Search NASA⌕ Search

SEARCH · Search NASA

Results for “level densities”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Method for estimating the density of high-level nuclear waste glass

A database of over 1100 silicate glass compositions and densities was compiled and used to evaluate the efficacy of an algorithm for estimating the density of silicate glass compositions. We sought to develop a parsimonious algorithm based on the additivity of partial molar volumes of individual oxide components weighted by their mole fraction in a glass composition. Bound molar volumes were used for oxides in which the density of the oxide bound in a glass matrix was previously determined. The bound molar volumes were known for oxides covering 97.5 mole percent of the database compositional space. The measured glass densities were plotted against the estimated glass densities and a linear regression yielded an R 2 adj. = 0.95 and a slope and intercept of approximately one and zero, respectively. This regression suggests that glass densities estimated by the algorithm, within analysis uncertainty, are equal to the measured densities of the glasses. In addition to the development of the density estimation, we corroborated many of the referenced bound molar volume data used in the parameterization of the estimation algorithm via linear regression of the individual partial molar volumes versus the inverse measured densities (specific volumes) of the glasses in the database.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2025

Performance of a dynamic single bubbler in single and two-phase immiscible liquids

Ensuring nonproliferation and safeguards of special nuclear materials (SNM) is a critical aspect of advancing the nuclear fuel cycle. Traditional bubbler systems used to estimate liquid levels and densities in nuclear recycling processes have limitations, particularly in harsh environments where dip-tube corrosion and buildup necessitate frequent maintenance and recalibration. This study explores the Dynamic Single Bubbler (DSB) method, which utilizes a single dip-tube attached to a linear actuator to estimate liquid properties dynamically. This approach is extended to estimate liquid-liquid interfaces in immiscible liquids and employs a linear regression method to reduce uncertainties and improve accuracy. The DSB method achieved density estimate uncertainties of less than 0.5% and surface level estimate uncertainties typically under 0.5%, across various fluids including water, acetone, methanol, mineral oil, glycerol, and aqueous salt solutions. Results indicate that the DSB method provides accurate and robust estimates of liquid density and surface levels with minimal maintenance and without the need for calibration. Additionally, the method's applicability to immiscible liquids and various dip-tube geometries was demonstrated, showing promise for widespread use in nuclear and other industrial applications.

98 - NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL↗
DOE OSTI2022

Dissipative Reactions with Intermediate-Energy Beams: A Novel Approach to Populate Complex-Structure States in Rare Isotopes

A novel pathway for the formation of multiparticle-multihole excited states in rare isotopes is reported from highly energy- and momentum-dissipative inelastic-scattering events measured in reactions of an intermediate-energy beam of 38 Ca on a Be target. The negative-parity, complex-structure final states in 38 Ca are observed following the in-beam γ-ray spectroscopy of events in the 9 Be( 38 Ca, 38 Ca + γ)X reaction in which the scattered projectile loses longitudinal momentum of order Δp || = 700 MeV/c. Here, the characteristics of the observed final states are discussed and found to be consistent with the formation of excited states involving the rearrangement of multiple nucleons in a single, highly energetic projectile-target collision. Unlike the far-less-dissipative, surface-grazing reactions usually exploited for the in-beam γ-ray spectroscopy of rare isotopes, these more energetic collisions appear to offer a practical pathway to nuclear-structure studies of more complex multiparticle configurations in rare isotopes—final states conventionally thought to be out of reach with high-luminosity fast-beam-induced reactions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Discovery of the new isotope 251 Lr and the α-decay fine structure in 253 L

