Search NASA⌕ Search

SEARCH · Search NASA

Results for “parameter studies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

EVOLUTIONARY MODELS OF SUPER-EARTHS AND MINI-NEPTUNES INCORPORATING COOLING AND MASS LOSS

We construct models of the structural evolution of super-Earth- and mini-Neptune-type exoplanets with H{sub 2}–He envelopes, incorporating radiative cooling and XUV-driven mass loss. We conduct a parameter study of these models, focusing on initial mass, radius, and envelope mass fractions, as well as orbital distance, metallicity, and the specific prescription for mass loss. From these calculations, we investigate how the observed masses and radii of exoplanets today relate to the distribution of their initial conditions. Orbital distance and the initial envelope mass fraction are the most important factors determining planetary evolution, particularly radius evolution. Initial mass also becomes important below a “turnoff mass,” which varies with orbital distance, with mass–radius curves being approximately flat for higher masses. Initial radius is the least important parameter we study, with very little difference between the hot start and cold start limits after an age of 100 Myr. Model sets with no mass loss fail to produce results consistent with observations, but a plausible range of mass-loss scenarios is allowed. In addition, we present scenarios for the formation of the Kepler-11 planets. Our best fit to observations of Kepler-11b and Kepler-11c involves formation beyond the snow line, after which they moved inward, circularized, and underwent a reduced degree of mass loss.

79 ASTRONOMY AND ASTROPHYSICS↗

The Virtual Blast Furnace - An Integrated High Performance Computing Modeling, Simulation, and Visualization Capability for Steel Manufacturing (Final Report)

Many manufacturing industries require substantial capital and utilize energy intensive processes that involve complex phenomena. One example of such an industry is the steel industry, which is the fourth largest energy consuming industry in the U.S. By harnessing the power of High-Performance Computing (HPC) to enhance current simulation and visualization methods in the steel industry, it should be possible to increase resolution and/or decrease time of these methods by a factor of 1000. In this way, information can be obtained in a time frame that is useful for making business and engineering decisions, optimizing manufacturing processes and, ultimately, improving the completeness of U.S. industries. For example, if coke usage in blast furnaces were optimized such that the average coke rate was reduced from 797 lb/net tonne of hot metal (NTHM) to 604 lb/NTHM, costs could be reduced by $894 million/year. Additionally, members of the steel industry need the flexibility to efficiently operate blast furnaces at a range of production rates in order to meet fluctuating market demands. Large scale parameter studies can be utilized to discover workable operating parameters at a range of production rates.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Tuned to Terrible: A Study of Parallel Particle Advection State of the Practice

The algorithms foundational to visualization are central to the production visualization tools running at computing centers around the world and consume tremendous amounts of finite, limited resources. We believe that understanding the performance characteristics of these algorithms is critical in being good stewards of computational centers' resources. In this paper, we report initial studies on one such foundational algorithm: parallel particle advection. We have performed an extensive parameter study of the de facto standard algorithm that is commonly used in parallel production visualization tools as well as for in situ visualization environments. Our study has shown that the default parameters used in this algorithm lead to generally poor results, and identify settings that optimized performance on the system in our parameter sweep.

97 MATHEMATICS AND COMPUTING↗

An Undulator Based Polarized Positron Source for CLIC

A viable positron source scheme is proposed that uses circularly polarized gamma rays generated from the main 250 GeV electron beam. The beam passes through a helical superconducting undulator with a magnetic field of {approx} 1 Tesla and a period of 1.15 cm. The gamma-rays produced in the undulator in the energy range between {approx} 3 MeV - 100 MeV will be directed to a titanium target and produce polarized positrons. The positrons are then captured, accelerated and transported to a Pre-Damping Ring (PDR). Detailed parameter studies of this scheme including positron yield, and undulator parameter dependence are presented. Effects on the 250 GeV CLIC main beam, including emittance growth and energy loss from the beam passing through the undulator are also discussed.

