NO Oxidation by Activated Carbon Catalysts: Impact of Carbon Characteristics, Pressure, and the Presence of Water
Not Available
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
SEARCH · Search NASA
Results for “nitrogen adsorption”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Interaction of gases with lunar materials - Preliminary results
Gas interaction with lunar fines, investigating carbon monoxide, nitrogen, oxygen, argon and water vapor adsorption
Becker, K.↗
Experimental and Numerical Investigation of Adsorption/Desorption in Packed Sorption Beds Under Ideal and Non-Ideal Flows
The importance of the wall effect on packed beds in the adsorption and desorption of carbon dioxide, nitrogen, and water on molecular sieve 5A of 0.127 cm in radius is examined experimentally and with one-dimensional computer simulations. Experimental results are presented for a 22.5-cm long by 4.5-cm diameter cylindrical column with concentration measurements taken at various radial locations. The set of partial differential equations are solved using finite differences and Newman's method. Comparison of test data with the axial-dispersed, non-isothermal, linear driving force model suggests that a two-dimensional model (submitted to Separation Science and Technology) is required for accurate simulation of the average column breakthrough concentration. Additional comparisons of test data with the model provided information on the interactive effects of carrier gas coadsorption with CO2, as well as CO2-H2O interactions.
Mohamadinejad, H.↗
Simulated moving bed-inspired method for continuous adsorptive denitrogenation of model fuel
Efficient, continuous routes for removing nitrogen-containing compounds from hydrothermal liquefaction-derived synthetic aviation fuel are needed to enable direct blending with conventional jet fuels. Here, we report a simulated moving bed-inspired process for adsorptive denitrogenation of a model fuel. Unlike conventional simulated moving bed systems, which are designed for sharp separations between similar solutes, this approach was run deliberately outside the classical separation region so that both pyridine and indole were removed together from the hydrocarbon stream. Alcohol solvents were used to regenerate the silica adsorbent, maintaining performance over extended operation and avoiding the downtime and energy demand associated with calcination. Under these conditions, the system demonstrates removal of more than 98% of nitrogen while cutting solvent use by 28% compared to batch operation. Classical modeling tools predicted column concentration profiles even in this nontraditional regime, suggesting a straightforward path to scaling. Together, these results motivate solvent-efficient, continuous denitrogenation strategies that could be integrated with biorefinery processes.
Adsorption↗
Does boron or nitrogen substitution affect hydrogen physisorption on open carbon surfaces?
Incorporation of heteroatoms in carbon materials is commonly expected to influence their physical or chemical properties. Furthermore, contrary to previous results for methane adsorption, no technologically significant effect was identified for the hydrogen physisorption energies (measured 4.1–4.6 kJ mol –1 and calculated q st = –ΔH ads = 4.1 ± 0.7 kJ mol –1 using a comprehensive set of levels of theory) as a function of B- and N-substitution of a mid-plane C-site on open carbon surfaces.
08 HYDROGEN↗
Characterizing Complex Gas–Solid Interfaces with in Situ Spectroscopy: Oxygen Adsorption Behavior on Fe–N–C Catalysts
Electrocatalysts for the oxygen reduction reaction within polymer electrolyte membrane fuel cells based on iron, nitrogen, and carbon elements (Fe–N–C) are receiving significant research attention as they offer an inexpensive alternative to catalysts based on platinum-group metals. Although both the performance and the fundamental understanding of Fe–N–C catalysts have improved over the past decade, there remains a need to differentiate the relative activity of different active sites. Toward this goal, our study is focused on characterizing the interactions between O 2 and a set of five structurally different Fe–N–C materials. Detailed characterization of the Fe speciation was performed with 57 Fe Mössbauer spectroscopy and soft X-ray absorption spectroscopy of the Fe L 3,2 -edge, whereas nitrogen chemical states were investigated with X-ray photoelectron spectroscopy (XPS). In addition to initial sXAS and XPS measurements performed in ultra-high vacuum (UHV), measurements were also performed (at the identical location) in an atmosphere of 100 mTorr of O 2 at 80 °C (O 2 -rich). XPS and sXAS results reveal the presence of several types of FeNxCy adsorption sites. FeNxCy sites that are proposed as the most active ones do not show significant change (based on the techniques used in this study) when their environment is changed from UHV to O 2 -rich. Correlation with Mössbauer and sXAS results suggests that this is most likely due to the persistence of strongly adsorbed O 2 molecules from their previous exposure to air. However, other species do show spectroscopic changes from UHV conditions to O 2 -rich. This implies that these sites have a weaker interaction with O 2 that results in their desorption in vacuum conditions and re-adsorption when exposed to the O 2 -rich environment. The nature of these weakly and strongly O 2 -adsorbing FeN x C y sites is discussed in the context of different synthetic and processing parameters employed to fabricate each of these five Fe–N–C materials.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Effects of Supercritical CO 2 Injection on the Shale Pore Structures and Mass Transport Rates
Characterizing the pore structures and transport properties of low-permeability shales is critical for evaluating these formations as potential seals or storage sites for geological CO 2 sequestration. Here, we use low-pressure gas adsorption in conjunction with nuclear magnetic resonance (NMR) to characterize the pore-size distribution of shales before and after injection of supercritical CO 2 . Nitrogen gas was used as the detecting phase for the adsorption experiments and pentane liquid was used for the NMR experiments. We also performed time-resolved NMR and gravimetric microbalance measurements to observe mass transport during desaturation. We use these data to estimate the self-diffusion coefficient of pentane and changes in the saturation state of the pore network. We analyzed samples with a range of compositions from the Wolfcamp shale before and after exposure to supercritical CO 2 for 3 days. Integrating the gas adsorption and NMR data shows how supercritical CO 2 injection alters the pore-size distribution for pore sizes <1 nm to 1 mm. Finally, our results provide insights on how the pore structure and mass transport properties of different shale lithologies may evolve during storage of supercritical CO 2 .
