Evaluation of novel depressed collector for linear-beam microwave tubes
Evaluation tests to demonstrate feasibility of increasing efficiency of linear beam microwave tubes using novel depressed collector
Alexovich, R. E.↗
SEARCH · Search NASA
Results for “novel”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
A novel imide synthesis via silyl-blocked diamines
Efforts have resulted in the production of some trimethylsilyl-blocked diamines, which have been employed in a novel manner for the synthesis of polyimide model compounds. Three new silicon-containing diamides were prepared by reacting 1 mol of bis-/N, N prime-bis (trimethylsilyl) -4-aminophonyl/-disubstituted silanes with 2 mol of phthalic anhydride, thus establishing the reactivity of fully silylated diamides in imide formation.
Pratt, J. R.↗
A novel method for measuring the polarization angle of satellite radio waves
One of the most important parameters for the study of the physics of the ionosphere is the columnar electron content. This can be obtained indirectly by measuring the Faraday rotation of signals emitted from satellites. Many different types of polarimeters have been developed for this purpose. Efforts to develop a new type of polarimeter, suitable for extensive network operation, led to a novel technique for measuring the polarization angle.
Antoniadis, D. A.↗
Exploratory study on the effects of novel diamine curing agents and isocyanate precursors on the properties of new epoxy and urethane adhesives
The effects of novel aromatic diamine structures on the adhesive properties of epoxy and polyurethane adhesives were studied. Aromatic diamines based on benzophenone and diphenyl-methane isomers were evaluated as curing agents for epoxy resins and benzophenone and diphenyl-methane based diamine isomers were evaluated as curing agents for polyurethane adhesives. Polyurethane adhesives were prepared based on m, m prime-diisocyanato-diphenyl-methane and m, m prime-diisocyanato-benzophenone. The m, m prime-diisocayanato-diphenyl-methane based adhesive had properties comparable to state-of-the-art adhesives. The m, m prime-diisocyanato-benzophenone based adhesive was extremely reactive.
Glasgow, D. G.↗
Preliminary evaluation of a novel polyimide adhesive for bonding titanium and reinforced composites
A novel polyimide has been developed which shows promise as an adhesive for bonding titanium-to-titanium, titanium-to-polyimide composite and composite-to-composite with excellent lap shear strengths at room temperature and moderate strengths at 288 C. The adhesive is a high molecular weight polyimide made from commercially available monomers. The use of an ether as the solvent for the polymerization and for application of the polyamic acid enhanced the adhesive properties of the polyimide. At room temperature, P13N/glass composite bonded to titanium or to itself failed primarily in the surface layer of the composite, whereas at 260 C the failure was primarily cohesive. Failure of the P13N/unidirectional HT-S graphite composite-to-titanium bonded composites occurred in the composite regardless of the test temperature. Preliminary shear results with cross-plied P13N/HT-S graphite composite-to-composite specimens showed failure in the bonded surface fibers.
Progar, D. J.↗
Probe corrected far-field reconstruction from measurements on a cylinder: A novel formulation and efficient algorithm
A novel and numerically efficient method of far field evaluation from measurements taken on a cylinder is based on the representation of both the antenna and the probe fields as superpositions of plane waves. A system of two integral equations are established whose unknown functions are the azimuthal and elevation components of the antenna pattern and whose known terms are the set of measurement data taken with two different probes - the second probe in most practical instances being simply the same probe with a different geometrical orientation. The equations express the known data - for each angular position of the antenna under measurement - as the integrals of the products of the corresponding components of the unknown antenna and known probe patterns multiplied by a phase term. The convolutional nature of the integral equations makes their solutions straight-forward. If, as is virtually always the case, the probe is small or of moderate size so that the axis of rotation of the antenna mount is in the far field of the probe, the intervention of asymptotic techniques makes the solution numerically very efficient. The agreement of calculated and experimental patterns is excellent.
