Search NASA⌕ Search

SEARCH · Search NASA

Results for “low-gravity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS1980

Ultraviolet colors of W Ursae Majoris - Gravity darkening, temperature differences, and the cause of W-type light curves

The paper presents photometry of the prototype W UMa binary system in three ultraviolet bands with the ANS satellite. It was found that W UMa has low-gravity darkening beta of 0.03; that temperature differences between the components not established by gravity darkening are insignificant; and that the bolometric albedo is not very large. It was also found that W UMa is limb-darkened in the ultraviolet region, and that the inner hemisphere of the less massive component is hotter than that predicted by gravity darkening and the reflection effect. It was concluded that about 20% of the surface area of the component responsible for large gravity darkening is covered by dark spots distributed uniformly in the longitudinal direction. An observational value of the convective darkening exponent of 0.054 plus or minus 0.02 is proposed.

Eaton, J. A.↗
NASA NTRS1982

Materials Processing in Space

A report describes investigations of materials processing in low-gravity environment. Ultimately, research could lead to new commercially-applicable materials and processes and to an understanding of constraints imposed by gravity. NASA-supported work is carried out in 46 academic, industrial, and Government laboratories, and covers a number of areas. An overview is given of objective and current state of development for over 100 tasks.

Naumann, R. J.↗
NASA NTRS1981

Measurement of forces due to liquid motion in a propellant tank

This paper presents the results of a study to develop an analytical model capable of predicting the forces acting on a tank caused by large-amplitude propellant motion. This effort contributed to an analysis of the influence of propellant dynamics on separation of the External Tank from the space shuttle orbiter. This paper is concerned with an experimental investigation that aided in development and verification of the analytical model. A scaling approach was developed that allowed the liquid motion to be simulated in subscale tanks. Liquid reorientation forces were measured using two test systems. One operated in the low-gravity environment produced in a drop tower and the second operated aboard the KC-135 'zero-g' test aircraft. The manner of liquid motion, influence of various factors, and the measured forces are discussed.

Tegart, J. R.↗
NASA NTRS1981

Containerless undercooling and solidification in drop tubes

A containerless low-gravity environment, produced within a 32 m drop tube apparatus, has been used to undercool and solidify metals, alloys or glasses by eliminating crucible induced nucleation processes. Niobium droplets with diameters in the range of 2 to 5 mm have been undercooled by 525 K which corresponds to the maximum undercooling reported by Turnbull and others on fine dispersions of low melting point metals. Solidification at large undercooling resulted in single crystalline spheres with the formation of interdendritic shrinkage channels on the sample surface rather than interior shrinkage cavities. The grain refinement as observed for Ni samples undercooled and solidified in fused silica crucibles does not occur in free-falling drops of Nb. A calculated solidification speed of undercooled Nb is compared to Ni. A solidification speed of 320 m/s is found for the Nb drops. This solidification speed is greater than or comparable to the solidification speeds calculated in splat cooled samples. Thus, a drop tube apparatus can be useful in the preparation and study of high temperature metastable compounds or alloys in bulk form.

Lacy, L. L.↗
NASA NTRS1981

Avenues and incentives for commercial use of a low-g environment

The processing of materials in a low-gravity (low-g) or microgravity environment is investigated by NASA for scientific and commercial utilization, and process and product development. The elimination of gravity is shown to create unique materials, and improve ground-based processes, such as convection, sedimentation, buoyancy, and containerless processing. Commercial applications are discussed, including the manufacturing of silicon ribbon, turbine blades, and various pharmaceuticals in space. Commercial incentives and needs are also discussed, including the technical exchange agreement, in which NASA and a company agree to cooperate in the conduct and analysis of research programs. In addition to establishing and demonstrating scientific and technological precepts for analyzing and using low-g environments, NASA is establishing legal and management mechanisms to share cost and risk of early commercial ventures.

Brown, R. L.↗
NASA NTRS1981

Defining critical point experiments for a space laboratory

Three representative low-gravity experiments for a fluid near its liquid-vapor critical point are being defined. Two of these experiments require very careful measurements of properties of the fluid in thermodynamic equilibrium, while the third experiment is a series of optical observations of the phenomena which occur as a fluid is changed from one phase to two phases, either by cooling through the critical point, or by adiabatic expansion. There is concern that residual spacecraft motions may complicate the interpretation of the data from the proposed experiments. It is possible that the Spacelab environment will render certain desirable experiments impractical.

