Search NASA⌕ Search

SEARCH · Search NASA

Results for “methanol oxidation reaction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Selective activation of methane C–H bond in the presence of methanol

Direct methane to methanol (MTM) conversion over heterogeneous catalysts is a promising route for valorization of methane. The methane C-H bond activation is considered as the key step of the MTM and is the focus of considerable research activity. However, the formed methanol typically suffers from overoxidation largely due to the cleavage of a methanol C-H bond, whose bond dissociation energy is ca. 0.5 eV lower than that of the methane C-H bond, which usually translates to a transition state energy of the methanol C-H bond cleavage that is ca. 0.55 eV lower than that of methane whenever the reactions proceed through a radical mechanism. Furthermore, we propose a general approach for decreasing the transition state energy difference between the CH 4 and CH 3 OH C-H bond dissociation. When a metal-oxide supported cationic transition metal atom and a neighboring oxygen on the oxide surface serve as the active site, the transition state energy difference through a surface-stabilized pathway can be noticeably narrowed as compared with that of a radical pathway. For Ir, Pt and Rh-doped anatase TiO 2 (101), the CH 4 C-H bond activation can be preferred over that of CH 3 OH at significant methanol mole fraction. Also, for PdAu alloys containing adsorbed oxygen and positively charged Pd, calculations suggest in agreement with recent experiments (Science 367 (6474), 193-197) that the CH 4 C-H bond can be selectively activated in the presence of CH 3 OH.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

In Situ Studies of Copper-Zirconia-Zinc Oxide Model Catalysts for CO 2 Hydrogenation

A combination of in situ X-ray photoelectron spectroscopy (XPS) and infrared reflection absorption spectroscopy (IRAS) was used to investigate the formation of surface intermediates from CO 2 hydrogenation on copper-zirconia-zinc oxide model catalysts under reaction conditions. Copper clusters with different numbers of atoms (n = 1, 4, 13) were deposited onto bare and ZrO 2 -modified ZnO powder supports to systematically examine the effects of Cu cluster size and the synergy between metal and metal-oxide components. Under low pressure CO 2 hydrogenation conditions (CO 2 :H 2 = 1:9, 0.4 mbar, 300–600 K), XPS and IRAS identify the most prominent intermediates as carbonate (CO 3 *), formate (HCOO*) and methoxy (CH 3 O*), which is the final surface-bound intermediate leading to methanol. The temperature profiles are consistent with a mechanism in which CO 2 is adsorbed as carbonate species (HCO 3 *, CO 3 *) followed by hydrogenation reactions to formate (HCOO*) and methoxy (CH 3 O*), but the relative yields strongly depend on surface composition. Specifically, the presence of ZrO 2 promotes CO 2 adsorption and activation and improves the thermal stability of the Cu clusters against loss of surface area. Moreover, the ternary Cu 4 /ZrO 2 /ZnO surface is significantly more active than Cu 4 /ZnO and ZrO 2 /ZnO surfaces for the formation of methoxy (CH 3 O*), indicating that Cu–ZrO 2 interfaces promote the formation of key intermediates leading to methanol. Finally, the yields of intermediates are similar for all Cu cluster sizes (Cu 1 , Cu 4 and Cu 13 ), indicating that the primary role of Cu is to provide H atoms via H 2 dissociation and spillover. In conclusion, these molecular-level insights provide a fundamental understanding of the enhanced efficiency of ternary Cu–ZrO 2 –ZnO catalysts and establish design principles for developing improved catalysts for CO 2 conversion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Lignin Derived Ionic Liquids: Synthesis and Application for Biopolymer Processing (CRADA Final Report)

