Search NASA⌕ Search

SEARCH · Search NASA

Results for “metal plasticity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Non-local large-strain FFT-based formulation and its application to interface-dominated plasticity of nano-metallic laminates

Here, this paper presents a novel formulation and its robust numerical implementation of strain-gradient (SG) crystal plasticity within a large-strain (LS) elasto-viscoplastic (EVP) fast Fourier transform (FFT)-based micromechanical model. The resulting non-local SG-LS-EVPFFT formulation is used to model and understand the process of kink band formation during layer-parallel compression of nano-metallic laminates (NMLs). NMLs are layered composites with nanoscale thicknesses, thus requiring consideration of the interaction between dislocations and interfaces within the micromechanical model. The length-scale parameter of the SG model is calibrated by simulating a double pile-up and comparing predictions to analytical solution. This required new expressions for the defect energy, resulting in more accurate double pile-up predictions. The calibrated SG-LS-EVPFFT model is then used to simulate layer-parallel compression of copper-niobium NML. Formation of kink bands is predicted, and the model is used to rationalize the microscopic mechanisms enabling the formation process. It is found that accumulation of dislocations at interfaces leads to activation of layer-parallel slip, which in turn leads to kink band formation.

36 MATERIALS SCIENCE↗
NASA NTRS1986

Making a Lightweight Battery Plaque

Plaque formed in porous plastic by electroless plating. Lightweight plaque prepared by electroless plating of porous plastic contains embedded wire or expanded metal grid. Plastic may or may not be filled with soluble pore former. If it contains soluble pore former, treated to remove soluble pore former and increase porosity. Porous plastic then clamped into rig that allows plating solutions to flow through plastic. Lightweight nickel plaque used as electrode substrate for alkaline batteries, chiefly Ni and Cd electrodes, and for use as electrolyte-reservoir plates for fuel cells.

Reid, M. A.↗
DOE OSTI2022

The mechanical behavior of metal-halide perovskites: Elasticity, plasticity, fracture, and creep

Wide ranging mechanical properties — elasticity, plasticity, fracture, and creep — most relevant to the mechanical reliability of perovskite solar cells (PSCs) are systematically investigated. High quality bulk single-crystals of the commonly studied metal-halide perovskites (MHPs) relevant to PSCs are fabricated and studied: CH 3 NH 3 PbBr 3 (MAPbBr 3 ) and CH 3 NH 3 PbI 3 (MAPbI 3 ). The first direct measurement of MHP Young's modulus (E) using uniaxial compression reveals E <100> of 13.1 ± 1.3 and 10.6 ± 1.0 GPa for MAPbBr 3 and MAPbI 3 , respectively. Further, the Vickers micro-hardness H (100) of MAPbBr 3 and MAPbI 3 is 0.54±0.02 GPa and 0.76±0.05 GPa, respectively. The Vickers micro-indentation fracture toughness K IC of MAPbBr 3 and MAPbI 3 is estimated at 0.20±0.03 MPa∙m 0.5 and 0.18±0.03 MPa∙m 0.5 , respectively. The stress-exponent, n, extracted from nanoindentation creep data is ~8 and ~10 for MAPbBr 3 and MAPbI 3 , respectively. The trends in these properties are discussed. These properties are best estimates and are recommended for use in future mechanical behavior and reliability analyses of MHPs and PSCs.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Impact of the plastic deformation microstructure in metals on the kinetics of recrystallization: A phase-field study

