Search NASA⌕ Search

SEARCH · Search NASA

Results for “nanostructured interfaces”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Development and Characterization of Electrodes for Surface-Specific Attenuated Total Reflection Two-Dimensional Infrared Spectroelectrochemistry

Electrochemical interfaces still have remaining mysteries surrounding the interfacial region of the electrical double layer, despite being prevalent throughout the energy and water remediation industries. The electrical double layer is where many important dynamic processes such as catalysis and electron transfer occur. The goal of this work is to study the electrical double layer with two-dimensional infrared (2D IR) spectroscopy to experimentally access the details of the structural dynamics of this complex environment. However, there are several experimental challenges to applying 2D IR spectroscopy to this application, such as assuring the surface specificity of the spectrum, optimizing the signal strength while minimizing spectral distortions from dispersion and Fano line shapes, and selecting electrode materials that are both sufficiently IR compatible and conductive. Here we will discuss various considerations when designing 2D IR experiments of electrode interfaces utilizing several substrates and experimental configurations and demonstrate a robust method for 2D IR experiments of electrode interfaces under applied potential that combines nonconducting Si ATR wafers with conductive ITO and thin nanostructured films of plasmonically active Au functionalized with 3-mercapto-2-butanone (MCB). We show that layered electrodes on thin Si ATR wafers with MCB are sensitive to applied potential and that the distortions in the linear and 2D IR spectra are heavily dependent on the morphology of the Au surface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Roll-To-Roll Atomic Layer Deposition of Titania Nanocoating on Thermally Stabilizing Lithium Nickel Cobalt Manganese Oxide Cathodes for Lithium Ion Batteries

Conformal coating of ceramic layers (nm-thick) on Ni-rich layered cathode materials is an effective strategy for improving high-temperature longevity of Li-ion batteries (LIBs). In this work, we develop a roll-to-roll atomic layer deposition (R2R ALD) apparatus for growing uniform nanolayers of TiO 2 . We explore the effect of ALD parameters (temperature: 120–180 °C and line speed: 2–40 mm s –1 ) on the TiO 2 surface coating and subsequently investigate the electrochemical performance of the as-prepared cathodes. The capacity retention of TiO 2 -coated porous electrodes is substantially improved compared to that of the pristine cathode material for high-temperature cycling. Electrochemical impedance spectroscopy confirms that the ALD-TiO 2 coating suppresses the undesired side reactions initiated at the electrode/electrolyte interface, reduces charge transfer resistance, and ultimately facilitates the Li + transport through the composite cathode nanostructure. The robust design of the ALD-TiO 2 cathode material enables high-temperature operation (>55 °C) with enhanced specific capacity, superior rate capability, excellent cyclability, and ultra-high coulombic efficiency within a wide potential window (3.0–4.35 V). Furthermore, the R2R ALD technique developed in this work paves the way for large-scale fabrication of ceramic-coated cathode sheets with a production rate reaching 2.4 m min –1 for a continuous coating operation.

25 ENERGY STORAGE↗
DOE OSTI2023

Accelerating Manufacturing of Powder-Processed Strong, Lightweight and Thermally Stable Bulk Nanocrystalline Al Alloys via Engineered Interface States

