Search NASA⌕ Search

SEARCH · Search NASA

Results for “material flows”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Effect of Zinc Interlayer in Microstructure Evolution and Mechanical Properties in Dissimilar Friction Stir Welding of Aluminum to Titanium

The welding of aluminum (Al) and titanium (Ti) is difficult and challenging due to the differences in their chemical and physical properties, and the formation of brittle intermetallic phases. In the present experiment, a zinc (Zn) interlayer was used during friction stir welding of Al to Ti. The weld was characterized in detail to understand the mechanisms associated with microstructural evolution and improvement in mechanical properties of the weld. X-ray computed tomography results reveal three-dimensional distribution of particles and flakes of titanium in the weld nugget. It was also observed that Ti particles are inhomogeneously distributed in the weld and the distribution depends on their morphology. Such a distribution of Ti was informative in understanding material flow. In addition, the consolidation of Zn in the Al matrix reveals the nature of material flow in the weld nugget as well. The importance of the Zn interlayer and mechanism of phase formation was explored in this study. It was characterized that the mechanical mixing of Zn with Al and Ti alters phase evolution and restricts the formation of conventional Al{sub 3}Ti intermetallic phase. The presence of zinc homogenizes elemental distribution and inhibits the formation of brittle intermetallic phases, which leads to a substantial improvement in mechanical properties of the weld.

36 MATERIALS SCIENCE↗

Interfacial microstructure evolution and weld formation during ultrasonic welding of Al alloy to Cu

Highlights: • Surface oxide layer was fractured and dispersed around the weld interface during ultrasonic welding of Al alloy to Cu. • Mechanical mixing around the weld interface was caused by compressive deformation with ultrasonic vibration. • Once micro-bonds were generated between Al and Cu, shear deformation occurred around the weld interface. • Enhanced Cu diffusion into Al in the severely deformed region significantly contributed to the weld formation. - Abstract: Dissimilar welds of Al alloy 1050 to Cu were prepared via ultrasonic spot welding in order to understand the formation of welds and interfacial microstructures. To observe oxide layer behavior at the weld interface, the anodized Al alloy 1050 was also welded to Cu. Mechanical mixing and material flow during ultrasonic welding broke and dispersed the oxide layers into the Al matrix. This material flow is attributed to compressive deformation that occurred due to ultrasonic vibrations. Direct bonding in the Al/Cu region increased with welding time. Once micro-bonds were generated between Al and Cu, the Al matrix in the vicinity of the weld interface was severely deformed in the direction of the ultrasonic vibrations. Consequently, a recrystallized microstructure with shear texture was formed in the Al matrix. Deformation heating and severe shear deformation formed Al{sub 2}Cu intermetallic compound layers at the weld interface. The growth rate of the Al{sub 2}Cu layer was much faster than had previously been estimated based upon the peak temperature and ultrasonic welding heating time. This is likely due to the increased rate of Cu diffusion into Al in the severely deformed region.

36 MATERIALS SCIENCE↗

Meshfree simulation and experimental validation of extreme thermomechanical conditions in friction stir extrusion

Abstract Friction stir extrusion (FSE) is a novel solid-phase processing technique that consolidates and extrudes metal powders, flakes, chips, or billets into high-performance parts by plastic deformation, which has the potential to save substantial processing time and energy. Currently, most studies on FSE are experimental and only a few numerical models have been developed to explain and predict the complex physics of the process. In this work, a meshfree simulation framework based on smoothed particle hydrodynamics (SPH) was developed for FSE. Unlike traditional grid-based methods, SPH is a Lagrangian particle-based method that can handle severe material deformations, capture moving interfaces and surfaces, and monitor the field variable histories explicitly without complicated tracking schemes. These aspects of SPH make it attractive for the FSE process, where in situ evolution of field variables is difficult to observe experimentally. To this end, a 3-D, fully thermomechanically coupled SPH model was developed to simulate the FSE of aluminum wires. The developed model was thoroughly validated by comparing the numerically predicted material flow, strain, temperature history, and extrusion force with experimental results for a certain set of process parameters. The validated SPH model can serve as an effective tool to predict and better understand the extreme thermomechanical conditions during the FSE process.

