency and stimulated X-ray Raman scattering (SXRS)4. SXRS has been long predicted as a means to launch and probe valence-electron wavepackets and as a building block for nonlinear X-ray spectroscopies. However, experimental observations of SXRS to date have not provided spectroscopic information, and theoretical modelling has largely implemented hard-to-realize phase-coherent attosecond pulses. Here we demonstrate SXRS with spectroscopic precision, that is, detection of valence-excited states in neon with a near Fourier-limited joint energy–time resolution of 0.1 eV–40 fs. We used a new covariance analysis between statistically spiky broadband incident X-ray and scattered X-ray Raman pulses. Using 18,000 single shots, we beat not only the incident (about 8 eV) bandwidth but also the approximately 0.2 eV instrumental energy resolution, thus creating super-resolution conditions, in analogy to super-resolved fluorescence microscopy. Our experimental results, supported by ab initio propagation simulations, reveal the competition between lasing in the ion and stimulated Raman scattering in the neutral. We demonstrate enhanced signal collection efficiency and a broad excitation window, surpassing spontaneous Raman efficiencies by orders of magnitude. This stochastic SXRS approach represents a first step towards tracking elementary events that determine chemical outcomes.

nonlinear x-ray spectroscopy↗
DOE OSTI2025

Measurements of attenuation and scattering properties of water-based liquid scintillator

Water-based liquid scintillator (WbLS) is a hybrid detector medium which has been proposed as a fill material for future large-volume rare event searches, including ν − detectors. This family of scintillating suspensions promises waterlike attenuation and scattering behavior, while offering scintillation light yield for sub-Cherenkov-threshold events. These features may allow for improved vertex and energy resolution, and concomitant improvements in background rejection and particle identification. While subscale measurements of light yield, timing and pulse-shape have been performed in several WbLS formulations, detailed measurements of the attenuation and scattering properties of WbLS remain a critical, unresolved step along the pathway to deployment. In pursuit of a better understanding of these parameters, a “long-arm” attenuation and scattering instrument has been developed at Lawrence Livermore National Laboratory, dubbed LASE (Livermore Attenuation and Scattering Experiment). Optical property measurements have been performed using LASE in DI water, Gd-water, WbLS and Gd-WbLS. Measurements of the optical properties of WbLS (1% LAB-PPO scintillator) provided by Brookhaven National Laboratory demonstrate an attenuation minimum of 4.87 × 10 − 4 ± 1.42 × 10 − 4 cm − 1 at 450 nm, while Gd-loaded WbLS (1% LAB-PPO scintillator, 0.1% Gd) demonstrated a minimum attenuation coefficient of 4.77 × 10 − 4 ± 1.27 × 10 − 4 cm − 1 at the same wavelength. Measurements of scattering in WbLS show a scattering coefficient of 3.39 × 10 − 4 ± 1.98 × 10 − 5 cm − 1 at the 450 nm attenuation minimum, while Gd-WbLS has a scattering coefficient of 2.8 × 10 − 4 ± 1.63 × 10 − 5 cm − 1 at that wavelength. These scattering and attenuation coefficients are significantly larger than measured for DI water at similar wavelengths ( 8.8 × 10 − 5 cm − 1 ± 3.8 × 10 − 5 attenuation at 430 nm, 2.2 × 10 − 5 ± 1.28 × 10 − 6 cm − 1 scattering). Though the WbLS attenuation and scattering coefficients measured are lower than the corresponding values published for ultrapure oils and LAB-PPO liquid scintillator, the material tested attenuates significantly more than water across the blue and green portions of the visible spectrum. This attenuation is markedly stronger at wavelengths under 430 nm. Published by the American Physical Society 2025

