Search NASA⌕ Search

SEARCH · Search NASA

Results for “mass diffusivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

A Unified SHOC-MF Boundary Layer Parameterization in the NASA Goddard Earth Observing System Model

We present results from a novel extension of the boundary layer parameterization in the NASA Goddard Earth Observing System (GEOS) model. An Eddy Diffusivity-Mass Flux (EDMF) multi-plume updraft scheme was previously implemented in GEOS. Here we replace the K-profile eddy diffusivity scheme of Lock et. al. (2000) with the Simplified Higher Order Closure (SHOC; Bogenschutz and Krueger, 2013). The scheme prognoses turbulent kinetic energy, and derives buoyancy flux, cloud fraction and condensate from a trivariate double-gaussian joint PDF. The original SHOC scheme is modified in two significant respects: (i) contributions from the EDMF updrafts are included in estimates of all higher order moments used to determine the PDF; and (ii) the second and third moments of total water are made prognostic variables, with source terms associated with EDMF updrafts. The predicted higher order moments as well as updraft and environmental properties are compared with large eddy simulations in several case studies. Results indicate that many higher order moments are underestimated when the mass flux contribution is neglected.

Nathan Arnold↗

A Unified SHOC-MF Boundary Layer Parameterization in the NASA Goddard Earth Observing System Model

We present results from a novel extension of the boundary layer parameterization in the NASA Goddard Earth Observing System (GEOS) model. An Eddy Diffusivity-Mass Flux (EDMF) multi-plume updraft scheme was previously implemented in GEOS. Here we replace the K-profile eddy diffusivity scheme of Lock et. al. (2000) with the Simplified Higher Order Closure (SHOC; Bogenschutz and Krueger, 2013). The scheme prognoses turbulent kinetic energy, and derives buoyancy flux, cloud fraction and condensate from a trivariate double-gaussian joint PDF. The original SHOC scheme is modified in two significant respects: (i) contributions from the EDMF updrafts are included in estimates of all higher order moments used to determine the PDF; and (ii) the second and third moments of total water are made prognostic variables, with source terms associated with EDMF updrafts. The predicted higher order moments as well as updraft and environmental properties are compared with large eddy simulations in several case studies. Results indicate that many higher order moments are underestimated when the mass flux contribution is neglected.

Nathan Arnold↗

Numerical evaluation of AGR-2 fission product release

The AGR-2 experiment produced normal operation and accident condition fuel performance data for tri-structural isotropic (TRISO) particles with UCO and UO 2 kernels. Data for compacts with no failed particles and for compacts with one or more failed particles are available. To model the fission product diffusion and release from these compacts, it is important to consider the computational mesh as well as the heat conduction and mass diffusion properties of the materials in a TRISO particle. Code and solution verification studies with the Bison fuel performance code were performed to show that the code is computing correct solutions. Bison comparisons to post-irradiation examination data and PARFUME predictions were made for several sets of compacts. Furthermore, these comparisons considered silver, cesium, strontium, and krypton with and without failed particles. Bison predictions closely match those of PARFUME, while both codes generally overpredict post-irradiation examination data.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Development of a Unified SHOC-EDMF PBL Parameterization in the NASA GEOS Model

We present results from a novel extension of the boundary layer parameterization in the NASA Goddard Earth Observing System (GEOS) model. An Eddy Diffusivity-Mass Flux (EDMF) multi-plume updraft scheme was previously implemented in GEOS. Here we replace the K-profile eddy diffusivity scheme of Lock et. al. (2000) with the Simplified Higher Order Closure (SHOC). The scheme prognoses turbulent kinetic energy, and derives buoyancy flux, cloud fraction and condensate from a trivariate double-gaussian joint PDF. The original SHOC scheme is modified in two significant respects: (i) contributions from the EDMF updrafts are included in estimates of all higher order moments used to determine the PDF; and (ii) the second and third moments of total water are made prognostic variables, with source terms associated with EDMF updrafts. The predicted higher order moments as well as updraft and environmental properties are compared with large eddy simulations in several case studies.