99 GENERAL AND MISCELLANEOUS↗

Effect of Forging on Microstructure, Mechanical Properties and Acoustic Emission Characteristics of Al Alloy (2014): 10 wt.% SiC{sub p} Composite

In this paper a systematic study has been undertaken to study the effect of forging on microstructure, mechanical properties and acoustic emission (AE) characteristics of Al alloy (2014)—10 wt.% SiC metal-matrix composites. Hammer forging was carried out at a temperature of 470 °C in an open die, with a deformation ratio of 3.5:1. Microstructural analyses were carried out at three different positions of forged billet. Significant material flow was observed in the sample taken from the sides of the forged billet, but no appreciable material flow was observed at the center of the forged billet. The microstructural characterization showed that forging resulted in cracking of SiC particles in Al alloy (2014)—10 wt.% SiC composite. The AE results during forging showed an increase in AE signal intensity during the initial yielding period and a subsequent decrease in the intensity of AE signals with sudden burst at the end of the forging. The plastic deformation at room temperature was less ductile in nature but at high temperature, appreciable ductility was observed. The FESEM micrographs of fracture surfaces of the tensile specimens showed appreciable clustering of SiC particles during plastic deformation both at room and high temperature.

36 MATERIALS SCIENCE↗

On the additive manufacturing (3D printing) of viscoelastic materials and flow behavior: From composites to food manufacturing

Additive manufacturing (AM) or more commonly known as 3D-printing has gained much ground in industrial manufacturing because of its breakthrough in rapid prototyping and processes. To date, the 3D-printing market has grown significantly and is poised for growth in line with digitization of manufacturing. Furthermore, the main objective of this review article focuses on the viscoelastic behavior (viscous solution) of 3D printing materials at ambient conditions, which are not essentially under melt-flow or higher temperatures. The initial section reviews the basic concepts on viscosity and viscoelastic phenomenon, with emphasis on the preferred conditions a viscous material should have prior to 3D-printing. Several examples of structures formed from viscoelastic materials through 3D-printing are also detailed, as well as the various curing techniques for different printed objects or models. While there is much interest on industrial applications, the last part surveys various food formulations used for 3D-printing.

36 MATERIALS SCIENCE↗

Materials for flow battery energy storage and methods of using

The present disclosure relates to a mixture that includes a mediator having a first redox potential, a non-liquid active material having a second redox potential that is less than the first redox potential, and a cation. In addition, the non-liquid active material has a first condition that includes a first oxidation state, where the cation is intercalated within the non-liquid active material, and the non-liquid active material has a second condition that includes a second oxidation state that is higher than the first oxidation state, where the non-liquid active material is substantially free of the cation. In addition, the mediator has a first condition that includes a third oxidation state and a second condition that includes a fourth oxidation state that is higher than the third oxidation state. In addition, the non-liquid active material is capable of being reversibly cycled between its first condition and its second condition, and the mediator is capable of being reversibly cycled between its first condition and its second condition.

25 ENERGY STORAGE↗

Bypass valve and coolant flow controls for optimum temperatures in waste heat recovery systems

Implementing an optimized waste heat recovery system includes calculating a temperature and a rate of change in temperature of a heat exchanger of a waste heat recovery system, and predicting a temperature and a rate of change in temperature of a material flowing through a channel of the waste heat recovery system. Upon determining the rate of change in the temperature of the material is predicted to be higher than the rate of change in the temperature of the heat exchanger, the optimized waste heat recovery system calculates a valve position and timing for the channel that is configurable for achieving a rate of material flow that is determined to produce and maintain a defined threshold temperature of the heat exchanger, and actuates the valve according to the calculated valve position and calculated timing.