Borgiotti, G. V.↗
The properties of novel bisimide amine cured epoxy/Celion 6000 graphite fiber composites
The study is concerned with the further development of bisimide amine cured epoxy resins first reported by Serafini et al. (1979). Attention is given to properties of the neat resins and composites made with these novel epoxy resins and Celion 6000 graphite fibers. The use of bisimide amine hardeners to cure epoxy resins causes a significant improvement in the char-forming characteristics of the cured resin. Compared to epoxy resins cured with a conventional amine, such as 4,4'-diaminodiphenylsulfone, the bisimide cured epoxies exhibit about a twofold improvement in the aerobic char yield at 800 C. The levels of moisture absorption exhibited by the bisimide amine cured epoxies were found to be considerably lower than those exhibited by state-of-the-art epoxies (0.5 wt.% versus 2.0%).
Scola, D. A.↗
Novel solution of 2-D waveguides using the finite element method
A novel technique is described for solving 2-D waveguide equations using the finite element method. The full-wave equation is solved, thus automatically taking care of various inhomogeneities in the medium. The solution yields the transverse components of the field, which are useful for calculating far-field radiation patterns.
Katz, J.↗
A novel input filter compensation scheme for switching regulators
A novel input-filter compensation scheme is proposed which uses feedforward loops to cancel the effects of peaking of the output impedance of the input filter, such that the converter is immune from performance degradation due to loop gain reduction. The scheme makes it possible to concurrently implement a high-performance converter and an effective input filter design with minimum weight and loss. A buck regulator with continuous current conduction is used as an example, and an analysis followed by a design procedure for the feedforward loops is presented.
Kelkar, S. S.↗
A novel feedforward compensation canceling input filter-regulator interaction
The interaction between the input and the control loop of switching regulators often results in deterimental effects, such as loop instability, degradation of transient response, and audiosusceptibility, etc. The concept of pole-zero cancelation is employed to mitigate some of these detrimental effects and is implemented using a novel feedforward loop, in addition to existing feedback loops of a buck regulator. Experimental results are presented which show excellent correlation with theory.
Kelkar, S. S.↗
Fabrication of p(+)-n junction GaAs solar cells by a novel method
A novel method for making p(+)-n diffused junction GaAs solar cells, with the formation of a diffusion source, an anti-reflective coating, and a protective cover glass in a single chemical-vapor deposition operation is discussed. Consideration is given to device fabrication and to solar-cell characteristics. The advantages of the technique are that the number of process steps is kept to an absolute minimum, the fabrication procedure is low-cost, and the GaAs surface is protected during the entire operation.
Ghandhi, S. K.↗
Textured carbon on copper: A novel surface with extremely low secondary electron emission characteristics
Experimentally determined values of true secondary electron emission and relative values of reflected primary electron yield for a range of primary electron beam energies and beam impingement angles are presented for a series of novel textured carbon surfaces on copper substrates. (All copper surfaces used in this study were oxygen-free, high-conductivity grade). The purpose of this investigation is to provide information necessary to develop high-efficiency multistage depressed collectors (MDC's) for microwave amplifier traveling-wave tubes (TWT's) for communications and aircraft applications. To attain the highest TWT signal quality and overall efficiency, the MDC electrode surface must have low secondary electron emission characteristics. While copper is the material most commonly used for MDC electrodes, it exhibits relatively high levels of secondary electron emission unless its surface is treated for emission control. The textured carbon surface on copper substrate described in this report is a particularly promising candidate for the MDC electrode application. Samples of textured carbon surfaces on copper substrates typical of three different levels of treatment are prepared and tested for this study. The materials are tested at primary electron beam energies of 200 to 2000 eV and at direct (0 deg) to near-grazing (85 deg) beam impingement angles. True secondary electron emission and relative reflected primary electron yield characteristics of the textured surfaces are compared with each other and with those of untreated copper. All the textured carbon surfaces on copper substrate tested exhibited sharply lower secondary electron emission characteristics than those of an untreated copper surface.
