SEARCH · Search NASA

Results for “linear quadratic regulator”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

All sources NASA NTRS DOE OSTI

NASA NTRS1985

Development of a flight test maneuver autopilot for an F-15 aircraft

An autopilot can be used to provide precise control to meet the demanding requirements of flight research maneuvers with high-performance aircraft. This paper presents the development of control laws for a flight test maneuver autopilot for an F-15 aircraft. A linear quadratic regulator approach is used to develop the control laws within the context of flight test maneuver requirements by treating the maneuver as a finite time tracking problem with regulation of state rates. Results are presented to show the effectiveness of the controller in insuring acceptable aircraft performance during a maneuver.

Alag, G. S.↗

NASA NTRS1986

The development of optimal control laws for orbiting tethered platform systems

A mathematical model of the open and closed loop in orbit plane dynamics of a space platform-tethered-subsatellite system is developed. The system consists of a rigid platform from which an (assumed massless) tether is deploying (retrieving) a subsatellite from an attachment point which is, in general, offset from the platform's mass center. A Langrangian formulation yields equations describing platform pitch, subsatellite tetherline swing, and varying tether length motions. These equations are linearized about the nominal station keeping motion. Control can be provided by both modulation of the tether tension level and by a momentum type platform-mounted device; system controllability depends on the presence of both control inputs. Stability criteria are developed in terms of the control law gains, the platform inertia ratio, and tether offset parameter. Control law gains are obtained based on linear quadratic regulator techniques. Typical transient responses of both the state and required control effort are presented.

Bainum, P. M.↗

NASA NTRS1986

Flight test maneuver modeling and control

The use of automated flight test schemes decrease the aircraft flight testing time and pilot work load while enhancing the data quality. Two major elements involved in developing such an automated technique are maneuver modeling to generate command histories from the maneuver specifications and the synthesis of control systems to track these command histories. This paper describes the maneuver modeling for eight flight test trajectories. The control system synthesis with Kosut's suboptimal minimum error excitation linear quadratic regulator approach is presented. The closed-loop simulation results are given.

Menon, P. K. A.↗

NASA NTRS1985

Robust state estimation with imperfect sensors

Robustness properties of extended Kalman-type filters are investigated for time-varying plants when nonlinearities or linear dynamics are present at the plant input and output. Sufficient conditions for the asymptotic stability (of the state estimation error) in the absence of noise are obtained when the nonlinearities or the linear dynamics are perfectly known. When the nonlinearities are known only within bands of uncertainty, the estimation error is shown to be ultimately bounded under certain conditions. The results obtained highlight the robustness properties of such filters, which are similar to, but not exact duals of those of linear quadratic regulators.

Joshi, S. M.↗

NASA NTRS1986

Integrated aeroservoelastic tailoring of lifting surfaces

An approach to the integration of two design activities, structural design and active control design, for a highly idealized aeroservoelastic system is presented. The particular design goal for this study is the maximization of the stable airspeed envelope of an idealized model of an aeroservoelastic system through rational and systematic variation of structural and control design parameters. The steady-state linear quadratic regulator is used to model the control subsystem; the structural subsystem is assigned characteristic design parameters, such as shear center position. The application of the procedure described here produces optimally controlled structures with stability characteristics superior to those of open-loop and initial closed-loop designs.

Zeiler, T. A.↗

NASA NTRS1986

A linear quadratic tracker for Control Moment Gyro based attitude control of the Space Station

The paper discusses a design for an attitude control system for the Space Station which produces fast response, with minimal overshoot and cross-coupling with the use of Control Moment Gyros (CMG). The rigid body equations of motion are linearized and discretized and a Linear Quadratic Regulator (LQR) design and analysis study is performed. The resulting design is then modified such that integral and differential terms are added to the state equations to enhance response characteristics. Methods for reduction of computation time through channelization are discussed as well as the reduction of initial torque requirements.

Kaidy, J. T.↗

NASA NTRS1986

The development of optimal control laws for orbiting tethered platform systems

A mathematical model of the open and closed loop in-orbit plane dynamics of a space platform-tethered-subsatellite system is developed. The system consists of a rigid platform from which an (assumed massless) tether is deploying (retrieving) a subsatellite from an attachment point which is, in general, offset from the platform's mass center. A Lagrangian formulation yields equations describing platform pitch, subsatellite tether-line swing, and varying tether length motions. These equations are linearized about the nominal station keeping motion. Control can be provided by both modulation of the tether tension level and by a momentum type platform-mounted device; system controllability depends on the presence of both control inputs. Stability criteria are developed in terms of the control law gains, the platform inertia ratio, and tether offset parameter. Control law gains are obtained based on linear quadratic regulator techniques. Typical transient responses of both the state and required control effort are presented.