We have established a scalable and economically viable process to convert lignin into ionic liquids for use in biopolymer processing. We have studied the four main topics: 1) lignin depolymerization to produce vanillin through oxidation, 2) lignin reduction to produce guaiacols, 3) oxidation process scale up, and 4) ionic liquid synthesis and application for biopolymer processing. The main accomplishment is summarized below: A maximal vanillin yield of 4.9% (8.8% total product yield) was achieved under optimal oxidation conditions using design of experiments (DOE); Aminophenol with 94.5% purity was synthesized via reductive amination using vanillin isolated from ion-exchange chromatography; At a higher lignin loading (10%), the vanillin yield in the scale up reaction was lower than the bench scale reaction; The filtration-based downstream separation of the scale-up process was able to recover 76% of vanillin; A maximal lignin reduction product (guaiacols) yield of 6.5% was achieved in the presence of Ru/C, formic acid, and methanol; The lignin reduction product yield and composition were affected by the use of different solvent and catalytic reagents (methanol in combination of Ru/C and formic acid gives the highest product yield); Lignin oxidation and reduction products: vanillin, acetovanillone, guaiacols, and eugenol are successfully used for IL synthesis; XX based ILs showed cellulose solubility with up to xx%; Technoeconomic analysis results indicate the potential of producing affordable ILs from kraft lignin (MSP: $14/kg); Life-cycle assessment results show the potential to reduce GHG emissions by up to 85% relative to existing ILs ([Ch][Lys]) with GHG emission: 1.2 kg CO 2e /kg of IL produced.

09 BIOMASS FUELS↗
DOE OSTI2022

Numerical Study of PAHs and Soot Emissions from Gasoline–Methanol, Gasoline–Ethanol, and Gasoline– n -Butanol Blend Surrogates

Soot formation is an intricate phenomenon, and soot propensity of a fuel is interwoven with the fuel composition, physical and chemical properties, and combustion environment. Here, the present study examines the hypothesis that in addition to the chemical composition of the fuel, the sooting nature of the fuel is closely coupled with its chemical property known as octane sensitivity (S). With this motivation, the present study numerically investigates the effects of gasoline surrogate composition and its property, octane sensitivity (S), on polycyclic aromatic hydrocarbons (PAHs) and soot emissions. Four-component toluene primary reference fuel (TPRF)–alcohol blends, comprising iso-octane, n-heptane, toluene, and one of the three different alcohols- methanol, ethanol, and n-butanol, are used as gasoline surrogates. A total of 320 TPRF–alcohol mixtures, with S in the range of 1–10, are examined under laminar counterflow diffusion flame conditions. A detailed chemical mechanism coupled with a comprehensive soot model, which includes reactions for soot inception, surface growth, PAH condensation, and oxidation, is adopted. The analysis indicates that the toluene content in the fuel mixture has a prominent effect, while the alcohol content and octane sensitivity of the fuel have a weak correlation with the PAHs and soot. Thus, it is not clear if any of these three variables, namely, toluene content in the fuel, alcohol content in the fuel, and S, are individually sufficient to characterize the PAHs and soot across various blends. For this reason, a new variable (X CHO ) based on the elemental composition of the fuel mixture is identified and it is shown that X CHO along with S of the fuel characterize soot emissions satisfactorily. Further, a reaction path analysis indicates that the efficacy of alcohols in reducing soot emissions follows the order: methanol > ethanol > n-butanol.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

The state of zinc in methanol synthesis over a Zn/ZnO/Cu(211) model catalyst

The active chemical state of zinc (Zn) in a zinc-copper (Zn-Cu) catalyst during carbon dioxide/carbon monoxide (CO 2 /CO) hydrogenation has been debated to be Zn oxide (ZnO) nanoparticles, metallic Zn, or a Zn-Cu surface alloy. We used x-ray photoelectron spectroscopy at 180 to 500 millibar to probe the nature of Zn and reaction intermediates during CO 2 /CO hydrogenation over Zn/ZnO/Cu(211), where the temperature is sufficiently high for the reaction to rapidly turn over, thus creating an almost adsorbate-free surface. Tuning of the grazing incidence angle makes it possible to achieve either surface or bulk sensitivity. Hydrogenation of CO 2 gives preference to ZnO in the form of clusters or nanoparticles, whereas in pure CO a surface Zn-Cu alloy becomes more prominent. Here, the results reveal a specific role of CO in the formation of the Zn-Cu surface alloy as an active phase that facilitates efficient CO 2 methanol synthesis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

CO 2 Adsorption and Hydrogenation on Inverse InO x /Cu(111) Catalysts: Active Role of the Oxide–Metal Interface