42 ENGINEERING↗

A model for complex flows of soft glassy materials with application to flows through fixed fiber beds

The soft glassy rheology (SGR) model has successfully described the time dependent simple shear rheology of a broad class of complex fluids including foams, concentrated emulsions, colloidal glasses, and solvent-free nanoparticle-organic hybrid materials (NOHMs). The model considers a distribution of mesoscopic fluid elements that hop from trap to trap at a rate which is enhanced by the work done to strain the fluid element. While an SGR fluid has a broad exponential distribution of trap energies, the rheology of NOHMs is better described by a narrower energy distribution and we consider both types of trap energy distributions in this study. We introduce a tensorial version of these models with a hopping rate that depends on the orientation of the element relative to the mean stress field, allowing a range of relative strengths of the extensional and simple shear responses of the fluid. As an application of these models we consider the flow of a soft glassy material through a dilute fixed bed of fibers. The dilute fixed bed exhibits a range of local linear flows which alternate in a chaotic manner with time in a Lagrangian reference frame. It is amenable to an analytical treatment and has been used to characterize the strong flow response of many complex fluids including fiber suspensions, dilute polymer solutions and emulsions. We show that the accumulated strain in the fluid elements has an abrupt nonlinear growth at a Deborah number of order one in a manner similar to that observed for polymer solutions. The exponential dependence of the hopping rate on strain leads to a fluid element deformation that grows logarithmically with Deborah number at high Deborah numbers. SGR fluids having a broad range of trap energies flowing through fixed beds can exhibit a range of rheological behaviors at small Deborah numbers ranging from a yield stress, to a power law response and finally to Newtonian behavior.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Flow Trajectories in Friction Stir Welding

In the Friction Stir Welding (FSW) process, a rotating, shouldered tool with a threaded pin is inserted under pressure along the seam of two pieces of metal which are tightly clamped together, and secured against a rigid anvil underneath. The rotating pin travels along the seam and through a combination of pressure and friction heating produces a zone of plastic deformation around the pin within the workpiece on either side of the seam. As the pin is moved in the direction of welding, the plasticised material moves around the tool and bonds together behind it. The elements of the material flow behavior are a combination of three elements. There is a rotational transport of material being carried around the tool, extrusion of material being forced around the pin on both sides into the cavity created behind it, and a lifting and dropping of material as it is stirred and mixed by the rotating action of the pin. It was assumed that rotational motion of the plastic zone is the primary mechanism for transport of material around the welding tool. A kinematic mathematical model was used to compute trajectories of material movement for various distributions of rotational slip within the plastic zone. These trajectories were then compared with the results of an experiment that produced radiographs of markers embedded in a workpiece that was welded with the FSW process. It was assumed that the copper wire markers retained their original length as the aluminum material flowed around them. The kinematic model included a constraint so that the displacements were such that the total length of the wire markers did not increase after deformation. There was good agreement between the calculated trajectories for the case of localized slip at the outer surface of the plastic deformation zone and the radiographs of the copper wire markers. The trajectories differed markedly from the radiograph traces when a distributed slip zone was assumed. It was concluded that the flow field could be described generally by a rotating plug model with slip occurring on the surface at the outer boundary of the plastic zone.

Bernstein, Edward L.↗

An innovative and alternative approach toward gear fabrication

In this paper, we present the first demonstration of single-step gear manufacturing via an innovative in-situ friction stir forging approach. This novel process is a natural extension to the friction stir processing technique and relies on shear and normal stresses to form the complex shapes. Friction stir welding pin tool with shoulder is plunged at high revolutions per minute (rpm) into the sample to heat it to the desired temperature and enable plastic flow. Then, the tool is forged at high plunge rate to form the desired structurally-sound and defect free complex shapes. To better visualize the process the experiments are complemented by a 3D thermomechanically coupled, smoothed particle hydrodynamics (SPH) model to understand the material flow pattern both radially and through thickness in the gear teeth, plastic strain distribution, and temperature profile. We have demonstrated application of I-FSF to inherently poor formable AZ31 Mg, AA 7075-T6, and AA5083–10 vol% TiB 2 composite and fabricated 14-tooth spur gears from these materials with minimal farther machining. In conclusion, microstructure of the forged gears exhibited a directional material flow pattern due to the normal forging action and refinement of grains to 6–13 μm through dynamically recrystallization across the radial, through-thickness direction, which is in good agreement with the corresponding SPH simulation results.

