Search NASA⌕ Search

SEARCH · Search NASA

Results for “parameter studies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS2002

End Effects and Load Diffusion in Composite Structures

The research carried out here builds on our previous NASA supported research on the general topic of edge effects and load diffusion in composite structures. Further fundamental solid mechanics studies were carried out to provide a basis for assessing the complicated modeling necessary for large scale structures used by NASA. An understanding of the fundamental mechanisms of load diffusion in composite subcomponents is essential in developing primary composite structures. Specific problems recently considered were focussed on end effects in sandwich structures and for functionally graded materials. Both linear and nonlinear (geometric and material) problems have been addressed. Our goal is the development of readily applicable design formulas for the decay lengths in terms of non-dimensional material and geometric parameters. Analytical models of load diffusion behavior are extremely valuable in building an intuitive base for developing refined modeling strategies and assessing results from finite element analyses. The decay behavior of stresses and other field quantities provides a significant aid towards this process. The analysis is also amenable to parameter study with a large parameter space and should be useful in structural tailoring studies.

Horgan, Cornelius O.↗
NASA NTRS2001

Neuroimmunologic aspects of sleep and sleep loss

The complex and intimate interactions between the sleep and immune systems have been the focus of study for several years. Immune factors, particularly the interleukins, regulate sleep and in turn are altered by sleep and sleep deprivation. The sleep-wake cycle likewise regulates normal functioning of the immune system. Although a large number of studies have focused on the relationship between the immune system and sleep, relatively few studies have examined the effects of sleep deprivation on immune parameters. Studies of sleep deprivation's effects are important for several reasons. First, in the 21st century, various societal pressures require humans to work longer and sleep less. Sleep deprivation is becoming an occupational hazard in many industries. Second, to garner a greater understanding of the regulatory effects of sleep on the immune system, one must understand the consequences of sleep deprivation on the immune system. Significant detrimental effects on immune functioning can be seen after a few days of total sleep deprivation or even several days of partial sleep deprivation. Interestingly, not all of the changes in immune physiology that occur as a result of sleep deprivation appear to be negative. Numerous medical disorders involving the immune system are associated with changes in the sleep-wake physiology--either being caused by sleep dysfunction or being exacerbated by sleep disruption. These disorders include infectious diseases, fibromyalgia, cancers, and major depressive disorder. In this article, we will describe the relationships between sleep physiology and the immune system, in states of health and disease. Interspersed will be proposals for future research that may illuminate the clinical relevance of the relationships between sleeping, sleep loss and immune function in humans. Copyright 2001 by W.B. Saunders Company.

NASA Discipline Space Human Factors↗
NASA NTRS2007

A Parametric Geometry Computational Fluid Dynamics (CFD) Study Utilizing Design of Experiments (DOE)

Design of Experiments (DOE) was applied to the LAS geometric parameter study to efficiently identify and rank primary contributors to integrated drag over the vehicles ascent trajectory in an order of magnitude fewer CFD configurations thereby reducing computational resources and solution time. SME s were able to gain a better understanding on the underlying flowphysics of different geometric parameter configurations through the identification of interaction effects. An interaction effect, which describes how the effect of one factor changes with respect to the levels of other factors, is often the key to product optimization. A DOE approach emphasizes a sequential approach to learning through successive experimentation to continuously build on previous knowledge. These studies represent a starting point for expanded experimental activities that will eventually cover the entire design space of the vehicle and flight trajectory.

Rhew, Ray D.↗
NASA NTRS1997

Model For Dense Molecular Cloud Cores

We present a detailed theoretical model for the thermal balance, chemistry, and radiative transfer within quiescent dense molecular cloud cores that contain a central protostar. In the interior of such cores, we expect the dust and gas temperatures to be well coupled, while in the outer regions CO rotational emissions dominate the gas cooling and the predicted gas temperature lies significantly below the dust temperature. Large spatial variations in the gas temperature are expected to affect the gas phase chemistry dramatically; in particular, the predicted water abundance varies by more than a factor of 1000 within cloud cores that contain luminous protostars. Based upon our predictions for the thermal and chemical structure of cloud cores, we have constructed self-consistent radiative transfer models to compute the line strengths and line profiles for transitions of (12)CO, (13)CO, C(18)O, ortho- and para-H2(16)O, ortho- and para-H2(18)O, and O I. We carried out a general parameter study to determine the dependence of the model predictions upon the parameters assumed for the source. We expect many of the far-infrared and submillimeter rotational transitions of water to be detectable either in emission or absorption with the use of the Infrared Space Observatory (ISO) and the Submillimeter Wave Astronomy Satellite. Quiescent, radiatively heated hot cores are expected to show low-gain maser emission in the 183 GHz 3(sub 13)-2(sub 20) water line, such as has been observed toward several hot core regions using ground-based telescopes. We predict the (3)P(sub l) - (3)P(sub 2) fine-structure transition of atomic oxygen near 63 micron to be in strong absorption against the continuum for many sources. Our model can also account successfully for recent ISO observations of absorption in rovibrational transitions of water toward the source AFGL 2591.