The direct conversion of carbon dioxide (CO 2 ) into methanol via hydrogenation is essential for industrial applications. Recent studies on catalysts that contain an inverse oxide/metal configuration have shown very good catalytic performance for the CO 2 hydrogenation to methanol process. Here, in this study, we investigated the behavior of indium oxide-Cu(111) interfaces under pure CO 2 and CO 2 /H 2 mixtures using synchrotron-based ambient-pressure X-ray photoelectron spectroscopy (AP-XPS). Initially, a single layer of copper oxide (Cu x O) was grown on the Cu(111) surface by controlled oxidation. On this surface, indium was deposited at room temperature. Oxygen atoms transferred from Cu x O/Cu(111) to the indium metal upon deposition, forming In-O-Cu bonds and active interfaces. Although Cu(111) is not very active for the binding and activation of CO 2 , the formed InO x -Cu(111) interfaces had no problem adsorbing and dissociating the molecule at room temperature. Reaction of CO 2 with H 2 on InO x -Cu(111) yielded surface-bound H 3 CO, CO 2 δ− , CO 3 , and CH x species that are typical intermediates in the production of methanol and other oxygenates. The InO x -Cu(111) interface underwent dynamic chemical changes under reaction conditions, forming In-Cu alloys at low indium coverages (< 0.05 monolayer), while at higher indium coverages a mixture of an In-Cu and InO x was detected in XPS. These findings indicate that InO x /In-Cu interfaces can play a key role in processes aimed at the trapping and valorization of CO 2 .

36 MATERIALS SCIENCE↗
DOE OSTI2025

Enhanced methanol production from photothermal CO 2 reduction via multilevel interface design

Photothermal CO 2 hydrogenation is a promising route to produce methanol as a sustainable liquid solar fuel. However, most existing catalysts require a combination of solar irradiation and additional heat input to achieve a satisfactory reaction rate. For the few that can be driven solely by light, their reaction rates are one order of magnitude lower. We develop a photothermal catalyst with multilevel interfaces that achieves improved methanol production from photothermal CO 2 hydrogenation without external heat. The catalyst features a layered structure comprising Cu/ZnO/Al 2 O 3 (CZA) covered by oxidized carbon black (oCB), where the oCB/CZA interface promotes efficient heat generation and transfer, and the Cu/oxide interface contributes to high catalytic activity. Under a mild pressure of 8 bar, our oCB/CZA catalyst shows a methanol selectivity of 64.7% with a superior production rate of 4.91 mmol·g cza −1 ·h −1 , at least one order of magnitude higher than other photothermal catalysts solely driven by light. This work demonstrates a photothermal catalyst design strategy for liquid solar fuel production.

CO2 hydrogenation↗
DOE OSTI2020

Single-phase Ru 1- x-y Mn x Co y O 2 nanoparticles as highly effective oxygen reduction electrocatalysts in alkaline media with enhanced stability and fuel-tolerance

Here, a series of single-phase binary and ternary ruthenium and transition metal oxide nanoparticles supported on Vulcan - Ru 1-x MnxO2/C, Ru1-xCoxO 2 /C, Ru 1-x-y MnxCo y O 2 /C, Ru 1-x Fe x O 2 /C, Ru 1-x Ni x O 2 /C and Ru 1-x V x O 2 /C, as well as RuO 2 /C, MnO 2 /C, Co 3 O 4 /C and Mn 3-x Co x O 4 /C - were synthesized via a facile method and studied for their oxygen reduction reaction (ORR) activity in alkaline media. Single-phase Ru 1-x Mn x O 2 /C, Ru 1-x-y Mn x Co y O 2 /C and Ru 1-x Co x O 2 /C catalysts significantly boosted ORR kinetics in alkaline media. Moreover, they were H 2 and methanol tolerant, and exhibited long term stability due to their single-phase structure. Ru 0.85 Mn 0.15 O 2 /C stood out as the most active catalyst among them. A volcano relationship of the ORR activity of these binary and ternary metal oxide catalysts vs. the O adsorption energy was found, with the maximum activity observed for the Ru 1-x Mn x O 2 /C, Ru 1-x-y Mn x Co y O 2 /C and Ru 1-x Co x O 2 /C catalysts due to their optimal O binding energy. These materials have potential applications as highly active ORR catalysts in alkaline fuel cells and metal-air batteries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Selective Formation of Acetic Acid and Methanol by Direct Methane Oxidation Using Rhodium Single-Atom Catalysts

