Search NASA⌕ Search

SEARCH · Search NASA

Results for “near surface”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

Ocean radar backscatter relationship with near-surface winds - A case study during Fasinex

A case study of the ocean radar backscatter dependence on near-surface wind and wind stress is presented using the data obtained on February 18, 1986 during the Frontal Air-Sea Interaction Experiment. The particular wind-wave conditions and their variations across a sharp sea surface temperature front are described. The small change in wind speed across the front cannot account for the large change in wind stress implying significant changes in the drag coefficient and surface roughness length. The results strengthen the hypothesis that radar backscatter is closely correlated to wind stress, and therefore, could be used for remote sensing of the wind stress itself over the global oceans.

Li, F.↗
NASA NTRS2000

An optical technique for remote sensing of near-surface turbulence

Measurements of turbulent kinetic energy dissipation rates (TKE) or temperature dissipation rates of the the near-surface boundary layer are needed to understand air-sea exchange processes and rates. The capability to accurately estimate these variables by means of a remote technique is relevant to a number of questions ranging from the air-sea transfer of heat and gas to the fate of pollutants.

turbulence optical instrumentation surface process↗
NASA NTRS2003

The Global Three Dimensional Distribution and Temperature of Near-Surface Martian Ground Ice: New Results from MGS TES

We have discovered significant global-scale seasonal thermal anomalies in the MGS TES surface temperature observations that coincide spatially with the Odyssey GRS observations of enhanced near-surface hydrogen abundance. The TES thermal anomalies can be explained quantitatively by the widespread presence of cold, high thermal inertia material within millimeters to centimeters of the surface that we interpret as evidence for ground ice that must extend to depths of many meters. The results provide significant insights into the properties and processes that govern the behavior of Martian water under current climatic conditions, the surface geology of the planet, as well as much higher resolution Martian ground ice maps than have been previously available.

D A Paige↗
DOE OSTI2024

Observing magnetoanisotropic weak antilocalization in near-surface quantum wells

We investigate the effects of an in-plane magnetic field on the weak antilocalization signature of near-surface quantum wells lacking bulk and inversion symmetry. The measured magnetoconductivity, which is conductivity as a function of the out-of-plane magnetic field, exhibits a strong anisotropy with respect to the direction of the in-plane magnetic field. The twofold symmetry of the observed magnetoanisotropy originates from the competition between Rashba and Dresselhaus spin-orbit couplings. The high sensitivity of the weak antilocalization to the spin texture produced by the combined Zeeman and spin-orbit fields results in very large anisotropy ratios, reaching 100%. Using a semiclassical universal model in quantitative agreement with the experimental data, we uniquely determine the values of the Dresselhaus and Rashba parameters as well as the effective in-plane g-factor of the electrons. Understanding these parameters provides prospects for different applications ranging from spintronics to topological quantum computing. Published by the American Physical Society 2024

Farzaneh, S. M. (ORCID:0000000341450991)↗
DOE OSTI2023

Efficient Super-Resolution of Near-Surface Climate Modeling Using the Fourier Neural Operator

Downscaling methods are critical in efficiently generating high-resolution atmospheric data. However, state-of-the-art statistical or dynamical downscaling techniques either suffer from the high computational cost of running a physical model or require high-resolution data to develop a downscaling tool. Here, we demonstrate a recently proposed zero-shot super-resolution method, the Fourier neural operator (FNO), to efficiently perform downscaling without the need for high-resolution data. Because the FNO learns dynamics in Fourier space, FNO is a resolution-invariant emulator; it can be trained at a coarse resolution and produces emulation at any high resolution. We applied FNO to downscale a 4-km resolution Weather Research and Forecasting (WRF) Model simulation of near-surface heat-related variables over the Great Lakes region. The FNO is driven by the atmospheric forcings, and topographic features used in the WRF model at the same resolution. We incorporated a physics-constrained loss in FNO by using the Clausius-Clapeyron relation to better constrain the relations among the emulated states. Trained on merely 600 WRF snapshots at 4-km resolution, the FNO shows comparable performance with a widely used convolutional network, U-Net, achieving averaged modified Kling-Gupta Efficiency of 0.88 and 0.94 on the test dataset for temperature and pressure, respectively. We then employed the FNO to produce 1-km emulations to reproduce the fine climate features. Further, by taking the WRF simulation as ground truth, we show consistent performances at the two resolutions, suggesting the reliability of FNO in producing high-resolution dynamics. Our study demonstrates the potential of using FNO for zero-shot super-resolution in generating first-order estimation on atmospheric modeling.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1993