The products of the 203, 205 Tl ( 50 Ti, 2n) fusion-evaporation reactions were studied using the recently commissioned Argonne Gas-Filled Analyzer at Argonne National Laboratory. Two α-decay activities with energies of 9210(19) and 9246(19) keV and half-lives of $42^{+42}_{-14}$ and $24.4^{+7.0}_{-4.5}$ ms were observed which were followed by the known α decays of 247 Md and 243 Es . They are interpreted as originating from the 1/2 ⁻ [521] and 7/2 ⁻ [514] single-proton Nilsson states in the hitherto unknown isotope 251 Lr . From the measured Q α values the 1/2 ⁻ level was placed 117(27) keV above the 7/2 - level in 251 Lr in contrast to 255 Lr where the 1/2 ⁻ level is the lowest. Also, the α decay of 253 Lr was studied in more detail and a new α line at 8660(20) keV was found and a new half-life value of 2.46(32) s for an isomeric state in 253 Lr was measured. The 251, 253, 255 Lr Q α values were compared with predictions of various mass models. The relative energies of the 1/2 ⁻ [521] and 7/2 ⁻ [514] single-proton Nilsson states in 251, 253, 255 Lr isotopes were compared with results of the cranking shell model with pairing treated using the particle-number-conserving method. The level separation and, in particular, the level order change between 251 Lr and 255 Lr was reproduced only when the hexacontetrapole deformation ϵ 6 was included in the calculations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Exploiting dissipative reactions to perform in-beam γ-ray spectroscopy of the neutron-deficient isotopes 38,39 Ca

The neutron-deficient Ca isotopes continue to attract attention due to their importance for testing isospin symmetry and their relevance in capture reactions of interest for nova nucleosynthesis and the shape of light curves in Type I x-ray bursts. To date, spectroscopic information on 38,39 Ca is largely limited to data on lower-spin excited states. Here, we report in-beam γ-ray spectroscopy of complementary higher-spin, complex-structure states in 39 Ca populated in fast-beam-induced, momentum-dissipative processes leading to neutron pickup onto excited configurations of the projectile, 9 Be( 38 Ca*, 39 Ca + γ)X. Such a dissipative reaction was recently characterized for the case of inelastic scattering of 38 Ca off 9 Be, 9 Be( 38 Ca, 38 Ca + γ)X. Additional data and discussion on the nuclear structure of 38 Ca is also presented. Furthermore, an explanation for the more-complex-structure states, populated with small cross sections in one-nucleon knockout reactions, and observed in the tails of their longitudinal momentum distributions, is also offered.

20 ≤ A ≤ 38↗
DOE OSTI2026

Performance and transport in the ARC tokamak

The ARC TM tokamak, a high-field (𝐵 𝑇 = 11.4 T) fusion power plant, under development by Commonwealth Fusion Systems, is studied using a suite of integrated modelling tools to predict its fusion power generation (𝑃𝑓⁡𝑢⁢𝑠), transport and confinement properties. Analysis is based off an ARC operational point scoped first with zero-dimensional (0-D) plasma operational contour (POPCON) modelling to produce 1.13 GW of fusion power. A suite of integrated modelling tools (TRANSP, ASTRA and TORAX) were applied to predict the performance and kinetic profiles of the ARC design point, yielding a range of predicted performance spanning from ∼900 to 1300 MW in rough quantitative agreement with POPCON predictions. The sensitivity of these results to uncertain modelling inputs was probed using scans of pedestal boundary conditions around EPED-predicted values (total pressure and temperature ratios), tungsten concentration and seperatrix density around their nominal assumptions. Pedestal pressure and pedestal top (𝑇 𝑖 /𝑇 𝑒 ) play a large role in 1.5-dimensional performance predictions, able to modify the predicted 𝑃 𝑓⁡𝑢⁢𝑠 by a factor of 2 within reasonable assumptions. High-fidelity core nonlinear gyrokinetic profile predictions, performed using CGYRO (Candy et al. 2016 J. Comput. Phys., vol. 324, pp. 73–93) coupled with the PORTALS (Rodriguez-Fernandez et al. 2024 Nucl. Fusion, vol. 64, 076034; Phys. Plasmas, vol. 31, 2024, 062501) framework, yield substantially lower performance (𝑃 𝑓⁡𝑢⁢𝑠 =677 MW) compared with 0-D and medium-fidelity modelling for nominal assumptions, showing that there is non-negligible uncertainty between models and that future work on SPARC may help resolve discrepancies. Lower overall performance results from significantly reduced volume-averaged densities and temperatures, along with reduced levels of density and temperature peaking. Turbulence and transport are largely dominated by ion temperature gradient across the profile, confirmed by both linear stability and the response of the nonlinear fluxes to changes in gradients, with some impact of kinetic ballooning modes in the deep core. This work represents one of the most complete scoping of potential fusion power plant conditions performed to date. The extensive integrated modelling provides confidence in ARC performance approaching 1 GW, while nonlinear gyrokinetic modelling results in open questions into the physics of density and temperature peaking in fusion-power-plant-relevant operational space. A discussion of results and the role that the SPARC tokamak (Creely et al. 2020 J. Plasma Phys., vol. 86, 865860502) will play in informing ARC design, performance and operation is presented.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