Atomically dispersed catalysts such as single-atom catalysts have been shown to be effective in selectively oxidizing methane, promising a direct synthetic route to value-added oxygenates such as acetic acid or methanol. However, an important challenge of this approach has been that the loading of active sites by single-atom catalysts is low, leading to a low overall yield of the products. We report an approach that can address this issue. It utilizes a metal–organic framework built with porphyrin as the linker, which provides high concentrations of binding sites to support atomically dispersed rhodium. It is shown that up to 5 wt% rhodium loading can be achieved with excellent dispersity. When used for acetic acid synthesis by methane oxidation, a new benchmark performance of 23.62 mmol·gcat –1 ·h –1 was measured. Furthermore, the catalyst exhibits a unique sensitivity to light, producing acetic acid (under illumination, up to 66.4% selectivity) or methanol (in the dark, up to 65.0% selectivity) under otherwise identical reaction conditions.

36 MATERIALS SCIENCE↗
DOE OSTI2020

A New Process for Carbon Dioxide Conversion to Fuel

In this project, TDA developed a new mixed metal oxide-based sorbent that converts CO 2 (captured from coal fired power plant) to CO, which can then be combined with renewable H 2 generated by water electrolysis to produce different liquid fuels. TDA’s absorbent-based CO 2 conversion process uses a redox process, which splits the reverse water gas shift reaction steps into two stages: CO 2 reduction to CO and H 2 oxidation to H 2 O and eliminates the equilibrium limitations. The CO produced in the two-stage reactor system can then be further reacted with renewable H 2 to produce methanol, naphtha, diesel, or gasoline. We worked with the Gas Technology Institute (GTI) and Advanced Power & Energy Program (APEP) of University of California, Irvine (UCI) to design and develop the liquid fuel synthesis process that is built around this new material. We demonstrated the techno-economic viability of the new sorbent based redox process to convert CO 2 into synthesis gas by: 1) demonstrating continuous carbon dioxide reduction in a prototype test system for over 500 hours while converting up to 0.4 kg CO 2 /day. With the successful completion of the R&D effort, the technology is now ready for a larger pilot-scale demonstration and the technology readiness has been raised from TRL 3 to TRL 5. In collaboration UCI, we also completed a high-fidelity process design and economic analysis. The required selling price (RSP) for methanol (Case 1 H2-MeOH) is $\$$3.06/gal, naphtha and diesel (Case 2 H2-FT) are $\$$6.21/gal and $\$$8.91/gal, and for gasoline (Case 3 H2-MTG) is $\$$6.96/gal on a 2011 dollar basis. To put these costs in perspective, the recent (June 2020) U.S. price for methanol made from natural gas is about $\$$1.19/gal according to Methanex, a major methanol producer in North America. The recent (June 2, 2020) California prices for gasoline and diesel with California’s strict specifications are $\$$3.35/gal and $\$$3.73/gal according to the U.S. Energy Information Agency. On the other hand, it should be noted that the gasoline and diesel produced by the designs of Case 2 and Case 3 would be both nitrogen and sulfur free. These RSPs are based on a cost of imported electricity of $\$$64/MWh based on the low-end current wind generated electricity cost (Genevieve and Ramsden, Wind Electrolysis: Hydrogen Cost Optimization, Technical Report, June 2011, NREL/TP-5600-50408). This cost is by far the largest component of the variable costs used in computing the RSPs. The cost of the imported electricity has to approach zero for the RSP to be competitive for methanol produced in Case 1 and naphtha and diesel produced in Case 2 while the cost of electricity has to be less than $\$$10/MWh for gasoline produced in Case 3.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2020

Critical Hydrogen Coverage Effect on the Hydrogenation of Ethylene Catalyzed by δ-MoC(001): An Ab Initio Thermodynamic and Kinetic Study

