Search NASA⌕ Search

SEARCH · Search NASA

Results for “mesoscale science”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Hydrometeor Transport and the Stratiform Water Budget in Amazonian Mesoscale Convective Systems

A significant portion of precipitation falls within the stratiform regions of mesoscale convective systems (MCSs). These regions are formed from convective clouds that have either weakened and formed a horizontally stratified structure or have advected hydrometeors to form a trailing-stratiform region, with further precipitation growth promoted by in situ dynamical and microphysical processes. Green Ocean Amazon 2014/5 (GoAmazon2014/5) field campaign observations are used to quantify the stratiform water budget of six MCSs (three each from the wet and dry seasons) utilizing the framework from Leary and Houze, with an emphasis on the transfer of hydrometeors (C A ) from the convective to the stratiform regions. The storms were predominantly leading-line/trailing-stratiform MCSs, but two had embedded convection in the stratiform region, which can complicate water budget calculations. A pulse-like pattern with a mean interval of 21 min occurs in C A during each storm resulting from a lag between the initial convective updrafts and the subsequent hydrometeor transport and sedimentation in the stratiform region. Here, the peaks in C A were followed by peaks in hydrometeor growth associated with the mesoscale updraft (C mu ) in the stratiform region. Averaged over the six storms, the positive contributions of C A and C mu to the stratiform water budget were roughly equal, although storm-to-storm variations existed. Negative contributions from evaporation below cloud base in the mesoscale downdraft and detrainment from the stratiform region into the nonprecipitating anvil cloud and environment accounted for 53% and 21% of the sum of C A and C mu , respectively, resulting in a mean stratiform region precipitation efficiency of 26%.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Moisture Recycling through Pumping by Mesoscale Convective Systems

Abstract Moisture recycling, the contribution of local evapotranspiration (ET) to precipitation, has been studied using bulk models assuming a well-mixed atmosphere. The latter is inconsistent with a climatologically stratified atmosphere that slants across latitudes. Reconciling the two views requires an understanding of overturning associated with different weather systems. In this study, we aim to better understand moisture recycling associated with mesoscale convective systems (MCSs). Using a convection-permitting WRF simulation equipped with water vapor tracers (WRF-WVT), we tag moisture from terrestrial ET in the U.S. Southern Great Plains during May 2015, when more than 20 MCS events occurred and produced significant precipitation and flooding. Water budget analysis reveals that approximately 76% of terrestrial ET is advected away from the region while the remaining 24% of terrestrial ET is “pumped” upward within the region, accounting for 12% of precipitation. Moisture recycling peaks during early night hours (1800–2400 LT) due to the mixing of the daytime accumulated ET by active convection. By focusing on five “diurnally driven” MCSs with less large-scale circulation influence than other MCSs during the same period, we find an upright pumping of terrestrial ET at the MCS initiation and development stages, which diverges into two branches during the MCS mature and decaying stages. One branch in the upper level advects the ET-sourced moisture downstream, while the other branch in the mid-to-upper level contributes to the trailing precipitation upstream. Overall, our analysis depicts a pumping mechanism associated with MCSs that mixes local ET vertically, highlighting its specific contributions to enhancing convective precipitation processes.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Advancing Organized Convection Representation in the Unified Model: Implementing and Enhancing Multiscale Coherent Structure Parameterization

To address the effect of stratiform latent heating on meso- to large-scale circulations, an enhanced implementation of the Multiscale Coherent Structure Parameterization (MCSP) is developed for the Met Office Unified Model. MCSP represents the top-heavy stratiform latent heating from under-resolved organized convection in general circulation models. We couple the MCSP with a mass-flux convection scheme (CoMorph-A) to improve storm lifecycle continuity. The improved MCSP trigger is specifically designed for mixed-phase deep convective cloud, combined with a background vertical wind shear, both known to be crucial for stratiform development. We also test a cloud top temperature dependent convective-stratiform heating partitioning, in contrast to the earlier fixed partitioning. Assessments from ensemble weather forecasts and decadal simulations demonstrate that MCSP directly reduces cloud deepening and precipitation areas by moderating mesoscale circulations. Indirectly, it amends tropical precipitation biases, notably correcting dry and wet biases over India and the Indian Ocean, respectively. Remarkably, the scheme outperforms a climate model ensemble by improving seasonal precipitation cycle predictions in these regions. The scheme also improves Madden-Julian Oscillation (MJO) spectra, achieving better alignment with observational and reanalysis data by intensifying the simulated MJO over the Indian Ocean during phases 4 to 5. However, the scheme increases precipitation overestimation over the Western Pacific. Shifting from fixed to temperature-dependent convective-stratiform partitioning reduces the Pacific precipitation overestimation and further improves the seasonal cycle in India. Spatially correlated biases highlight the necessity for advances beyond deterministic approaches to align MCSP with environmental conditions.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2008