Moldover, M. R.↗
NASA NTRS1982

Acoustically induced oscillation and rotation of a large drop in space

A 2.5 cm diameter water drop was successfully deployed and manipulated in a triaxial acoustic resonance chamber during a 240 sec low-gravity SPAR rocket flight. Oscillation and rotation were induced by modulating and phase shifting the signals to the speakers. Portions of the film record were digitized and analyzed. Spectral analysis brought out the n = 2, 3, 4 free oscillation modes of the drop, its very low-frequency center-of-mass motion in the acoustic potential well, and the forced oscillation frequency. The drop boundaries were least-square fitted to general ellipses, providing eccentricities of the distorted drop. The normalized equatorial area of the rotating drop was plotted vs a rotational parameter, and was in excellent agreement with values derived from the theory of equilibrium shapes of rotating liquid drops.

Jacobi, N.↗
NASA NTRS1982

Collapse of large vapor bubbles

The refilling of propellant tanks while in a low-gravity environment requires that entrapped vapor bubbles be collapsed by increasing the system pressure. Tests were performed to verify the mechanism of collapse for these large vapor bubbles with the thermodynamic conditions, geometry, and boundary conditions being those applicable to propellant storage systems. For these conditions it was found that conduction heat transfer determined the collapse rate, with the specific bubble geometry having a significant influence.

Tegart, J.↗
NASA NTRS1979

Investigations on transparent liquid-miscibility gap systems

Sedimentation and phase separation is a well known occurrence in monotectic or miscibility gap alloys. Previous investigations indicate that it may be possible to prepare such alloys in a low-gravity space environment but recent experiments indicate that there may be nongravity dependent phase separation processes which can hinder the formation of such alloys. Such phase separation processes are studied using transparent liquid systems and holography. By reconstructing holograms into a commercial-particle-analysis system, real time computer analysis can be performed on emulsions with diameters in the range of 5 micrometers or greater. Thus dynamic effects associated with particle migration and coalescence can be studied. Characterization studies on two selected immiscible systems including an accurate determination of phase diagrams, surface and interfacial tension measurements, surface excess and wetting behavior near critical solution temperatures completed.

Lacy, L. L.↗
NASA NTRS1979

Convective and morphological instability in vapor crystal growth

Theoretical and experimental work on the fluid dynamics of physical vapor transport is reported. It is shown that diffusion in viscous interaction with container walls leads to concentration gradients normal to the main transport direction. Consequently any convection threshold is removed. This coupling with convective instabilities makes the theoretical interpretation of earthbound (anisotropic) morphological stability studies on vapor-solid interfaces intractable. Hence low-gravity experiments are suggested that will allow for the establishment of morphological stability criteria under diffusion controlled conditions.

Rosenberger, F.↗
NASA NTRS1982

Containerless undercooling and solidification of bulk metastable Nb3Ge alloys

Experiments using containerless undercooling and low-gravity solidification of Nb(1-x)Ge(x) alloys for x=0.13-0.27 have been carried out in a 32-m drop-tube apparatus to study the feasibility of forming metastable Nb3Ge in bulk form. It is found that bulk samples (2-3 mm diam) of Nb-Ge alloys with 18-22% Ge can be undercooled by large amounts (300-500 K) and solidified in a containerless environment. Subsequent quenching of the solidified samples in oil helps preserve the metastable A-15 phase by removing the latent heat of fusion and quickly cooling the samples to a stable temperature below 1000 C. Even at an undercooling of less than 100 K, the superconducting transition temperature of the material is enhanced over the cast material by about 1 K.

Lacy, L. L.↗
NASA NTRS1982

The influence of acceleration forces on dendritic growth and grain structure

The results of experiments on the tin-15 wt pct lead system are presented, showing the effects on microstructure of solidification in the presence of acceleration forces from 0.0001 to 5 g for three cooling rates. An increase in the acceleration level is shown to drive fluid flow and cause dendrite remelting, fragmentation, and macrosegregation. The cooling rate impacts the final structure through its control of dendrite arm spacings and permeability to fluid flow. At the low (0.0001 g) acceleration, dendrite arm spacings deviated from the predicted relationship to cooling rate. An explanation for this anomaly is given which considers the temperature and concentration gradients in the low-gravity environment.

Johnston, M. H.↗
NASA NTRS1983

Solidifying Bi/MnBi at Low Gravity

Directional solidification of Bi/MnBi magnetic alloy under low gravity enhances magnetic properties. Magnetic properties of low-gravity Bi/MnBi alloy make attractive material for use in motors and other small electrical and electronic components.

