Search NASA⌕ Search

SEARCH · Search NASA

Results for “oxidation state analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Tracking oxygen vacancy migration in memristor devices using operando hard X-ray photoelectron spectroscopy

Fabrication of ultrathin (sub-2 nm) oxide semiconductor memristors poses the fundamental challenge of achieving oxide growth with atomic precision in terms of electronic structure and defect formation. Recently, ultrathin memristors consisting of bilayers of mixed Al 2 O 3 and MgO atomic layers were fabricated using an in vacuo atomic layer deposition process. This approach offers a unique platform for precise atomic control of oxygen vacancies in the device in which the vacancies are introduced by placing MgO atomic layers between pristine Al 2 O 3 layers. In this work, we present a systematic operando Hard X-ray PhotoElectron Spectroscopy (HAXPES) study of the switching of such memristors, combined with complementary current-voltage and capacitance-voltage (C-V) measurements. We used a memristor stack of Al 2 O 3 /MgO atomic layers, with the MgO-containing oxide deposited on the bottom Al metal electrode and a pure Al 2 O 3 layer below the top Pd electrode. HAXPES analysis shows a substantial change in the chemical shift of the Aluminum oxide when switching between the ”OFF” and ”ON” states indicative of a redistribution of oxygen vacancies in the device active layer. Interestingly, subsequent switching to the OFF state shows hysteretic behavior indicating the retention of some oxygen vacancies in the top Al 2 O 3 layer. This vacancy retention can be correlated with the stochastic behavior of the switching voltage observed in these devices. C–V measurements show a clear frequency-dependent response in the OFF state, consistent with enhanced polarization and vacancy trapping at low frequencies.

47 OTHER INSTRUMENTATION↗
DOE OSTI2020

PyXAS – an open-source package for 2D X-ray near-edge spectroscopy analysis

In the synchrotron X-ray community, X-ray absorption near-edge spectroscopy (XANES) is a widely used technique to probe the local coordination environment and the oxidation states of specific elements within a sample. Although this technique is usually applied to bulk samples, the advent of new synchrotron sources has enabled spatially resolved versions of this technique (2D XANES). This development has been extremely powerful for the study of heterogeneous systems, which is the case for nearly all real applications. However, associated with the development of 2D XANES comes the challenge of analyzing very large volumes of data. As an example, a single 2D XANES measurement at a synchrotron can easily produce ~106 spatially resolved XANES spectra. Conventional manual analysis of an individual XANES spectrum is no longer feasible. Here, a software package is described that has been developed for high-throughput 2D XANES analysis. A detailed description of the software as well as example applications are provided.

25 ENERGY STORAGE↗
DOE OSTI2024

Anaerobic benzene oxidation in Geotalea daltonii involves activation by methylation and is regulated by the transition state regulator AbrB

ABSTRACT Benzene is a widespread groundwater contaminant that persists under anoxic conditions. The aim of this study was to more accurately investigate anaerobic microbial degradation pathways to predict benzene fate and transport. Preliminary genomic analysis of Geotalea daltonii strain FRC-32, isolated from contaminated groundwater, revealed the presence of putative aromatic-degrading genes. G. daltonii was subsequently shown to conserve energy for growth on benzene as the sole electron donor and fumarate or nitrate as the electron acceptor. The hbs gene, encoding for 3-hydroxybenzylsuccinate synthase (Hbs), a homolog of the radical-forming, toluene-activating benzylsuccinate synthase (Bss), was upregulated during benzene oxidation in G. daltonii , while the bss gene was upregulated during toluene oxidation. Addition of benzene to the G. daltonii whole-cell lysate resulted in toluene formation, indicating that methylation of benzene was occurring. Complementation of σ 54 - (deficient) E. coli transformed with the bss operon restored its ability to grow in the presence of toluene, revealing bss to be regulated by σ 54 . Binding sites for σ 70 and the transition state regulator AbrB were identified in the promoter region of the σ 54 -encoding gene rpoN, and binding was confirmed. Induced expression of abrB during benzene and toluene degradation caused G. daltonii cultures to transition to the death phase. Our results suggested that G. daltonii can anaerobically oxidize benzene by methylation, which is regulated by σ 54 and AbrB. Our findings further indicated that the benzene, toluene, and benzoate degradation pathways converge into a single metabolic pathway, representing a uniquely efficient approach to anaerobic aromatic degradation in G. daltonii . IMPORTANCE The contamination of anaerobic subsurface environments including groundwater with toxic aromatic hydrocarbons, specifically benzene, toluene, ethylbenzene, and xylene, has become a global issue. Subsurface groundwater is largely anoxic, and further study is needed to understand the natural attenuation of these compounds. This study elucidated a metabolic pathway utilized by the bacterium Geotalea daltonii capable of anaerobically degrading the recalcitrant molecule benzene using a unique activation mechanism involving methylation. The identification of aromatic-degrading genes and AbrB as a regulator of the anaerobic benzene and toluene degradation pathways provides insights into the mechanisms employed by G. daltonii to modulate metabolic pathways as necessary to thrive in anoxic contaminated groundwater. Our findings contribute to the understanding of novel anaerobic benzene degradation pathways that could potentially be harnessed to develop improved strategies for bioremediation of groundwater contaminants.