Bainum, P. M.↗

NASA NTRS1986

Linear-quadratic stationkeeping for the STS Orbiter

An automatic controller for Space Shuttle Orbiter stationkeeping or formationkeeping is presented. The controller uses a feed-forward loop for precise control at non-equilibrium set points, and a discrete-time linear quadratic regulator for disturbance rejection. Selection of sample time and quadratic cost matrices is done to provide good limit cycling performance in the presence of sensor noise and a control threshold nonlinearity. Large position changes are effected by feed-forward of a minimum fuel or straightline maneuver path. Results show that 20 ft precision can be achieved using current sensors, and that 2 ft precision would be possible with enhanced sensors.

Redding, D. C.↗

NASA NTRS1986

Optimal control laws for microburst encounter

Simplified structures for longitudinal control laws that reduce an aircraft's response to the strong head-tailwind and downdraft variations associated with microbursts are presented. They are based on non-zero-set-point linear-quadratic regulators that command throttle setting and angle of attack as functions of velocity and flight path angle, and they can incorporate direct measurements of the wind profile if available. Selection of cost functions to be minimized by feedback control has been aided by a prior study of classical control laws and exact nonlinear-optimal flight paths through realistic microburst wind profiles. The resulting optimal control laws have an adaptive, dual-mode structure that can be implemented either in flight-director logic or in an autopilot.

Stengel, R. F.↗

NASA NTRS1986

A numerical algorithm for optimal feedback gains in high dimensional LQR problems

A hybrid method for computing the feedback gains in linear quadratic regulator problems is proposed. The method, which combines the use of a Chandrasekhar type system with an iteration of the Newton-Kleinman form with variable acceleration parameter Smith schemes, is formulated so as to efficiently compute directly the feedback gains rather than solutions of an associated Riccati equation. The hybrid method is particularly appropriate when used with large dimensional systems such as those arising in approximating infinite dimensional (distributed parameter) control systems (e.g., those governed by delay-differential and partial differential equations). Computational advantage of the proposed algorithm over the standard eigenvector (Potter, Laub-Schur) based techniques are discussed and numerical evidence of the efficacy of our ideas presented.

Banks, H. T.↗

NASA NTRS1986

The application of quadratic optimal cooperative control synthesis to a CH-47 helicopter

A control-system design method, Quadratic Optimal Cooperative Control Synthesis (CCS), is applied to the design of a Stability and Control Augmentation Systems (SCAS). The CCS design method is different from other design methods in that it does not require detailed a priori design criteria, but instead relies on an explicit optimal pilot-model to create desired performance. The design model, which was developed previously for fixed-wing aircraft, is simplified and modified for application to a Boeing Vertol CH-47 helicopter. Two SCAS designs are developed using the CCS design methodology. The resulting CCS designs are then compared with designs obtained using classical/frequency-domain methods and Linear Quadratic Regulator (LQR) theory in a piloted fixed-base simulation. Results indicate that the CCS method, with slight modifications, can be used to produce controller designs which compare favorably with the frequency-domain approach.

Townsend, Barbara K.↗

NASA NTRS1986

A rotorcraft flight/propulsion control integration study

An eclectic approach was taken to a study of the integration of digital flight and propulsion controls for helicopters. The basis of the evaluation was the current Gen Hel simulation of the UH-60A Black Hawk helicopter with a model of the GE T700 engine. A list of flight maneuver segments to be used in evaluating the effectiveness of such an integrated control system was composed, based on past experience and an extensive survey of the U.S. Army Air-to-Air Combat Test data. A number of possible features of an integrated system were examined and screened. Those that survived the screening were combined into a design that replaced the T700 fuel control and part of the control system in the UH-60A Gen Hel simulation. This design included portions of an existing pragmatic adaptive fuel control designed by the Chandler-Evans Company and an linear quadratic regulator (LQR) based N(p) governor designed by the GE company, combined with changes in the basic Sikorsky Aircraft designed control system. The integrated system exhibited improved total performance in many areas of the flight envelope.