The overarching goal of this program is to develop an integrated materials by design framework enabling a simple, scalable, and efficient manufacturing route for thermally stable nanocrystalline Al-based alloys with high specific strength over a range of service temperatures. The central scientific principle underpinning this program is the elucidation, and ultimately implementation in novel alloy design, of unique interfacial structures and chemistries driven by segregation in multi-component systems that give rise to unprecedented processability and properties. This program targeted nanocrystalline Al-based ternary alloys produced by mechanical alloying of powders followed by compaction and sintering with hot pressing, which are inherently scalable and inexpensive manufacturing routes, but when applied to nanocrystalline alloys are usually plagued by low density and/or poor retention of the intended nanostructures during processing. This program successfully demonstrated manufacturing of a bulk (>1 cm 3 ) nanocrystalline Al-based alloy with a combination of thermal stability, high temperature strength retention, and specific strength that exceeds the current-state-of-the-art of Al alloys. It is anticipated that the greatest technological impact will occur by demonstration of rapid and scalable manufacturing of bulk nanocrystalline Al alloys with exceptional thermal stability and mechanical performance, thus enabling increased energy efficiency in high performance power generation systems via: (i) replacement of existing components with lightweight Al-based alloys and (ii) increasing operating temperatures with property retention. The program focused on the development of a simple and efficient manufacturing route for thermally stable nanocrystalline Al-based alloys with high specific strength over a range of service temperatures. The program is expected to have direct impact on scalable and economic manufacturing of bulk nanocrystalline alloys. This program profited from the recent discovery by the project team of segregation-driven amorphous intergranular films in nanocrystalline metallic alloys that can be kinetically frozen-in at sub-solidus temperatures. These interfacial states (also known as amorphous complexions) comprise a large fraction of the total material in nanocrystalline alloys and are responsible for two beneficial characteristics that anchor the proposed work: (1) activated sintering leading to high density and (2) retained nanostructures leading to high strengths that approach a substantial fraction of the theoretical limit. More specifically, these engineered interfaces led to a three-fold benefit: (i) high-throughput materials processing with low energy budget and cost, (ii) exceptional thermal stability, and (iii) high specific strength at both room temperature and intermediate temperatures experienced during service.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2024

Superhydrophobic Array Devices for the Enhanced Formation of 3D Cancer Models

During the metastatic cascade, cancer cells travel through the bloodstream as circulating tumor cells (CTCs) to a secondary site. Clustered CTCs have greater shear stress and treatment resistance, yet their biology remains poorly understood. We therefore engineered a tunable superhydrophobic array device (SHArD). The SHArD-C was applied to culture a clinically relevant model of CTC clusters. Using our device, we cultured a model of cancer cell aggregates of various sizes with immortalized cancer cell lines. These exhibited higher E-cadherin expression and are significantly more capable of surviving high fluid shear stress-related forces compared to single cells and model clusters grown using the control method, helping to explain why clustering may provide a metastatic advantage. Additionally, the SHArD-S, when compared with the AggreWell 800 method, provides a more consistent spheroid-forming device culturing reproducible sizes of spheroids for multiple cancer cell lines. Overall, we designed, fabricated, and validated an easily tunable engineered device which grows physiologically relevant three-dimensional (3D) cancer models containing tens to thousands of cells.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2003

Alloy Design Workbench-Surface Modeling Package Developed

NASA Glenn Research Center's Computational Materials Group has integrated a graphical user interface with in-house-developed surface modeling capabilities, with the goal of using computationally efficient atomistic simulations to aid the development of advanced aerospace materials, through the modeling of alloy surfaces, surface alloys, and segregation. The software is also ideal for modeling nanomaterials, since surface and interfacial effects can dominate material behavior and properties at this level. Through the combination of an accurate atomistic surface modeling methodology and an efficient computational engine, it is now possible to directly model these types of surface phenomenon and metallic nanostructures without a supercomputer. Fulfilling a High Operating Temperature Propulsion Components (HOTPC) project level-I milestone, a graphical user interface was created for a suite of quantum approximate atomistic materials modeling Fortran programs developed at Glenn. The resulting "Alloy Design Workbench-Surface Modeling Package" (ADW-SMP) is the combination of proven quantum approximate Bozzolo-Ferrante-Smith (BFS) algorithms (refs. 1 and 2) with a productivity-enhancing graphical front end. Written in the portable, platform independent Java programming language, the graphical user interface calls on extensively tested Fortran programs running in the background for the detailed computational tasks. Designed to run on desktop computers, the package has been deployed on PC, Mac, and SGI computer systems. The graphical user interface integrates two modes of computational materials exploration. One mode uses Monte Carlo simulations to determine lowest energy equilibrium configurations. The second approach is an interactive "what if" comparison of atomic configuration energies, designed to provide real-time insight into the underlying drivers of alloying processes.