47 OTHER INSTRUMENTATION↗
DOE OSTI2025

Multi-mode THz quantum-cascade VECSELs based on disordered metasurfaces

Quantum-cascade vertical-external-cavity surface-emitting-lasers (VECSELs) based on disordered amplifying metasurfaces are demonstrated and explored as potential broadband, multi-mode THz sources. The disorder is introduced along one spatial axis of the metasurface by pseudo-randomly varying the width of its resonant ridge antennas. Compared to a quantum-cascade (QC) VECSEL based on a uniform metasurface, the disordered structure supports much more localized transverse modes with reduced spatial overlap within the QC gain material. This localization is hypothesized to facilitate the spatial hole burning of the gain material and, therefore, enable multi-mode lasing, particularly for short cavities on the order of a few wavelengths. Several devices have been fabricated and shown to differ from uniform QC-VECSELs in a few key ways, possessing highly nonlinear light-current characteristics, angle-dependent emission spectra and broadband multi-mode lasing. At most, 17 modes are simultaneously observed, spanning 680 GHz. The number of VECSEL modes is shown to have an inverse relationship with the cavity length, which is attributed to increased diffractive losses in the open plano-plano cavity. As the cavity length is tuned, the device emits over a quasi-continuous band from 3.15 to 3.97 THz or up to 4.24 THz with a longitudinal mode hop.

Morag, Eilam [Univ. of California, Los Angeles, CA↗
DOE OSTI2024

ORBITAL ANGULAR MOMENTUM BEAMS RESEARCH USING A FREE-ELECTRON LASER OSCILLATOR

Orbital angular momentum (OAM) photon beams are excellent tools for non-contact optical manipulation of mat- ter in a broad photon energy range. A free-electron laser (FEL) oscillator is well-suited for studying OAM beams with various features including a wide spectral coverage, wavelength tunability, two-color lasing, polarization control, etc. Here, we report the first experimental demonstration of superposed OAM beams from an oscillator FEL. Lasing at around 458 nm, we have generated superposed OAM beams up to the fourth order as a superposition of two pure OAM modes with opposite helicities. These generated beams have a good beam quality, a high degree of circular polarization, and high power. Using external rf modulation with frequen- cies from 1 to 30 Hz, we also developed a pulsed mode operation of the OAM beams with a highly reproducible temporal structure. FEL operation showcased in this work can be extended to higher photon energies, e.g. using a future x-ray FEL oscillator. The operation of such an OAM FEL also paves the way for the generation of OAM gamma-ray beams via Compton scattering.

Liu, P.↗
NASA NTRS1971

Research and investigation of gas dynamic lasers

Chemical mixing laser investigations were conducted (1) to investigate the properties of a bimolecular exchange laser system pumped by the H + Cl2 yields HCl(v) + Cl reaction, initiated by arc-dissociated H2, with lasing occurring between wavelengths of 3.4 and 4.0 microns, and (2) to establish the feasibility of an atom recombination-transfer laser employing recombination of arc-dissociated nitrogen with subsequent transfer of vibrational energy to CO2 for lasing at 10.6 microns. One-dimensional analytical results indicate higher results should be obtained with up to v = 3 to 2 transitions participating. Diagnostic and analytical results show that the reaction mechanism during mixing, a back reaction of HCl(v) with H atoms, reaction of Cl with H2(v), moderately fast V-V, V-T processes, and possible HCl(o) initial contaminant level may explain the low performance. N2-CO2 thermal mixing laser studies were extended to measure the efficiency of transfer of recombination energy in such a nonequilibrium N2 source to 10.6 microns optical energy. The low level of efficiency suggests that V-T decay processes may prevent vibrational energy freezing until much lower temperatures are achieved and that trapping of energy in long-lived electronic excitation of N2 may be a factor.

Boedeker, L. R.↗
NASA NTRS1972

Supersonic electrical-discharge copper vapor laser.

A copper vapor laser, utilizing a pulsed discharge transverse to a supersonic flow of copper vapor, argon, and helium and oscillating at 5106 and 5782 A, has been built and tested. Laser energy densities per pulse of 2.5 microjoules per cu cm have been achieved to date. Laser pulse widths of up to 185 nsec have been obtained with delay times after initiation of the current pulse of 220 to 250 nsec. Both the delay time and pulse width are in good agreement with theoretical predictions. Quenching of the laser pulse is shown to be due to a rapid increase in the rate of equilibration of the lasing levels by electron collisions, and to a decrease in the differential pumping of the lasing levels from the ground state because of a decay in the electron temperature.