42 ENGINEERING↗

CELAVI (Circular Economy Lifecycle Assessment and VIsualization) [SWR-20-87]

A circular economy emphasizes the efficient use of all resources (e.g., materials, land, water). Despite anticipated overall benefits to society, the transition to a circular economy is likely to create regional differences in impacts. Current tools are unable to fully evaluate these potential externalities, which will be important for informing research prioritization and regional decision making. The Circular Economy Lifecycle Assessment and VIsualization (CELAVI) framework allows stakeholders to quantify and visualize potential regional and sectoral transfers of impacts that could result from transitioning to a circular economy, with particular focus on energy materials. The framework uses system dynamics to model material flows for multiple circular economy pathways and decisions are based on learning-by-doing and are implemented via cost and strategic value of different circular economy pathways. It uses network theory to track the spatial and sectoral flow of functional units across a graph and discrete event simulation to to step through time and evaluate lifecycle assessment data at each time step. The framework is designed to be flexible and scalable to accommodate multiple energy materials and multiple energy technologies. The primary goal of CELAVI is to help answer questions about how material flows and environmental and economic impacts of energy systems might change if the circularity of energy systems increases.

Eberle, Annika↗

CELAVI (Circular Economy Lifecycle Assessment and VIsualization) v.1.3.1 9/30/2022 [SWR-20-87]

A circular economy emphasizes the efficient use of all resources (e.g., materials, land, water). Despite anticipated overall benefits to society, the transition to a circular economy is likely to create regional differences in impacts. Current tools are unable to fully evaluate these potential externalities, which will be important for informing research prioritization and regional decision making. The Circular Economy Lifecycle Assessment and VIsualization (CELAVI) framework allows stakeholders to quantify and visualize potential regional and sectoral transfers of impacts that could result from transitioning to a circular economy, with particular focus on energy materials. The framework uses system dynamics to model material flows for multiple circular economy pathways and decisions are based on learning-by-doing and are implemented via cost and strategic value of different circular economy pathways. It uses network theory to track the spatial and sectoral flow of functional units across a graph and discrete event simulation to to step through time and evaluate lifecycle assessment data at each time step. The framework is designed to be flexible and scalable to accommodate multiple energy materials and multiple energy technologies. The primary goal of CELAVI is to help answer questions about how material flows and environmental and economic impacts of energy systems might change if the circularity of energy systems increases.

Eberle, Annika↗

Investigation of temperature dependent microstructure evolution of pure iron during friction stir welding using liquid CO2 rapid cooling

Highlights: • Microstructure evolution during the FSW of pure iron was investigated under low and high heat input conditions, respectively. • Rapid cooling, tool stop action, marker insert and short-time annealing were employed to clarify the microstructure evolution. • Continuous and discontinuous dynamic recrystallizations occur during the microstructure evolution under both the conditions. • Incomplete and complete recrystallized microstructures were developed severally under the low and high heat input conditions. • Grain growth occurs during the normal cooling stage but it is very limited under the low heat input condition. - Abstract: The microstructure evolution of pure iron during friction stir welding was reconstructed by an ingenious experimental design, in which the rapid cooling friction stir welding combined with the tool “stop action” technique and the subsequent short-time annealing were adopted to “freeze” the transient microstructure during the stirring and reproduce the normal cooling during conventional friction stir welding, respectively. The microstructure evolution during the stirring and normal cooling was investigated along the material flow path and in the annealed “frozen” weld zone by high-resolution electron-backscatter-diffraction technique. The results show that the continuous and discontinuous dynamic recrystallizations occur simultaneously at the severe deformation stage in front of the tool both under low and high heat input conditions. However, during the material flow, the microstructure evolution involves the plastic deformation, recrystallization, high angle boundaries migration and dynamic recovery under the low heat input condition, while in a dynamic balance of deformation, recrystallization and grain growth under the high heat input conditions. At the cooling stage, normal grain growth occurs both for the low and high heat input welding conditions, while it is very limited for the low heat input condition.