Abel, Phillip B.↗
DOE OSTI2026

Pattern-enhanced Resonant Soft X-ray Scattering for Operando monitoring of electrochemical solid-liquid interfaces

Unveiling interfaces at sub-nanometer scales is essential for advancing the understanding of complex chemical transformations. However, characterizing solid-liquid interfaces with high dimensional sensitivity and temporal resolution remains challenging, due to their dynamic nature and inaccessibility by conventional probes. Here we present an approach, Pattern-enhanced Resonant Soft X-ray Scattering, to overcome the challenges. Rooted in a “sample-as-optics” philosophy, this technique utilizes precisely engineered line-grating nanopatterns to modulate near-field X-ray illumination, coherently enhancing scattering signals from the line-gratings. We implement the method using Ni line-grating nanopatterns in electrochemical water oxidation. The periodic nanostructures serve as diffractive optical elements to reveal the Ni oxidation gradients and structural dynamics at the electrode-electrolyte interfaces. Finite-element simulations corroborate the observed trends by modeling variations in compositions and structures during electrocatalysis. Through integrating advanced sample design with coherent wave nature of soft X-rays, our approach opens accessible pathways to operando exploring chemical evolution and sub-nanometer dimensional variations simultaneously in electrochemical systems. This non-destructive method is efficient and element-specific, making it valuable for probing chemical and dimensional dynamics with appropriate modeling.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Modifying Interface Solvation and Oxygen Reduction Electrocatalysis with Hydrophobic Species

Ionic liquid interlayers improve the oxygen reduction reaction (ORR) kinetics on bulk and nanostructured catalysts for both Pt and alloyed-Pt materials. Despite the demonstrated performance enhancement at the half-cell and membrane electrode assembly level, the mechanism of the improvement is not fully understood. In this work, we combine single-crystal experiments with microkinetic modeling to uncover the origin of the ORR kinetic improvement on Pt(111) in the presence of ionic liquids and hydrophobic cations. With the incorporation of a modified Frumkin isotherm, our model accurately simulates the disorder–order transition observed in hydroxyl and bisulfate adsorption on Pt(111) under acidic conditions. Voltametric analysis shows that ionic liquids impact solvation to break so-called scaling relations between the adsorption strength of OH ad and O ad , but these effects have little impact on ORR activity. Instead, destabilized OH ad reduces the overall hydroxyl (spectator) coverage, resulting in higher availability of active sites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Structural Properties of Nanometer‐Sized Gold Nanoparticles on a Silicon Substrate

Properties of gold nanoparticles (Au NPs) supported on Si substrates, which have been the focus of recent attention, depend sensitively on the size, structure, and coordination of Au NPs as well as on the processes of interdiffusion and chemical bonding at the Au–Si interface. There is a great need, therefore, for developing structural techniques capable of imaging such nanosystems in atomic detail. Here, it is discussed how the atomic structure of nanometer‐sized Au NPs deposited on a silicon surface can be determined by using high‐energy X‐ray diffraction measurements in combination with an analysis based on atomic‐pair‐distribution functions and advanced reverse Monte Carlo methods. This approach delivers simple and incisive pictures of the structure of Au clusters on Si and reveals direct structural evidence for the emergence of a Au‐silicide interface following room temperature deposition of Au NPs on Si. This study will contribute to designing Au/Si nanostructures with desirable properties.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

MgO Nanostructures on Au(111) as Catalysts for Low-Temperature Methane Activation and C-C Coupling

The selective conversion of methane (CH4) under mild conditions remains challenging due to strong C-H bonds and catalyst coking. We systematically investigated sub-monolayer MgO nanostructures on Au(111), where two-dimensional (2D) MgO islands with stable Mg-O-Au interfaces catalyze low-temperature CH4 activation and C-C coupling. Upon CH4 exposure at 300 K, surface-bound CHx and C2Hx intermediates formed and persisted post-evacuation, indicating robust CHx-O-Mg linkages. Temperature-programmed studies revealed that C-H activation and C-C coupling intensify with heat: the CHx signal grew continuously while the C2Hx signal reached a plateau at 400-500 K. O 1s and Mg 2p attenuation confirmed adsorption of the hydrocarbons on MgO. Catalytic tests at 500 K yielded C2H6 (70%) and C2H4 (30%) without coking, underscoring MgO's role as an active catalyst. These results offer new design principles for developing coke-resistant and low-temperature methane upgrading catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Support Effect and Surface Reconstruction in In 2 O 3 / m- ZrO 2 Catalyzed CO 2 Hydrogenation