SHOC-EDMF↗

The effect of saturated thermal conduction on clouds in a hot plasma

We numerically investigate the internal evolution of multiphase clouds, which are at rest with respect to an ambient, highly ionized medium (HIM) representing the hot component of the circumgalactic medium. Time-dependent saturated thermal conduction and its implications like condensation rates and mixing efficiency are assessed in multiphase clouds. Our simulations are carried out by using the adaptive mesh refinement code FLASH. The model clouds are initially in both hydrostatic and thermal equilibrium and are in pressure balance with the HIM. Thus, they have steep gradients in both temperature and density at the interface to HIM leading to non-negligible thermal conduction. Several physical processes are considered numerically or semi-analytically: thermal conduction, radiative cooling and external heating of gas, self-gravity, mass diffusion, and dissociation of molecules and ionization of atoms. It turns out that saturated thermal conduction triggers a continuous condensation irrespective of cloud mass. Dynamical interactions with ambient HIM all relate to the radial density gradient in the clouds: (1) mass flux due to condensation is the higher the more homogeneous the clouds are; (2) mixing of condensed gas with cloud gas is easier in low-mass clouds, because of their shallower radial density gradient; and thus (3) accreted gas is distributed more efficiently. A distinct and sub-structured transition zone forms at the interface between cloud and HIM, which starts at smaller radii and is much narrower as deduced from analytical theory.

79 ASTRONOMY AND ASTROPHYSICS↗

Mass Changes the Diffusion Coefficient of Particles with Ligand-Receptor Contacts in the Overdamped Limit

Inertia does not generally affect the long-time diffusion of passive overdamped particles in fluids. Yet a model starting from the Langevin equation predicts a surprising property of particles coated with ligands that bind reversibly to surface receptors: heavy particles diffuse more slowly than light ones of the same size. We show this by simulation and by deriving an analytic formula for the mass-dependent diffusion coefficient in the overdamped limit. We estimate the magnitude of this effect for a range of biophysical ligand-receptor systems, and find it is potentially observable for tailored micronscale DNA-coated colloids.

97 MATHEMATICS AND COMPUTING↗

Nonlinear Structure of the Diffusing Gas-Metal Interface in a Thermonuclear Plasma

Here, we describe the theoretical structure of the plasma diffusion layer that develops from an initially sharp gas-metal interface. The layer dynamics under isothermal and isobaric conditions is considered so that only mass diffusion (mixing) processes can occur. The layer develops a distinctive structure with asymmetric and highly nonlinear features. On the gas side of the layer the diffusion coefficient goes nearly to zero, causing a sharp “front,” or well defined boundary between mix layer and clean gas with similarities to the Marshak thermal waves. Similarity solutions for the nonlinear profiles are found and verified with full ion kinetic code simulations. A criterion for plasma diffusion to significantly affect burn is given.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Simulating adsorption of U(VI) under transient groundwater flow and hydrochemistry – Physical versus non-equilibrium model

Coupled intra-grain diffusional mass-transfer and non-linear surface complexation processes play an important role for the transport behaviour of U(VI) in contaminated aquifers. Two alternative model approaches for simulating these coupled processes have been analysed and compared: (i) the physical non-equilibrium approach that explicitly accounts for aqueous speciation and instantaneous surface complexation reactions in the intra-grain regions and approximates the diffusive mass exchange between the immobile intra-grain pore water and the advective pore water as multi-rate 1st-order mass transfer and (ii) the chemical non-equilibrium approach that approximates the diffusion-limited intra-grain surface complexation reactions by a set of multiple 1st-order surface complexation reaction kinetics, thereby eliminating the explicit treatment of aqueous speciation in the intra grain pore water. Model comparison has been carried out for column and field scale scenarios, representing the highly transient hydrological and geochemical conditions in the U(VI)-contaminated aquifer at the Hanford 300A site, Washington, USA. It was found that the response of apparent U(VI) adsorption/desorption kinetic behaviour to hydrogeochemically induced changes in U(VI) sorption strength is more pronounced in the physical than in the chemical non-equilibrium model. The magnitude of the differences in model behaviour depends particularly on the degree of disequilibrium between the advective and immobile phase U(VI) concentrations. While a clear difference in U(VI) transport behaviour between the two models was noticeable for the column-scale scenarios, only minor differences were found for the Hanford 300A field scale scenarios, where the model-generated disequilibrium conditions were less pronounced as a result of high frequent groundwater flow reversals.

