Electrical and Optical Characterization of Surface Passivation in GaAs Nanowires
Explore the source record for details and available documents.
SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Explore the source record for details and available documents.
During the past three months, the MOCE Team conducted two field experiments in Mill Creek,Chesapeake Bay, from July 24 to August 4, and at the MOBY operations site at Snug Harbor, Honolulu, Hawaii, from August 15-30, prepared two technical memoranda, and continued MOCE-2 and MOCE-3 data reduction. The primary purposes of the experiments were to test the SeaWiFS 'remote sensing reflectance' protocol, obtain turbid water data for ocean color satellite algorithm development, perform calibration for both Near Infrared (NIR) and Visible Rainbow Spectrometer system, continue assembling the operational Marine Optical Buoy, and to test the MOBY cellular phone communications link at the Lanai mooring site.
Characterizing intrinsic defects is an essential step in evaluating materials for novel optoelectronic device applications. For photomultipliers, suppressing dark currents is critical, but a tradeoff is present between maximizing the band gap while remaining sensitive to the wavelength of interest and minimizing the incorporation of fresh defects by growing not-yet-optimized alloys. We present a series of capacitance-based measurements, including deep-level optical spectroscopy, steady-state photocapacitance, and illuminated capacitance-voltage, on photodiodes with lightly n-type Al x In y Ga 1−x−y P absorber regions. Several deep levels are identified, including one near the midgap. Although the inclusion of aluminum increases each trap density by approximately 10×, the hole capture cross-section also appears to decrease, suggesting that Shockley–Read–Hall dark currents may be suppressed. These materials may be good candidates for the development into silicon photomultiplier analogs with a wider bandgap for scintillator applications.
Using slow evaporation solution growth technique, single crystals of L-histidine-4-nitro phenolate has been grown from the solution. Structural analyses were carried out by powder x-ray diffraction, FT-Raman, Fourier Transform Infrared and Nuclear Magnetic Resonance spectral methods to conform the grown crystals. Thermal stability of the grown crystals was studied by thermo-gravimetric (TG) and differential thermal analyses (DTA). UV-Vis spectral analysis has been carried out to find the transparency of the grown crystal. Nonlinear optical property has been confirmed by Kurtz powder technique. The PL measurements were carried out in Perkin Elmer LS 55 Luminescence spectrometer using 410 nm as excitation wavelength. The observed properties have confirmed that the grown crystal is suitable for nonlinear optical applications.
ZnO, N-doped ZnO and Al-N co-doped ZnO thin films were deposited on ITO coated corning glass by spin coater using sol-gel method. The films were annealed in air at 450°C for one hour. The crystallographic structure and morphology of the films were studied by X-ray diffraction (XRD) and scanning electron microscopy (SEM) respectively. The X-ray diffraction results confirm that the thin films are of wurtzite hexagonal with a very small distortion. The optical properties were investigated by transmission spectra of different films using spectrophotometer (Shimadzu UV-VIS-NIR 3600). The results indicate that the N doped ZnO thin films have obviously enhanced transmittance in visible region. Moreover, the thickness of the films has strong influences on the optical constants.
The BICEP/Keck experiment (BK) is a series of small-aperture refracting telescopes observing degree-scale cosmic microwave background (CMB) polarization from the South Pole in search of a primordial B-mode signature. This B-mode signal arises from primordial gravitational waves interacting with the CMB and has amplitude parametrized by the tensor-to-scalar ratio r. Since 2016, BICEP3 and the Keck Array have been observing with 4800 total antenna-coupled transition-edge sensor detectors, with frequency bands spanning 95, 150, 220, and 270 GHz. Here we present the optical performance of these receivers from 2016 to 2019, including far-field beams measured in situ with an improved chopped thermal source and instrument spectral response measured with a field-deployable Fourier transform spectrometer. As a pair differencing experiment, an important systematic that must be controlled is the differential beam response between the co-located, orthogonally polarized detectors. We generate per-detector far-field beam maps and the corresponding differential beam mismatch that is used to estimate the temperature-to-polarization leakage in our CMB maps and to give feedback on detector and optics fabrication. The differential beam parameters presented here were estimated using improved low-level beam map analysis techniques, including efficient removal of non-Gaussian noise as well as improved spatial masking. These techniques help minimize systematic uncertainty in the beam analysis, with the goal of constraining the bias on r induced by temperature-to-polarization leakage to be subdominant to the statistical uncertainty. This is essential as we progress to higher detector counts in the next generation of CMB experiments.