The sensitivity of recrystallization kinetics in metals to the heterogeneity of microstructure and deformation history is a widely accepted experimental fact. However, most of the available recrystallization models employ either a mean field approach or use grain-averaged parameters, and thus neglecting the mesoscopic heterogeneity induced by prior deformation. Here in the present study, we investigate the impact of deformation-induced dislocation (subgrain) structure on the kinetics of recrystallization in metals using the phase-field approach. The primary focus here is upon the role of dislocation cell boundaries. The free energy formulation of the phase-field model accounts for the heterogeneity of the microstructure by assigning localized energy to the resulting dislocation microstructure realizations generated from experimental data. These microstructure realizations are created using the universal scaling laws for the spacing and the misorientation angles of both the geometrically necessary and incidental dislocation boundaries. The resulting free energy is used into an Allen-Cahn based model of recrystallization kinetics, which are solved using the finite element method. The solutions thus obtained shed light on the critical role of the spatial heterogeneity of deformation in the non-smooth growth of recrystallization nuclei and on the final grain structure. The results showed that, in agreement with experiment, the morphology of recrystallization front exhibits protrusions and retrusions. By resolving the subgrain structure, the presented algorithm paves the way for developing predictive kinetic models that fully account for the deformed state of recrystallizing metals.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Atomistic Study of the Plastic Deformation of Transition Metals and High Entropy Alloys (Final Report)

The overarching goal of the research performed in the studies supported by the DOE Basic Energy Sciences has been investigation of mechanical properties of materials employed in technologies related to energy production and conversion using atomic level computer modeling. The materials studied are body-centered-cubic (BCC) transition metals, including α-iron, their alloys and most recently also compositionally complex, so called high entropy alloys (HEAs), which are believed to become future materials in high temperature applications. The goal of the research has been to achieve atomic level understanding of the deformation and fracture of these materials starting from the electronic structure, coarse grain the material energetics into potentials describing interaction between atoms and proceed via atomistic modeling and mesoscopic models to investigation of the glide of dislocations and thus advance the theory of plastic deformation of studied materials.

36 MATERIALS SCIENCE↗
DOE OSTI2025

2024 Second Half Semi Annual Report: Modeling plasticity-mediated flow in metals with pressurized cavities

The objective is to better predict the bulk-scale mechanical behavior of porous metals that have over pressurized cavities (e.g., irradiated metals with helium bubbles) by quantifying the complex coupling among cavity aspects (e.g., size distribution, inhomogeneous overpressure values, spatial arrangement) and metal properties (e.g., rate-dependency, crystallographic lattice). This requires up-scaling local mechanical fields from the single crystal scale and will be accomplished using a homogenization approach that combines full-field numerical simulations, analytical formalisms, and physics-informed machine learning to produce symbolically-defined constitutive equations (e.g., gauge functions). These equations will satisfy the objective because they enable computationally efficient predictions that approach the accuracy of computationally expensive full-field numerical simulations, abide by theoretical requirements (e.g., conservation of energy, work conjugacy), and retain the transparency of analytical models.

36 MATERIALS SCIENCE↗
NASA NTRS1940

Tensile Elastic Properties of Typical Stainless Steels and Nonferrous Metals as Affected by Plastic Deformation and by Heat Treatment

A general discussion is given of the relationships between stress, strain, and permanent set. From stress-set curves are derived proof stresses based on five different percentages of permanent set. The influence of prior plastic extension on these values is illustrated and discussed. A discussion is given of the influence of work-hardening, rest interval, and internal stress on the form of the proof stress-extension curve.

Mcadam, D J↗
DOE OSTI2020

Applying Improved Optical Recognition with Machine Learning on Sorting Cu Impurities in Steel Scrap