On the quality of tape-cast thin films of sulfide electrolytes for solid-state batteries

All-solid-state lithium batteries (ASSLBs) have the potential to increase energy density, improve safety, and allow for lower manufacturing costs compared to conventional, liquid-based Li-ion batteries. The thickness of solid electrolyte (SE) layer dictates the cell-level energy density and it is desirable to make the SE layer as thin as possible while maintaining uniformity and defect-free. Manufacturing a high- quality, thin sulfide SE layer at large-scale, however, is challenging. Previous studies have addressed the compatibility of materials used for manufacturing thin sulfide SE films, paving the way for further investigation of processing conditions and film quality. Here we report a strong correlation between the solid loading of dispersions and the quality of tape-casted thin sulfide SE films. We also demonstrate a method for quantifying the quality of thin SE films by observing both pin-hole defects and larger heterogeneous agglomerations of particles in the films. Our thin sulfide SE films containing ~5 wt% binder are defect-free and show similar ionic conductivity compared to a cold-pressed, binder-free, thick SE pellet, resulting in an ~11X reduction of area specific resistance. Here, this work on the solid loading of the dispersion used in a scalable tape casting process provides insight for manufacturing high-quality, thin sulfide SE films and to increase the cell-level energy density of ASSLB.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Configuration mixing in 28 Mg and the 26 Mg (t,p) 28 Mg reaction

We have studied the 26 Mg(t,p) 28 Mg reaction. The nucleus 28 Mg lies between 24 Mg and 32 Mg, the latter of which is central to the “island of inversion” characterized by low-lying neutron fp-shell configurations. The present results show that the second-excited 0 + state in 28 Mg contains large fp-shell occupation for the neutrons. The experiment was performed in inverse kinematics using the HELIcal Orbit Spectrometer (HELIOS) at Argonne National Laboratory. Shell-model calculations using the SDPF-MU interaction yielded level energies and two-neutron transfer amplitudes that were used in one-step distorted-wave Furthermore, born approximation calculations to provide theoretical predictions of the proton angular distributions. In many, but not all cases, the data were in good agreement with theoretical predictions.

20 ≤ A ≤ 38↗
DOE OSTI2020

Recent Developments in the General Atomic and Molecular Electronic Structure System

A discussion of many of the recently implemented features of GAMESS (General Atomic and Molecular Electronic Structure System) and LibCChem (the C++ CPU/GPU library associated with GAMESS) is presented. These features include fragmentation methods like the fragment molecular orbital, effective fragment potential and effective fragment molecular orbital methods, hybrid MPI/OpenMP approaches to Hartree-Fock and resolution of the identity second order perturbation theory. Many new coupled cluster theory methods have been implemented in GAMESS, as have multiple levels of density functional/tight binding theory. The role of accelerators, especially graphical processing units, is discussed in the context of the new features of LibCChem, as is the associated problem of power consumption as the power of computers increases dramatically. The process by which a complex program suite like GAMESS is maintained and developed is considered. Future developments are briefly summarized.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2024

