Search NASA⌕ Search

SEARCH · Search NASA

Results for “lead-free”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Thermophysical modeling of raw glaze liquidus temperature and viscosity

Raw glazes, which do not contain pre-melted glass frits, are widely used due to their low cost. The natural variability of the mineral compositions used in raw glazes affects their viscosity during firing. Molten glaze viscosity plays an important role in determining the final surface quality; therefore, it is important to determine how raw glaze composition and firing conditions affect viscosity. Thermophysical modeling provides a way to evaluate the liquidus temperature and viscosity of molten glazes as a function of composition and oxygen activity. Equilibrium phase volume fraction and composition of 242 raw glaze recipes were evaluated under oxidizing and reducing conditions. Undissolved or precipitation of solid phases explain the secondary flux transition from anti-fluxing to fluxing near the liquidus temperature. The liquidus temperature and viscosity of iron glazes decrease as a function of increasing iron content under a reducing atmosphere. The empirical probability distribution of molten glaze viscosity follows a lognormal distribution, with lead glazes having significantly lower viscosity compared with glazes without lead. Here, the peak firing temperature viscosity of lead-free glazes is near the working point of glass. Multiple linear regression analysis shows that the peak firing temperature viscosity and liquidus temperature significantly predict the viscosity factor.

36 MATERIALS SCIENCE↗
DOE OSTI2020

tert-butoxides as precursors for atomic layer deposition of alkali metal containing thin films

Alkali metal containing materials have become increasingly attractive in a world hunting for sustainable energy materials and green functional devices. Lithium- and sodium battery technology, lead-free piezo- and ferroelectric devices, and record-breaking alkali doped tandem perovskite solar cells are among the applications where alkali metal-containing thin films get increasing attention. Atomic layer deposition (ALD) is one of the enabling thin film deposition techniques that offer chemical and geometrical versatility to realize the implementation of such thin films on an applicable scale. The drawback has until recently been a lack of available precursor chemistry that offers self-limiting growth that is fundamental to ALD. The alkali metal tert-butoxides have been shown to exhibit the necessary properties to facilitate saturating growth for Li-, Na-, K-, and Rb-containing compounds. However, the behavior of the tert-butoxides in ALD-growth has been considered difficult to unravel, with processes exhibiting limited control and low reproducibility. Very little has been reported on trends in reaction mechanisms as the mass of the alkali metal increases. Herein, we summarize the existing literature on the use of alkali metal tert-butoxides as precursors in ALD. We consider differences in the structure and behavior of the tert-butoxides as the alkali metal cation becomes heavier. In addition, we present precursor synthesis routes and key information on precursor structure, stability, and mechanistic behavior. Finally, we provide the first ever report of Cs-containing films by ALD to complement previous work on its lighter counterparts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Giant piezoelectricity in oxide thin films with nanopillar structure

High-performance piezoelectric materials are critical components for electromechanical sensors and actuators. For more than 60 years, the main strategy for obtaining large piezoelectric response has been to construct multiphase boundaries, where nanoscale domains with local structural and polar heterogeneity are formed, by tuning complex chemical compositions. We used a different strategy to emulate such local heterogeneity by forming nanopillar regions in perovskite oxide thin films. We obtained a giant effective piezoelectric coefficient d 33 , f * of ~1098 picometers per volt with a high Curie temperature of ~450°C. Our lead-free composition of sodium-deficient sodium niobate contains only three elements (Na, Nb, and O). The formation of local heterogeneity with nanopillars in the perovskite structure could be the basis for a general approach to designing and optimizing various functional materials.

Science & Technology - Other Topics↗
DOE OSTI2024

Rapid Predictions of Part Lifetimes in Corrosive Environments, Corrosion

Corrosion challenges persist throughout SNL’s mission areas. The primary difficulty lies in the fact that corrosion typically manifests as isolated, rare events, making preemptive identification exceedingly difficult. Our current strategy for addressing corrosion issues, such as anomalies and SFIs, is similarly isolated and reactive. This method is costly, time-consuming, heavily dependent on a limited number of experts, and offers minimal understanding of the overall damage distribution within the stockpile. This technical challenge is not unique to corrosion but is also prevalent in other material aging phenomena, such as tin-whisker growth in lead-free solder and fatigue failure of springs.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Coupled Gel/Seeded Growth of Cs2AgBiBr6 Single Crystals for Radiation Detection

Abstract— The all-inorganic lead free Cs2AgBiBr6 perovskite represents a highly promising environment-friendly radiation detector material. The first attempt to grow Cs2AgBiBr6 single crystals using the unique gel growth method is reported in this study. This technique enables controlled reagent diffusion in a gel medium at room temperature, fostering the growth of visible single crystals. It offers advantages over conventional methods, leading to fewer equilibrium and non-equilibrium defects and simplified execution. Interestingly, the as-grown crystals exhibited variations in size and colors within the gel matrix, indicating the influence of Bi solutes in Bi-poor and Bi-rich Cs2AgBiBr6 crystals. Once the crystals were confirmed by powder xray diffraction, a series of comprehensive material characterizations was performed. The resistivity of Cs2AgBiBr6 single crystals was measured at 1.12x107 Ω•cm. Trap density analysis yielded a value of 2.82 x1010 cm-3. The charge carrier mobility was determined to be 32.9 cm2V-1S-1, suggesting the suitability for radiation detector applications. Additional growth optimization is going on and further characterization will be reported during the presentation. Our work helps accelerate the development of lead-free perovskite materials toward radiation detector applications.