The New Horizons Mission to Pluto and Flyby of Jupiter

New Horizons (NH) is NASA's mission to provide the first in situ reconnaissance of Pluto and its moons Charon, Nix, and Hydra. The NH spacecraft will reach Pluto in July 2015 and will then, if approved for an extended mission phase, continue on to a flyby encounter with one or more Kuiper belt objects (KBOs). NH was launched on 19 January 2006 and received a gravity assist during a flyby encounter with Jupiter (with closest approach at -32 RJ on 28 February 2007) that reduced its flight time to Pluto by 3 years. During the Jupiter flyby, NH collected a trove of multi-wavelength imaging and fields-and-particles measurements. Among the many science results at Jupiter were a detection of planet-wide mesoscale waves, eruptions of atmospheric ammonia clouds, unprecedented views of Io's volcanic plumes and Jupiter's tenuous ring system, a first close-up of the Little Red Spot (LRS), first sightings of polar lightning, and a trip down the tail of the magnetosphere. In 2015, NH will conduct a seven-month investigation of the Pluto system culminating in a closest approach some 12,500 km from Pluto's surface. Planning is presently underway for the Pluto encounter with special emphasis on longidentified science goals of studying the terrain, geology, and composition of the surfaces of Pluto and Charon, examining the composition and structure of Pluto's atmosphere, searching for an atmosphere on Charon, and characterizing Pluto's ionosphere and solar wind interaction. Detailed inspections will also be performed of the newly discovered satellites Nix and Hydra. Additionally, NH will characterize energetic particles in Pluto's environment, refine the bulk properties of Pluto and Charon, and search for additional satellites and rings.

Stern, Alan↗
DOE OSTI2021

A Global High‐Resolution Mesoscale Convective System Database Using Satellite‐Derived Cloud Tops, Surface Precipitation, and Tracking

Abstract A new methodology is developed to construct a global (60°S–60°N) long‐term (2000–2019) high‐resolution (∼10‐km h) mesoscale convective system (MCS) database by tracking MCS jointly using geostationary satellite infrared brightness temperature ( T b ) and precipitation feature (PF) characteristics from the Integrated Multi‐satellitE Retrievals for GPM precipitation data sets. Independent validation shows that the satellite‐based MCS data set is able to reproduce important MCS statistics derived from ground‐based radar network observations in the United States and China. We show that by carefully considering key PF characteristics in addition to T b signatures, the new method significantly improves upon previous T b ‐only methods in detecting MCSs in the midlatitudes for all seasons. Results show that MCSs account for over 50% of annual total rainfall across most of the tropical belt and in selected regions of the midlatitudes, with a strong seasonality over many regions of the globe. The tracking database allows Lagrangian aspects such as MCS lifetime and translational speed and direction to be analyzed. The longest‐lived MCSs preferentially occur over the subtropical oceans. The land MCSs have higher cloud‐tops associated with more intense convection, and oceanic MCSs have much higher rainfall production. While MCSs are observed in many regions of the globe, there are fundamental differences in their dynamic and thermodynamic structures that warrant a better understanding of processes that control their evolution. This global database provides significant opportunities for observational and modeling studies of MCSs, their characteristics, and roles in regional and global water and energy cycles, as well as their hydrologic and other impacts.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Vertical Structure and Ice Production Processes of Shallow Convective Postfrontal Clouds over the Southern Ocean in MARCUS. Part I: Observational Study

