Search NASA⌕ Search

SEARCH · Search NASA

Results for “multiple crystals”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Data association multiple target tracking using a phase-mostly liquid crystal television

This paper presents a technique of using data association target tracking in a motion sequence via an adaptive joint transform correlator. The massive data in the field of view can be reduced to a few correlation peaks. The average velocity of a target during the tracking cycle is then determined from the location of the correlation peak. A data association algorithm is used for the analysis of these correlation signals, with which multiple targets can be tracked. A phase-mostly liquid-crystal TV is used in the hybrid joint transform correlation system, and simultaneous tracking of three targets is demonstrated.

Tam, Eddy C.↗
DOE OSTI2022

Custom-designed heat treatment simultaneously resolves multiple challenges facing 3D-printed single-crystal superalloys

Single-crystal Ni-based superalloys are currently the material of choice for turbine blade applications, especially with the emerging additive manufacturing (AM) that facilitates the manufacture/repair of these single crystals. This promising AM route, however, comes with a dilemma: in the fusion and heat affected zones after e-beam or laser induced melting, one needs a solutionizing annealing to relieve the residual stresses and homogenize the chemical/microstructure. The super-solvus solutionizing temperature is usually adopted from the protocol for the cast superalloys, which almost always causes recrystallization and stray grain growth, resulting in a polycrystalline microstructure and degrading the high-temperature mechanical performance. Here, in this paper, we demonstrate a custom-designed post-printing heat treatment to replace the conventional super-solvus one. The recovery and relatively low temperature diminish the driving force for recrystallization and the movement of stray grain boundaries, without suffocating the chemical/microstructural homogenization thanks to the narrow dendrite width and short element segregation distance. The optimal duration of the heat treatment is proposed to achieve atomic-diffusion mediated chemical homogenization while limiting γ'-particle coarsening in the interdendritic regions. Our strategy makes it practically feasible to resolve several bottleneck problems with one processing/treatment, removing a seemingly formidable obstacle to effective additive manufacturing of superalloy single crystal products.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Multimodal Characterization of Crystal Structure and Formation in Rubrene Thin Films Reveals Erasure of Orientational Discontinuities

Abstract Multimodal multiscale characterization provide opportunities to study organic semiconducting thin films with multiple length scales, across multiple platforms, to elucidate crystallization mechanisms of the various microstructures that impact functionality. With polarized scanning transmission X‐ray and 4D‐scanning transmission electron microscopy, hybrid crystalline structures in rubrene thin films in which large crystalline domains surround a common nucleus and transition to a spherulite morphology at larger radii is observed. These high‐resolution techniques reveal how azimuthal orientational discontinuities at smaller radii are erased as spherulite morphology takes hold. In situ crystallization in the films with optical microscopy is also captured, discovering the importance of considering the initial temperature increase of a film during thermal annealing over the crystallization timescale. This kinetic information of the radial crystallization rate and of corresponding film heating kinetics is used to estimate the temperature at which the larger crystalline regions transition into a spherulite. By combining the results obtained from the different characterization modes, it is learned that thermal conditions can sensitively affect the crystallization of rubrene and other organic thin films. The observations suggest opportunities for more complex temperature‐dependent processing to maximize hybrid structures’ functionality in organic thin films and demonstrate that multimodal studies deepen the understanding of structure‐function dynamics.

Tan, Jenna A.↗
DOE OSTI2022

Multiple ferroelectric nematic phases of a highly polar liquid crystal compound

Ferroelectric nematic liquid crystals represent not only fascinating, fundamental science, but they also hold promise for new technologies including high-density power storage or sub-millisecond switching information displays. In this work, we describe the synthesis and measurements of the physical properties of a new compound, 4-nitrophenyl 4-[(2,4-dimethoxylbenzoyl)oxy]-2-fluorobenzoate (RT11001). This material exhibits multiple, highly polar, ferroelectric nematic phases that have not been previously reported. Here we employ a wide range of physical characterisation methods including differential scanning calorimetry (DSC), mass density measurement, optical birefringence, polarising optical microscopy (POM), dielectric spectroscopy, electric current analysis, electro-optical switching, small-angle and wide-angle x-ray scattering measurements to show that RT11001 has multiple, distinct ferroelectric phases. We argue that the highest temperature phase is a polar nematic fluid with non-polar smectic clusters. Directly below appears to be a transition to another polar nematic phase containing polar positionally ordered clusters. Lastly, there are indications of an additional, polar biaxial liquid crystal phase at lower temperatures.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Hematite Crystallization from a Two-Line Ferrihydrite Suspension