Laser retroreflector arrays (LRAs) consisting of corner cube retroreflectors (CCRs) can act as fiducial markers for decades of laser ranging on the Moon and other planetary bodies. Upcoming lunar lander missions from government space agencies and commercial partners offer a unique opportunity to support lunar science and exploration through the deployment of small LRAs on lander decks. Placement of an LRA on the deck of a lander or rover enables tracking with an orbital laser altimeter to aprecision on the order of centimeters. When mounted alongside a suite of scientific instruments the LRA enables precise geolocation of those instruments in the lunar geodetic frame. Finally, optical markers such as LRAs can support precision autonomous navigation and landing regardless of lighting conditions, an especially valuable capability for lunar polar exploration where long shadows complicate terrain relative nagivation using imaging methods.
Organized chains of copper oxide nanoparticles were synthesized, without palladium (Pd) activation, using the M13 filamentous virus as a biological template. The interaction of Cu precursor ions with the negatively charged viral coat proteins were studied with Fourier transform infrared spectroscopy, transmission electron microscopy, and energy dispersive x-ray spectroscopy. Discrete nanoparticles with an average diameter of 4.5 nm and narrow size distribution were closely spaced along the length of the high aspect ratio templates. The synthesized material was identified as a mixture of cubic Cu₂O and monoclinic CuO. UV/Vis absorption measurements were completed and a direct optical band gap of 2.87 eV was determined using Tauc's method. This value was slightly larger than bulk, signaling quantum confinement effects within the templated materials.
Phase pure Dysprosium monoaluminate has been prepared from Dysprosium oxide and Aluminium nitrate by auto-ignition citrate complex combustion process. The phase formation has been investigated using X-ray diffraction analysis (XRD), Thermo-Gravimetric/Differential Thermal Analysis (TGA/DTA) and Fourier Transform Infrared (FT-IR) spectroscopy analysis. X-ray diffraction analysis (XRD) revealed that DyAlO{sub 3} has an orthorhombic perovskite structure. From Transmission Electron Microscopy (TEM) studies, average particle-size has been found to be as low as 45 nm. The absorption spectrum of the DyAlO{sub 3} nanoparticles shows characteristic absorption bands of Dy atom. The optical band gap of the material was found to be 5.15 eV, which corresponds to direct allowed transitions.
Performance of a multipoint, lean direct injection (MP-LDI) strategy for low emission aero-propulsion systems has been tested in a Jet-A fueled, lean flame tube combustion rig. Operating conditions for the series of tests included inlet air temperatures between 672 and 828 K, pressures between 1034 and 1379 kPa and total equivalence ratios between 0.41 and 0.45, resulting in equilibrium flame temperatures approaching 1800 K. Ranges of operation were selected to represent the spectrum of subsonic and supersonic flight conditions projected for the next-generation of commercial aircraft. This document reports laser-based measurements of in situ fuel velocities and fuel drop sizes for the NASA 9-point LDI hardware arranged in a 3 3 square grid configuration. Data obtained represent a region of the flame tube combustor with optical access that extends 38.1-mm downstream of the fuel injection site. All data were obtained within reacting flows, without particle seeding. Two diagnostic methods were employed to evaluate the resulting flow path. Three-component velocity fields have been captured using phase Doppler interferometry (PDI), and two-component velocity distributions using planar particle image velocimetry (PIV). Data from these techniques have also offered insight into fuel drop size and distribution, fuel injector spray angle and pattern, turbulence intensity, degree of vaporization and extent of reaction. This research serves to characterize operation of the baseline NASA 9- point LDI strategy for potential use in future gas-turbine combustor applications. An additional motive is the compilation of a comprehensive database to facilitate understanding of combustor fuel injector aerodynamics and fuel vaporization processes, which in turn may be used to validate computational fluid dynamics codes, such as the National Combustor Code (NCC), among others.