54 ENVIRONMENTAL SCIENCES↗

Low Mach number fluctuating hydrodynamics of multispecies liquid mixtures

We develop a low Mach number formulation of the hydrodynamic equations describing transport of mass and momentum in a multispecies mixture of incompressible miscible liquids at specified temperature and pressure, which generalizes our prior work on ideal mixtures of ideal gases [Balakrishnan et al., “Fluctuating hydrodynamics of multispecies nonreactive mixtures,” Phys. Rev. E 89 013017 (2014)] and binary liquid mixtures [Donev et al., “Low mach number fluctuating hydrodynamics of diffusively mixing fluids,” Commun. Appl. Math. Comput. Sci. 9(1), 47-105 (2014)]. In this formulation, we combine and extend a number of existing descriptions of multispecies transport available in the literature. The formulation applies to non-ideal mixtures of arbitrary number of species, without the need to single out a “solvent” species, and includes contributions to the diffusive mass flux due to gradients of composition, temperature, and pressure. Momentum transport and advective mass transport are handled using a low Mach number approach that eliminates fast sound waves (pressure fluctuations) from the full compressible system of equations and leads to a quasi-incompressible formulation. Thermal fluctuations are included in our fluctuating hydrodynamics description following the principles of nonequilibrium thermodynamics. We extend the semi-implicit staggered-grid finite-volume numerical method developed in our prior work on binary liquid mixtures [Nonaka et al., “Low mach number fluctuating hydrodynamics of binary liquid mixtures,” http://arxiv.org/abs/1410.2300 (2015)] and use it to study the development of giant nonequilibrium concentration fluctuations in a ternary mixture subjected to a steady concentration gradient. We also numerically study the development of diffusion-driven gravitational instabilities in a ternary mixture and compare our numerical results to recent experimental measurements [Carballido-Landeira et al., “Mixed-mode instability of a miscible interface due to coupling between Rayleigh–Taylor and double-diffusive convective modes,” Phys. Fluids 25, 024107 (2013)] in a Hele-Shaw cell. We find that giant nonequilibrium fluctuations can trigger the instability but are eventually dominated by the deterministic growth of the unstable mode, in both quasi-two-dimensional (Hele-Shaw) and fully three-dimensional geometries used in typical shadowgraph experiments.

42 ENGINEERING↗

Fluctuating hydrodynamics of reactive liquid mixtures

Fluctuating hydrodynamics (FHD) provides a framework for modeling microscopic fluctuations in a manner consistent with statistical mechanics and nonequilibrium thermodynamics. This paper presents an FHD formulation for isothermal reactive incompressible liquid mixtures with stochastic chemistry. Fluctuating multispecies mass diffusion is formulated using a Maxwell-Stefan description without assuming a dilute solution, and momentum dynamics is described by a stochastic Navier-Stokes equation for the fluid velocity. We consider a thermodynamically consistent generalization for the law of mass action for non-dilute mixtures and use it in the chemical master equation (CME) to model reactions as a Poisson process. The FHD approach provides remarkable computational efficiency over traditional reaction-diffusion master equation methods when the number of reactive molecules is large, while also retaining accuracy even when there are as few as ten reactive molecules per hydrodynamic cell. We present a numerical algorithm to solve the coupled FHD and CME equations and validate it on both equilibrium and nonequilibrium problems. We simulate a diffusively driven gravitational instability in the presence of an acid-base neutralization reaction, starting from a perfectly flat interface. We demonstrate that the coupling between velocity and concentration fluctuations dominates the initial growth of the instability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The crucial role of cooling in the making of molecular clouds and stars