Doty, Steven D.↗
NASA NTRS1982

Response Characteristics of a Linear Rotorcraft Vibration Model

A fully coupled vibration model, consisting of a rotor with only flapping degrees of freedom plus pylon and fuselage pitching motion, was used in a parametric study undertaken to investigate the response characteristics of a simplified helicopter. Among the parameters studied were uncoupled body frequency, blade stiffness, hinge offset, advance ratio, and mast height. Results from the harmonic balance solution of the equations of motion show how each of these quantities affects the response of the model. The results also indicate that there is a potential for reducing vibration response through the judicious definition of the design parameters.

Kunz, Donald L.↗
NASA NTRS1979

Novel duplex vapor-electrochemical method for silicon solar cells

Optimization studies were carried out for the SiF4-Na reaction with solid Na feed. The goals of the study were the consistent production of high purity reaction products and the gathering of relevant information needed to scale-up the reactor. Parameters studied include: (1) effect of surface to volume ratio of Na slices on the extent of reaction; (2) effect of Na surface oxidation on the extent of reaction; (3) effect of external heating on the extent of SiF4-Na reaction; (4) effect of Na slice addition rate on extent of the reaction; and (5) SiF4-Na reaction - high pressure experiments. An investigation was also made of the possible role played by NaF as a fluxing agent during the separation of silicon by melting of the reaction product (Si + NaF) mixture. Since silicon can be produced by the thermite reaction between Na2SiF6 and Na, studies were initiated to gather information on parameters which control the efficiency of the thermite reaction.

Nanis, L.↗
NASA NTRS2013

Vertical Settling and Radial Segregation of Large Dust Grains in the Circumstellar Disk of the Butterfly Star

Circumstellar disks are considered as the environment for the formation of planets. The growth of dust grains in these disks is the first step in the core accretion-gas capture planet formation scenario. Indicators as well as evidence of disk evolution can be traced in spatially resolved images and the spectral energy distribution (SED) of these objects. Aims. We aim at developing a model for the dust phase of the edge-on orientated circumstellar disk of the Butterfly Star which allows one to fit observed multi-wavelength images as well as the SED simultaneously. Our model is based on spatially resolved high angular resolution observations at 1.3 mm, 894 μm, 2.07 μm, 1.87 μm, 1.60 μm and 1.13 μm as well as an extensively covered SED ranging from 12 μm to 2.7 mm, including a detailed spectrum obtained with the Spitzer Space Telescope in the range from 12 μm to 38 μm. A parameter study based on a grid search method, involving the detailed analysis of every parameter, was performed to constrain the disk parameters and find the best-fit model for the independent observations. The individual observations were modeled simultaneously, using our continuum radiative transfer code MC3D. We derived a model that is capable of reproducing all of the observations of the disk at the same time. We find quantitative evidence for grain growth up to ~100 μm sized particles, vertical settling of larger dust grains toward the disk midplane, and radial segregation of the latter toward the central star. Our results are consistent with current theoretical models for the evolution of circumstellar disks and the early stages of planet formation.

Radiative transfer↗
NASA NTRS1986

Simulation studies for surfaces and materials strength

During this reporting period three investigations were carried out. The first area of research concerned the analysis of the structure-energy relationship in small clusters. This study is very closely related to the improvement of the potential energy functions which are suitable and simple enough to be used in atomistic simulation studies. Parameters obtained from ab initio calculations for dimers and trimers of Al were used to estimate energetics and global minimum energy structures of clusters continuing up to 15 Al atoms. The second research topic addressed modeling of the collision process for atoms impinging on surfaces. In this simulation study qualitative aspects of the O atom collision with a graphite surface were analyzed. Four different O/graphite systems were considered and the aftermath of the impact was analyzed. The final area of investigation was related to the simulation of thin amorphous Si films on crystalline Si substrates. Parameters obtained in an earlier study were used to model an exposed amorphous Si surface and an a-Si/c-Si interface. Structural details for various film thicknesses were investigated at an atomistic level.