Drauch, J.↗
NASA NTRS1982

Mercuric iodide (HgI2) growth for nuclear detectors

The purpose of this investigation is to grow more-perfect mercuric iodide crystals in a low-gravity environment by taking advantage of diffusion-controlled growth conditions and by avoiding the problem of strain dislocations produced by the crystal's weight. This crystal has considerable practical importance as a sensitive gamma-ray detector and energy spectrometer that can operate at ambient temperature, as compared to presently available detectors that must be cooled to near liquid nitrogen temperatures. However, the performance of mercuric iodide crystals only rarely approaches the expected performance, presumably because some of the free electrical charges produced within the crystal are not collected at the electrodes, but instead remain trapped or immobilized at crystal defects. An efficient high atomic number semiconductor detector capable of operating at room temperature utilizing single HgI2 crystals offers a greater potential than existing detector technology.

Schnepple, W.↗
NASA NTRS1983

Preliminary science report on the directional solidification of hypereutectic cast iron during KC-135 low-G maneuvers

An ADSS-P directional solidification furnace was reconfigured for operation on the KC-135 low-g aircraft. The system offers many advantages over quench ingot methods for study of the effects of sedimentation and convection on alloy formation. The directional sodification furnace system was first flown during the September 1982 series of flights. The microstructure of the hypereutectic cast iron sample solidified on one of these flights suggests a low-g effect on graphite morphology. Further experiments are needed to ascertain that this effect is due to low-gravity and to deduce which of the possible mechanisms is responsible for it.

Curreri, P. A.↗
NASA NTRS1983

Method and apparatus for supercooling and solidifying substances

An enclosure provides a containerless environment in which a sample specimen is positioned. The specimen is heated in the containerless environment, and the specimen melt is dropped through the tube in which it cools by radiation. The tube is alternatively backfilled with an inert gas whereby the specimen melt cools by both radiation and convection during its free fall. During the free fall, the sample is in a containerless, low-gravity environment which enhances supercooling in the sample and prevents sedimentation and thermal convection influences. The sample continues to supercool until nucleation occurs which is detected by silicon photovoltaic detectors. The sample solidifies after nucleation and becomes completely solid before entering the detachable catcher. The amount of supercooling of the specimen can be measured by knowing the cooling ratio and determining the time for nucleation to occur.

Lacy, L. L.↗
NASA NTRS1983

Mass loss, levitation, accretion, and the sharp-lined features in hot white dwarfs

A study has been conducted of eight white dwarfs, including seven DA and one He-rich types. The study is based on high-resolution observations conducted with the aid of the International Ultraviolet Explorer. Four of the dwarfs show features related to heavy elements which are not interstellar in origin. It is tentatively suggested that, at least in the hottest low-gravity DA white dwarfs, the observed narrow-lined features are formed in expanding halos or winds associated with the white dwarfs. Theoretically, stable white dwarf halos should actually be coronae with temperatures in excess of 1,000,000 K. However, the observed narrow-lined features do not suggest such high temperatures. The observed radial velocities suggest weak stellar winds in two hot white dwarfs, namely, G191-B2B and 2111+49. It is tentatively proposed that radiative levitation can explain the appearance of the observed metallic lines in the hot DA white dwarfs.

Bruhweiler, F. C.↗
NASA NTRS1982

Influence of gravity driven convection on the directional solidification of Bi/MnBi eutectic composites

The role of gravity on Bridgman-Stockharger directional solidification of eutectic Bi/MnBi has been studied in reduced gravity aboard NASA sounding rocket SPAR flight experiments and contrasted with normal gravity investigations. The directional solidification of eutectic Bi/MnBi results in a low volume fraction, faceted/nonfaceted aligned rod eutectic whose MnBi rod size, interrod spacing, thermal and magnetic properties are sensitive functions of solidification processing conditions. The morphology of the low-gravity samples showed striking differences compared with identically processed, normal gravity samples grown in the same apparatus. The MnBi rod diameter and interrod spacing distributions were significantly smaller, approximately 50 percent, for the low gravity samples compared with identically processed one gravity samples. Accompanying the smaller MnBi rod diameters observed in the flight samples, was an increase in permanent magnet properties which reached greater than 97 percent of the theoretical maximum. Gravitationally induced thermal instabilities in one-gravity which result in irregular interface movement and associated difficulty of the faceted MnBi phase to branch are suggested to explain the morphological differences between one and low gravity solidification.

Pirich, R. G.↗