58 GEOSCIENCES↗
Calcareous organic matter coatings sequester siderophores in alkaline soils
Although most studies on organic matter stabilization in soils have focused on adsorption to aluminosilicate and iron oxide minerals due to their strong interactions with organic nucleophiles, stabilization within alkaline soils has been empirically correlated with exchangeable Ca concentrations. Yet the extent of competing processes within natural soil remain unclear. We employed sub-micron scale techniques to investigate the minerology and organic carbon on individual fine particles within an alkaline soil from Eastern Washington. XRD, Mössbauer spectroscopy, TEM-EDX-SAED, and XPS analysis demonstrated a mineral assemblage dominated by quartz, feldspars, iron oxides, and calcite. Although exposed Si, Al, and Fe accounted for ~30% of the surface elemental composition, most of the organic carbon and nitrogen was associated with Ca-rich coatings. Adsorption isotherms of two siderophores with the same soil showed greater adsorption of pyoverdine compared with less polar enterobactin. Using NanoSIMS to map the distribution of isotopically labeled siderophores across the surfaces of fine grains, we observed a preference for binding to surfaces heavily coated with organic matter. We propose a mechanism of adsorption by which organic molecules aggregate within calcareous soils via calcium bridging, favoring the stabilization of larger molecules with a greater number of nucleophilic functional groups.
54 ENVIRONMENTAL SCIENCES↗
Effect of NO x and Water Variations on Iodine Loading of AgZ
Reprocessing of used nuclear fuel will result in the release of several volatile radionuclides that need to be removed from facility off-gas streams before their release to the environment. Iodine, one of these radionuclides, is expected to be primarily released in the dissolver off-gas stream as iodine (I 2 ) or methyl iodide (CH 3 I). Sorbents that target I 2 and CH 3 I removal from the DOG stream will need to adsorb iodine under elevated temperatures and in the presence of water vapor and nitrogen oxides (NO x ). Previous studies examining the adsorption of CH 3 I and I 2 in the presence of NO x gases by silver-exchanged mordenite (AgZ), a zeolite mineral considered for use in this application, have resulted in slightly inconsistent conclusions.
11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
Performance of Adsorption - Based CO2 Acquisition Hardware for Mars ISRU
Chemical processing of the dusty, low-pressure Martian atmosphere typically requires conditioning and compression of the gases as first steps. A temperature-swing adsorption process can perform these tasks using nearly solid-state hardware and with relatively low power consumption compared to alternative processes. In addition, the process can separate the atmospheric constituents, producing both pressurized CO2 and a buffer gas mixture of nitrogen and argon. To date we have developed and tested adsorption compressors at scales appropriate for the near-term robotic missions that will lead the way to ISRU-based human exploration missions. In this talk we describe the characteristics, testing, and performance of these devices. We also discuss scale-up issues associated with meeting the processing demands of sample return and human missions.