Three-dimensional numerical simulation of near-surface flows over the Martian north polar cap

Measurements made by Viking Lander VL-2 (48 N) have shown that the near-surface wind and temperature regime on Mars displays striking similarities to terrestrial counterparts. The diurnal radiative cycle is responsible for establishment of a well-defined thermal circulation in which downslope (Katabatic) flows prevail during the nighttime hours and weak upslope (anabatic) conditions prevail during the daytime. Previous work has indicated that the slope flows are much like those found on Earth, particularly the Katabatic winds, which show striking similarities to drainage flows observed over Antarctica. The low-level wind regime appears to be an important factor in the scouring of the martian landscape. The north polar cap shows evidence of eolian features such as dunes, frost streaks, and grooves from Viking imagery. The direction of the prevailing wind can in cases be inferred from the eolian features. We examine the thermally induced flows that result from the radiative heating and cooling of the martian north polar region using a comprehensive three-dimensional atmospheric mesoscale numerical model. The same model has been used previously for simulation of Antarctic Katabatic winds. The model equations are written in terrain-following coordinates to allow for irregular terrain; prognostic equations include the flux forms of the horizontal momentum equations, temperature, continuity. A surface energy budget equation is also incorporated in which the surface temperature is determined. Explicit parameterization of both terrestrial (longwave) and solar (shortwave) radiation is included. Turbulent transfer of heat and momentum in the martian atmosphere is assumed to follow the similarity expressions in the surface boundary layer on Earth. The terrain heights for the martian north polar region have been obtained from the U.S. Geological Survey map and digitized onto a 57x57 grid with a spacing of 75 km. The resulting terrain map is shown in Fig. 1. The vertical grid consists of 15 levels (delta equals 0.998, 0.99, 0.98, 0.97, 0.96, 0.94, 0.92, 0.90, 0.85, 0.775, 0.70, 0.60, 0.50, 0.30, 0.10). The high resolution in the lower atmosphere is necessary to capture details of the boundary layer flows. The lowest level corresponds to a height of approximately 20 m above the ground, the seconds level 100 m.

Parish, Thomas R.↗
DOE OSTI2022

Microstructure Changes Observed in the Near-Surface Region of SRF Nb Cavities Cutouts upon Cooling/Heating Cycles Using GI-Synchrotron XRD

We have mapped microstructural changes in the near-surface region of Nb from SRF cavity-cutouts upon thermal cycles in the range from 300 to 30 K using grazing incidence synchrotron X-Ray diffraction (GIXRD). Segregation of secondary phases was observed after the thermal cycle, and their nature has been clarified and discussed in view of previous studies on hydrides formation in SRF bulk Nb cavities. The temperature dependence of the relative population of these formed phases was obtained from GIXRD patterns profile fitting. Both, Nb bulk matrix and the new phases formed after cool-down show specific structural features as thermal contraction/expansion, structural transitions, and Nb lattice variation due to the induced strain by precipitates formation. The information derived from this structural study can explain some phenomena as the dissipation at high accelerating field (i.e. High Field Q Slope, HFQS) in the Nb SRF performance as well as new mechanisms never addressed in previous studies.