Here, we investigate the chemical and structural dynamics at the interface of In 2 O 3 /m-ZrO 2 and their consequences on the CO 2 hydrogenation reaction (CO 2 HR) under reaction conditions. While acting to enrich CO 2 , monoclinic zirconia (m-ZrO 2 ) was also found to serve as a chemical and structural modifier of In 2 O 3 that directly governs the outcome of the CO 2 HR. These modifying effects include the following: (1) Under reaction conditions (above 623 K), partially reduced In 2 O 3 , i.e., InO x (0 < x < 1.5), was found to migrate in and out of the subsurface of m-ZrO 2 in a semireversible manner, where m-ZrO 2 accommodates and stabilizes InO x by serving as a reservoir. The decreased concentration of surface InO x under elevated temperatures coincides with significantly decreased selectivity toward methanol and a sharp increase of the reverse water–gas shift reaction. The reconstruction-induced variation of InO x concentration appears to be one of the most important factors contributing to the altered catalytic performance of CO 2 HR at different reaction conditions. (2) The strong interactions and reactions between m-ZrO 2 and In 2 O 3 result in the activation of a pool of In–O bonds at the In 2 O 3 /m-ZrO 2 interface to form oxygen vacancies. On the other hand, the high dispersity of In 2 O 3 nanostructures onto m-ZrO 2 prevents their over-reduction under catalytically relevant conditions (up to 673 K), when bare In 2 O 3 is unavoidably reduced into the metallic phase (In 0 ). The relationship between the extent of reduction of In 2 O 3 and catalytic performance (CO 2 conversion, CH 3 OH selectivity, or yield of CH 3 OH) suggests the presence of an optimum coverage of surface InO x and oxygen vacancies under reaction conditions. The conventional model that links catalytic performance solely to the coverage of oxygen vacancies appears invalid in the present case. In situ analysis also allows the observation of surface reaction intermediates and their interconversions, including the reduction of CO 3 * into formate, a precursor for the formation of methanol and CO. The combinative ex situ and in situ study sheds light on the reaction mechanism of the CO 2 HR on In 2 O 3 /m-ZrO 2 -based catalysts. Our findings on the large-scale surface reconstructions, support effect, and the reaction mechanism of In 2 O 3 /m-ZrO 2 for CO 2 HR may apply to other related metal oxide catalyzed CO 2 reduction reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Interface-Driven Chiral Magnetism in Ultrathin Metallic Ferromagnets: Towards Skyrmion Spintronics

Magnetic skyrmions are localized chiral magnetic textures in the form of nanoscale vortices or bubbles that are topologically protected from being ‘unwound’. Their topological nature gives rise to rich behaviors including ordered lattice formation, emergent electrodynamics and robust current-driven displacement at remarkably low current densities. However, magnetic skyrmions have so far been restricted to just a few materials and observed only at low temperatures, limiting the experimental accessibility and technological application of these unique topological objects. This project aimed to realize magnetic skyrmions at room temperature in a new class of engineered chiral ferromagnets that exploit broken mirror symmetry at interfaces to generate helical magnetic order. Ultrathin magnetic heterostructures were engineered and patterned into laterally-confined nanostructures in which skyrmions were stabilized, manipulated, and detected for the first time under ambient conditions. Static and dynamic properties were examined using advanced x-ray imaging to provide a fundamental understanding of topological magnetic phases. The interactions between magnetic skyrmions and electron charge and spin currents were studied to identify fundamental new physics and enable device applications. These experimental studies, supported by detailed modeling, will help launch a new subfield of skyrmion-based spintronics in which individual skyrmions can be used to encode, store, and transport information in high-performance, low power memory and logic devices.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Closing the Gap Between Modeling and Experiments in the Self-assembly of Biomolecules at Interfaces and in Solution