Highlights: • Preparation of Pd/Fe{sub 3}O{sub 4} nanowires as magnetically reusable catalysts. • The optical properties of the catalyst were studied using Gans theory. • N-arylation of benzylurea and in situ hydrogenolysis of 1-benzyl-3-arylureas. - Abstract: This paper reports the synthesis and use of Pd/Fe{sub 3}O{sub 4} nanowires, as magnetically separable catalysts for ligand-free amidation coupling reactions of aryl halides with benzylurea under microwave irradiation. Then, the in situ hydrogenolysis of the products was performed to afford the N-monosubstituted ureas from good to excellent yields. This method has the advantages of high yields, simple methodology and easy work up. The catalyst can be recovered by using a magnet and reused several times without significant loss of its catalytic activity. The catalyst was characterized using the powder XRD, SEM, EDS and UV–vis spectroscopy. Experimental absorbance spectra was compared with results from the Gans theory.
In this study, un-doped and Mg doped NiO nanoparticles have been synthesized through a simple sol-gel method. To investigate the effect of Mg-doping on the structure of NiO, the obtained nanoparticles were characterized using scanning electron microscopy (SEM). Flower/star like morphology was clearly observed in the SEM micrographs. The BET (Brunauer-Emmett-Teller) nitrogen absorption isotherm exhibits high specific surface area (∼37 m{sup 2} /g) for the Mg doped NiO nanoparticles. X-Ray diffraction (XRD) of the prepared Mg-NiO nanoparticles showed a face-centered cubic (f.c.c) structure, and the average particle size was estimated to be 32 nm using Scherrer’s formula. Energy Dispersive X-Ray (EDX) confirms that the NiO particles are successfully doped with Mg. Photoluminescence (PL) and UV-Vis optical absorption characteristics of the prepared nanoparticles have also been investigated in this study. The PL emission response showed a blue shift when NiO was doped with Mg, which is indicative of interstitial oxygen. The UV-Vis results demonstrate a band gap increase as NiO nanoparticles are doped with Mg.
Nanocomposites are advantageous because they can compensate for the disadvantages of the individual component, and induce a synergistic effect, such as an efficient charge separation and improvement of photostability. Present study reveals the advantage of nanocomposite CdS/TiO{sub 2} over TiO{sub 2} which have been prepared by a simple Co-precipitation method. The particle size of CdS/TiO{sub 2} estimated from X-ray diffraction pattern comes out to be {approx} 5.8 nm which is in good agreement with that of transmission electron microscopy. High resolution transmission electron microscopy showed a reduction in defect levels in the as prepared CdS/TiO{sub 2} nanocomposite in comparison to TiO{sub 2}. In our method titanium monoxide (TiO) phase has appeared at room temperature against the earlier reports. Williamson-Hall plot analysis revealed the presence of tensile strain in both the CdS/TiO{sub 2} and TiO{sub 2} samples. New Raman bands for rutile TiO{sub 2} have also been observed which have not been previously reported. UV-visible study reveals an enhanced absorption capability of the composite sample ({approx} 383.85 nm) in comparison to pure TiO{sub 2} ({approx} 331.37 and 324.40 nm).The optical and electrical results have shown the activation of the excited TiO{sub 2} in the presence of CdS. - Graphical Abstract: Nanocomposites are advantageous because they can compensate for the disadvantages of the individual component and induce a synergistic effect. Present study reveals the advantage of nanocomposite CdS/TiO{sub 2} over TiO{sub 2} prepared via simple Co-precipitation method. The optical and electrical results have shown the activation of the excited TiO{sub 2} in the presence of CdS. Research Highlights: {yields} Advantage of CdS/TiO{sub 2} over TiO{sub 2} prepared via Co-precipitation method. {yields} Appearance of positive slope has ensured the presence of tensile strain. {yields} New Raman bands for rutile TiO{sub 2} which has not been previously reported. {yields} Activation of the excited TiO{sub 2} in the presence of CdS rather than deactivation.
Metal/CaF{sub 2}/p-Si(111) capacitors with the improved-quality several-nanometer-thick epitaxial fluorite films are examined, aiming at solidifying a candidacy of this material for barrier layers in silicon devices. Structural and transport properties of a thin crystalline dielectric are characterized by different experimental techniques. The measured current-voltage characteristics accompanied with simulation results demonstrate that the elastic tunneling electron injection takes place in the considered structures. The same result follows from the behavior of hot-electron-injection-related electroluminescence within the selected spectral intervals. The result is important considering a perspective of using the epitaxial fluorides as barrier layers in resonant tunneling diodes.