43 PARTICLE ACCELERATORS↗

Application of sensitivity analysis in DYMOND/Dakota to fuel cycle transition scenarios

The ability to perform sensitivity analysis has been enabled for the nuclear fuel cycle simulator DYMOND through its coupling with the design and analysis toolkit Dakota. To test and demonstrate these new capabilities, a transition scenario and multi-parameter study were devised. The transition scenario represents a partial transition from the US nuclear fleet to a closed fuel cycle with small modular LWRs and fast reactors fueled by reprocessed used nuclear fuel. Four uncertain parameters in this transition were studied – start date of reprocessing, total reprocessing capacity, the nuclear energy demand growth, and the rate at which the fast reactors are deployed – with respect to their impact on four response metrics. The responses – total natural uranium consumed, maximum annual enrichment capacity required, total disposed mass, and total cost of the nuclear fuel cycle – were chosen based on measures known to be of interest in transition scenarios and to be significantly impacted by the varying parameters. Furthermore, analysis of this study was performed both from the direct sampling and through surrogate models developed in Dakota to calculate the global sensitivity measures Sobol’ indices. This example application of this new capability showed that the most consequential parameter to most metrics was the share of new build capacity that is fast reactors. However, for the cost metric, the scaling factor of the energy demand growth was significant and had synergistic behavior with the fast reactor new build share.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

THE ROLE OF CORE MASS IN CONTROLLING EVAPORATION: THE KEPLER RADIUS DISTRIBUTION AND THE KEPLER-36 DENSITY DICHOTOMY

We use models of coupled thermal evolution and photo-evaporative mass loss to understand the formation and evolution of the Kepler-36 system. We show that the large contrast in mean planetary density observed by Carter et al. can be explained as a natural consequence of photo-evaporation from planets that formed with similar initial compositions. However, rather than being due to differences in XUV irradiation between the planets, we find that this contrast is due to the difference in the masses of the planets' rock/iron cores and the impact that this has on mass-loss evolution. We explore in detail how our coupled models depend on irradiation, mass, age, composition, and the efficiency of mass loss. Based on fits to large numbers of coupled evolution and mass-loss runs, we provide analytic fits to understand threshold XUV fluxes for significant atmospheric loss, as a function of core mass and mass-loss efficiency. Finally we discuss these results in the context of recent studies of the radius distribution of Kepler candidates. Using our parameter study, we make testable predictions for the frequency of sub-Neptune-sized planets. We show that 1.8-4.0 R{sub ⊕} planets should become significantly less common on orbits within 10 days and discuss the possibility of a narrow 'occurrence valley' in the radius-flux distribution. Moreover, we describe how photo-evaporation provides a natural explanation for the recent observations of Ciardi et al. that inner planets are preferentially smaller within the systems.

79 ASTRONOMY AND ASTROPHYSICS↗

Analyzing and Tracking Burning Structures in Lean Premixed Hydrogen Flames

This paper presents topology-based methods to robustly extract, analyze, and track features defined as subsets of isosurfaces. First, we demonstrate how features identified by thresholding isosurfaces can be defined in terms of the Morse complex. Second, we present a specialized hierarchy that encodes the feature segmentation independent of the threshold while still providing a flexible multi-resolution representation. Third, for a given parameter selection we create detailed tracking graphs representing the complete evolution of all features in a combustion simulation over several hundred time steps. Finally, we discuss a user interface that correlates the tracking information with interactive rendering of the segmented isosurfaces enabling an in-depth analysis of the temporal behavior. We demonstrate our approach by analyzing three numerical simulations of lean hydrogen flames subject to different levels of turbulence. Due to their unstable nature, lean flames burn in cells separated by locally extinguished regions. The number, area, and evolution over time of these cells provide important insights into the impact of turbulence on the combustion process. Utilizing the hierarchy we can perform an extensive parameter study without re-processing the data for each set of parameters. The resulting statistics enable scientist to select appropriate parameters and provide insight into the sensitivity of the results wrt. to the choice of parameters. Our method allows for the first time to quantitatively correlate the turbulence of the burning process with the distribution of burning regions, properly segmented and selected. In particular, our analysis shows that counter-intuitively stronger turbulence leads to larger cell structures, which burn more intensely than expected. This behavior suggests that flames could be stabilized under much leaner conditions than previously anticipated.