The role that velocity or pressure fluctuations in the H I clouds medium can play in initiating compression of sub-Jeans mass diffuse clouds is outlined. The frequently discussed idea is reviewed that substantial overpressures arising in the warm, medium and/or highly supersonic compressions of H I clouds can push sub-Jeans mass clumps to densities where gravity can take over and complete the star formation process. A nonequilibrium model is used to analyze the impact of external disturbances on gas clouds, and estimates of the required disturbance amplitudes are substantially reduced from previous estimates based on equilibrium arguments. The results reveal that a cloud which cools under compression is particularly sensitive to mild disturbances from its environment. Furthermore, the specific energy required to trigger effective compressions in a cooling medium is nearly independent of the cloud's mass. It is proposed that mildly nonlinear disturbances play a primary role in the formation of molecular cloud and stars.

Tohline, Joel E.↗

Temperature and salt controlled tuning of protein clusters

The formation of molecular assemblies in protein solutions is of strong interest both from a fundamental viewpoint and for biomedical applications. While ordered and desired protein assemblies are indispensable for some biological functions, undesired protein condensation can induce serious diseases. As a common cofactor, the presence of salt ions is essential for some biological processes involving proteins, and in aqueous suspensions of proteins can also give rise to complex phase diagrams including homogeneous solutions, large aggregates, and dissolution regimes. Here, we systematically study the cluster formation approaching the phase separation in aqueous solutions of the globular protein BSA as a function of temperature (T), the protein concentration (c p ) and the concentrations of the trivalent salts YCl 3 and LaCl 3 (c s ). As an important complement to structural, i.e. time-averaged, techniques we employ a dynamical technique that can detect clusters even when they are transient on the order of a few nanoseconds. By employing incoherent neutron spectroscopy, we unambiguously determine the short-time self-diffusion of the protein clusters depending on c p , c s and T. We determine the cluster size in terms of effective hydrodynamic radii as manifested by the cluster center-of-mass diffusion coefficients D. For both salts, we find a simple functional form D(c p , c s , T) in the parameter range explored. The calculated inter-particle attraction strength, determined from the microscopic and short-time diffusive properties of the samples, increases with salt concentration and temperature in the regime investigated and can be linked to the macroscopic behavior of the samples.

59 BASIC BIOLOGICAL SCIENCES↗

Direct Molecular Evidence of Proton Transfer and Mass Dynamics at the Electrode–Electrolyte Interface

Proton transfer has been widely regarded as a key step in many electrochemical and biological processes. However, direct molecular evidence has long been lacking. In this work, we chose the electrochemical oxidation of acetaminophen (APAP) as a model system and utilized in situ liquid time-of-flight secondary ion mass spectroscopy (ToF-SIMS) to molecularly examine proton solvation and transfer in this process. In addition, we successfully captured and identified the transient radical intermediate, providing solid molecular evidence to resolve an important debate in electron transfer-proton transfer oxidation mechanism of APAP. Moreover, the potential-dependent behaviors of both inert ions and electroactive species during the dynamic potential scanning were chemically monitored in real time and the mass diffusion mechanism regarding the electroactive and non-electroactive species was revealed under polarized conditions. The results are well consistent with our computer simulation. The observations in this work greatly improved the comprehensive understanding of proton transfer and mass dynamics occurring at the electrode-electrolyte interface involved in complex electrochemical processes.

Wang, Jun-Gang↗

Effect of growth parameters on compositional variations in directionally solidified HgCdTe alloys

A series of Hg(1-x)Cd(x)Te alloy crystals was grown by directional solidification with compositions ranging from x = 0.2 to x = 0.4. The measured axial compositional profiles were interpreted in terms of an exact numerical solution of the appropriate diffusion equation that takes into account both the variations of the segregation coefficient and solidification rate with composition. The solutions for all growth rates agree generally well with the experimental data, and confirm earlier observations that employed approximate analytical solutions. The effective mass diffusion coefficients showed no significant composition or melt temperature dependence. Slightly higher diffusion coefficients were obtained, however, for the highest growth rates.