43 PARTICLE ACCELERATORS↗
NASA NTRS2022

Diurnal Waves Forced By Horizontal Convergence of Near-Surface Winds on Mars

Boundary-layer winds near steeply sloped topography excite a distinct type of atmospheric wave. Basic properties of the waves were determined through analysis of 7 Mars years of temperature profiles from the Mars Climate Sounder on Mars Reconnaissance Orbiter. A more complete understanding of the waves was derived from a simulation with the NASA Ames Mars General Circulation Model. This type of wave appears in the tropics in the vicinity of conspicuous surface features, such as large volcanoes and the rim of Isidis Planitia. The amplitude is typically 5–10 K, the vertical wavelength is about 40 km, the zonal wavelength is about 1400 km, and the zonal phase speed relative to the surface is about 25 m s−1. The wave forcing comes from horizontal convergence of the near-surface winds, which generates a daily surge in the vertical winds. These convergence zones were not previously recognized as an important source of atmospheric waves on Mars. Strong forcing occurs only within a limited range of local time, producing wave packets (diurnal pulses) rather than steady oscillations. Waves are present throughout the year and their properties vary with season. Near the solstices, the wave amplitude is largest in the tropics of the summer hemisphere, where the convergence zones are stronger than in the winter hemisphere. The diurnal-mean zonal winds, which vary with latitude and season, control the direction of propagation of the predominant waves through filtering by critical levels.

Mars↗
NASA NTRS1974

Lunar near-surface structure

Seismic refraction data obtained at the Apollo 14, 16, and 17 landing sites permit a compressional wave velocity profile of the lunar near surface to be derived. Beneath the regolith at the Apollo 14 Fra Mauro site and the Apollo 16 Descartes site is material with a seismic velocity of about 300 m/sec, believed to be brecciated material or impact-derived debris. Considerable detail is known about the velocity structure at the Apollo 17 Taurus-Littrow site. Seismic velocities of 100, 327, 495, 960, and 4700 m/sec are observed. The depth to the top of the 4700-m/sec material is 1385 m, compatible with gravity estimates for the thickness of mare basaltic flows, which fill the Taurus-Littrow valley. The observed magnitude of the velocity change with depth and the implied steep velocity-depth gradient of more than 2 km/sec/km are much larger than have been observed on compaction experiments on granular materials and preclude simple cold compaction of a fine-grained rock powder to thicknesses of the order of kilometers.

Cooper, M. R.↗
NASA NTRS1976

Correlation between multispectral photography and near-surface turbidities

Four-band multispectral photography obtained from an aerial platform at an altitude of about 10,000 feet has been utilized to measure near-surface turbidity at numerous sampling sites in the Ross Barnett Reservoir, Mississippi. Correlation of the photographs with turbidity measurements has been accomplished via an empirical mathematical model which depends upon visual color recognition when the composited photographs are examined on either an I squared S model 600 or a Spectral Data model 65 color-additive viewer. The mathematical model was developed utilizing least-squares, iterative, and standard statistical methods and includes a time-dependent term related to sun angle. This model is consistent with information obtained from two overflights of the target area - July 30, 1973 and October 30, 1973 - and now is being evaluated with regard to information obtained from a third overflight on November 8, 1974.

Wertz, D. L.↗
NASA NTRS2014

A Semiautomated Multilayer Picking Algorithm for Ice-sheet Radar Echograms Applied to Ground-Based Near-Surface Data

Snow accumulation over an ice sheet is the sole mass input, making it a primary measurement for understanding the past, present, and future mass balance. Near-surface frequency-modulated continuous-wave (FMCW) radars image isochronous firn layers recording accumulation histories. The Semiautomated Multilayer Picking Algorithm (SAMPA) was designed and developed to trace annual accumulation layers in polar firn from both airborne and ground-based radars. The SAMPA algorithm is based on the Radon transform (RT) computed by blocks and angular orientations over a radar echogram. For each echogram's block, the RT maps firn segmented-layer features into peaks, which are picked using amplitude and width threshold parameters of peaks. A backward RT is then computed for each corresponding block, mapping the peaks back into picked segmented-layers. The segmented layers are then connected and smoothed to achieve a final layer pick across the echogram. Once input parameters are trained, SAMPA operates autonomously and can process hundreds of kilometers of radar data picking more than 40 layers. SAMPA final pick results and layer numbering still require a cursory manual adjustment to correct noncontinuous picks, which are likely not annual, and to correct for inconsistency in layer numbering. Despite the manual effort to train and check SAMPA results, it is an efficient tool for picking multiple accumulation layers in polar firn, reducing time over manual digitizing efforts. The trackability of good detected layers is greater than 90%.