97 MATHEMATICS AND COMPUTING↗

A Parametric Study of the SASI Comparing General Relativistic and Nonrelativistic Treatments

We present numerical results from a parameter study of the standing accretion shock instability (SASI), investigating the impact of general relativity (GR) on the dynamics. Using GR hydrodynamics with GR gravity, and nonrelativistic (NR) hydrodynamics with Newtonian gravity, in an idealized model setting, we vary the initial radius of the shock, and by varying its mass and radius in concert, the proto-neutron star compactness. We investigate four compactnesses expected in a post-bounce core-collapse supernova (CCSN). We find that GR leads to a longer SASI oscillation period, with ratios between the GR and NR cases as large as 1.29 for the highest-compactness suite. We also find that GR leads to a slower SASI growth rate, with ratios between the GR and NR cases as low as 0.47 for the highest-compactness suite. We discuss implications of our results for CCSN simulations.

79 ASTRONOMY AND ASTROPHYSICS↗

Fundamentals of Mercury Oxidation in Flue Gas

The objective of this project was to understand the importance of and the contribution of gas-phase and solid-phase coal constituents in the mercury oxidation reactions. The project involved both experimental and modeling efforts. The team was comprised of the University of Utah, Reaction Engineering International, and the University of Connecticut. The objective was to determine the experimental parameters of importance in the homogeneous and heterogeneous oxidation reactions; validate models; and, improve existing models. Parameters studied include HCl, NO{sub x}, and SO{sub 2} concentrations, ash constituents, and temperature. The results suggested that homogeneous mercury oxidation is below 10% which is not consistent with previous data of others and work which was completed early in this research program. Previous data showed oxidation above 10% and up to 100%. However, the previous data are suspect due to apparent oxidation occurring within the sampling system where hypochlorite ion forms in the KCl impinger, which in turn oxidized mercury. Initial tests with entrained iron oxide particles injected into a flame reactor suggest that iron present on fly ash particle surfaces can promote heterogeneous oxidation of mercury in the presence of HCl under entrained flow conditions. Using the data generated above, with homogeneous reactions accounting for less than 10% of the oxidation, comparisons were made to pilot- and full-scale data. The results suggest that heterogeneous reactions, as with the case of iron oxide, and adsorption on solid carbon must be taking place in the full-scale system. Modeling of mercury oxidation using parameters from the literature was conducted to further study the contribution of homogeneous pathways to Hg oxidation in coal combustion systems. Calculations from the literature used rate parameters developed in different studies, in some cases using transition state theory with a range of approaches and basis sets, and in other cases using empirical approaches. To address this, rate constants for the entire 8-step homogeneous Hg oxidation sequence were developed using an internally consistent transition state approach. These rate constants when combined with the appropriate sub-mechanisms produced lower estimates of the overall extent of homogeneous oxidation, further suggesting that heterogeneous pathways play an important role in Hg oxidation in coal-fired systems.

01 COAL, LIGNITE, AND PEAT↗

Long-term Changes in Pulmonary Function After Incidental Lung Irradiation for Breast Cancer: A Prospective Study With 7-Year Follow-up