James, Ralph B.↗
DOE OSTI2025

Properties of Electronic Materials

This final technical report summarizes the research conducted under DOE Grant DE-SC0002623, "Properties of Electronic Materials," led by Principal Investigator Shengbai Zhang at Rensselaer Polytechnic Institute. Over the 16-year period, the project employed first-principles computational methods to investigate the structural, electronic, and dynamic properties of a wide range of electronic materials, with applications in energy technologies, optoelectronics, and data storage. Key areas included topological insulators, phase-change materials, graphene and two-dimensional systems, perovskites for photovoltaics, defect engineering in semiconductors, kagome lattices, and ultrafast carrier dynamics. The research resulted in 115 peer-reviewed publications, advancing fundamental understanding of material behaviors at the atomic scale and contributing to innovations in renewable energy, memory devices, and quantum materials. Findings have implications for improving energy efficiency, developing lead-free solar cells, and enabling high-speed data processing. The work has trained numerous graduate students and postdocs, fostering the next generation of computational materials scientists. The original goals were to develop theoretical models and computational tools to predict and optimize electronic properties of materials for energy applications. All objectives were accomplished, with no major departures from planned methodologies. Challenges in computational scaling were addressed through access to high-performance computing resources.

36 MATERIALS SCIENCE↗
DOE OSTI2024

A Lead‐Free Ferroelectric 2D Dion–Jacobson Tin Iodide Perovskite

2D hybrid organic–inorganic halide perovskites emerge as a new class of 2D semiconductors with the potential to combine excellent optoelectronic properties with symmetry-enabled properties such as ferroelectricity. Although many lead-based ferroelectric 2D halide perovskites are reported, there is yet to be a conclusive report of ferroelectricity in tin-based 2D perovskites. Here, the structures and properties of a new series of 2D Dion–Jacobson (DJ) Sn perovskites: (4AMP)SnI 4 , (4AMP)(MA)Sn 2 I 7 , and (4AMP)(FA)Sn 2 I 7 (4AMP = 4-(aminomethyl)piperidinium, MA = methylammonium, and FA = formamidinium), are reported. Structural characterization reveals that (4AMP)SnI 4 is polar with in-plane spontaneous polarization whereas (4AMP)(MA)Sn 2 I 7 and (4AMP)(FA)Sn 2 I 7 are centrosymmetric. Further, (4AMP)SnI 4 displays second harmonic generation (SHG) and polarization-electric field hysteresis measurements confirm it is ferroelectric with a spontaneous polarization of 10.0 µC cm −2 at room temperature. (4AMP)SnI 4 transitions into a centrosymmetric structure above 367 K. As the first direct experimental observation of the spontaneous ferroelectric polarization of a Sn-based 2D hybrid perovskite, this work opens up environmentally friendly 2D tin halide perovskites for ferroelectricity and other physical property studies.

2D↗
DOE OSTI2022

High Strain Response and Dielectric Properties of Bi 1/2 (Na 0.78 K 0.22 ) 1/2 TiO 3 Ceramics Doped with (Fe 1/2 Nb 1/2 ) 4+

Environmentally friendly piezoceramics Bi 1/2 (Na 0.78 K 0.22 ) 1/2 Ti 1-x (Fe 1/2 Nb 1/2 ) x O 3 (BNKT-FN) with FeNb (FN) ratios 0, 0.01, 0.02, 0.03 and 0.04 were synthesized via conventional solid-state reaction (CSSR). X-ray diffraction (XRD) analysis revealed that the FN complexes were completely dissolved in BNKT perovskite and the structural transition occurred from ferroelectric to relaxor state. The average grain sizes for x = 0, 0.01, 0.02, 0.03 and 0.04 were found to be 0.34 μm, 0.35 μm, 0.38 μm, 0.32 μm and 0.39 μm, respectively. It is observed that the grain size increased with the addition of FN, except for x = 0.03. Here, the coercive field (E c ) and remnant polarization (P r ) of the system were decreased with increasing FN concentration and the highest E c of 21.1 kV/cm and P r of 29.2 μC/cm 2 were noted for the base pure sample. In addition, the increase of FN content steadily broadened the dielectric anomaly at maximum dielectric constant temperature (T m ) in the BNKT-FN system. Consequently, unipolar normalized strain (S max /E max ) was found to be enhanced monotonically achieving the highest value of around 654 pm/V (x = 0.02). These properties suggest that the investigated system could be a promising eco-friendly candidate for piezoelectric actuators and many other applications requiring high piezoelectric induced strain.