Antarctic Ice-Sheet↗
DOE OSTI2021

Effect of capping layers on the near-surface region of SrVO 3 films

Surfaces of correlated-electron oxides are of significant interest both from fundamental and applied perspectives. Many such oxides feature a near-surface region (NSR) which differs from the bulk’s properties. The NSR can significantly affect the interpretation of the material’s electronic structure, especially for those in thin film form, and have detrimental effects for applications such as field effect devices and catalysts. In this work we study the changes in the composition and electronic structure of the NSR of SrVO 3 (SVO) thin films. We employ x-ray photoelectron spectroscopy (XPS) and compare TiOx-capped SVO films to identical uncapped films that were exposed to ambient conditions. The significant over-oxidation of the SVO surface in the bare film, illustrated by a primary V 5+ component, is prevented by the TiO x layer in the capped film. Furthermore, the capped film further exhibits a decrease in Sr surface phases. These results demonstrate the importance and potential of such capping layers in preserving the bulk properties of correlated oxides in their NSR, enabling more accurate probes for their underlying physics and offering a route for their integration into devices.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Dynamic Restructuring Induced Oxygen Activation on AgCu Near Surface Alloys

Recent studies have shown that the addition of Cu to Ag catalysts improves their epoxidation performance by increasing the overall selectivity of the bimetallic catalyst. We have prepared AgCu near-surface alloys and used scanning tunneling microscopy to gain an atomistic picture of O 2 dissociation on the bimetallic system. These data reveal a higher dissociative sticking probability for O 2 on AgCu than Ag(111), and density functional theory (DFT) confirms that the O 2 dissociation barrier is 0.17 eV lower on the alloy. Surprisingly, we find that after a slow initial uptake of O 2 , the sticking probability increases exponentially. Further DFT calculations indicate that surface oxygen reverses the segregation energy for AgCu, stabilizing Cu atoms in the Ag layer. These single Cu atoms in the Ag surface are found to significantly lower the O 2 dissociation barrier. Altogether, these results explain nonlinear effects in the activation of O 2 on this catalytically relevant surface alloy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1997

Near-Surface Geologic Units Exposed Along Ares Vallis and in Adjacent Areas: A Potential Source of Sediment at the Mars Pathfinder Landing Site

A sequence of layers, bright and dark, is exposed on the walls of canyons, impact craters and mesas throughout the Ares Vallis region, Chryse Planitia, and Xanthe Terra, Mars. Four layers can be seen: two pairs of alternating dark and bright albedo. The upper dark layer forms the top surface of many walls and mesas. The upper dark-bright pair was stripped as a unit from many streamlined mesas and from the walls of Ares Valles, leaving a bench at the top of the lower dark layer, approximately 250 m below the highland surface on streamlined islands and on the walls of Ares Vallis itself. Along Ares Vallis, the scarp between the highlands surface and this bench is commonly angular in plan view (not smoothly curving), suggesting that erosion of the upper dark-bright pair of layers controlled by planes of weakness, like fractures or joints. These near-surface layers in the Ares Vallis area have similar thicknesses, colors, and resistances to erosion to layers exposed near the tops of walls in Valles Marineris (Treiman et al.) and may represent the same pedogenic hardpan units. From this correlation, and from analogies with hardpans on Earth, the light-color layers may be cemented by calcite or gypsum. The dark layers are likely cemented by an iron-bearing mineral. Mars Pathfinder instruments should permit recognition and useful analyses of hardpan fragments, provided that clean uncoated surfaces are accessible. Even in hardpan-cemented materials, it should be possible to determine the broad types of lithologies in the Martian highlands. However, detailed geochemical modeling of highland rocks and soils may be compromised by the presence of hardpan cement minerals.