Purpose: To evaluate late pulmonary function changes after incidental pulmonary irradiation for breast cancer. Methods and Materials: Forty-three consecutive female patients diagnosed with breast carcinoma and treated with postoperative radiation therapy (RT) at the same dose (50 Gy) and fractionation (2 Gy/fraction, 5 days/week) were enrolled. Pulmonary function tests (PFT) and ventilation/perfusion scans were performed before RT and 6, 12, 24, and 84 months afterward. Results: Forty-one patients, mean age 55 years, were eligible for the analysis. No differences were found in the baseline PFT values for age, smoking status and previous chemotherapy; women undergoing mastectomy showed baseline spirometric PFT values lower than did women treated with conservative surgery. The mean pulmonary dose was 10.9 Gy, being higher in women who also received lymph node RT (15.8 vs 8.6, P<.01). Only 1 patient experienced symptomatic pneumonitis. All PFT values showed a reduction at 6 months. From then on, the forced vital capacity and forced expiratory volume in 1 second began their recovery until reaching, and even exceeding, their baseline values at 7 years. Diffusing capacity of the lungs for carbon monoxide and ventilation/perfusion scans continued to reduce for 24 months and then partially recovered their baseline values (-3.5%, -3.8%, and -5.5%, respectively). Only the percentage difference at 7 years in the ventilation scan correlated with the dosimetric parameters studied. Other variables, such as age, smoking status, previous chemotherapy, and concomitant tamoxifen showed no significant relation with changes in PFT ({Delta}PFT) values at 7 years. Conclusions: The study of reproducible subclinical parameters, such as PFT values, shows how their figures decrease in the first 2 years but practically recover their baseline values in the long term. The extent of the reduction in PFT values was small, and there was no clear association with several dosimetric and clinical parameters.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

A novel process for production of spherical PBT powders and their processing behavior during laser beam melting

Additive manufacturing processes like laser beam melting of polymers are established for production of prototypes and individualized parts. The transfer to other areas of application and to serial production is currently hindered by the limited availability of polymer powders with good processability. Within this contribution a novel process route for the production of spherical polymer micron-sized particles of good flowability has been established and applied to produce polybutylene terephthalate (PBT) powders. Moreover, the applicability of the PBT powders in selective laser beam melting and the dependencies of process parameters on device properties will be outlined. First, polymer micro particles are produced by a novel wet grinding method. To improve the flowability the produced particles the particle shape is optimized by rounding in a heated downer reactor. A further improvement of flowability of the cohesive spherical PBT particles is realized by dry coating. An improvement of flowability by a factor of about 5 is achieved by subsequent rounding of the comminution product and dry-coating as proven by tensile strength measurements of the powders. The produced PBT powders were characterized with respect to their processability. Therefore thermal, rheological, optical and bulk properties were analyzed. Based on these investigations a range of processing parameters was derived. Parameter studies on thin layers, produced in a selective laser melting system, were conducted. Hence appropriate parameters for processing the PBT powders by laser beam melting, like building chamber temperature, scan speed and laser power have been identified.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Fundamental studies on the Cs dynamics under ion source conditions

The performance of surface conversion based negative hydrogen ion sources is mainly determined by the caesium dynamics. Therefore, fundamental investigations in vacuum and plasma are performed at a flexible laboratory setup with ion source parameters. Studies on the influence of Cs on the plasma parameters of H{sub 2} and D{sub 2} plasmas showed that n{sub e} and T{sub e} in the bulk plasma are not affected by relevant amounts of Cs and no isotopic differences could be observed. The coating of the vessel surfaces with Cs, however, leads to a considerable gettering of hydrogen atoms from the plasma volume and to the decrease of n{sub e} close to a sample surface due to the formation of negative ions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

An Integrated Techno-economic Modeling Tool for sCO 2 Brayton Cycles

The supercritical CO 2 (sCO 2 ) Brayton Economics Tool (sBET) was developed to evaluate and perform sensitivity studies on recompression closed Brayton cycles (RCBCs). This integrated techno-economic tool calculates key system performance and levelized cost of energy (LCOE) based on user-defined input on key variables such as system size, recuperator effectiveness, turbine inlet temperature, etc. The goal of this integrated tool is to allow system designers to understand the tradeoffs associated with various key design decisions, such as recuperator effectiveness and overall system cost. This work includes a description of LCOE calculation methodology, component system cost models for turbomachinery and heat exchangers based on vendor quotes and published literature, and the results of several parameter studies to identify desirable system parameters.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Multibody for Everybody (M4E): A Symbolic Dynamics Modeling Tool with Applications in Simulation, Control, and Optimization