Molecular self-assembly is a powerful tool in materials design, wherein non-covalent interactions like electrostatic, hydrophobic, hydrogen bonding, and van der Waals can be exploited to produce supramolecular nanostructures that are functional and highly tunable. Biomolecules are attractive building blocks, as they are biocompatible, biodegradable and adopt a wide array of higher order structures. Moreover, naturally occurring protein systems display a manifold of structures and interactions that can be replicated in synthetic biomolecules. In this perspective, we highlight advances in multiscale simulation techniques across broad spatiotemporal scales that can aid in characterizing self-assembly of hybrid and hierarchical bionanomaterial systems, with an emphasis on physics-based simulation approaches currently employed to study biomolecules at mineral interfaces. The power of these approaches is highlighted across a few recent areas where molecular simulations have advanced our understanding of self-assembly spanning peptides to protein self-assembly. Looking forward, we discuss how in the near future emerging methods in statistical and machine learning will advance this research field in all areas from expanding the capabilities of physics-based simulation methods to enabling new analyses of high throughput experiments. These advances will pave the way for understanding the molecular recognition patterns in systems that are dictated by self-assembly - biomineralizing peptides, hierarchical peptoids, and large protein assemblies, and will aid in the development of a new synthesis science for achieving precise molecular control in materials design

Sampath, Janani↗
DOE OSTI2021

Defect-driven selective metal oxidation at atomic scale

Nanoscale materials modified by crystal defects exhibit significantly different behaviours upon chemical reactions such as oxidation, catalysis, lithiation and epitaxial growth. However, unveiling the exact defect-controlled reaction dynamics (e.g. oxidation) at atomic scale remains a challenge for applications. Here, using in situ high-resolution transmission electron microscopy and first-principles calculations, we reveal the dynamics of a general site-selective oxidation behaviour in nanotwinned silver and palladium driven by individual stacking-faults and twin boundaries. The coherent planar defects crossing the surface exhibit the highest oxygen binding energies, leading to preferential nucleation of oxides at these intersections. Planar-fault mediated diffusion of oxygen atoms is shown to catalyse subsequent layer-by-layer inward oxide growth via atomic steps migrating on the oxide-metal interface. These findings provide an atomistic visualization of the complex reaction dynamics controlled by planar defects in metallic nanostructures, which could enable the modification of physiochemical performances in nanomaterials through defect engineering.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

AENET–LAMMPS and AENET–TINKER : Interfaces for accurate and efficient molecular dynamics simulations with machine learning potentials

Machine-learning potentials (MLPs) trained on data from quantum-mechanics based first-principles methods can approach the accuracy of the reference method at a fraction of the computational cost. To facilitate efficient MLP-based molecular dynamics and Monte Carlo simulations, an integration of the MLPs with sampling software is needed. Here, we develop two interfaces that link the atomic energy network (ænet) MLP package with the popular sampling packages TINKER and LAMMPS. The three packages, ænet, TINKER, and LAMMPS, are free and open-source software that enable, in combination, accurate simulations of large and complex systems with low computational cost that scales linearly with the number of atoms. Scaling tests show that the parallel efficiency of the ænet–TINKER interface is nearly optimal but is limited to shared-memory systems. The ænet–LAMMPS interface achieves excellent parallel efficiency on highly parallel distributed memory systems and benefits from the highly optimized neighbor list implemented in LAMMPS. We demonstrate the utility of the two MLP interfaces for two relevant example applications: the investigation of diffusion phenomena in liquid water and the equilibration of nanostructured amorphous battery materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Revealing the Phase Separation Behavior of Thermodynamically Immiscible Elements in a Nanoparticle

Phase-separation is commonly observed in multimetallic nanomaterials, yet it is not well understood how immiscible elements distribute in a thermodynamically stable nanoparticle. Herein, we studied the phase-separation of Au and Rh in nanoparticles using electron microscopy and tomography techniques. The nanoparticles were thermally annealed to form thermodynamically stable structures. HAADF-STEM and EDS characterizations reveal that Au and Rh segregate into two domains while their miscibility is increased. Using aberration-corrected HAADF-STEM and atomic electron tomography, we show that the increased solubility of Au in Rh is achieved by forming Au clusters and single atoms inside the Rh domains and on the Rh surface. Furthermore, based on the three-dimensional reconstruction of a AuRh nanoparticle, we can visualize the uneven interface that is embedded in the nanoparticle. Finally, the results advance our understanding on the nanoscale thermodynamic behavior of metal mixtures, which is crucial for the optimization of multimetallic nanostructures for many applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Voltage-induced modulation of interfacial ionic liquids measured using surface plasmon resonant grating nanostructures