A study of the vertical structure of postfrontal shallow clouds in the marine boundary layer over the Southern Ocean is presented here. The central question of this two-part study regards cloud phase (liquid/ice) of precipitation, and the associated growth mechanisms. In this first part, data from the Measurements of Aerosols, Radiation, and Clouds over the Southern Ocean (MARCUS) field campaign are analyzed, starting with a 75-h case with continuous sea surface-based thermal instability, modest surface heat fluxes, an open-cellular mesoscale organization, and very few ice nucleating particles (INPs). The clouds are mostly precipitating and shallow (tops mostly around 2 km above sea level), with weak up- and downdrafts, and with cloud-top temperatures generally around –18° to –10°C. Further, the case study is extended to three other periods of postfrontal shallow clouds in MARCUS. While abundant supercooled liquid water is commonly present, an experimental cloud-phase algorithm classifies nearly two-thirds of clouds in the 0° to –5°C layer as containing ice (cloud ice, snow, or mixed phase), implying that much of the precipitation grows through cold-cloud processes. The best predictors of ice presence are cloud-top temperature, cloud depth, and INP concentration. Measures of convective activity and turbulence are found to be poor indicators of ice presence in the studied environment. The water-phase distribution in this cloud regime is explored through numerical simulations in Part II. Significance Statement: Climate models generally predict a lower albedo than observed over the Southern Ocean, and this is largely attributed to a lack of cloudiness, especially in the postfrontal cold sector of midlatitude cyclones. This in turn may be due to an excess of ice in these simulated clouds, resulting in rapid precipitation fallout and an overly brief cloud lifespan. The objective of this study is to examine whether shallow postfrontal clouds over the Southern Ocean are dominated by supercooled drops, or by snow and ice, using data collected by a U.S. Department of Energy Atmospheric Radiation Measurement Mobile Facility deployed aboard an Australian Antarctic supply vessel. We find that these clouds contain much supercooled liquid, even though cloud-top temperatures generally are around –18° to –8°C, and that about two-thirds of the clouds just above the freezing level contain ice. Much of the precipitation appears to grow through cold-cloud processes above the freezing level, rather than drizzle/rain. Updrafts and/or turbulence in convection or in cloud-top generating cells do not initiate much ice, compared to observations elsewhere in a similar temperature range. This may be attributable to the extremely low concentration of ice nucleating particles in this environment. Ultimately, the deepest clouds with the coldest cloud tops are most likely to be ice dominated.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Quantifying the Thermodynamic Impacts on the Atmospheric Boundary Layer due to the Sea Breeze in the Coastal Houston Region

The atmospheric boundary layer (ABL) is unique in coastal regions because of kinematic and thermodynamic influences from continental and marine environments. Sea-breeze (SB) circulations act to equilibrate the land–sea temperature gradient through advecting marine air onshore. The strength of the SB varies in terms of stability, temperature, and moisture advection and influences air quality and weather forecasts. The Tracking Aerosol Convection Interactions Experiment (TRACER) collected a wealth of data on coastal boundary layer evolution, including observations from uncrewed aerial systems (UASs). Vertical profiles of temperature, humidity, and winds were collected by the OU CopterSonde UAS from June to September in the coastal region of Houston. These profiles offer 5-m vertical resolution, on average, every 30 min through diurnal transitions, SB events, and nearby deep convection. During the campaign, CopterSonde observations were gathered through 17 SB events, six of which led to convection initiation. The UAS data can resolve the thermodynamic evolution and interactions between the SB and the preexisting convective boundary layer. Results show large variability across observed SBs and their impacts on temperature and moisture. The intensity of thermodynamic changes depends on the time of sea-breeze passage and influence from the Galveston Bay Breeze, a secondary marine circulation commonly observed in this region. In quantifying the spectrum of SB impacts, equivalent potential temperature θ e is used to contextualize its role in convection initiation and evolution. In conclusion, while all SBs tend to increase θ e from moisture advection, the rate and timing of the θ e rise can distinguish convective from nonconvective cases.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Influences of the South American Low-Level Jet on the Convective Environment in Central Argentina Using a Convection-Permitting Simulation

This study documents the spatial and temporal distribution of the South American low-level jet (SALLJ) and quantifies its impact on the convective environment using a 6.5-month convection-permitting simulation during the Remote Sensing of Electrification, Lightning, And Mesoscale/Microscale Processes with Adaptive Ground Observations and Clouds, Aerosols, and Complex Terrain Interactions (RELAMPAGO-CACTI) campaigns. Overall, the simulation reproduces the observed SALLJ characteristics in central Argentina near the Sierras de Córdoba (SDC), a focal point for terrain-focused upscale growth. SALLJs most frequently occur in the summer with maxima to the northwest and east of the SDC and minima over the higher terrain. The shallower SALLJs (<1750 m) have a strong overnight skew, while the elevated jets are more equally spread throughout the day. SALLJ periods often have higher amounts of low-level moisture and instability compared to non-SALLJ periods, with these impacts increasing over time when the SALLJ is present and decreasing afterward. The SALLJ may enhance low-level wind shear magnitudes (particularly when accounting for the jet height); however, enhancement is somewhat limited due to the presence of speed shear in most situations. SALLJ periods are associated with low-level directional shear favorable for organized convection and an orientation of cloud-layer wind shear parallel to the terrain, which could favor upscale growth. A case study is shown in which the SALLJ influenced both the magnitude and direction of wind shear concurrent with convective upscale growth near the SDC. This study highlights the complex relationship between the SALLJ and its impacts during periods of widespread convection.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