Szofran, F. R.↗

Direct molecular diffusion and micro-mixing for rapid dewatering of LiBr solution

A slow molecular diffusion rate often limits the desorption process of an absorbate molecule from a liquid absorbent. To enhance the desorption rate, the absorbent is often boiled to increase the liquid vapor interfacial area. However, the growth of bubbles generated during the nucleate boiling process still remains mass-diffusion limited. Here, it is shown that a desorption rate higher than that of boiling can be achieved, if the vapor absorbent interface is continuously replenished with the absorbate-rich solution to limit the concentration boundary layer growth. The study is conducted in a LiBr-water-solution, in which the water molecules' diffusion rate is quite slow. The manipulation of the vapor solution interface concentration distribution is enabled by the mechanical confinement of the solution flow within microchannels, using a hydrophobic vapor-venting membrane and the implementation of microstructures on the flow channel's bottom wall. The microstructures stretch and fold the laminar streamlines within the solution film and produce vortices. The vortices continuously replace the concentrated solution at the vapor solution interface with the water-rich solution brought from the bottom and middle of the flow channel. The physics of the process is described using a combination of experimental and numerical studies. Published by Elsevier Ltd.

Bigham, S↗

Irradiation-enhanced Interactions at UO 2 /Al 2 O 3 /Al Interfaces

Combustion synthesis is used to prepare thin UO 2 films on aluminum alloy substrates. This simple preparation method involves electrospraying uranyl nitrate + acetylacetone + 2-methoxyethanol solution on the substrate, followed by a short annealing at 350 or 550 °C. The irradiation of films with a 40 Ar 2+ ion beam (energy of 1.7 MeV and fluences of 7.7 × 10 16 and 1.3 × 10 17 ions/cm 2 ) is conducted to investigate irradiation-induced restructuring processes. High-resolution transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS) investigations show that the annealing temperature significantly influences the crystallinity and stability of materials during irradiation. A small amount of Mg in the alloy substrate diffuses into the amorphous Al 2 O 3 interfacial layer between the film and the substrate. Local thermal spikes from the incoming ions facilitate the irradiation-induced mixing of immiscible Al 2 O 3 and UO 2 for the materials prepared at 350 °C. This mass diffusion produces relatively large cavities at the interface. Selective diffusion of a more significant amount of Mg for the materials prepared at 550 °C suppresses the mixing of the Al 2 O 3 interlayer with the film but forms Mg y U 1–y O 2±x solid solutions during irradiation. Local thermal heating triggers the precipitation of a discontinuous crystalline MgO layer close to the film surface. As a result, the enhanced and selective diffusion of Mg into the film makes the materials prepared at 550 °C more robust and mechanically stable than those prepared at 350 °C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Diffusional Response of Layer-by-Layer Assembled Polyelectrolyte Chains to Salt Annealing

Here, we report on the effect of salt on diffusion of polyelectrolyte (PE) chains within electrostatically assembled polyelectrolyte multilayers. Layer-by-layer (LbL) films were assembled using poly(methacrylic acid) (PMAA) as a polyanion and quaternized poly(2-(dimethylamino)ethyl methacrylate) as a polycation. Fluorescence recovery after photobleaching and neutron reflectometry were used to monitor the center-of-mass diffusion of PMAA chains in directions parallel and perpendicular to the substrate (D ∥ and D ⊥ , respectively). Film intermixing and polymer chain diffusion in the direction perpendicular to the substrate exhibit an unusual dependence on the PMAA molecular weight, with dramatically stronger diffusional response to salt annealing for the films formed by PMAA with the lowest molecular weight of 7 kDa. Finally, films assembled with this lowest molecular weight PMAA reveal that both diffusion coefficients of PMAA chains (D ∥ and D ⊥ ) depend exponentially on the concentration of salt in the annealing solutions, with much faster diffusion in the direction parallel to the substrate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