We have used surface plasmon resonant metal gratings to induce and probe the dielectric response (i.e., electro-optic modulation) of ionic liquids (ILs) at electrode interfaces. Here, the cross-plane electric field at the electrode surface modulates the refractive index of the IL due to the Pockels effect. This is observed as a shift in the resonant angle of the grating (i.e., Δϕ), which can be related to the change in the local index of refraction of the electrolyte (i.e., Δnlocal). The reflection modulation of the IL is compared against a polar (D2O) and a non-polar solvent (benzene) to confirm the electro-optic origin of resonance shift. The electrostatic accumulation of ions from the IL induces local index changes to the gratings over the extent of electrical double layer (EDL) thickness. Finite difference time domain simulations are used to relate the observed shifts in the plasmon resonance and change in reflection to the change in the local index of refraction of the electrolyte and the thickness of the EDL. Simultaneously using the wavelength and intensity shift of the resonance enables us to determine both the effective thickness and Δn of the double layer. We believe that this technique can be used more broadly, allowing the dynamics associated with the potential-induced ordering and rearrangement of ionic species in electrode–solution interfaces.

Chemistry↗
DOE OSTI2026

Enhancing NO Reduction by CO Over NiO/CeO 2 Catalyst by Optimizing the Metal Oxide–Support Interaction

Noble metal catalysts are widely used in three-way catalysts (TWCs) due to their high efficiency, but their scarcity and high cost drive the need for effective, low-cost alternatives. Here, in this work, a series of NiO/CeO 2 catalysts were engineered by modulating the OH content and crystallite size of the CeO 2 support. This approach yielded Ni species ranging from isolated single atoms to small clusters and larger aggregates, with varied NiO/CeO 2 interaction strengths. Evaluation of their performance in NO reduction by CO, CO oxidation, and the water–gas shift reaction revealed that the NiO/CeO 2 -300 catalyst, featuring small CeO 2 crystallites and highly dispersed NiO clusters, delivered superior activity for NO reduction and CO oxidation. It was demonstrated that small NiO clusters, due to their efficient CO adsorption and activation, were more active than Ni single atoms. Furthermore, the presence of water was found to influence the catalyst stability, with NiO clusters less stable than single atoms likely due to the hydroxylation effect leading to the formation of Ni(OH) 2 . Oxygen storage capacity measurements revealed that performance was governed by a combination of CeO 2 crystallite size and the abundance of NiO/CeO 2 interfaces. These findings demonstrated that the catalytic performance of Ni/CeO 2 systems could be maximized by optimizing the Ni nanostructure and its interaction with CeO 2 support, positioning them as a promising, multifunctional nonprecious alternative for three-way catalysis application.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Constructing high-performance radiation-resistant ternary YSZ-MgO-CNT nanocomposites via tailored nanostructures

Developing long-lifetime bulk-form ceramic-based materials with high irradiation resistance is crucial for advanced nuclear systems. Here, we incorporated carbon nanotubes (CNTs) into yttria-stabilized zirconia (YSZ) and magnesia (MgO) nanocrystals to fabricate bulk YSZ-MgO-CNT nanocomposites with abundant ternary nanostructures by spark plasma sintering. To understand the role of tailored ternary nanostructure on irradiation, we investigated the microstructure and mechanical properties evolutions of the YSZ-MgO-CNT nanocomposites irradiated by multi-energy He + ions at high temperature to different fluences. Compared with the single-phase YSZ and ultrafine-grained YSZ-MgO composites, the YSZ-MgO-CNT nanocomposites possessed higher ability to manage irradiation-induced He bubbles/defects via the defect-interface interactions of proposed “loading-unloading” and “loading-transporting-unloading” mechanisms for controlling the dynamical behaviors of He atoms/defects in the CNT-doped ternary nanostructures, thereby presenting more stable microstructure and better performance in resisting irradiation hardening. In conclusion, this work provides insight into the design of advanced inert matrix nuclear fuel and new nuclear waste management materials.

36 MATERIALS SCIENCE↗