36 MATERIALS SCIENCE↗

A hybrid Godunov method for radiation hydrodynamics

From a mathematical perspective, radiation hydrodynamics can be thought of as a system of hyperbolic balance laws with dual multiscale behavior (multiscale behavior associated with the hyperbolic wave speeds as well as multiscale behavior associated with source term relaxation). With this outlook in mind, this paper presents a hybrid Godunov method for one-dimensional radiation hydrodynamics that is uniformly well behaved from the photon free streaming (hyperbolic) limit through the weak equilibrium diffusion (parabolic) limit and to the strong equilibrium diffusion (hyperbolic) limit. Moreover, one finds that the technique preserves certain asymptotic limits. The method incorporates a backward Euler upwinding scheme for the radiation energy density E{sub r} and flux F{sub r} as well as a modified Godunov scheme for the material density {rho}, momentum density m, and energy density E. The backward Euler upwinding scheme is first-order accurate and uses an implicit HLLE flux function to temporally advance the radiation components according to the material flow scale. The modified Godunov scheme is second-order accurate and directly couples stiff source term effects to the hyperbolic structure of the system of balance laws. This Godunov technique is composed of a predictor step that is based on Duhamel's principle and a corrector step that is based on Picard iteration. The Godunov scheme is explicit on the material flow scale but is unsplit and fully couples matter and radiation without invoking a diffusion-type approximation for radiation hydrodynamics. This technique derives from earlier work by Miniati and Colella (2007) . Numerical tests demonstrate that the method is stable, robust, and accurate across various parameter regimes.

97 MATHEMATICS AND COMPUTING↗

An approach to developing an integrated pyroprocessing simulator

Pyroprocessing has been studied for a decade as one of the promising fuel recycling options in Korea. We have built a pyroprocessing integrated inactive demonstration facility (PRIDE) to assess the feasibility of integrated pyroprocessing technology and scale-up issues of the processing equipment. Even though such facility cannot be replaced with a real integrated facility using spent nuclear fuel (SF), many insights can be obtained in terms of the world's largest integrated pyroprocessing operation. In order to complement or overcome such limited test-based research, a pyroprocessing Modelling and simulation study began in 2011. The Korea Atomic Energy Research Institute (KAERI) suggested a Modelling architecture for the development of a multi-purpose pyroprocessing simulator consisting of three-tiered models: unit process, operation, and plant-level-model. The unit process model can be addressed using governing equations or empirical equations as a continuous system (CS). In contrast, the operation model describes the operational behaviors as a discrete event system (DES). The plant-level model is an integrated model of the unit process and an operation model with various analysis modules. An interface with different systems, the incorporation of different codes, a process-centered database design, and a dynamic material flow are discussed as necessary components for building a framework of the plant-level model. As a sample model that contains methods decoding the above engineering issues was thoroughly reviewed, the architecture for building the plant-level-model was verified. By analyzing a process and operation-combined model, we showed that the suggested approach is effective for comprehensively understanding an integrated dynamic material flow. This paper addressed the current status of the pyroprocessing Modelling and simulation activity at KAERI, and also predicted its path forward.