Rational design and synthesis of materials, determination of environmental conditions at the time of mineral formation, and definition of mechanisms in biomineralizing systems all require an understanding of the effect of multiple factors on modulating crystallization pathways. In this study, we investigate the influence of temperature, oxalate additive, aging time, and addition of seed crystals on hematite (α-Fe 2 O 3 , Hm) crystallization from a two-line ferrihydrite (Fe 2 O 3 ·xH 2 O, Fh) suspension. We also investigate the effect of temperature on the aging of spindle-shaped Hm mesocrystals, which we synthesize through the addition of sodium oxalate. The results show that Hm mesocrystals form in a temperature window of 45 °C-130 °C. Temperatures ≥ 140 °C favor formation of rhombohedral Hm, suggesting classical monomer-by-monomer growth dominates, whereas crystallization by particle attachment (CPA) is dominant between 45 and 90 °C, while the two processes compete in the intermediate temperature range. Aging of mesocrystals in the original solution at 90 °C or 180 °C leads to a slow morphological evolution towards rhombohedral crystals due to Ostwald ripening. Then, by utilizing rhombohedral Hm and rod-shaped goethite as substrates on which to assemble the mesocrystals, we demonstrate formation of complex heterogeneous structures.

36 MATERIALS SCIENCE↗
NASA NTRS1991

Corona-producing cirrus cloud properties derived from polarization lidar and photographic analyses

Polarization lidar data are used to demonstrate that clouds composed of hexagonal ice crystals can generate multiple-ringed colored coronas. Although relatively uncommon in the mid-latitude cirrus sample, the coronas are associated with unusual cloud conditions that appear to be effective in generating the displays. Invariably, the cirrus cloud tops are located at or slightly above elevated tropopauses at temperatures between -60 and -70 C. The cloud top region also generates relatively strong laser backscattering and unusually high 0.5-0.7 linear depolarization ratios. Color photograph analysis of corona ring angles indicates crystals with mean diameters of from 12 to 30 microns. The cirrus cloud types were mainly subvisual to thin cirrostratus, but also included fibrous cirrus. Estimated cloud optical thicknesses at the 0.694-micron laser wavelength ranged from about 0.001 to 0.2, where the upper limit reflects the effects of multiple scattering and/or unfavorable changes in particle characteristics in deep cirrus clouds.

Sassen, Kenneth↗
DOE OSTI2022

Growth mechanisms of large, faceted crystals grown from solutions

Here, the paper describes optical techniques and methods used to study growth mechanisms and phenomena occurring on multiple faces of real bulk crystals grown from aqueous and organic solutions. Using examples of ionic KDP and molecular trans-stilbene crystals, it shows how in-situ and ex-situ surface observations can be applied to identify growth structures characteristic for the dislocation, two-dimensional (2D), and 3D cluster deposition mechanisms. Results are analyzed and applied to understanding of defects origins and methods for their elimination in practical growth of large, high optical quality crystals.

2D growth mechanism↗
NASA NTRS1987

Use of hydrophilic polymer coatings for control of electroosmosis and protein adsorption

The purpose of this project was to examine the utility of polyethylene glycol (PEG) and dextran coatings for control of electroosmosis and protein adsorption; electroosmosis is an important, deleterious process affecting electrophoretic separations, and protein adsorption is a factor which needs to be controlled during protein crystal growth to avoid multiple nucleation sites. Performance of the project required use of X-ray photoelectron spectroscopy to refine previously developed synthetic methods. The results of this spectroscopic examination are reported. Measurements of electroosmotic mobility of charged particles in appropriately coated capillaries reveals that a new, one-step route to coating capillaries gives a surface in which electroosmosis is dramatically reduced. Similarly, both PEG and dextran coatings were shown by protein adsorption measurements to be highly effective at reducing protein adsorption on solid surfaces. These results should have impact on future low-g electrophoretic and protein crystal growth experiments.