Russell, G. R.↗
NASA NTRS1978

Nuclear pumping of a neutral carbon laser

Nuclear pumped lasing on the neutral carbon line at 1.45 micron was achieved in mixtures of He-CO, He-N2-CO, He-CO2, and Ne-CO and Ne-CO2. A minimum thermal neutron flux of 2 x 10 to the 14th power sq cm-sec was sufficient for oscillation in the helium mixtures. The peak of the laser output was delayed up to 5.5 ms relative to the neutron pulse in He-CO2, He-N2-CO, Ne-CO, and Ne-CO2 mixtures while no delay was observed in He-CO mixtures. Lasing was obtained with helium pressures from 20 to 800 T, Ne pressures from 100 to 200 T, CO from 0.25 to 20 mT, N2 from 0.5 mT, and CO2 from 0.1 to 25 mT in the respective mixtures.

Prelas, M. A.↗
NASA NTRS1978

Stabilization of He2(A(sup 3)Sigma(sub u)(+)) molecules in liquid helium by optical pumping for vacuum UV laser

A technique is disclosed for achieving large populations of metastable spin-aligned He2(a 3 Sigma u +) molecules in superfluid helium to obtain lasing in the vacuum ultraviolet wavelength regime around 0.0800 micron m by electronically exciting liquid (superfluid) helium with a comparatively low-current electron beam and spin aligning the metastable molecules by means of optical pumping with a modestly-powered (100mW) circularly-polarized continuous wave laser operating at, for example, 0.9096 or 0.4650 micron m. Once a high concentration of spin-aligned He2 (a 3 Sigma u +) is achieved with lifetimes of a few milliseconds, a strong microwave signal destroys the spin alignment and induces a quick collisional transition of He2 (a 3 Sigma u +) molecules to the a 1 Sigma u + state and thereby a lasing transition to the X 1 Sigma g + state.

Zmuidzinas, J. S.↗
NASA NTRS1979

Initial conceptual design study of self-critical nuclear pumped laser systems

An analytical study of self-critical nuclear pumped laser system concepts was performed. Primary emphasis was placed on reactor concepts employing gaseous uranium hexafluoride (UF6) as the fissionable material. Relationships were developed between the key reactor design parameters including reactor power level, critical mass, neutron flux level, reactor size, operating pressure, and UF6 optical properties. The results were used to select a reference conceptual laser system configuration. In the reference configuration, the 3.2 m cubed lasing volume is surrounded by a graphite internal moderator and a region of heavy water. Results of neutronics calculations yield a critical mass of 4.9 U(235) in the form (235)UF6. The configuration appears capable of operating in a continuous steady-state mode. The average gas temperature in the core is 600 K and the UF6 partial pressure within the lasing volume is 0.34 atm.

Rodgers, R. J.↗
NASA NTRS1978

Nuclear pumping of a neutral carbon laser

Nuclear pumped lasing on the neutral carbon line at 1.45 microns has been achieved in mixtures of He-CO, He-N2-CO, He-CO2, and Ne-CO and Ne-CO2. A minimum thermal neutron flux of 2 x 10 to the 14th n/sq cm-sec was sufficient for oscillation in the helium mixtures. The peak of the laser output was delayed up to 5.5 ms relative to the neutron pulse in He-CO2, He-N2-CO, Ne-CO and Ne-CO2 mixtures while no delay was observed in He-CO mixtures. Lasing was obtained with helium pressures from 20 to 800 T, Ne pressures from 100 to 200 T, CO from 0.25 to 20 mT, N2 from 0.5 to 5 mT, and CO2 from 0.1 to 25 mT in the respective mixtures.

Prelas, M. A.↗