Bullows, James E.↗
DOE OSTI2022

Effect of oxidation on the release of multiple metals from industrially polluted sediments and synchrotron-based evidence of Cu–S dynamic association

Disposal operations for industrially polluted sediments are usually accompanied by disturbance and resuspension, which can induce metal remobilization and secondary pollution. Evaluating the risk of metal release under various redox conditions is fundamental for predicting contaminant mobilization and guiding remediation measures. An abandoned oxidation pond, Yanjia Lake, China, was selected as a typical industrially polluted site. Re-suspension experiments were carried out by mixing polluted sediments with lake water under oxic or anoxic conditions, then investigating the effect of oxidation conditions on the release of multiple metals. Metal concentrations and aqueous chemistry in the overlying water were monitored. Synchrotron-based methods, including X-ray absorption near-edge structure (XANES) and extended X-ray absorption fine structure (EXAFS), were used to characterize oxidation states and coordination conditions of metals in sediments. The release of metals, including Cr, Co, Ni, Cu, Zn, Se, Mo, Sn, Cd, and Pb, was enhanced under oxic vs. anoxic conditions. The XANES analysis revealed that elevated Cr and Zn concentrations under oxic conditions likely resulted from the oxidation of Cr(III) and oxidizing dissolution of ZnS, respectively. K-edge Cu XANES, S XANES, and Cu EXAFS analyses reconstructed the Cu–S association, indicating that S-related oxidation promoted Cu release and Cu–O partly replaced Cu–S in the sediment after a 7-day oxic treatment. The release of most metals was promoted under oxic conditions, resulting from the oxidation of sulfides and metals as indicated by aqueous and synchrotron-based evidence. The risk of secondary pollution is greatly enhanced under oxic conditions, which suggests that measures should be taken to minimize the redox disturbance during sediment remediation. This information can guide the management of sediments in Yanjia Lake and other contaminated sites with similar properties.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Kβ X-ray Emission Spectra Analysis Using Bayesian Optimization

The Kβ X-ray emission spectrum of 3 d transition metals is rich with electronic and structural information due to strong exchange interactions with the valence shell of the metal, and has become crucial for understanding their spin and oxidation states. The spectrum is commonly treated using crystal-field multiplet theory, a semi-empirical theory that uses tunable parameters to control the strength of the effects present in X-ray emission spectroscopy (XES). However, determining the experimental values of these parameters remains a challenge. We present a methodology that applies Bayesian optimization to crystal-field multiplet theory to determine parameter values. The algorithm is tested on the X-ray emission spectra of a collection of Mn, Co, and Ni oxides. We are able to find optimal values for the four most impactful parameters: Slater−Condon reduction factors F dd , F pd , and G pd , and crystal field splitting 10 Dq . The algorithm produces significantly improved accuracy compared to current analysis methods, and probes interparameter dependencies by modeling the error landscape. This advancement enhances XES analysis by offering an approach of obtaining quantitative electronic structural information on 3 d transition metal valence shells, facilitating applications across various scientific fields.