Harris, J. Milton↗
NASA NTRS1999

Submillimeter-Wave Cloud Ice Radiometry

Submillimeter-wave cloud ice radiometry is a new and innovative technique for characterizing cirrus ice clouds. Cirrus clouds affect Earth's climate and hydrological cycle by reflecting incoming solar energy, trapping outgoing IR radiation, sublimating into vapor, and influencing atmospheric circulation. Since uncertainties in the global distribution of cloud ice restrict the accuracy of both climate and weather models, successful development of this technique could provide a valuable tool for investigating how clouds affect climate and weather. Cloud ice radiometry could fill an important gap in the observational capabilities of existing and planned Earth-observing systems. Using submillimeter-wave radiometry to retrieve properties of ice clouds can be understood with a simple model. There are a number of submillimeter-wavelength spectral regions where the upper troposphere is transparent. At lower tropospheric altitudes water vapor emits a relatively uniform flux of thermal radiation. When cirrus clouds are present, they scatter a portion of the upwelling flux of submillimeter-wavelength radiation back towards the Earth as shown in the diagram, thus reducing the upward flux o f energy. Hence, the power received by a down-looking radiometer decreases when a cirrus cloud passes through the field of view causing the cirrus cloud to appear radiatively cool against the warm lower atmospheric thermal emissions. The reduction in upwelling thermal flux is a function of both the total cloud ice content and mean crystal size. Radiometric measurements made at multiple widely spaced frequencies permit flux variations caused by changes in crystal size to be distinguished from changes in ice content, and polarized measurements can be used to constrain mean crystal shape. The goal of the cloud ice radiometry program is to further develop and validate this technique of characterizing cirrus. A multi-frequency radiometer is being designed to support airborne science and spacecraft validation missions. This program has already extended the initial millimeter-wave modeling studies to submillimeter-wavelengths and has improved the realism of the cloud scattering models. Additionally a proof-of-concept airborne submillimeter-wave radiometer was constructed and fielded. It measured a radiometric signal from cirrus confirming the basic technical feasibility of this technique. This program is a cooperative effort of the University of Colorado, Colorado State University, Swales Aerospace, and Jet Propulsion Laboratory. Additional information is contained in the original.

Walter, Steven J.↗
DOE OSTI2022

Between Harmonic Crystal and Glass: Solids with Dimpled Potential-Energy Surfaces Having Multiple Local Energy Minima

Solids with dimpled potential-energy surfaces are ubiquitous in nature and, typically, exhibit structural (elastic or phonon) instabilities. Dimpled potentials are not harmonic; thus, the conventional quasiharmonic approximation at finite temperatures fails to describe anharmonic vibrations in such solids. At sufficiently high temperatures, their crystal structure is stabilized by entropy; in this phase, a diffraction pattern of a periodic crystal is combined with vibrational properties of a phonon glass. As temperature is lowered, the solid undergoes a symmetry-breaking transition and transforms into a lower-symmetry phase with lower lattice entropy. Here, we identify specific features in the potential-energy surface that lead to such polymorphic behavior; we establish reliable estimates for the relative energies and temperatures associated with the anharmonic vibrations and the solid–solid symmetry-breaking phase transitions. We show that computational phonon methods can be applied to address anharmonic vibrations in a polymorphic solid at fixed temperature. To illustrate the ubiquity of this class of materials, we present a range of examples (elemental metals, a shape-memory alloy, and a layered charge-density-wave system); we show that our theoretical predictions compare well with known experimental data.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Cascade of vestigial orders in two-component superconductors: Nematic, ferromagnetic, s -wave charge- 4 e , and d -wave charge- 4 e states