Halicioglu, T.↗
NASA NTRS1994

Control of unsteady separated flow associated with the dynamic stall of airfoils

A unique active flow-control device is proposed for the control of unsteady separated flow associated with the dynamic stall of airfoils. The device is an adaptive-geometry leading-edge which will allow controlled, dynamic modification of the leading-edge profile of an airfoil while the airfoil is executing an angle-of-attack pitch-up maneuver. A carbon-fiber composite skin has been bench tested, and a wind tunnel model is under construction. A baseline parameter study of compressible dynamic stall was performed for flow over an NACA 0012 airfoil. Parameters included Mach number, pitch rate, pitch history, and boundary layer tripping. Dynamic stall data were recorded via point-diffraction interferometry and the interferograms were analyzed with in-house developed image processing software. A new high-speed phase-locked photographic image recording system was developed for real-time documentation of dynamic stall.

Wilder, M. C.↗
NASA NTRS1974

Industrial laser welding evaluation study

High power laser welding was evaluated for fabricating space vehicle boosters. This evaluation was made for 1/4 in. and 1/2 in. aluminum (2219) and 1/4 in. and 1/2 in. D6AC steel. The Avco HPL 10 kW industrial laser was used to perform the evaluation. The objective has been achieved through the completion of the following technical tasks: (1) parameter study to optimize welding and material parameters; (2) preparation of welded panels for MSFC evaluation; and (3) demonstration of the repeatability of laser welding equipment. In addition, the design concept for a laser welding system capable of welding large space vehicle boosters has been developed.

Hella, R.↗
NASA NTRS2020

Unstructured Grid Development for the Space Launch System Liftoff and Transition Lineloads Computational Analysis

Production of aerodynamic lineloads databases for the Space Launch System (SLS) vehicle at Liftoff and Transition (LOT) conditions has required the development of a Computational Fluid Dynamics (CFD) workflow capable of producing high-quality solutions for this unique phase of flight. Aerodynamic considerations included a wide range of flow angles (from 0°up to 90°total angle of attack), resulting leeside separation, and interaction effects between the three bodies of the integrated SLS vehicle, as well as the nearby launch tower. Computational mesh development for similar problems at the NASA Langley Research Center (such as for the Constellation/Ares launch vehicles) has primarily relied on in-house tools such as VGRID/POSTGRID, with grids designed for NASA-developed and maintained flow solvers such as USM3D and FUN3D. The workflow for such problems has evolved over the development of the various SLS configurations to incorporate new tools such as the Heldenpatch/Heldenmesh grid generator (Helden Aerospace) and CREATE-AV Kestrel (US Department of Defense) flow solver. This paper describes efforts to benchmark a grid generation approach for LOT problems using Heldenpatch/Heldenmesh and Kestrel, verified against prior best practices from VGRID/POSTGRID. Parameters studied include surface grid density, first-layer viscous cell height, and volume grid growth rate parameters. Resulting solutions are compared based on total force and moment values, sectional line loads, and surface pressures, all validated against existing wind tunnel aerodynamic databases where available for the SLS Block 1B Cargo configuration.

Space launch systems↗
NASA NTRS1993

Frequency distributions and correlations of solar X-ray flare parameters

Frequency distributions of flare parameters are determined from over 12,000 solar flares. The flare duration, the peak counting rate, the peak hard X-ray flux, the total energy in electrons, and the peak energy flux in electrons are among the parameters studied. Linear regression fits, as well as the slopes of the frequency distributions, are used to determine the correlations between these parameters. The relationship between the variations of the frequency distributions and the solar activity cycle is also investigated. Theoretical models for the frequency distribution of flare parameters are dependent on the probability of flaring and the temporal evolution of the flare energy build-up. The results of this study are consistent with stochastic flaring and exponential energy build-up. The average build-up time constant is found to be 0.5 times the mean time between flares.

Crosby, Norma B.↗
NASA NTRS2003

Analysis of Combustion Systems

As part of the NASA High-Speed Research Program, low emission combustors are being studied and demonstrated. One combustor concept that is currently being studied and evaluated is the Rich burn-Quick mix-Lean burn (RQL) combustor. The quick-mix zone of the RQL combustor is extremely important in reducing NO(x) emissions; rapid mixing of the bypass airflow with rich-born effluent is essential. The basic challenge can be described as rapid jet-in-crossflow mixing. Although jet-in-crossflow mixing is not new, this RQL application is unique in that the jet-to-mainstream mass-flow ratios are higher than studied previously (approx. 3 in RQL applications versus approx. 0.5 in dilution zone studies), plus the emphasis is on reducing NO(x) emissions (i.e. good mixing might not necessarily produce low emissions). This five-years project focused on identifying quick-mix method that would reduce NO(x) emissions in RQL combustor. The work included study of mixing concepts, and the development of design methodology. Three dimension CFD analysis was the primary tool used in assessing concept and developing design methodology for low emission. Isothermal and reacting CFD calculations were performed on cylindrical, rectangular, and annular generic geometries. Systematic parameters studies were performed to isolate key design parameters and their influence on mixing and emissions.