Curren, A. N.↗
A novel centrifugal diffuser test device
A large scale (2 in.-wide test vanes at 50-in. inlet diameter), low speed (100-200 ft/sec) steady flow radial cascade wind tunnel for diffuser studies was designed, built and tested. The apparatus was shown to provide flow angles (from radial) in the range of 58-72 deg with suitable spanwise profiles. The novel flow angle control mechanism was shown to work, but measured flow angles were somewhat smaller than expected. The mechanism for controlling case-wall boundary layer profile did not behave as predicted. Attempts to predict the generated flow both analytically and with computational codes are compared with initial measurements. The low speed apparatus will be used to obtain detailed data for diffuser design and analysis code verification, and to provide experience toward the design of a high speed device.
Shreeve, R. P.↗
Evaluation of a novel thermoplastic polyimide for bonding titanium
A novel hot-melt processable polyimide has been synthesized and characterized as an adhesive for a titanium alloy. This system shows potential for applications with service temperatures near 200 C. A bonding cycle was developed from preliminary processing studies. The bonded specimens were tested at room temperature, 177 C and 204 C both before and after aging in air at 204 C for times up to 1000 hours. There was no appreciable change in strength after aging. Bonded specimens were exposed to boiling water continuously for a 72 hour period. These specimens exhibited some loss in strength due to this rather severe exposure.
Progar, D. J.↗
A novel form of damper for turbo-machinery
Anti-swirl vanes are used by some manufacturers to delay the full development of half speed circulation in annular clearance spaces. The objective is to reduce the aerodynamic cross-coupling in the forward direction. The novel feature of a jet damper is a number of tangential nozzles discharging against the rotor surface speed. Some preliminary results on a 33.9 Kg rotor demonstrate that significant reductions in amplitude are obtained at the synchronous critical speeds.
Brown, R. D.↗
Simulation analysis of a novel high efficiency silicon solar cell
It is recognized that crystalline silicon photovoltaic module efficiency of 15 percent or more is required for cost-effective photovoltaic energy utilization. This level of module efficiency requires large-area encapsulated production cell efficiencies in the range of 18 to 20 percent. Though the theoretical maximum of silicon solar cell efficiency for an idealized case is estimated to be around 30 percent, practical performance of cells to-date are considerably below this limit. This is understood to be largely a consequence of minority carrier losses in the bulk as well as at all surfaces including those under the metal contacts. In this paper a novel device design with special features to reduce bulk and surface recombination losses is evaluated using numerical analysis technique. Details of the numerical model, cell design, and analysis results are presented.
Mokashi, Anant R.↗
Unsteady separated flows - Novel experimental approach
A novel experimental technique, commonly referred to as laser speckle velocimetry or particle image displacement velocimetry (PIDV), is developed for the measurement of instantaneous velocity fields in unsteady and steady flows. The main advantage of this technique is the fact that the velocity field is measured with sufficient accuracy so that the distribution of vorticity can be calculated with accuracy. The PIDV technique, which is ideally suited for the study of unsteady separated flows, has been utilized to measure the development of the separated flow field generated by a high angle-of-attack (alpha = 30 deg) NACA 0012 airfoil, started impulsively from rest.
Krothapalli, A.↗
A novel photovoltaic power system which uses a large area concentrator mirror
A preliminary analysis has been made of a novel photovoltaic power system concept. The system is composed of a small area, dense photovoltaic array, a large area solar concentrator, and a battery system for energy storage. The feasibility of such a system is assessed for space power applications. The orbital efficiency, specific power, mass, and area of the system are calculated under various conditions and compared with those for the organic Rankine cycle solar dynamic system proposed for Space Station. Near term and advanced large area concentrator photovoltaic systems not only compare favorably to solar dynamic systems in terms of performance but offer other benefits as well.
Arrison, Anne↗