Electronically ordered states that break multiple symmetries can melt in multiple stages, similarly to liquid crystals. In a partially melted phase, known as vestigial phase, a bilinear made out of combinations of the multiple components of the primary order parameter condenses. Multicomponent superconductors are thus natural candidates for vestigial order since they break both the U⁡(1)-gauge and also time-reversal or lattice symmetries. Here, we use group theory to classify all possible real-valued and complex-valued bilinears of a generic two-component superconductor on a tetragonal or hexagonal lattice. While the more widely investigated real-valued bilinears correspond to vestigial nematic or ferromagnetic order, the little explored complex-valued bilinears correspond to a vestigial charge-4e condensate, which itself can have an underlying s-wave, d x 2 –y 2 -wave, or d xy -wave symmetry. To properly describe the fluctuating regime of the superconducting Ginzburg-Landau action and thus access these competing vestigial phases, we employ both a large-N and a variational method. We show that while vestigial order can be understood as a weak-coupling effect in the large-N approach, it is akin to a moderate-coupling effect in the variational method. Despite these distinctions, both methods yield similar results in wide regions of the parameter space spanned by the quartic Landau coefficients. Specifically, we find that the nematic and ferromagnetic phases are the leading vestigial instabilities, whereas the various types of charge-4⁢e order are attractive albeit subleading vestigial channels. The only exception is for the hexagonal case, in which the nematic and s-wave charge-4e vestigial states are degenerate. Finally, we discuss the limitations of our approach, as well as the implications of our results for the realization of exotic charge-4⁢e states in material candidates.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

High Thermoelectric Performance through Crystal Symmetry Enhancement in Triply Doped Diamondoid Compound Cu 2 SnSe 3

The presence of high crystallographic symmetry and nanoscale defects are favorable for thermoelectrics. With proper electronic structures, a highly symmetric crystal tends to possess multiple carrier channels and promote electrical conductivity without sacrificing Seebeck coefficient. In addition, nanoscale defects can effectively scatter acoustic phonons to suppress thermal conductivity. Here, we report that the triple doping of Cu 2 SnSe 3 leads to a high ZT value of 1.6 at 823 K for Cu 1.85 Ag 0.15 (Sn 0.88 Ga 0.1 Na 0.02 )Se 3 , and a decent average ZT (ZT ave ) value of 0.7 is also achieved for Cu 1.85 Ag 0.15 (Sn 0.93 Mg 0.06 Na 0.01 )Se 3 from 475 to 823 K. Our study reveals: (1) Ag doping on Cu sites generates numerous point defects and greatly decreases lattice thermal conductivity. (2) Doping Mg or Ga converts the monoclinic Cu 2 SnSe 3 into a cubic structure. This symmetry enhancing leads to increase in the effective mass from 0.8 m e to 2.6 m e (m e , free electron mass) and the power factor from 4.3 μW/cm –1 K –2 for Cu 2 SnSe 3 to 11.6 μW/cm –1 K –2 . (3) Na doping creates dense dislocation arrays and nanoprecipitates, which strengthens the phonon scattering. (4) Pair distribution function analysis shows localized symmetry breakdwon in the cubic Cu 1.85 Ag 0.15 (Sn 0.88 Ga 0.1 Na 0.02 )Se 3 . Furthermore, the present work provides a standpoint to design promising thermoelectric materials by synergistically manipulating crystal symmetry and nanoscale defects.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Raman and Terahertz Spectroscopy of Low-Frequency Chiral Phonons in Amino Acids

Chiral phonons are mirror-symmetric vibrations with nonzero angular momenta that correspond to twisting and rotational motions of multiple atoms. In chiral crystals, these include low-energy terahertz (THz)-range vibrations of the molecular segments involving dozens of atoms with energies sensitive to molecular chirality. Here, we present spectral signatures of chiral phonons in circularly polarized Raman optical activity (ROA) spectra from enantiomers of amino acid crystals. Along with complementary THz circular dichroism (TCD) measurements, our ROA data reveal several vibrational bands in enantiomers of valine, alanine, tyrosine, and proline between 30 and 150 cm –1 (∼1–4.5 THz) that exhibit opposite intensities. Density functional theory calculations confirm their assignment to twisting and shearing molecular motions. The simultaneous registration of chiral phonon modes by ROA and TCD demonstrates the necessity of these complementary techniques to identify complex mirror-asymmetric vibrational modes and offers new insights into their interactions with circularly polarized light.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Thickness-Dependent Cross-Plane Thermal Conductivity Measurements of Exfoliated Hexagonal Boron Nitride