Highly selective oxidation of methane to methanol has long been challenging in catalysis. Here, we reveal key steps for the promotion by water when tuning the selectivity of a well-defined CeO 2 /Cu 2 O/Cu(111) catalyst from CO and CO 2 to methanol under a reaction environment with methane, oxygen, and water. Ambient-pressure x-ray photoelectron spectroscopy showed that water added to CH 4 and O 2 led to surface CH 3 O and accelerated methanol production. These results were consistent with density functional theory calculations and kinetic Monte Carlo simulations which showed that water preferentially dissociates over the active Ce ions at the CeO 2 -Cu 2 O/Cu(111) interface. The adsorbed OH blocked O-O bond cleavage that would dehydrogenate CH 3 O to CO and CO 2 , and it directly converted this species to methanol, while O 2 now reoxidized the reduced surface. Water adsorption also displaced the produced methanol into the gas phase.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Contra-Thermodynamic Positional Isomerization of Olefins

A light-driven method for the contra-thermodynamic positional isomerization of olefins is described. In this work, stepwise PCET activation of a more substituted and more thermodynamically stable olefin substrate is mediated by an excited-state oxidant and a Brønsted base to afford an allylic radical that is captured by a Cr(II) cocatalyst to furnish an allylchromium- (III) intermediate. In situ protodemetalation of this allylchromium complex by methanol is highly regioselective and affords an isomerized and less thermodynamically stable alkene product. The higher oxidation potential of the less substituted olefin isomer renders it inert to further oxidation by the excited-state oxidant, enabling it to accumulate in solution over the course of the reaction. A broad range of isopropylidene substrates are accommodated, including enol ethers, enamides, styrenes, 1,3-dienes, and tetrasubstituted alkyl olefins. Mechanistic investigations of the protodemetalation step are also presented.

14 SOLAR ENERGY↗
DOE OSTI2020

Insights into the methanol synthesis mechanism via CO 2 hydrogenation over Cu-ZnO-ZrO2 catalysts: Effects of surfactant/Cu-Zn-Zr molar ratio

In this study, we evaluated aspects of the CO 2 hydrogenation mechanism, correlating structure-activity relationships of Cu-ZnO-ZrO 2 catalysts prepared by one-pot surfactant-assisted co-precipitation with different surfactant ratios. Identifying the CO 2 hydrogenation pathway intermediates is key to controlling the reaction selectivity. Experimental evidence shows that the CO 2 is dissociating into CO* and O* onto the surface of the Cu-ZnO-ZrO 2 catalyst. The adsorption and dissociation of CO2 were evidenced by a combination of in situ ambient-pressure X-ray Photoelectron Spectroscopy (AP-XPS) and Fourier Transform Infrared Spectroscopy (FTIR) with a transmission cell. AP-XPS showed that the catalysts are composed of a Cu 2+ , Zr 3+ , and Zr 4+ mixture and two kinds of Zn 2+ species. After the H 2 reduction process, only Cu 2+ was reduced to Cu0. The Zn and Zr species were oxidized by the dissociated O* species. In situ transmission FTIR showed that CO was adsorbed onto the Cu+/0 sites. The catalyst with the higher surfactant molar ratio exhibited the highest CO 2 conversion close to the equilibrium conversion, as well as a good methanol formation rate.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Theoretical Perspective of Promoting Direct Methane-to-Methanol Conversion at Complex Metal Oxide–Metal Interfaces

Direct methane conversion to methanol has been considered as an effective and economic way to release greenhouse effects and current high demand on methanol in industry. However, the process has long been challenging due to lack of viable catalysts to compromise the activation of methane that typically occurs high temperatures and retaining of produced methanol that requires mild conditions. Here, this perspective demonstrates an effective strategy to promote direct methane to methanol conversion by engineering the active sites and chemical environments at complex metal oxide - copper oxide - copper interfaces. Such effort strongly depends on the extensive theoretical studies by combining density functional theory (DFT) calculations and kinetic Monte Carlo (KMC) simulations to provide in-depth understanding of reaction mechanism and active sites, which built the strong basis to enable the identification of design principles and advance the catalyst optimization for selective CH 4 -to-CH 3 OH conversion.