Ruttledge, D. G. C.↗

NASA NTRS1986

Controlling Flexible Manipulators, an Experimental Investigation

Lightweight, slender manipulators offer faster response and/or greater workspace range for the same size actuators than tradional manipulators. Lightweight construction of manipulator links results in increased structural flexibility. The increase flexibility must be considered in the design of control systems to properly account for the dynamic flexible vibrations and static deflections. Real time control of the flexible manipulator vibrations are experimentally investigated. Models intended for real-time control of distributed parameter system such as flexible manipulators rely on model approximation schemes. An linear model based on the application of Lagrangian dynamics to a rigid body mode and a series of separable flexible modes is examined with respect to model order requirements, and modal candidate selection. Balanced realizations are applied to the linear flexible model to obtain an estimate of appropriate order for a selected model. Describing the flexible deflections as a linear combination of modes results in measurements of beam state, which yield information about several modes. To realize the potential of linear systems theory, knowledge of each state must be available. State estimation is also accomplished by implementation of a Kalman Filter. State feedback control laws are implemented based upon linear quadratic regulator design.

Hastings, Gordon Greene↗

NASA NTRS1987

Multi-input multi-output system control for experimental aircraft

Results from the synthesis of control laws for an advanced short takeoff aircraft in a low-speed approach flight condition are given. Two of four candidate synthesis techniques are reported: direct eigenspace assignment and explicit model following via a linear quadratic regulator (LQR) formulation. A fundamental objective of this work is to obtain low-order feedback compensators, synthesized via the above techniques, and the judicious use of state estimation, thus allowing the use of a reasonable number of sensors for feedback.

Schmidt, David K.↗

NASA NTRS1987

High speed, precision motion strategies for lightweight structures

Abstracts of published papers and dissertations generated during the reporting period are compiled. Work on fine motion control was completed. Specifically, real time control of flexible manipulator vibrations were experimentally investigated. A linear model based on the application of Lagrangian dynamics to a rigid body mode and a series of separable flexible modes was examined with respect to model order requirements, and modal candidate selection. State feedback control laws were implemented based upon linear quadratic regulator design. Specification of the closed loop poles in the regulator design process was obtained by inclusion of a prescribed degree of stability in the manipulator model. Work on gross motion planning and control is also summarized. A systematic method to symbolically derive the full nonlinear dynamic equations of motion of multi-link flexible manipulators was developed.

Book, Wayne J.↗

NASA NTRS1986

The dynamics and control of a space platform connected to a tethered subsatellite

A mathematical model of the open and closed loop dynamics of a space tethered-platform-subsatellite system (TPS) is developed. The TPS consists of a rigid platform from which an (assumed massless) tether is deploying a subsatellite from an attachment point which is offset from the mass center of the platform. Control is provided by modulation of the tension level in the tether and by momentum-type platform-mounted devices. Control-law gains are obtained based on linear quadratic regulator techniques. Typical transient responses are presented.

Fan, R.↗

NASA NTRS1986

Synthesis of control laws for optimally designed large space structures

In this study, the vibration control of large space structures using the linear quadratic regulator technique is investigated. Emphasis is made on the control of both optimally designed structures and also the original (uniform) structures using the cantilever beam as an example. The open loop and closed loop eigenvalues are compared and the transient responses are obtained to determine the effectiveness of the control system design.

Satyanarayana, K.↗

NASA NTRS1987

The application of quadratic optimal cooperative control synthesis to a CH-47 helicopter

A control-system design method, quadratic optimal cooperative control synthesis (CCS), is applied to the design of a stability and control augmentation system (SCAS). The CCS design method is different from other design methods in that it does not require detailed a priori design criteria, but instead relies on an explicit optimal pilot-model to create desired performance. The design method, which was developed previously for fixed-wing aircraft, is simplified and modified for application to a Boeing CH-47 helicopter. Two SCAS designs are developed using the CCS design methodology. The resulting CCS designs are then compared with designs obtained using classical/frequency-domain methods and linear quadratic regulator (LQR) theory in a piloted fixed-base simulation. Results indicate that the CCS method, with slight modifications, can be used to produce controller designs which compare favorably with the frequency-domain approach.

Townsend, Barbara K.↗