This paper presents results in which we compare fuel staging and its effect on fuel spray pattern, velocity and speciation during combustion for several inlet conditions using a GE TAPS injector configuration. Planar laser-induced fluorescence (PLIF), particle image velocimetry (PIV) and phase Doppler interferometry (PDI) were used to investigate spray patterns and velocity. The 2D PIV provides slices in the flow of axial-vertical or axial horizontal velocity components. With 3D PDI, we obtained 3 components of velocity, and fuel drop sizes. Chemiluminescence imaging and spontaneous Raman scattering (SRS) were used to investigate flame structure, species location and relative species concentration. Phase Doppler and PIV data were acquired using scatter from fuel droplets; therefore, those data were obtained only at the pilot-only test points. Raman measurements were acquired only at 10/90 split points to avoid droplets.
Abstract In‐situ spectroscopic ellipsometry (SE) was employed to extract the complex dielectric functions ε = ε 1 + iε 2 over the spectral range of 0.75–6.5 eV for a set of polycrystalline CuIn 1− x Ga x Se 2 (CIGS) thin films with different alloy compositions x = [Ga]/{[In] + [Ga]}. For highest possible accuracy in ε for each CIGS thin film, specialized SE procedures were adopted including (i) deposition to a thickness of ~600 Å on smooth native oxide covered crystal silicon wafers, which minimizes the surface roughness on the film and thus the required corrections in data analysis, and (ii) measurement in‐situ , which minimizes ambient contamination and oxidation of the film surface. Assuming an analytical form for each of the ε spectra for these CIGS films, oscillator parameters were obtained in best fits, and these parameters were fit in turn to polynomials in x . With the resulting database of polynomial coefficients, the ε spectra for any composition of CIGS can be generated from the single parameter, x . In addition to enabling accurate contactless determination of bulk and surface roughness layer thicknesses of CIGS films by high speed multichannel SE, the database enables characterization of the composition and its profile with depth into these films, and even how the depth profile varies spatially within the plane of the films. In this study, depth profile parameters were found to correlate spatially with solar cell performance parameters. As a result, SE provides the capability of contactless compositional analysis of production‐scale CIGS photovoltaic modules at high speed. Copyright © 2016 John Wiley & Sons, Ltd.
Explore the source record for details and available documents.
The co-precipitation method was used to prepare Zn-Al-NO{sub 3}-LDH at different Zn{sup 2+}/Al{sup 3+} molar ratios (2, 3, 4, 5 and 6) and pH value of 7.5. The structure, textural, composition and morphological properties were investigated using powder X-ray diffraction (PXRD), thermogravimetric analysis (TGA), Fourier transform infrared (FT-IR) and scanning electron microscope (SEM), respectively. The crystallinity of LDH samples were found to improve as molar ratio decreased which is attributed to the distortion of the hydroxide layers networks of the LDH crystal by the larger difference in ionic radii of Zn{sup 2+} and Al{sup 3+}. The optical band gap energy of LDH samples were evaluated using absorbance data from UV-Vis-NIR Diffuse reflectance spectroscopy. Band gaps were affected by the variation of the Zn{sup 2+}/Al{sup 3+} molar ratio is due to the formation of the low crystalline phases (ZnO and ZnAl{sub 2}O{sub 4}). The water molecules and anionic NO{sub 3}{sup -} in the LDH interlayer were responsible for the generation of the dielectric response. This response can be described by an anomalous low frequency dispersion using the second type of Universal Power Law. The dominance of ZnO dipoles and charge carriers (NO{sub 3}{sup -} ions) in the dielectric relaxation increases with the increasing molar ratio. - Graphical abstract: (a) Schematic diagram of Zn-Al- NO{sub 3}-LDH shows the LDH structure, (b) Kubelka-Munk transformed reflectance spectra and c. The dielectric constant versus frequency of Zn-Al- NO{sub 3}-LDH samples. Highlights: Black-Right-Pointing-Pointer Zn-Al-NO{sub 3}-LDH was prepared at different Zn{sup 2+}/Al{sup 3+} molar ratios (2, 3, 4, 5 and 6). Black-Right-Pointing-Pointer The crystallinity of LDH phase decreased with increase of Zn{sup 2+}/Al{sup 3+} molar ratio. Black-Right-Pointing-Pointer The optical band gaps of LDH samples have been measured. Black-Right-Pointing-Pointer Dielectric response of LDH can be described by anomalous low frequency dispersion.