42 ENGINEERING↗

The Safe Guards Analysis Toolbox for Non-Proliferation Modeling

As nuclear technology becomes more widely available outside of nuclear weapon armed nations, the importance of preventing the illicit development of nuclear weapons has increased dramatically. A system of nuclear safeguards prevents proliferation; stopping the diversion of nuclear material from civilian facilities for the construction of nuclear weapons. These safeguards function through a combination of accountancy measurements that confirm the locations and amounts of nuclear material, and physical security at every nuclear facility. Safeguards Analysis (SGA) is a computational tool-kit developed using the MATLAB Simulink software suite that simulates a system of nuclear safeguards. The code allows users to examine current safeguards systems for weaknesses and to pinpoint the best locations for improvement. Developed as a modular framework, SGA does not directly model material flows, and relies on an outside code for this information. Instead, it represents a series of safeguards measurements that represent the values inspectors would see. Furthermore, SGA is designed to be modular in design, allowing the user to construct as complex or simple a model as needed: simulating an entire fuel-cycle comprising multiple facilities to a single measurement. SGA's use of outside codes for its material flow information makes it applicable to any model available to the user, as opposed to previous work that applied only to a single scenario. This paper discusses the initial development of SGA and the testing of these modules. The tests described in this paper demonstrate that the different pieces of SGA currently work as intended. Future work on the toolbox will develop and test SGA against a more realistic and complicated scenario using the various tools available in SGA. SGA currently has the pieces to perform analysis on safeguards systems, but needs to be tested on large, multi-MBA, systems to ensure the code is capable of handling such large models, to see the effect large models have on calculation speed, and if further work is needed to improve code efficiency. (authors)

97 MATHEMATICS AND COMPUTING↗

Electronic waste management approaches: An overview

Highlights: ► Human toxicity of hazardous substances in e-waste. ► Environmental impacts of e-waste from disposal processes. ► Life Cycle Assessment (LCA), Material Flow Analysis (MFA), Multi Criteria Analysis (MCA) and Extended Producer Responsibility (EPR) to and solve e-waste problems. ► Key issues relating to tools managing e-waste for sustainable e-waste management. - Abstract: Electronic waste (e-waste) is one of the fastest-growing pollution problems worldwide given the presence if a variety of toxic substances which can contaminate the environment and threaten human health, if disposal protocols are not meticulously managed. This paper presents an overview of toxic substances present in e-waste, their potential environmental and human health impacts together with management strategies currently being used in certain countries. Several tools including Life Cycle Assessment (LCA), Material Flow Analysis (MFA), Multi Criteria Analysis (MCA) and Extended Producer Responsibility (EPR) have been developed to manage e-wastes especially in developed countries. The key to success in terms of e-waste management is to develop eco-design devices, properly collect e-waste, recover and recycle material by safe methods, dispose of e-waste by suitable techniques, forbid the transfer of used electronic devices to developing countries, and raise awareness of the impact of e-waste. No single tool is adequate but together they can complement each other to solve this issue. A national scheme such as EPR is a good policy in solving the growing e-waste problems.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Possibilities and limitations of life cycle assessment (LCA) in the development of waste utilization systems - Applied examples for a region in Northern Germany

Against the background of increasing concerns about climate change, the reduction of greenhouse gas emissions has become an integral part of processes in both the waste management and the energy industries. This is reflected in the development of new waste treatment concepts, in which domestic and commercial waste is treated with the aim of utilizing its energy content, while at the same time recycling as much of its material content as possible. Life cycle assessment (LCA) represents a method of assessing the environmental relevance of a waste management system, the basis of which is a material flow analysis of the system in question. GHG emissions from different options for thermal treatment and energy recovery from waste as applied to a region in Northern Germany have been analyzed by the LCA approach and an indicative LCA, which only considers those emissions resulting from operating stages of the system. Operating stages have the main share of emissions compared to pre-processing stages. Results show that through specific separation of waste material flows and highly efficient energy recovery, thermal treatment and energy generation from waste can be optimized resulting in reduction of emissions of greenhouse gases. There are also other areas of waste utilization, currently given little attention, such as the solar drying of sewage sludge, which can considerably contribute to the reduction of greenhouse gas emissions.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