25 ENERGY STORAGE↗
DOE OSTI2025

Phonon lifetimes and mode softening in cubic Cs 2 AgBiBr 6

Metal halide perovskites (MHPs) have emerged as noteworthy candidates for photovoltaic applications in recent years. Their high power-conversion efficiency is largely attributed to the structure-function relationship, which is not well understood. In this study, we examine the low-frequency phonons of the double perovskite Cs 2 AgBiBr 6 using neutron inelastic scattering. We find that the acoustic phonon lifetimes decrease from 16 to 3 ps along Γ to X, which is indicative of significant anharmonicity that contributes to the ultralow thermal conductivity. Additionally, we observe a linear temperature dependence of the square of the zone-center soft optical phonon energy, which is consistent with a weakly first-order displacive cubic-tetragonal structural phase transition. These results provide a deeper understanding of the lattice dynamics and phase transitions in MHPs as well as the effects of anharmonicity by comparison with prototypical hybrid organic-inorganic MHPs, (CH 3 NH 3 ) PbX 3 (X = Br, I).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Intrinsic Formamidinium Tin Iodide Nanocrystals by Suppressing the Sn(IV) Impurities

The long search for non-toxic alternatives to lead halide perovskites (LHPs) has shown that some compelling properties of LHPs, such as low effective masses of carriers, can only be attained in their closest Sn(II) and Ge(II) analogs, despite their tendency to oxidation. Judicious choice of chemistry allowed formamidinium tin iodide (FASnI 3 ) to reach a power conversion efficiency of 14.81% in photovoltaic devices. This progress motivated us to develop a synthesis of colloidal FASnI 3 NCs with a concentration of Sn(IV) reduced to an insignificant level and probe their intrinsic structural and optical properties. Intrinsic FASnI 3 NCs exhibit unusually low absorption coefficients of 4 x 10 3 cm -1 at the first excitonic transition, a 190 meV increase of the bandgap as compared to the bulk material, and a lack of excitonic resonances. These features are attributed to a highly disordered lattice, distinct from the bulk FASnI 3 as supported by structural characterizations and first-principles calculations.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2025

Ferroelectric Switching in Hybrid Molecular-Beam-Epitaxy-Grown BaTiO 3 Films

Molecular beam epitaxy (MBE) is a promising synthesis technique for both heterostructure growth and epitaxial integration of ferroelectric BaTiO 3 . However, direct measurement of the remnant polarization (P r ) has not been previously reported in MBE-grown BaTiO 3 films. We report the in situ growth of an all-epitaxial SrRuO 3 /BaTiO 3 /SrRuO 3 heterostructure on Nb-doped SrTiO 3 (001) substrates by hybrid MBE using metal–organic precursors. This capacitor structure consisting of 16 nm SrRuO 3 /40 nm BaTiO 3 /16 nm SrRuO 3 shows hysteretic polarization–electric field (P–E) curves with P r ∼ 15 μC cm –2 at frequencies ranging from 500 Hz to 20 kHz, after isolating the intrinsic ferroelectric response from non-ferroelectric contributions using the Positive-Up-Negative-Down (PUND) method. We hypothesize that the asymmetry in switching behavior and current leakage has origins in structural defects. Furthermore, this work opens the door to defect-engineered ferroelectric BaTiO 3 -based heterostructures grown by hybrid MBE for future electronic, photonic and spintronic applications.

SrRuO3 electrode↗
DOE OSTI2021

Real-Time Investigation of Sn(II) Oxidation in Pb-Free Halide Perovskites by X-ray Absorption and Mössbauer Spectroscopy

Sn(II) halide perovskites are a less toxic alternative to Pb-based materials in perovskite solar cells, but oxidation to Sn(IV) introduces additional degradation pathways. Improving stability requires mechanistic pictures of O 2 - and H 2 O-induced degradation and their synergy. In this work, we demonstrate that X-ray absorption spectroscopy reports the average valency of the bulk material, allowing oxidation kinetics to be measured from minutes to days. Optical and X-ray diffraction studies demonstrate the challenge of isolating oxidative degradation with techniques lacking element specificity and oxidation state sensitivity. Finally, 119Sn Mössbauer spectroscopy is presented as a lab-based technique capable of providing information on valency and speciation throughout oxidation.