Treiman, Allan H.↗
NASA NTRS2000

Tropical Convective Outflow and Near Surface Equivalent Potential Temperatures

We use clear sky heating rates to show that convective outflow in the tropics decreases rapidly with height between the 350 K and 360 K potential temperature surfaces (or between roughly 13 and 15 km). There is also a rapid fall-off in the pseudoequivalent potential temperature probability distribution of near surface air parcels between 350 K and 360 K. This suggests that the vertical variation of convective outflow in the upper tropical troposphere is to a large degree determined by the distribution of sub cloud layer entropy.

Folkins, Ian↗
NASA NTRS1991

Molecular dynamics and quasidynamics simulations of the annealing of bulk and near-surface interstitials formed in molecular-beam epitaxial Si due to low-energy particle bombardment during deposition

The relaxation, diffusion, and annihilation of split and hexagonal interstitials resulting from 10 eV Si irradiation of (2x1)-terminated Si(100) are investigated. Molecular dynamics and quasidynamics simulations, utilizing the Tersoff many-body potential are used in the investigation. The interstitials are created in layers two through six, and stable atomic configurations and total potential energies are derived as a function of site symmetry and layer depth. The interstitial Si atoms are allowed to diffuse, and the total potential energy changes are calculated. Lattice configurations along each path, as well as the starting configurations, are relaxed, and minimum energy diffusion paths are derived. The results show that the minimum energy paths are toward the surface and generally involved tetrahedral sites. The calculated interstitial migration activation energies are always less than 1.4 eV and are much lower in the near-surface region than in the bulk.

Kitabatake, M.↗
DOE OSTI2021

Near-Surface Warming Reduces Dew Frequency in China

Long-term (1961-2010) observations of dew data collected at 597 stations over China show that dew frequency decreased by 5.2 days per decade due primarily to near-surface warming and associated decreases in relative humidity (RH). Moreover, the percentage decreasing rate of dew frequency in arid regions (precipitation PR < 400 mm yr -1 ) are larger than that in humid regions (PR ≥ 800 mm yr -1 ). Compared with the 1960s, the mean dew frequency in the 2000s decreased by 28%, 40%, 50% in humid, semi-humid (400 ≤ PR<800 mm yr -1 ), and arid regions, respectively. Surface warming is larger in arid regions in northwestern China than its humid and semi-humid regions during recent global warming, which leads to larger decreases in surface RH and makes dew events less likely. Here, since dew contributes significantly to surface water balance in arid regions, the large decreases in dew frequency may contribute to "the drier getting drier" response to global warming over arid regions.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Comparative Evaluation of the Ability of the MYNN‐EDMF PBL Scheme in WRF Model to Reproduce Near Surface Wind Speed Over Different Topographical Types

Abstract This study systematically evaluates the performance of the Mellor‐Yamada‐Nakanishi‐Niino‐Eddy‐Diffusion‐Mass‐Flux planetary boundary layer (PBL) scheme within the Weather Research and Forecasting (WRF) model in simulating near‐surface wind speeds across various topographies in New York State (NYS). Simulated wind speeds are compared with in‐situ measurements from 22 surface sites, grouped into six topographic categories: continental plain (CT), lakeside (LS), river valley (RV), Long Island (LI), Block Island (BI), and offshore ocean (OO). A quantitative evaluation based on Relative Euclidean Distance shows that wind speeds at the OO site are the most accurately reproduced, followed by those at LI sites, while the model performs less accurately for the remaining topographic groups. Wind speeds over CT sites tend to be overestimated by approximately 1 m/s, although their diurnal variability (DV) is well captured. In contrast, the model underestimates wind DV at LS, RV, LI, and BI sites, with the largest biases occurring at LI and BI, resulting in underestimated daytime wind speed and/or overestimated nighttime wind speed. The OO winds exhibit minimal diurnal variation, accurately captured by our WRF model. The surface wind diurnal variation is closely linked to PBL development. Among the indicators of PBL development, surface potential temperature biases most strongly correlate with wind speed biases. Our WRF model faces challenges in capturing the distinctions between winds influenced by local circulations and those over continental plains, and the significantly stronger winds at OO compared to BI. Potential causes for these biases are discussed, offering pathways for improving surface wind simulations in future.

54 ENVIRONMENTAL SCIENCES↗