Bayesian optimization↗
DOE OSTI2024

In situ characterization of metastable Pb3O5 and Pb2O3 phases during thermal decomposition of PbO2 to PbO

Nonstoichiometric lead oxides play a key role in the formation and cycling of the positive electrodes in a lead acid battery. These phases have been linked to the underutilization of the positive active material but also play a key role in the battery’s cycle life, providing inter-particle adhesion and the connection to the underlying lead grid. Similar phases have previously been identified by mass loss or color change during thermal annealing of PbO2 to PbO, suggesting that at least two intermediate PbOx phases exist. Using multiple in situ analysis techniques (powder diffraction, x-ray absorption, x-ray photoelectron spectroscopy) and ex situ nuclear magnetic resonance measurements, the structural conversion and changes in the lead oxidation states were identified during this process. Isolation of the PbOx phases enabled confirmation of Pb3O5 and Pb2O3 by diffraction and the first 207Pb NMR measurement of these intermediates.

Kinnibrugh, Tiffany L.↗
DOE OSTI2025

Engineering design of a kW-scale continuous reactor-heat exchanger for high temperature discharge of particle-based thermochemical energy storage

This study investigates the theoretical design parameters and thermal performance of a kW-scale continuous oxidation reactor for high temperature (~1000 °C) thermochemical energy storage (TCES) applications. The concept comprises a counter-current particle-based system that includes a reaction zone with a heat exchanger to extract the heat produced from the oxidation reaction. Both above and below the hot reactive volume are sensible heat recuperation zones to enable the feed and removal of particles and oxidizing gas near ambient temperature during steady state operation. Two operation types for the reaction zone are studied, a fluidized bed reactor (FBR) and a moving bed reactor (MBR). The results of the parametric analysis suggest that the MBR requires a smaller volume per kW of heat produced, achieving power densities in excess of 2500 kW/m3 compared to ~ 900 kW/m 3 in the FBR. Additionally, the MBR achieves between 0.71 and 0.99 oxidation conversions compared to between 0.23 and 0.38 conversions in the FBR with the same volumes and flowrates. However, the FBR has the potential to maintain a uniform reactor temperature which can produce heat transfer fluid (HTF) outlet temperatures as high as the reactor temperature, i.e., ~1000 °C, whereas the MBR produces variable reactor temperatures that can create overheating zones and low HTF outlet temperatures (< 800 °C) depending on the operating conditions selected. Future work should aim at understanding the coupled fluid dynamics, heat and mass transfer, and thermochemical reaction for any given combination of reactor volume and contacting patterns. Here, these studies should be complemented by experimental work on particle-gas TCES reactors.

25 ENERGY STORAGE↗
DOE OSTI2020

Enabling Stable High‐Voltage LiCoO 2 Operation by Using Synergetic Interfacial Modification Strategy

Abstract Structural and interfacial instability of the LiCoO 2 cathode under a voltage exceeding 4.5 V (vs Li/Li + ) severely hinders its practical applications for high‐energy‐density lithium batteries. Herein, a modified electrolyte with nitriles (suberonitrile or 1,3,6‐hexanetricarbonitrile) and fluoroethylene carbonate (FEC) coadditives is demonstrated to form an ultrathin and uniform interface layer on LiCoO 2 cathode under a synergetic effect. As such, LiCoO 2 /Li cells display excellent cyclability at a cutoff voltage of 4.6 V with a capacity retention over 72% after 300 cycles and 60% after 200 cycles at 30 and 55 °C, respectively, even achieving operation at a high current rate (10 C) upon 500 cycles as compared to the controls with fast‐falling capacity to zero. Furthermore, an adsorption‐coordination mechanism between nitriles and cobalt and synergetic effect of coadditives are explored by the alliance of spectroscopic analysis and theoretical calculations. The contributed lone‐pairs on the N 2p orbital of nitriles in coordination lowers the real oxidation state of Co 3+/4+ so that it decreases its catalysis on electrolytes, and the synergy from nitrile‐derived species regulates FEC to form an LiF‐containing electron‐insulated interface layer. This work shares a new insight to nitriles with the synergy of coadditives and paves a way to refine (ultra)high‐voltage LiCoO 2 cathode for high‐energy‐density energy storages.