Tunneling magnetoresistance in MgO tunnel junctions with Fe-based leads in empirically corrected density functional theory

The minority-spin Fe/MgO interface states are at the Fermi level in density functional theory (DFT), but experimental evidence and GW calculations place them slightly higher in energy. This small shift can strongly influence tunneling magnetoresistance (TMR) in junctions with a thin MgO barrier and its dependence on the concentration of Co in the electrodes. Here, in this study, an empirical potential correction to DFT is introduced to shift the interface states up to match the tunnel spectroscopy data. With this shift, TMR in Fe/MgO/Fe junctions exceeds 800% and 3000% at 3 and 4 monolayers (ML) of MgO, respectively. We further consider the effect of alloying of the Fe electrodes with up to 30% Co or 10% V, treating them in the coherent potential approximation (CPA). Alloying with Co broadens the interface states and brings a large incoherent minority-spin spectral weight to the Fermi level. Alloying with V brings the minority-spin resonant states close to the Fermi level. However, in both cases the minority-spin spectral weight at the Fermi level resides primarily at the periphery of the Brillouin zone, which is favorable for spin filtering. Using convolutions of k II -resolved barrier densities of states calculated in CPA, it is found that TMR is strongly reduced by alloying with Co or V but still remains above 500% at 4 ML of MgO up to 30% of Co or 5% V. At 5 ML, the TMR increases above 1000% in all systems considered. However, while TMR declines sharply with increasing bias up to 0.2 eV in the tunnel junctions with pure Fe leads, it remains almost constant up to 0.5 eV if leads are alloyed with Co.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2022

Practically Accessible All-Solid-State Batteries Enabled by Organosulfide Cathodes and Sulfide Electrolytes

The combination of organic electrode materials and sulfide electrolytes is expected to enable the development of all-solid-state organic batteries featuring high energy density and long-term sustainability. In this work, thiuram hexasulfide is reported as a low-cost and high-capacity organic cathode for solid-state batteries based on sulfide electrolytes, delivering a capacity of ~600 mAh g -1 and retaining 80.8 % capacity after 500 cycles. An electrochemically reversible change of the cathode interface was revealed upon cycling. Full cell displays an oscillating stress change up to 0.6 MPa during cycling, predominated by the anode side. The energy density is 1140 Wh kg -1 at the material level and 376 Wh kg -1 at the electrode level, which are among the best-reported organic cathodes to date. A high areal capacity of 10.4 mAh cm -2 is reached with a high mass loading cathode. A dry-film approach is further explored to manufacture sheet-type cells. Free-standing electrolyte film is merely ~48 μm thick and demonstrates an ultralow areal resistance of 3.9 Ω cm 2 , significantly boosts the cell-level energy density and reduces the cell internal resistance.

25 ENERGY STORAGE↗
DOE OSTI2023

Effects of land-based wind turbine upsizing on community sound levels and power and energy density

Multiple technological, social, and market factors of wind power are evolving rapidly. Most notably, significant wind turbine scaling is occurring and is forecasted to continue. While the larger turbines expected to be deployed in the future are more powerful and efficient, they are also expected to operate at higher sound levels and require larger setbacks than those installed in the last decade. These sometimes-competing deployment trends and impacts cannot be understood via simple extrapolations of past trends. This study analyzes the effect of these future larger turbines on wind turbine micro-siting, project-level power and energy density, and community noise impacts. Due to their taller heights, larger rotors, and higher sound power levels, future wind turbines will require larger setbacks from homes and greater inter-turbine spacing, resulting in fewer turbines deployed for a given land area. This research finds these changes more than offset the effect of the higher turbine sound emissions, significantly decreasing the average sound levels that wind plant hosting communities experience. Yet, simultaneously, plant layouts using future turbine designs also result in projects with higher installed capacities and annual energy output for a given land area. These increases will likely lead to increased tax benefits and local income in the community. The deployment of fewer turbines on a smaller number of parcels could have implications on siting flexibility and landowner payments.