Submicrometer-thick layers of hexagonal boron nitride (hBN) exhibit high in-plane thermal conductivity and useful optical properties, and serve as dielectric encapsulation layers with low electrostatic inhomogeneity for graphene devices. Despite the promising applications of hBN as a heat spreader, the thickness dependence of its cross-plane thermal conductivity is not known, and the cross-plane phonon mean free paths (MFPs) have not been measured. We measure the cross-plane thermal conductivity of hBN flakes exfoliated from bulk crystals. We find that submicrometer thick flakes exhibit thermal conductivities up to 8.1 ± 0.5 W m –1 K –1 at 295 K, which exceeds previously reported bulk values by more than 60%. Surprisingly, the average phonon mean free path is found to be several hundred nanometers at room temperature, a factor of 5 larger than previous predictions. When planar twist interfaces are introduced into the crystal by mechanically stacking multiple thin flakes, the cross-plane thermal conductivity of the stack is found to be a factor of 7 below that of individual flakes with similar total thickness, thus providing strong evidence that phonon scattering at twist boundaries limits the maximum phonon MFPs. These results have important implications for hBN integration in nanoelectronics and improve our understanding of thermal transport in twodimensional materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

A charge-density-based general cation insertion algorithm for generating new Li-ion cathode materials

Future lithium (Li) energy storage technologies, in particular solid-state configurations with a Li metal anode, opens up the possibility of using cathode materials that do not necessarily contain Li in its as-made state. To accelerate the discovery and design of such materials, we develop a general, chemically, and structurally agnostic methodology for identifying the optimal Li sites in any crystalline material. For a given crystal structure, we attempt multiple Li insertions at symmetrically in-equivalent positions by analyzing the electronic charge density obtained from first-principles density functional theory. In this report, we demonstrate the effectiveness of this procedure in successfully identifying the positions of the Li ion in well-known cathode materials using only the empty host (charged) material as guidance. Furthermore, applying the algorithm to over 2000 candidate cathode empty host materials we obtain statistics of Li site preferences to guide future developments of novel Li-ion cathode materials, particularly for solid-state applications.

25 ENERGY STORAGE↗
DOE OSTI2021

HVEM structures and mutants reveal distinct functions of binding to LIGHT and BTLA/CD160

HVEM is a TNF (tumor necrosis factor) receptor contributing to a broad range of immune functions involving diverse cell types. It interacts with a TNF ligand, LIGHT, and immunoglobulin (Ig) superfamily members BTLA and CD160. Assessing the functional impact of HVEM binding to specific ligands in different settings has been complicated by the multiple interactions of HVEM and HVEM binding partners. To dissect the molecular basis for multiple functions, we determined crystal structures that reveal the distinct HVEM surfaces that engage LIGHT or BTLA/CD160, including the human HVEM–LIGHT–CD160 ternary complex, with HVEM interacting simultaneously with both binding partners. Based on these structures, we generated mouse HVEM mutants that selectively recognized either the TNF or Ig ligands in vitro. Knockin mice expressing these muteins maintain expression of all the proteins in the HVEM network, yet they demonstrate selective functions for LIGHT in the clearance of bacteria in the intestine and for the Ig ligands in the amelioration of liver inflammation.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2026

Laning transitions in pattern-forming driven binary systems with competing interactions

A binary system of particles that move in opposite directions under an applied field can exhibit disordered states as well as laned states where the particles organize into oppositely moving high-mobility lanes to reduce collisions. Previous studies of laning transitions generally focused on particles with purely repulsive interactions. Here, in this study, we examine laning transitions for oppositely moving pattern-forming systems of particles with competing attractive and repulsive interactions, which in equilibrium form crystal, stripe, and bubble states. In addition to multiple types of laned states, we find jammed crystals, stripes, and bubbles, and generally observe a much richer variety of phases compared to the purely repulsive system. In the stripe-forming regime, the system can dynamically reorder into oppositely moving stripes that are aligned in the direction of the drive. The bubble phase can produce strongly polarized jammed states of elongated bubbles where particles in the individual bubbles segregate to opposite sides of the bubbles. We also find disordered states, segregated laned bubble states where the bubbles pass each other in lanes, and segregated bubbles that move through one another. In the compact bubble regime, we obtain a plastic bubble state in which the oppositely driven particles remain trapped in the bubbles but the bubbles move past each other at a slow velocity due to a net imbalance in the bubble population. At higher drives, individual particles begin to jump from bubble to bubble. We show that the different phases and the transitions between them produce signatures in the velocity-force and differential mobility curves. We demonstrate that the force for escaping from the jammed state is nonmonotonic, with stripes exhibiting the lowest unjamming force.

36 MATERIALS SCIENCE↗