03 NATURAL GAS↗
DOE OSTI2024

The Surface Chemistry of Methanol on Pd(111) and H–Pd(111) Surfaces: C–O Bond Cleavage and the Effects of Metal Hydride Formation

Palladium catalysts are frequently employed in processes where methanol is an energy vector or carrier, being useful for the synthesis of methanol from mixtures of carbon dioxide and hydrogen (CO 2 /H 2 ) or its steam reforming on demand. Results of synchrotron-based ambient pressure X-ray photoelectron spectroscopy for the adsorption of methanol on a Pd(111) model catalyst show a rich surface chemistry and complex phenomena that strongly depend on pressure and temperature. At low pressures (< 10 -6 Torr) and temperatures (< 300 K), CO is the dominant decomposition product. Further, as the pressure increases, cleavage of C-H, O-H and C-O bonds is observed, and at elevated temperatures (400-600 K) the formation of CO and CH x /C fragments compete on the surface. Thus, existing reaction networks for methanol decomposition must be modified. Furthermore, surface and subsurface hydrogen (coming from PdH x ) play a significant role in the stability and removal of CH x and C species.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Method for direct conversion of carbon dioxide to dialkyl carbonates using ethylene oxide as feedstock

A method for co-production of high purity dimethyl carbonate and mono-ethylene glycol by applying a reactor, such as a membrane reactor and/or an adsorbent-catalytic reactor by capturing and reacting carbon dioxide with methanol and ethylene oxide. Carbon dioxide may be recovered from primary sources (utilities and industrial processes) by a membrane or solid adsorbent, and subsequently converted to an intermediate hydroxy-ethyl-methyl carbonate by reacting with ethylene oxide and methanol. For high-purity carbon dioxide (obtained by carbon capture technologies or from an ethanol fermentation process), the membrane reactor is replaced with a catalytic reactor for direct conversion of carbon dioxide to hydroxy-ethyl-methyl carbonate by reacting with ethylene oxide and methanol. The hydro-ethyl-methyl carbonate is further reacted with methanol for conversion to dimethyl carbonate. A combination of heterogeneous and homogeneous catalysts is implemented for an effective conversion of carbon dioxide. An integrated reactive distillation process using side reactors is used for facilitating catalytic reaction for production of high purity dimethyl carbonate.

Panchal, Chandrakant B.↗
DOE OSTI2022

Partial oxidation of methane to methanol on boron nitride at near critical acetonitrile

Abstract Direct catalytic conversion of methane to methanol with O 2 has been a fundamental challenge in unlocking abundant natural gas supplies. Metal-free methane conversion with 17% methanol yield based on the limiting reagent O 2 at 275 °C was achieved with near supercritical acetonitrile in the presence of boron nitride. Reaction temperature, catalyst loading, dwell time, methane–oxygen molar ratio, and solvent-oxygen molar ratios were identified as critical factors controlling methane activation and the methanol yield. Extension of the study to ethane (C2) showed moderate yields of methanol (3.6%) and ethanol (4.5%).

03 NATURAL GAS↗
DOE OSTI2020

Ni5Ga3 Catalysts for CO2 Reduction to Methanol: Exploring the Role of Ga Surface Oxidation/reductions on Catalytic Activity

Ad-Ni5Ga3/SiO2 catalyst, which is highly active and stable for thermal CO2 hydrogenation to methanol, was investigated to understand its surface dynamics during reaction conditions. The catalyst was prepared, tested and characterized using a multitude of techniques, including ex-situ XRD, TEM, H2-TPR, CO chemisorption and in-situ ETEM and APXPS. The formation of Ga2O3 upon air exposure was observed and the consequences on catalytic activity were investigated. Results revealed that upon air exposure Ga migrates from the subsurface region to the surface of the nanoparticles forming a Ga-oxide shell surrounding a metallic core. The oxide shell can be reduced completely at high temperatures and the temperature of the reduction activation treatment plays a crucial role on the catalytic activity. This air exposure-reduction procedure results in a redistribution of the Ga species in the surface/subsurface region, promoted by a higher Ga affinity for oxygen. XRD analysis of the post-reaction samples provide evidence for the partial transformation of a Ni5Ga3 intermetallic phase into a Ni-rich Ni3Ga phase. APXPS data indicate that the Ni-rich phase forms in the subsurface region. A Ga-rich phase exists on the surface, where the Ni/Ga ratio reaches 2/3 upon activation in hydrogen. At low reduction temperatures an amorphous Ga2O3 shell remains, indicating a promotion effect on methanol synthesis activity.

Ni-Ga, intermetallic, methanol synthesis, in-situ ↗