17 WIND ENERGY↗
DOE OSTI2020

Accurate prediction of core-level spectra of radicals at density functional theory cost via square gradient minimization and recoupling of mixed configurations

State-specific orbital optimized approaches are more accurate at predicting core-level spectra than traditional linear-response protocols, but their utility had been restricted due to the risk of "variational collapse" down to the ground state. We employ the recently developed square gradient minimization algorithm to reliably avoid variational collapse and study the effectiveness of orbital optimized density functional theory (DFT) at predicting second period element 1s core-level spectra of open-shell systems. Several density functionals (including SCAN, B3LYP, and ωB97X-D3) are found to predict excitation energies from the core to singly occupied levels with high accuracy (≤0.3 eV RMS error) against available experimental data. Higher excited states are, however, more challenging by virtue of being intrinsically multiconfigurational. We thus present a configuration interaction inspired route to self-consistently recouple single determinant mixed configurations obtained from DFT, in order to obtain approximate doublet states. This recoupling scheme is used to predict the C K-edge spectra of the allyl radical, the O K-edge spectra of CO + , and the N K-edge of NO 2 with high accuracy relative to experiment, indicating substantial promise in using this approach for the computation of core-level spectra for doublet species [vs more traditional time dependent DFT, equation of motion coupled cluster singles and doubles (EOM-CCSD), or using unrecoupled mixed configurations]. Finally, we also present general guidelines for computing core-excited states from orbital optimized DFT.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

A Combined Machine Learning and High-Energy X-ray Diffraction Approach to Understanding Liquid and Amorphous Metal Oxides

Determining the structure-property relations of liquid and amorphous metal oxides is challenging, due to their variable short-range order and polyhedral connectivity. To predict chemically realistic structures, we have developed a Machine Learned, Gaussian Approximation Potential (GAP) for HfO 2 , with a focus on enhanced sampling of the training database and accurate density functional theory calculations. By using training datasets for the GAP model at the level of Density Functional Theory-Strongly Constrained and Appropriately Normed (DFT-SCAN) level of theory, our results show that the topology of both the low viscosity liquid and the amorphous form are dominated by edge-shared chains and small corner-shared rings of polyhedra. This topology is shown to be consistent with the structure of other liquid and amorphous transition metal oxides of variable ion size, such as TiO 2 and ZrO 2 . Current limitations of the ML-GAP modeling method for obtaining glass structures and future perspectives are also discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Thermochemical Data Fusion Using Graph Representation Learning

Large databases are required for “Big Data” applications in catalysis and materials science. Thermochemical databases can be created by combining data from various sources and by correcting low-fidelity datasets to higher accuracy with minimal computation. To achieve this “data fusion”, thermochemical quantities of interest, calculated at various levels of density functional theory (DFT), need to be mapped to the same, high levels of theory. In this work, a graph theoretical, statistical framework is proposed for such tasks. Subgraph frequencies are shown to provide a natural representation for learning these fusion maps. The maps are linear and are learnt with automated descriptor selection. Using a dataset of as few as ~1% from the QM9 database of 133,885 molecules, these models can predict multiple thermochemical quantities at a higher level of theory with an accuracy of 1 kcal/mol. Here, the method is explainable, generalizable, and provides a diagnostic tool for outlier identification

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Understanding of three different polyvinylpyrrolidone (PVP) based battery binders blends on graphene surfaces from first principles via DFT simulations