Annually, 20–55 million tons of electronic waste (e-waste) is produced worldwide (5% of all municipal solid waste). Although e-waste embodies only 2% of America’s municipal waste, it accounts for a significantly larger proportion of the heavy metals and flame retardants present in the waste stream. Currently, less than 20% of all e-waste is recycled in the United States because the heterogeneity of the feedstock limits the opportunity for reuse in high value products and processing of the waste itself is often too costly to justify handling. To address this concern, the aims of this study are: 1) to identify the major plastic and metal compositions within electronic shredder residue (ESR), 2) to formulate solvents and processing conditions to separate 90% of the plastics targeted from consumer shred ESR, and 3) to develop a process design model to estimate the cost and energy efficiency of the proposed solvent-based processing. In this study, a pre-sorted heterogeneous ESR feedstock (one where aluminum, magnetic components, and hazardous battery materials removed by an e-waste recycling facility) was used, with the major compositions of the ESR characterized. It was found that 25 wt.% of the feedstock was composed of plastics, 6 wt.% rubber, 27 wt.% printed circuit boards, 23% wire, and the remainder metals and capacitors. Within the plastic portion, polystyrene (PS, 40 wt.%), acrylonitrile butadiene styrene (ABS, 25 wt.%), and styrene-acrylonitrile (SAN, 9wt.%) were identified to compose the majority of the screened plastics using Fourier transform infrared spectroscopy (FTIR). Next, selective solvents were screened using Hansen Solubility Parameter Theory (HSP) for dissolving PS and ABS. The pre-screening results show that methylene chloride (dichloromethane, DCM) and tetrahydrofuran (THF) are capable of dissolving the most PS and ABS, while methanol (MeOH) and ethylene glycol (EG) are capable of precipitating the most PS and ABS. These solvents were subsequently used to recover polymers and remove. flame retardants within the ESR feedstock. By optimizing the dissolution time and the solvents used, the highest polymer dissolution yield (99 wt.%%) was achieved using DCM for 48 hr. Both pre-screened anti-solvents (MeOH and EG) showed the highest polymer precipitation yield (71 wt.%). In terms of flame retardant removal rate, EG was found to have a high phosphorus-containing flame retardant removal rate (up to 98%). Characterization shows that the proposed solvent-based processing can preserve a high molecular weight fraction of the polymers and effectively remove flame retardants. Cost analysis indicates that the amount of the solvent/anti-solvent recovered after the reaction would play a critical role in reducing the operating costs. The energy analysis shows that the proposed solvent-based processes can save up to 60% of the embodied energy used to manufacture plastics used in electronics (PS and ABS were used for calculations). The results from this project prove the potential of solvent-based processing to produce secondary materials (plastics and metals) from e-waste for cross-industry reuse.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Optimizing the Internal Cell Structure of the Radon Monitor Based on Electrostatic Collection Method

Abstract As Rn-222 decays, an alpha particle is emitted and the residual polonium nucleus recoils in the opposite direction. At the end of the recoil path, 88% of the polonium atoms have a positive charge and 12% are neutral. The electric potential distribution in the 60 ml hemispherical internal cell of the radon monitor based on electrostatic collection is studied for reducing the combined probability of the positively charged Po-218 and the OH− produced by the ionization of water vapour in the air. The COMSOL software is used to simulate the electric potential distribution in the internal cell of the radon monitor based on the electrostatic collection method at 27°C, a pressure of 0.1 Mpa. For improving the collection efficiency of Po-218 ions, the average collection time along vertical and oblique lines is calculated when the upper surface of the internal cell is plastic, uncharged metal and charged metal, respectively. Assuming that the gas in the internal cell is uniformly distributed, the results show that if the upper surface of the hemispherical internal cell is plastic or uncharged metal, the electric potential formed in the internal cell is more uniform, and it is beneficial to reduce the total collection time of the positively charged Po-218 ions, thereby improving collection efficiency. The simulation results can be used as an effective reference for optimizing the design of the internal cell structure of the radon monitor based on electrostatic collection method.