Finn, John E.↗
Diethylenetriamine-functionalized graphene oxide: Insights into ion adsorption and applications in rare earth element separation
The growing demand for critical minerals and materials requires atom- and energy-efficient, selective separations to overcome the challenges posed by the similar chemical and physical properties of the rare earth elements (REEs) and their low concentrations in unconventional domestic feedstocks. Here, in this study, we developed diethylenetriamine-functionalized graphene oxide (DETA-GO) as a membrane material for REE adsorption and separation. Synthesis conditions were optimized to maximize nitrogen incorporation while also preserving GO dispersibility for facile membrane fabrication. We investigated the mechanism of amine functionalization, the nitrogen-bonding configurations, the organization of the interlayer transport channels, and the resulting effects on ion and water transport for REE separations. Neat-GO and DETA-GO multilayer laminate membranes were fabricated by vacuum filtration onto polymer supports. To investigate the effects of amine functionalization, the membranes were characterized using scanning electron microscopy, Raman, Fourier transform infrared, and X-ray photoelectron spectroscopy, as well as grazing-incidence X-ray diffraction measurements. Ion permeation experiments with representative lanthanum (La 3+ ) and ytterbium (Yb 3+ ) solutions revealed enhanced ion adsorption and water transport through DETA-GO membranes compared to neat-GO. The strong affinity of the membranes for multivalent REEs was also validated with conductivity and inductively coupled plasma mass spectrometry measurements. Atomistic insight into the role of amine functionalization in modulating nanochannel architecture and long-term stability, optimizing adsorption sites, and regulating REE and water transport was obtained using classical molecular dynamics simulations. Collectively, our joint experimental and theoretical study demonstrates the potential of DETA-GO membranes for selective REE separations, offering insights into ion-binding mechanisms, water-transport properties, and nanochannel optimization for the recovery of critical materials from aqueous feedstocks.
Adsorbent↗
Co-Adsorption of Carbon Dioxide on Zeolite 13X in the Presence of Preloaded Water
Background: Carbon Dioxide removal is a key aspect of Life Support for long-duration missions - Need to improve Mass, Power, and Volume of systems; Cabin air has three major constituents - Oxygen and Nitrogen, Carbon dioxide (CO2), Water Vapor; The mechanism for strong CO2 adsorption in zeolites (and many sorbents) is also the same mechanism for H2O - Water vapor is selectively adsorbed over CO2.
Cmarik, Gregory E.↗
First-Principles Molecular Dynamics Simulations of Ammonia Adsorption onto MFI Zeolite Nanosheets
MFI zeolite nanosheet membranes are promising candidates for ammonia separation from nitrogen and hydrogen gases, yet questions remain on the origin of their high selectivity. Silanols, Si–OH, are present in high concentration at the surface of zeolite nanosheets, and force-field-based simulations indicate that surface adsorption at the silanols contributes to selectivity. Acidic silanol groups can chemically react with ammonia via transfer of a proton to form ammonium ions, which may further contribute to the ability of zeolite nanosheet membranes to separate ammonia from other gases. In this work, we used first-principles molecular dynamics techniques to simulate ammonia’s behavior within stacked MFI zeolite nanosheets. We found that at 523 K and a loading corresponding to 35 bar, conditions desired for the ammonia separation, about 30% of ammonia reacts with surface silanols. Our work explored H-bonding and proton transfer within this system.
ammonia↗
First Principles Molecular Dynamics Simulations of Ammonia Adsorption onto MFI Zeolite Nanosheets
MFI zeolite nanosheets membranes are promising candidates for ammonia separation from nitrogen and hydrogen, yet questions remain on the origin of their high selectivity. Silanols, Si-OH, are present in high concentration at the surface of zeolite nanosheets, and force-field-based simulations indicate that surface adsorption at the silanols contributes to selectivity. Silanols can chemically react with ammonia, which may further contribute to the ability of zeolite nanosheet membranes to separate it from other gases. In this work, we use first-principles molecular dynamics techniques to simulate ammonia’s behavior within stacked MFI zeolite nanosheets. We find that at 523 K and a loading corresponding to 35 bar, conditions desired for the ammonia separation, about 30% of ammonia reacts with surface silanols. Our work explores H-bonding and proton transfer within this system.
36 MATERIALS SCIENCE↗
Overview of the RCAP Presented at the ISRU Thermal Integration Meeting
An In-Situ Resource Utilization (ISRU) mission has been proposed for Mars. The ISRU mission would process Oxygen from the Carbon Dioxide in the Martian atmosphere or create Methane and Oxygen from the Martian soil and atmosphere. The Rapid Cycle Adsorption Pump (RCAP) is a proposed technology for Carbon Dioxide separation from residual gases (mainly Nitrogen and Argon) and pressurization for downstream chemical processing from the Martian atmosphere. The RCAP works by using a temperature swing adsorption cycle. We talk about the current RCAP technology development efforts at NASA (modeling, manufacturing, testing, and adsorbent development) and discuss the thermal challenges that are specific to this technology.