Daniel B. Bain↗
NASA NTRS2022

Impact of 3D Structure on Magnetic Reconnection

Results from 2.5D and 3D studies of the onset and development of the tearing instability are presented, using high fidelity resistive MHD simulations. A limited parameter study of the strength of the reconnecting field (or shear angle) was performed. An initially simple 1D equilibrium was used, consisting of a modified force-free current sheet, with periodic boundary conditions in all directions. In all cases, the linear and nonlinear evolution led to a primary current sheet between two large flux ropes. The global reconnection rate during this later stage was analyzed in all simulations. It was found that in 2.5D the primary current sheet fragmented owing to plasmoids, and as expected, the global reconnection rate, calculated using multiple methods, increases with the strength of the reconnecting field owing to a stronger Alfvén speed. In 3D, the presence of interacting oblique modes of the tearing instability complicates the simple 2.5D picture, entangling the magnetic field of the inflow and introducing a negative effect on the reconnection rate. The two competing effects of stronger Alfvén speed and entangling, which both increase with the strength of the reconnecting field, resulted in a decrease in the reconnection rate with increasing reconnecting field. For all simulations, the 3D rates were less than in 2.5D but suggest that as one goes to weak reconnecting field (or strong guide field) the system becomes more 2.5D-like and the 2.5D and 3D rates converge. These results have relevance to situations like nanoflare heating and flare current sheets in the corona.

Lars K S Daldorff↗
NASA NTRS2022

The Role of Reconnection in the Onset of Solar Eruptions

Solar eruptive events such as coronal mass ejections and eruptive flares are frequently associated with the emergence of magnetic flux from the convection zone into the corona. We use three-dimensional magnetohydrodynamic numerical simulations to study the interaction of coronal magnetic fields with emerging flux and determine the conditions that lead to eruptive activity. A simple parameter study is performed, varying the relative angle between emerging magnetic flux and a preexisting coronal dipole field. We find that in all cases the emergence results in a sheared magnetic arcade that transitions to a twisted coronal flux rope via low-lying magnetic reconnection. This structure, however, is constrained by its own outer field and so is noneruptive in the absence of reconnection with the overlying coronal field. The amount of this overlying reconnection is determined by the relative angle between the emerged and preexisting fields. The reconnection between emerging and preexisting fields is necessary to generate sufficient expansion of the emerging structure so that flare-like reconnection below the coronal flux rope becomes strong enough to trigger its release. Our results imply that the relative angle is the key parameter in determining whether the resultant active regions exhibit eruptive behavior and is thus a potentially useful candidate for predicting eruptions in newly emerging active regions. More generally, our results demonstrate that the detailed interaction between the convection zone/photosphere and the corona must be calculated self-consistently in order to model solar eruptions accurately.

James E Leake↗
NASA NTRS1997

12 Inch Fan Acoustic Research

There were three general purposes of this research; first, to investigate fundamental fan acoustic processes, second, to produce high quality data for the validation of aeroacoustic codes and, third, to investigate candidate noise control concepts. These were all to be investigated using the NASA built and supplied 12 inch fan which is a 0.1 scale model of a modem ultra high bypass fan. NASA also supplied the test environments, wind tunnel entries in the 14 by 22 Foot Subsonic Wind Tunnel and the Anechoic Noise Research Facility. To fulfill the purposes of the grant, investigations were performed in several general topics. In the area of fundamental fan studies, some of the topics involved were azimuthal directivity and tip clearance effects. In the area of high quality validation data significant parameter studies in the wind tunnel tests were performed. And in the area of noise control concepts, heated air injection was studied. The principal investigator performed the work on this grant by leading the concept development, design, planning, data analysis and reporting of the areas studied. The final report for this grant consists of a listing, which follows, of all reports, presentations, and publications that were made for the work done during the performance period.

Thomas, R. H.↗
NASA NTRS1989

Failure modes and damage accumulation in laminated composites with free edges

The influence of fiber orientation, stacking sequence, material properties and edge effects on the accumulation of damage and modes of failure in angle-ply and quasi-isotropic composite laminates are studied. Experimental results are presented for graphite-epoxy and graphite-polyimide coupons subjected to tensile load. It is shown that all the parameters studied can have a significant influence on the behavior of the composite.

Herakovich, Carl T.↗