14 SOLAR ENERGY↗
DOE OSTI2025

P-Type Doping of Mixed Tin–Lead Halide Perovskites Using Electron Transfer to Mo(tfd-COCF3) 3 and F 4 TCNQ

Mixed tin-lead halide perovskites are emerging as promising candidates to address the toxicity issues of lead-based perovskites and to provide additional bandgap tunability for optoelectronic applications. Electron-transfer doping offers a prospective pathway to modulate electronic properties of metal-halide perovskites, while not disturbing the underlying crystal structure. However, limited research exists comparing molecular dopants for these systems. Here, our study investigates the p-type electron-transfer doping of the mixed tin-lead halide perovskite MAPb 0.5 Sn 0.5 I 3 (MA = methylammonium) using a sequential deposition approach (perovskite film followed by dopant incorporation) and the molecular dopants F 4 TCNQ and Mo(tfd-COCF 3 ) 3 . Up to 3 orders of magnitude higher carrier density and up to 2 orders of magnitude greater conductivity are achieved relative to the undoped samples, with F 4 TCNQ and Mo(tfd-COCF 3 ) 3 demonstrating similar doping efficiencies (associated with the ratio of mobile charges added to the number of dopant molecules incorporated) of 0.031(3) % and 0.024(3) %, respectively. Differences in the doping effectiveness for a given molarity doping solution likely follow from variations in dopant incorporation within the film during the spin coating deposition step.

14 SOLAR ENERGY↗
DOE OSTI2025

Connectivity-Dependent Exciton–Phonon Coupling in Cesium Bismuth Halide Quantum Dots

Metal halide octahedra form the fundamental functional building blocks of metal halide perovskites, dictating their structures, optical properties, electronic structures, and dynamics. Here, in this study, we show that the connectivity of bismuth halide octahedra in Cs 3 Bi 2 Br 9 and Cs 3 Bi 2 I 9 quantum dots (QDs) changes with different halide elements. We use first-principles calculations to reveal the key role of the connectivity of bismuth halide octahedra on the wave function symmetry, Huang-Rhys factor, and exciton-phonon interaction strength. Following QD synthesis via a ligand-mediated transport method, the effect of connectivity is verified with transient absorption spectroscopy, where we contrast Cs 3 Bi 2 Br 9 and Cs 3 Bi 2 I 9 QD exciton dynamics. In photoexcited Cs 3 Bi 2 I 9 QDs, phonons related to the vibrational motions of face-sharing [BiI 6 ] 3- bioctahedra couple strongly to the electronic state and drive rapid carrier relaxation. Equivalent signals are not observed for photoexcited Cs 3 Bi 2 Br 9 QDs, implying a lack of phonon involvement in band-edge absorption and subsequent exciton relaxation. Our findings suggest that structural engineering can effectively tune the exciton-phonon coupling and therefore influence exciton relaxation and recombination in perovskite nanomaterials.

TDDFT↗
DOE OSTI2026

3D printed water-stable Cd-doped Cs 4 MnBi 2 Cl 12 /polylactic acid perovskite/polymer composites for high-flux X-ray scintillation

Stable and efficient X-ray scintillators are crucial for medical diagnostics, industrial, and defense applications. However, conventional scintillator technologies face a trade-off between stability, optimal performance, and sustainability. Herein, we introduce 3D-printed Cs 4 MnBi 2 Cl 12 (Pero1) and Cs 4 Cd 0.68 Mn 0.32 Bi 2 Cl 12 (Pero2) perovskite microcrystals embedded within a polylactic acid (PLA) polymer composite as X-ray scintillators, combining efficiency, stability, and sustainability. The orange luminescent perovskite powder phosphors exhibited poor water stability, which was successfully addressed through incorporation into PLA via filament extrusion and fused deposition modeling (FDM) 3D printing. The resulting composite films demonstrated remarkable water stability while maintaining uniform orange emission throughout the polymer matrix, as confirmed by 3D topography scanning and X-ray fluorescence mapping. Structural characterization revealed minimal chemical interaction between the perovskite and PLA matrix, with the composites retaining their crystalline properties. The PLA-Pero2 composite exhibited superior optical properties, with a photoluminescence quantum yield of 47%, nearly 17 times higher than that of PLA-Pero1 (2.8%), attributed to the effective suppression of non-radiative decay pathways through Cd 2+ doping. Under hard X-ray irradiation at synchrotron beamlines, both composites exhibited excellent radioluminescence, with emission peaks at 605 nm, a linear response across a wide X-ray flux range, and remarkable radiation stability, showing less than 3% intensity degradation after 600 seconds of continuous high-dose exposure. The PLA-Pero2 composite achieved a spatial resolution of 5 line pairs per millimeter and a contrast ratio of 0.255. These performance metrics, combined with the polymer's biodegradability and scalability through additive manufacturing, position PLA-based composites as a more sustainable alternative to conventional petroleum-based polymer scintillators for next-generation medical imaging, radiation monitoring, and industrial radiography applications.

3D Printing↗