Yang, Xuerui↗
DOE OSTI2025

MURR LEU structural and thermal hydraulics analyses: Part I – Preliminary irradiation thermo-mechanical behavior

The University of Missouri Research Reactor (MURR) is expected to be converted from highly enriched uranium (HEU, ≥ 20 wt% U-235) U-Al x dispersion fuel to low-enriched uranium (LEU, < 20 wt% U-235) with U-10Mo monolithic fuel. This work introduces high-fidelity irradiation thermo–mechanical (T-M) analysis of the MURR LEU focusing on changes in coolant channel gap thickness. Three-dimensional (3D) finite element (FE) models were developed to simulate the irradiation T-M behavior of the MURR LEU element with all 23 curved fuel plates, the two side plates, and the combs. It was shown that channel gap thickness changes were influenced not only by plate thickness variations due to fuel swelling and creep but also by the radial displacement of consecutive MURR LEU plates. Modeling the fuel element assembly captured side plate displacements, which were shown to reduce radial fuel plate displacements towards the convex side. The maximum local radial displacement in the element was predicted at the end of life (EOL) as 23.7 mil (602.0 µm) on the lateral centerline of plate 23 towards the convex side. The maximum stripe-averaged reduction in channel gap thickness, particularly relevant for thermal hydraulics (TH) safety analysis, was calculated as 15.9 mil (403.9 µm) in single-side heated channel 24 (the outermost channel). These results account for the thermal resistance from the oxide build-up on cladding surfaces which was shown to be up to 0.82 mil (20.8 µm) thick. It was demonstrated that accounting for oxide layer thermal resistance led to a 10 °C higher peak fuel temperature and a 4.4 mil (111.8 µm) greater maximum local radial displacement. The impact of the calculated channel gap thickness changes on the MURR LEU TH safety analysis is evaluated in Part II.

Irradiation thermo-mechanical analysis↗
DOE OSTI2022

Insights on the corrosion thermodynamics of chromium in molten LiF-NaF-KF eutectic salts

The thermodynamic stability of chromium in the Cr 0 , Cr 2+ , and Cr 3+ oxidation states considering various F - ion coordination compounds was investigated in molten LiF–NaF-KF (FLiNaK) eutectic salt. Potential fluoride ion activity (F - and CrF 3 - ) diagrams were constructed to predict the most stable Cr oxidation states as a function of anion activity, solvation state of chromium ions and potential at 600 °C. The Gibbs free energies of these compounds were estimated by utilizing a combined cyclic voltammetry – Nernst theory analysis approach in FLiNaK salt. To verify the constructed diagrams, X-ray diffraction was utilized after exposure of Cr at various applied potentials to determine whether compounds detected in solidified FLiNaK salts agreed with thermodynamic calculations. This work aims to identify key thermodynamic factors that are significant to chromium corrosion for molten salt nuclear reactor applications. The F - stability region spans the entire region where spontaneous corrosion of Cr occurs. Cr may be oxidized to Cr 2+ and Cr 3+ in the presence HF (due to moisture as an impurity) spontaneously except some conditions of p 1/2 H 2 /a HF etc. This situation is not changed qualitatively for various states of solvation between oxidized Cr solute in F - solvent and this aspect is substantially similar for the two cases (pair 1: Cr 0 /CrF 3 - / CrF 6 3- ; pair 2: Cr 0 /CrF 4 2- /CrF 5 2- ) considered in this work.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Digestion processes and elemental analysis of oxide and sulfide solid electrolytes