Fan, Zhongkai (ORCID:0000000181247459)↗
DOE OSTI2024

Integrated positron emission particle tracking (PEPT) and X-ray computed tomography (CT) imaging of flow phenomena in twisted tape swirl flow

Abstract A combined positron emission particle tracking (PEPT) and X-ray computed tomography (CT) technique is presented, and its utility is demonstrated through investigation of flow in a pipe with twisted tape swirl insert with varying flow conditions (diameter-based Reynolds numbers 16,300–63,300). A description of this technique is given, as well as data handling practices used to relate geometric information captured by CT to fluid flow data gathered via PEPT. It is found that the CT component is readily capable of capturing the stainless steel insert geometry in this present system, but the use of combined plastic and metal materials leads to artifacts in imaging of the plastic surface. Nonetheless, CT data are related to PEPT flow measurements, and average velocity fields are calculated via a pseudo-framing and interpolation scheme and used to visualize and interrogate key flow phenomena within the system. Radial velocity profiles of the mean flow characteristics are seen to collapse to a nearly common form across all flow conditions considered. Helical vortices are seen propagating through the flow field, generated by bypass flow around the gap between the insert and pipe wall, with additional coherent secondary flow structures seen in the higher Reynolds number cases. These findings enhance the understanding of the mixing mechanisms in these swirl flows and encourage the continued development of PEPT-CT methodologies for 3D flow measurements in optically inaccessible systems.

42 ENGINEERING↗
NASA NTRSDate not supplied

Uncertainty Reduction With Multi-Model Monte Carlo for Crystal Plasticity Simulations of Additively Manufactured Metals

In this work, multi-model Monte Carlo estimators are developed to reduce uncertainty in quantities of interest (QoIs) extracted from crystal plasticity simulations of additively manufactured (AM) metals. A significant concern in AM parts is uncertainty in mechanical properties caused in part by complex microstructures that arise from the AM process. Quantifying uncertainty in microstructure-sensitive behavior using experiments alone is costly, especially when mechanical allowables must be established. Quantitative relationships among microstructure, micromechanical metrics like slip accumulation, crack initiation, and failure are also difficult to capture with limited experiments. Crystal plasticity material models instead enable computational prediction of micromechanical stress and strain fields given a discretized microstructure. However, high-fidelity finely discretized crystal plasticity simulations are computationally expensive, while lower-fidelity models are less accurate and generally biased, making uncertainty quantification and reduction computationally difficult as well. Multi-model Monte Carlo methods leverage correlations between high- and low-fidelity models to produce unbiased estimators for QoIs with reduced uncertainty relative to standard Monte Carlo. Crystal plasticity QoIs considered in this work include yield strength and the mean and extreme values of micromechanical fields that are relevant to crack initiation. Multi-model Monte Carlo estimators are developed for each individual QoI and several groups of QoIs. The results of this work establish relationships among model correlations, sample allocation, and uncertainty reduction for different combinations of QoIs and demonstrate a trend of less uncertainty reduction as QoIs become more sensitive to local microstructure. Limitations from using pilot samples to estimate model covariances and train low-fidelity models are also addressed. The uncertainty reduction achieved by multi-model Monte Carlo is an important step toward using computational mechanics models to predict microstructure-sensitive crack initiation and failure in AM parts.

uncertainty quantification↗
NASA NTRS1989

Invisible Braces

Ceradyne, Inc., and 3M Unitek were assisted in the development of Ceramic braces by NIAC/USC. The braces are marketed by Unitek/3M, and are made from translucent polycrystalline alumina (TPA). They are designed for each tooth, connected by a thin metal wire, are strong, aesthetically appealing and as effective clinically as plastic or metal appliances.

Source record↗
NASA NTRS1978

Friction and wear of metals with a single-crystal abrasive grit of silicon carbide: Effect of shear strength of metal

Sliding friction experiments were conducted with spherical, single-crystal silicon carbide riders in contact with various metals and with metal riders in contact with silicon carbide flats. Results indicate that: (1) the friction force in the plowing of metal and (2) the groove height (corresponding to the volume of the groove) are related to the shear strength of the metal. That is, they decrease linearly as the shear strength of the bulk metal increases. Grooves are formed in metals primarily from plastic deformation, with occasional metal removal. The relation between the groove width D and the load W can be expressed by W = kD, superscript n which satisfies Meyer's law.

Miyoshi, K.↗