Developing the analytical model of a multibody system is often the initial step in control and optimization. The analytical model (equations of motion) describes a system’s time evolution under specified forcing conditions. Although developing these equations is easy for simple systems, this process becomes more complex for systems composed of multiple bodies. Deriving equations of motion for complex multibody systems requires specialized expertise in multibody dynamics, is time-consuming, and is susceptible to error. To address this issue, this paper presents an open-source, easy-to-use, systematic framework to derive symbolic equations of motion in both Python and MATLAB using the joint coordinate formulation. This formulation results in a set of ordinary differential equations that use the minimum set of coordinates needed to model a system. The symbolic representation provides better insight into the influence of design parameters on system performance, facilitates sensitivity analysis and parameter studies, and supports direct implementation of control and optimization routines. The tool enables numerical simulation for specified parameter sets, is modular for straightforward integration with other tools and libraries, and allows incorporation of hydrodynamics, mooring, and other external forces. The result is a reproducible, extensible pipeline for modeling, simulation, and design of complex multibody systems. The proposed tool is versatile and can be applied to domains such as robotics, control, and design. In addition, we integrated external libraries that provide capabilities for modeling offshore systems such as underwater robots and marine energy converters.

16 TIDAL AND WAVE POWER↗

OSCILLATIONS OF THE INNER REGIONS OF VISCOUS ACCRETION DISKS

Although quasi-periodic oscillations (QPOs) have been discovered in different X-ray sources, their origin is still a matter of debate. Analytical studies of hydrodynamic accretion disks have shown three types of trapped global modes with properties that appear to agree with the observations. However, these studies take only the linear effects into account. Moreover, observations suggest that resonances between modes play a crucial role. A systematic, numerical study of this problem is therefore needed. In this paper, we use a pseudo-spectral algorithm to perform a parameter study of the inner regions of hydrodynamic disks. By assuming alpha-viscosity, we show that steady state solutions rarely exist. The inner edges of the disks oscillate and excite axisymmetric waves, which provide a plausible explanation for the high-frequency QPOs observed from accreting black holes. In addition, the flows inside the inner edges are sometimes unstable to non-axisymmetric perturbations. One-armed, or even two-armed, spirals are developed. When the Reynolds numbers are above certain critical values, the inner disks go through some transient turbulent states characterized by strong trailing spirals; while large-scale leading spirals are developed in the outer disks. We compared our numerical results with standard thin disk oscillation models. Albeit the non-axisymmetric features have their analytical counterparts, more careful study is needed to explain the axisymmetric oscillations.

79 ASTRONOMY AND ASTROPHYSICS↗

IMPORTANCE OF SURFACE TURBULENT DIFFUSIVITY IN THE SOLAR FLUX-TRANSPORT DYNAMO

A revision to the flux-transport dynamo model for the solar sunspot cycle is proposed and is demonstrated by using the axisymmetric kinematic simulations. The flux-transport dynamo has succeeded to explain the general cyclic behaviors of the sunspots. It has been known, however, that previous models failed to avoid the strong polar surface field and the strong toroidal field at the base in the high latitude, both of which are not consistent with observations. We propose a new regime of the flux-transport dynamo model by assuming an additional intense diffusivity profile near the surface. The surface poloidal field generated by the alpha effect is transported down to the base of the convection zone not by the meridional flow but by the surface diffusion mainly in the mid-latitude. With a moderate alpha quenching, this prevents the concentration of the polar surface field and the amplification of the toroidal field at the high latitude. The condition to obtain the proper magnetic field strength near the pole is eta{sub surf}/u{sub 0}>2 x 10{sup 9} cm, where eta{sub surf} and u{sub 0} are the surface diffusivity and the meridional flow speed, respectively. We also do some parameter studies to ensure the importance of the surface strong diffusivity. In addition, the dependence of the cycle period on free parameters, the speed of meridional flow and the surface diffusivity, is investigated.

79 ASTRONOMY AND ASTROPHYSICS↗