Detailed elemental analysis is essential for a successful development and optimization of material systems and synthesis methods. This is especially relevant for Li- and Na-containing compounds, found in state-of-the-art and next-generation battery systems. Their materials’ properties and thus the final device performance strongly depend on the crystal structure, the stoichiometry, and defect chemistry, e.g., influencing charge carrier concentration and activation energies for vacancy transport. However, a detailed quantitative analysis of light elements in a heavy matrix, featuring a broad range of solubilities and vapor pressures, is often difficult and associated with large uncertainties and thus neglected in favor of just reporting the stoichiometry as “weighed in.” Here, in this work, we report several approaches to digest and dissolve various oxide and sulfide-based materials, used in next-generation Li batteries, for elemental analysis via optical emission spectroscopy. These include the most common solid electrolytes Li-La-Ti–O, a perovskite material (LLTO), and Li-La-Zr-O which has garnet structure (LLZO). Additionally, a facile thermal digestion process is reported for a surrogate sulfide solid electrolyte (Na 2 S). The digestion procedures reported here are suitable for almost any laboratory environment and, when applied, will improve understanding of the synthesis-structure–property correlations needed to advanced batteries with all solid-state configurations.

Malkowski, Thomas F.↗
DOE OSTI2026

Impact of Rock Wettability and Mineralization on CO 2 Storage Efficiency in Basalt Reservoirs

Basalt formations have emerged as highly promising targets for geological CO 2 storage due to their abundance of reactive silicate minerals that can rapidly convert dissolved CO 2 into stable carbonate minerals. The efficiency of CO 2 trapping in basalts, however, depends not only on their geochemical reactivity but also on reservoir wettability, which governs how CO 2 partitions among structural, residual, solubility, and mineral trapping mechanisms. However, wettability and mineral kinetics have largely been examined separately, wettability for plume migration and kinetics in terms of mineralization, leaving their coupled impact unquantified. Here, we systematically integrate th ese processes in a reservoir-scale reactive transport model to quantify the impact of three distinct wettability conditions (water-wet, mixed-wet, and CO 2 -wet) on plume migration, mineral precipitation, pore-scale blockage, and long-term immobilization. Results show that under ideal conditions (no mineralization), water-wet systems exhibited plume aspect ratios up to 28% higher than CO 2 -wet systems and promoted at least 60% greater residual trapping. When mineralization was incorporated, mineral trapping accounted for 57%, 53%, and 46% of the total immobilized CO 2 in water-wet, mixed-wet, and CO 2 -wet systems, respectively. Dissolved CO 2 contributed 43-46%, while residual trapping remained below 5%, and mobile CO 2 was substantially reduced due to mineralization, demonstrating that as the system becomes more water-wet, CO 2 is more effectively converted into stable carbonate minerals, although extensive mineral precipitation may lead to pore clogging. A global Sobol-Morris sensitivity analysis further reveals that the kinetic parameters of reactive minerals are the most influential factor, followed by wettability, while salinity has only a minor influence. Furthermore, these findings highlight that wettability is not merely a flow property but a fundamental control on CO 2 mineralization in basalts, with direct implications for site selection for storage projects.

Basalts↗
DOE OSTI2024

Selenium interaction with iron minerals: Quantitative comparison of sorption and coprecipitation impacts on mobility

Given the significance of selenium (Se) as a micronutrient, the radioactive nature of some of its isotopes, and its affinity to iron (Fe) minerals, extensive research has been conducted on the sorption mechanisms between Se and these minerals. Here, in this study, we employ sorption data sourced from the L-SCIE database and coprecipitation data from available literature to achieve the following objectives: i) establish coherence between adsorption and coprecipitation processes, ii) quantitatively evaluate the importance of these processes in nuclear waste repository science, and iii) propose a forward-looking approach for integrating coprecipitation into reactive transport models. Our findings indicate that a correlation between Se adsorption and coprecipitation can be established using the λ formalism. The comparable log(λ Se(IV) /λ Se(VI) ) ratios derived from adsorption and coprecipitation experiments suggest that these processes can be quantitatively compared and evaluated using our numerical approach. Across all iron oxide phases examined, coprecipitation leads to significantly greater immobilization of Se compared to adsorption. Specifically, for hydrous ferric oxide, hematite, and goethite, coprecipitation is predicted to result in 100–1000 times more Se immobilization compared to adsorption, irrespective of the Se oxidation state (Se(IV) or Se(VI)); notably stronger immobilization potential via coprecipitation was observed for magnetite. The modeling approach and quantitative analysis presented herein clearly highlight the importance of including coprecipitation processes when simulating Se (and other elements) transport, particularly under conditions where mineral compositions are transient or evolving with time. Neglecting coprecipitation in models is likely to lead to significant overestimates of migration.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2022