Iannetti, Anthony↗
Sequential Ammonia and Carbon Dioxide Adsorption on Pyrolyzed Biomass to Recover Waste Stream Nutrients
Untreated fecal waste in unsewered communities and reactive nitrogen (N) loading from wastewater and urine disposal are important environmental challenges. Through pyrolysis, untreated fecal waste can be converted into amine-rich carbon dioxide (CO 2 ) sorbents, the chemisorption of which tunes the surface chemistry toward ammonia (NH 3 ) uptake. We compared the N-loading potential within amine-rich pyrolyzed human solid waste through exposure to CO 2 followed by NH 3 with the N-loading potential on carboxyl-rich, pyrolyzed oxidized wood using sequential adsorption of isotopically labeled CO 2 and NH 3 . The total N content of pyrolyzed oxidized wood exposed once to NH3 was similar to native, pyrolyzed human solid waste (3.7% compared to 4.6%). However, sorption kinetics and spectroscopic evidence revealed distinct N forms between the two materials affecting subsequent CO 2 and NH 3 uptake. Tertiary amines comprised 70% of N in pyrolyzed waste, compared to only 53% in pyrolyzed oxidized wood. The high heat of adsorption of CO 2 on pyrolyzed human solid waste (50 kJ mol-1) at low concentrations (0.05 mmol CO 2 g -1 ) was indicative of CO 2 reactivity with tertiary amines, consistent with the formation of carbamic acid (Figure S1). Conversely, after exposure to NH 3 , pyrolyzed oxidized wood chemisorbed CO 2 at much higher concentrations (0.7 mmol CO 2 g-1), pointing to primary amines as the active functional moieties. Adsorption kinetics of pyrolyzed oxidized wood revealed continued, albeit diminishing NH 3 uptake with each consecutive CO 2 treatment, averaging 5.9 mmol NH 3 g -1 for the first NH 3 exposure event, and still 3.5 and 2.9 mmol NH 3 g -1 for the second and third. Penetration of 15 NH 3 and 13 CO 2 measured by NanoSIMS reached over 7 µm deep into both materials, explaining the large NH 3 capture. The significantly lower NH 3 adsorption compared to pyrolyzed oxidized wood may be a result of potassium (K) carbonate precipitation precluding a Lewis base interaction between NH 3 and chemisorbed CO 2 , suggested by a 2-fold increase in surface K concentrations after exposure of pyrolyzed human solid waste to CO 2 +NH 3 detected by XPS.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Mechanistic study of direct coupling of CO 2 and C 2 H 4 over atomically dispersed metal at graphene edges
Direct coupling of CO 2 and ethylene (hereinafter DCCE) to acrylic acid is valuable for valorizing CO 2 to manufacture acrylate-derived products. However, previous studies in DCCE have been limited on molecular catalysts with challenges in improving catalytic performance. In this work, we employed density functional theory calculations and ab initio molecular dynamics simulations to investigate the heterogeneous catalysis of DCCE over atomically dispersed metal centers at nitrogen-doped zigzag edge of graphene. Based on competitive adsorption and structural stability, Mo, Cr, V, Ru, and Ni active sites are chosen to explore the reaction kinetics. Here, we find that the activation barriers are determined by the charge redistribution at transition states, which explains the trend of activity for the C-C coupling and the hydrogen transfer, two key steps in DCCE. Furthermore, we show that the intramolecular hydrogen transfer (rate-limiting step) is hindered due to the lack of local coordinate at the active sites. We thus propose to use co-adsorbed water as a “proton-exchanger” following a water-assisted route, and show that the activation barriers are reduced over all metal centers. Particularly, water promotes the hydrogen transfer over metals with strong CO 2 -ethylene co-activation and facile C-C coupling kinetics, which could be considered promising for DCCE. In both mechanisms, the stability of metallactone intermediate can be used to predict the catalytic activity. It is anticipated that the insights from this work can provide guidelines for mimicking well-defined multifunctional active sites in molecular catalysts to design heterogeneous catalysts for such C-C coupling, which advances catalytic utilization of CO 2 .
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Influence of Water, Vacuum, and Temperature on Surface Conditions of a Zeolite‐based Molecular Sieve
Molecular sieves such as zeolite-based materials are ubiquitous in industrial separation processes. However, there is a significant gap in understanding the surface properties and adsorption mechanisms for commercial zeolites, as most research focuses on pure zeolite powders rather than industrially relevant forms. Here, this work addresses this gap in understanding by employing advanced characterization techniques, including positron annihilation spectroscopy, X-ray diffraction, scanning electron microscopy, X-ray fluorescence spectroscopy, X-ray photoelectron spectroscopy, liquid nitrogen sorption, and Fourier-transform infrared spectroscopy, to investigate the adsorption and desorption behavior of water in commercial zeolite 13X. Our research reveals insights into the pore-filling mechanisms, the impact of material binders on adsorption properties, and the dynamics of hydration and drying processes for zeolites. Monitoring changes on a minute scale allowed the distinction between fast and slow processes leading to sample drying. The identification of positronium bound to Na + ions indicated that water molecules remain in the vicinity of Na + ions after air-drying zeolite 13X. These findings highlight the importance of various environmental conditions in restoring zeolite properties to baseline after hydration, with significant implications for optimizing industrial processes. This work sets the direction for further research aimed at developing more efficient and robust separation techniques.
Beads Binder↗