Binders play a crucial role in binding electrodes, current collectors, and conductive agents during battery manufacturing. The selection of the binders and their blends considerably affect various properties such as mechanical durability, adhesion performance, ionic/electronic conductivities, and solid electrolyte interface stability for lithium-ion batteries. In this work, polyvinylidene di-fluoride (PVDF), polyacrylic acid (PAA), polyvinylpyrrolidone (PVP), and lithiated polyacrylic acid (Li-PAA) were selected as the model binders, and their blends were studied on graphene surfaces. Further, among them, PVDF is hardly soluble in water unlike the other binders, so in practice, the blend of PVP:PVDF is not thought to be a proper combination. However, the PVP:PVDF binder has also been included because the purpose of this work is to calculate several electronic properties such as binding energies, intermolecular interaction energies, bond critical points, electron density, and the Laplacian of electron density at critical bonding regions of all these blends at the molecular level via density functional theory (DFT) simulations in order to evaluate and compare how is the interaction strength and bonding type of three different lithium-ion batteries (LIBs) binder blends on graphene surfaces. Most stable binder pairs and their binding mechanisms on graphene surfaces were studied. The delocalization of lithium in Li-PAA was studied with the presence of water.

25 ENERGY STORAGE↗
DOE OSTI2021

Computational Fermi Level Engineering and Doping-Type Conversion of Ga2O3 Via Three-Step Processing

Ga2O3 is being actively explored for power electronics, deep-ultraviolet optoelectronics, and other applications due to its ultra-wide bandgap and low projected fabrication cost of large-size and high-quality crystals. N-type doping of Ga2O3 can be achieved and tuned, but p-type doping faces fundamental obstacles due to deep character of acceptor levels and polaron transport of resulting holes. However, successful engineering of Ga2O3 based devices requires critical control of doping density, Fermi level position, and free carrier concentration, providing opportunities for predictive process simulation. We use first-principles defect theory and defect equilibrium calculations to simulate a 3-step growth-annealing-quench protocol for hydrogen assisted Mg doping in Ga2O3, taking into account the hydrogen-oxygen-water gas phase equilibrium. We predict type conversion to a net p-type regime following O-rich annealing after growth under reducing conditions in the presence of H2. This process is similar to the Mg acceptor activation by H removal in GaN. We show that there is an optimal temperature that maximizes the net acceptor density during the equilibrium annealing step for a given Mg doping level. Quenching of non-equilibrium annealed samples then results in a Fermi level EF below mid-gap down to about EV +1.5 eV, creating a significant number of uncompensated neutral MgGa0 acceptors. The resulting free hole concentration in quenched samples is very low (109 – 1012 cm-3) due to deep energy level of these Mg acceptors, but this type converted Ga2O3 material can create a significant built-in field in a p-n junction with an adjoining n-type material. Additionally, the electron concentration is greatly suppressed in such acceptor-doped Ga2O3, which could enable the use as a current blocking layer to fabricate normally-off (enhancement-mode) vertical Ga2O3 based metal-oxide-semiconductor field effect transistors (MOSFETs), and as a guard ring for edge termination in MOSFETs and Schottky barrier diodes (SBDs) with increased breakdown voltage.

CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSICS,M↗
DOE OSTI2022

Long–Cycling Sulfide–Based All–Solid–State Batteries Enabled by Electrochemo–Mechanically Stable Electrodes

Anode significantly determines the energy density of all-solid-state Lithium batteries (ASLBs). Silicon (Si) and Lithium (Li) metal are two of the most attractive anodes because of their ultrahigh theoretical capacities. However, most investigations focus on Li metal; the great potential of Si is underrated. This study investigates Si anode's stability, processability, and cost in ASLBs and compares them with Li metal. Moreover, the single-crystal LiNi 0.8 Co 0.1 Mn 0.1 O 2 is stabilized with a lithium silicate (Li 2 SiO x ) through a scalable sol-gel method. ASLBs with a cell-level energy density of 285 Wh kg -1 are obtained through sandwiching Si anode, thin sulfide solid-state electrolyte membrane, and interface stabilized LiNi 0.8 Co 0.1 Mn 0.1 O 2 . The full cell delivered a high capacity of 145 mAh g -1 at C/3 and maintained stability for 1000 cycles. This work inspires commercializing the ASLBs on a large scale with exciting manufacturing lines for large-scale, safe, and economical energy storage.

25 ENERGY STORAGE↗