As–Se Pentagonal Linkers to Induce Chirality and Polarity in Mixed-Valent Fe–Se Tetrahedral Chains Resulting in Hidden Magnetic Ordering

A novel mixed-valent hybrid chiral and polar compound, Fe 7 As 3 Se 12 (en) 6 (H 2 O), has been synthesized by a single-step solvothermal method. The crystal structure consists of 1D [Fe 5 Se 9 ] chains connected via [As 3 Se 2 ]–Se pentagonal linkers and charge-balancing interstitial [Fe(en) 3 ] 2+ complexes (en = ethylenediamine). Neutron powder diffraction verified that interstitial water molecules participate in the crystal packing. Magnetic polarizability of the produced compound was confirmed by X-ray magnetic circular dichroism (XMCD) spectroscopy. X-ray absorption spectroscopy (XAS) and 57 Fe Mössbauer spectroscopy showed the presence of mixed-valent Fe 2+ /Fe 3+ in the Fe–Se chains. Magnetic susceptibility measurements reveal strong antiferromagnetic nearest neighbor interactions within the chains with no apparent magnetic ordering down to 2 K. Hidden short-range magnetic ordering below 70 K was found by 57 Fe Mössbauer spectroscopy, showing that a fraction of the Fe 3+ /Fe 2+ in the chains are magnetically ordered. Nevertheless, complete magnetic ordering is not achieved even at 6 K. Analysis of XAS spectra demonstrates that the fraction of Fe 3+ in the chain increases with decreasing temperature. Computational analysis points out several competing ferrimagnetic ordered models within a single chain. Here, this competition, together with variation in the Fe oxidation state and additional weak intrachain interactions, is hypothesized to prevent long-range magnetic ordering.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Understanding of Active Sites and Interconversion of Pd and PdO during CH 4 Oxidation

Pd-based catalysts are widely used in the oxidation of CH 4 and have a significant impact on global warming. However, understanding their active sites remains controversial, because interconversion between Pd and PdO occurs consecutively during the reaction. Understanding the intrinsic active sites under reaction conditions is critical for developing highly active and selective catalysts. In this study, we demonstrated that partially oxidized palladium (PdO x ) on the surface plays an important role for CH 4 oxidation. Regardless of whether the initial state of Pd corresponds to oxides or metallic clusters, the topmost surface is PdO x , which is formed during CH4 oxidation. A quantitative analysis using CO titration, diffuse reflectance infrared Fourier-transform spectroscopy, X-ray diffraction, and scanning transmission electron microscopy demonstrated that a surface PdO layer was formed on top of the metallic Pd clusters during the CH 4 oxidation reaction. Furthermore, the time-on-stream test of CH 4 oxidation revealed that the presence of the PdO layer on top of the metallic Pd clusters improves the catalytic activity. Our periodic density functional theory (DFT) calculations with a PdO x slab and nanoparticle models aided the elucidation of the structure of the experimental PdO particles, as well as the experimental C-O bands. The DFT results also revealed the formation of a PdO layer on the metallic Pd clusters. This study helps achieve a fundamental understanding of the active sites of Pd and PdO for CH 4 oxidation and provides insights into the development of active and durable Pd-based catalysts through molecular-level design.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Rate expressions and kinetic parameters for metal ferrites in relation to applications of fossil fuel conversion to hydrogen: Part 1 of 2