EFRC Accomplishments: Integrated Mesoscale Architectures for Sustainable Catalysis (IMASC)

The vision of IMASC is to advance the fundamental science necessary to alter fundamental aspects of the chemical industries sector and its carbon footprint. The IMASC mission is to develop design principles for increasing the efficiency of key chemical syntheses using dilute alloy catalysts by quantitatively scaling from model studies to catalytic operation using advanced experiment and theory. One of the major challenges in catalysis is predicting catalytic behavior—especially selectivity. The IMASC team developed a methodology for obtaining critical information for selected catalytic processes using dilute alloy catalysts, that is widely applicable to modeling catalytic processes.

36 MATERIALS SCIENCE↗
DOE OSTI2020

A high-resolution database of mesoscale convective systems and isolated deep convection in the United States for 2004 – 2017

The database provides high-resolution (4-km, hourly) information of mesoscale convective systems (MCSs) and isolated deep convection events (IDC) east of the Rocky Mountains over the contiguous United States from 2004 – 2017. The database contains various characteristics of MCSs and IDC, such as their lifecycle evolutions, lifetimes, spatial coverages, echo-top heights, precipitation features, convective and stratiform separation, convective core features, propagation speed, etc.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

A high-resolution database of mesoscale convective systems and isolated deep convection in the United States for 2004 – 2017

The database provides high-resolution (4-km, hourly) information of mesoscale convective systems (MCSs) and isolated deep convection events (IDC) east of the Rocky Mountains over the contiguous United States from 2004 – 2017. The database contains various characteristics of MCSs and IDC, such as their lifecycle evolutions, lifetimes, spatial coverages, echo-top heights, precipitation features, convective and stratiform separation, convective core features, propagation speed, etc.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1984

Atmospheric science experiments applicable to Space Shuttle Spacelab missions

The present lack of a lower atmosphere research satellite program for the 1980s has prompted consideration of the Space Shuttle/Spacelab system as a means of flying sensor complements geared toward specific research problems, as well as continued instrument development. Three specific examples of possible science questions related to precipitation are discussed: (1) spatial structure of mesoscale cloud and precipitation systems, (2) lightning and storm development, and (3) cyclone intensification over oceanic regions. Examples of space sensors availab le to provide measurements needed in addressing these questions are also presented. Distinctive aspects of low-earth orbit experiments would be high resolution, multispectral sensing of atmospheric phenomena by complements of instruments, and more efficient sensor development through reflights of specific hardware packages.

Wilson, G. S.↗
NASA NTRS2022

Atmospheric Research 2020 Technical Highlights

Welcome to the 2020 Atmospheres Highlights report. Here we summarize research and scientific communication/outreach accomplishments from the portion of atmospheric science activities at NASA’s Goddard Space Flight Center (GSFC) that comprises the Earth Science Division’s Atmospheres organization. As in previous years, this report is intended for a broad audience, including colleagues within NASA, scientists outside the Agency, science graduate students, and members of the public. Organizationally, the report covers research activities under the Office of Deputy Organizationally, the report covers research activities under the Office of Deputy Director for Atmospheres (610AT), which is within Earth Sciences Division (Code Director for Atmospheres (610AT), which is within Earth Sciences Division (Code 610) in the Sciences and Exploration Directorate (600). Laboratories and office within 610) in the Sciences and Exploration Directorate (600). Laboratories and office within 610AT include: Mesoscale Atmospheric Processes Laboratory (612), Climate and 610AT include: Mesoscale Atmospheric Processes Laboratory (612), Climate and Radiation Laboratory (613), Atmospheric Chemistry and Dynamics Laboratory (614), Radiation Laboratory (613), Atmospheric Chemistry and Dynamics Laboratory (614), and the Wallops Field Support Office (610.W). As of this writing, the 277 personnel and the Wallops Field Support Office (610.W). As of this writing, the 277 personnel in Code 610AT consist of 53 civil servants and 224 cooperative agreement associates, in Code 610AT consist of 53 civil servants and 224 cooperative agreement associates, postdoctoral fellows and contractors, postdoctoral fellows and contractors.