Here, the goal of the present work was to provide the necessary reaction emulation information to enable detailed process simulation of a chemical looping H 2 production system from fossil fuels using CaFe 2 O 4 . This specifically pertained to the necessary kinetic data, reaction model development, and model rate parameters required for reaction emulation in both reducing and oxidizing environments. A logical methodology was defined, which included discretization of the reaction network, establishing a core model for reaction emulation that could be adapted based on the system phenomena, and development of a rate parameter regression tool designed around the core model. An extensive array of data sets was acquired by which parametric regressions were performed. The work presented and tabulated a comprehensive set of rate parameters for the reduction and oxidation reactions of CaFe 2 O 4 and descendent phases of Ca 2 Fe 2 O 5 , FeO, Fe 3 O 4 , Fe, and CaO to emulate reaction behavior in a looping-based process environment. This included direct reduction using CH 4 , H 2 , and CO, and direct oxidation reactions with steam, CO 2 and O 2 . Dynamic equilibrium was quantified for reactions that could utilize H 2 O and CO 2 as soft oxidants to re-saturate lattice oxygen in the depleted structure/phases. The kinetics associated with the oxidative mechanisms with the soft oxidants were quantified and compared to those of the reducing counterparts. The analysis provided critical insight to emulate reactions for a process that seeks to use natural gas (NG) or other fossil fuels as a direct reductant for the end goal of H 2 production.

calcium ferrite oxygen carriers↗
DOE OSTI2021

New Mechanistic and Reaction Pathway Insights for Oxidative Coupling of Methane (OCM) over Supported Na 2 WO 4 /SiO 2 Catalysts

Abstract The complex structure of the catalytic active phase, and surface‐gas reaction networks have hindered understanding of the oxidative coupling of methane (OCM) reaction mechanism by supported Na 2 WO 4 /SiO 2 catalysts. The present study demonstrates, with the aid of in situ Raman spectroscopy and chemical probe (H 2 ‐TPR, TAP and steady‐state kinetics) experiments, that the long speculated crystalline Na 2 WO 4 active phase is unstable and melts under OCM reaction conditions, partially transforming to thermally stable surface Na‐WO x sites. Kinetic analysis via temporal analysis of products (TAP) and steady‐state OCM reaction studies demonstrate that ( i ) surface Na‐WO x sites are responsible for selectively activating CH 4 to C 2 H x and over‐oxidizing CH y to CO and ( ii ) molten Na 2 WO 4 phase is mainly responsible for over‐oxidation of CH 4 to CO 2 and also assists in oxidative dehydrogenation of C 2 H 6 to C 2 H 4 . These new insights reveal the nature of catalytic active sites and resolve the OCM reaction mechanism over supported Na 2 WO 4 /SiO 2 catalysts.

Sourav, Sagar↗
DOE OSTI2021

New Mechanistic and Reaction Pathway Insights for Oxidative Coupling of Methane (OCM) over Supported Na 2 WO 4 /SiO 2 Catalysts

Abstract The complex structure of the catalytic active phase, and surface‐gas reaction networks have hindered understanding of the oxidative coupling of methane (OCM) reaction mechanism by supported Na 2 WO 4 /SiO 2 catalysts. The present study demonstrates, with the aid of in situ Raman spectroscopy and chemical probe (H 2 ‐TPR, TAP and steady‐state kinetics) experiments, that the long speculated crystalline Na 2 WO 4 active phase is unstable and melts under OCM reaction conditions, partially transforming to thermally stable surface Na‐WO x sites. Kinetic analysis via temporal analysis of products (TAP) and steady‐state OCM reaction studies demonstrate that ( i ) surface Na‐WO x sites are responsible for selectively activating CH 4 to C 2 H x and over‐oxidizing CH y to CO and ( ii ) molten Na 2 WO 4 phase is mainly responsible for over‐oxidation of CH 4 to CO 2 and also assists in oxidative dehydrogenation of C 2 H 6 to C 2 H 4 . These new insights reveal the nature of catalytic active sites and resolve the OCM reaction mechanism over supported Na 2 WO 4 /SiO 2 catalysts.

Sourav, Sagar↗