Annual Report↗
NASA NTRS2022

Atmospheric Research 2021 Technical Highlights

Welcome to the 2021 Atmospheres Highlights report. Here, we summarize research and scientific communication/outreach accomplishments from the portion of atmospheric science activities at NASA’s Goddard Space Flight Center (GSFC) that comprises the Earth Science Division’s Atmospheres organization. As in previous years, this report is intended for a broad audience, including colleagues within NASA, scientists outside the Agency, science graduate students, and members of the public. Organizationally, the report covers research activities under the Office of Deputy Director for Atmospheres (610AT), which is within Earth Sciences Division (Code 610) in the Sciences and Exploration Directorate (600). Laboratories and office within 610AT include: Mesoscale Atmospheric Processes Laboratory (612), Climate and Radiation Laboratory (613), Atmospheric Chemistry and Dynamics Laboratory (614), and the Wallops Field Support Office (610.W). As of this writing, the 266 personnel in Code 610AT consist of 53 civil servants and 213 cooperative agreement associates, postdoctoral fellows and contractors.

Annual Report↗
DOE OSTI2020

Volumetric analysis and mesh generation of real and artificial microstructural geometries

Producing a viable finite element mesh of realistic microstructural structural geometry is a critical step in analyzing the thermo-mechanical behavior of complex multi-material composites. Advancements in imaging technology such as micro computed tomography have allowed modelers to access high resolution mesoscale geometries for direct numerical simulation. However, converting from voxel based 3D images to usable finite element meshes has been challenging. A robust method including algorithms and software scripts for generating finite element meshes from 3D imaged microstructures is presented in this paper. It includes a routine for inserting cohesive elements around material interfaces to enable modeling of interface properties including delamination and damage. The algorithms and procedures presented in this method leverage currently available software packages for processing surface based geometry into volume based meshes. In addition to converting real geometry from physical imaging systems, algorithms for producing numerically generated and statistically equivalent microstructural geometry are also included. These artificial microstructures can be a valuable resource for modelers when physical specimens do not exist or are limited in quantity: Method establishes a workflow from voxel data to viable finite element mesh including interface information, and Includes a method for synthetic geometry generation based on metrics from real microstructures.

36 MATERIALS SCIENCE↗
NASA NTRS2014

Attendee Response to Guiding Questions of the September 2014 DOE Workshop on North Slope of Alaska Priorities

We advocate for several modeling approaches suitable to prove understanding of and capability to model aerosol behavior in nucleating droplets and ice and to model regional cloud systems at the mesoscale. The full complement of data that is ideal for particular study types is increasingly well understood; the ASR ISDAC Science Plan provides an excellent example of listing the data required for each study type targeted by that campaign. Whereas discussion here focused on the microscale and mesoscale, other studies should obviously focus on the regional, seasonal and global scale. When considering ice microphysics alone, laser focus on unconstrained model components could be usefully intensified (e.g., collision-coalescence kernels). Similarly, a focus on boundary layer structure would be deeply valuable to a wide range of model types. The expense of observations motivates efficient planning for observational data sets to support specific study approaches; the concept of closure is often useful (e.g., the surface energy budget).

nucleation↗
DOE OSTI2024

Characterizing Wet Season Precipitation in the Central Amazon Using a Mesoscale Convective System Tracking Algorithm

To comprehensively characterize convective precipitation in the central Amazon region, we utilize the Python FLEXible object TRacKeR (PyFLEXTRKR) to track mesoscale convective systems (MCSs) observed through satellite measurements and simulated by the Weather Research and Forecasting model at a convection-permitting resolution. This study spans a 2-month period during the wet seasons of 2014 and 2015. We observe a strong correlation between the MCS track density and accumulated precipitation in the Amazon basin. Key factors contributing to precipitation, such as MCS properties (number, size, rainfall intensity, and movement), are thoroughly examined. Our analysis reveals that while the overall model produces fewer MCSs with smaller mean sizes compared to observations, it tends to overpredict total precipitation due to excessive rainfall intensity for heavy rainfall events (≥10 mm hr –1 ). These biases in simulated MCS properties could vary with the constraints on the convective background environment. Moreover, while the wet bias from heavy (convective) rainfall outweighs the dry bias in light (stratiform) rainfall, the latter can be crucial, particularly when MCS cloud cover is significantly underestimated. A case study for 1 April 2014 highlights the influence of environmental conditions on the MCS lifecycle and identifies an unrealistic model representation in both stratiform and convective precipitation features.

54 ENVIRONMENTAL SCIENCES↗