Search NASA⌕ Search

SEARCH · Search NASA

Results for “parametric analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Potentialities of laser systems for remote sensing of the atmosphere at a wide variability of optical and physical characteristics: dimensionless-parametric modelling

Within the framework of generalisation of different approaches to the modelling of atmospheric lidars, the methodology capabilities for dimensionless-parametric analysis are expanded. The developed approach simplifies the analysis of the signal-to-noise ratio and potential capabilities of existing and newly developed monitoring systems with a wide variability of atmospheric and optical conditions and a great variety of modern lidars. Its applicability to the problems of remote atmospheric sensing, environmental monitoring and lidar navigation in providing the eye safety, noise immunity and reliability is discussed. (paper)

42 ENGINEERING↗

Fabrication Flaw Density and Distribution In Repairs to Reactor Pressure Vessel and Piping Welds

The Pacific Northwest National Laboratory is developing a generalized fabrication flaw distribution for the population of nuclear reactor pressure vessels and for piping welds in U.S. operating reactors. The purpose of the generalized flaw distribution is to predict component-specific flaw densities. The estimates of fabrication flaws are intended for use in fracture mechanics structural integrity assessments. Structural integrity assessments, such as estimating the frequency of loss-of-coolant accidents, are performed by computer codes that require, as input, accurate estimates of flaw densities. Welds from four different reactor pressure vessels and a collection of archived pipes have been studied to develop empirical estimates of fabrication flaw densities. This report describes the fabrication flaw distribution and characterization in the repair weld metal of vessels and piping. This work indicates that large flaws occur in these repairs. These results show that repair flaws are complex in composition and sometimes include cracks on the ends of the repair cavities. Parametric analysis using an exponential fit is performed on the data. The relevance of construction records is established for describing fabrication processes and product forms. An analysis of these records shows there was a significant change in repair frequency over the years when these components were fabricated. A description of repair flaw morphology is provided with a discussion of fracture mechanics significance. Fabrication flaws in repairs are characterized using optimized-access, high-sensitivity nondestructive ultrasonic testing. Flaw characterizations are then validated by other nondestructive evaluation techniques and complemented by destructive testing.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

BISON Fuel Performance Analysis of FeCrAl cladding with updated properties

In order to improve the accident tolerance of light water reactor (LWR) fuel, alternative cladding materials have been proposed to replace zirconium (Zr)-based alloys. Of these materials, there is a particular focus on iron-chromium-aluminum (FeCrAl) alloys due to much slower oxidation kinetics in high-temperature steam than Zr-alloys. This should decrease the energy release due to oxidation and allow the cladding to remain integral longer in the presence of high temperature steam, making accident mitigation more likely. As a continuation of the development for these alloys, suitability for normal operation must also be demonstrated. This research is focused on modeling the integral thermo-mechanical performance of FeCrAl-cladded fuel during normal reactor operation. Preliminary analysis has been performed to assess FeCrAl alloys (namely Alkrothal 720 and APMT) as a suitable fuel cladding replacement for Zr-alloys, using the MOOSE-based, finite-element fuel performance code BISON and the best available thermal-mechanical and irradiation-induced constitutive properties. These simulations identify the effects of the mechanical-stress and irradiation response of FeCrAl, and provide a comparison with Zr-alloys. In comparing these clad materials, fuel rods have been simulated for normal reactor operation and simple steady-state operation. Normal reactor operating conditions target the cladding performance over the rod lifetime (~4 cycles) for the highest-power rod in the highest-power fuel assembly under reactor power maneuvering. The power histories and axial temperature profiles input into BISON were generated from a neutronics study on full-core reactivity equivalence for FeCrAl using the 3D full core simulator NESTLE. Evolution of the FeCrAl cladding behavior over time is evaluated by using steady-state operating conditions such as a simple axial power profile, a constant cladding surface temperature, and a constant fuel power history. The fuel rod designs and operating conditions used are based off the Peach Bottom BWR and design consideration was given to minimize the neutronic penalty of the FeCrAl cladding by changing fuel enrichment and cladding thickness. As this study progressed, systematic parametric analysis of the fuel and cladding creep responses were also performed.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Parametric Study of the Vacuum Permeator for the Tritium Extraction eXperiment

Tritium breeding is a critical component of any self-sustaining future fusion reactor. The liquid metal eutectic, PbLi, is of particular interest as a tritium breeder material due to its favorable thermophysical and neutronic properties. One of the several remaining challenges facing PbLi breeder blankets is the need to design and validate a highly efficient tritium extraction system. The vacuum permeator is a promising extraction concept that utilizes tritium permeation through a highly permeable metal membrane. The Tritium Extraction eXperiment (TEX) is a forced-convection PbLi loop constructed to investigate tritium extraction from PbLi with vacuum permeators. Accurate thermal-hydraulic and tritium transport models are required to establish appropriate test matrices, predict experiment outcomes, and analyze data. However, the hydrogen transport properties of PbLi and permeator materials have large uncertainties. A database is collected, and a parametric analysis is conducted on the effect of hydrogen transport material properties: diffusivity of H in PbLi and permeator, solubility of H in PbLi and permeator, and permeator surface recombination constant on the expected tritium extraction efficiency for a vacuum permeator installed in TEX. As a result, we observe solubility of H in PbLi and the permeator and the recombination constant of the permeator have the largest effect on the extraction efficiency.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

On the delayed gas breakdown in a ringing theta-pinch with bias magnetic field

A single particle model and particle-in-cell simulations are used to elucidate the breakdown physics in a ringing theta-pinch with a bias magnetic field. Previous experimental results show that gas breakdown occurs when the bias magnetic field is nullified by the theta-pinch magnetic field. The analyses presented here agree with the experimental results and show that electron kinetic energy does not exceed the ionization threshold of deuterium until the net magnetic field is approximately zero. Despite the presence of a strong electric field, the gyromotion of electrons within the bias magnetic field prevents them from gaining energy necessary to ionize the gas. Parametric analysis of the peak electron energy as a function of the bias and pre-ionization magnetic fields reveals that: (1) when the bias magnetic field is Almost-Equal-To 97% of the pre-ionization magnetic field, peak electron energies are highly erratic resulting in poor overall ionization, and (2) full ionization with repeatable behavior requires a pre-ionization to bias magnetic field ratio of approximately 2 to 1 or higher.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Fabrication Flaw Density and Distribution in Weld Repairs

The Pacific Northwest National Laboratory (PNNL) is developing a generalized flaw distribution for the population of nuclear reactor pressure vessels and for piping welds in the U. S. operating reactors. The purpose of the generalized flaw distribution is to predict component-specific flaw densities. The estimates of fabrication flaws are intended for use in fracture mechanics structural integrity assessments. Structural integrity assessments, such as estimating the frequency of loss-of-coolant accidents, are performed by computer codes that require, as input, accurate estimates of flaw densities. Welds from four different cancelled reactor pressure vessels and a collection of archived pipes have been studied to develop empirical estimates of fabrication flaw densities. This paper describes the fabrication flaw distribution and characterization in the repair weld metal of vessels and piping. This work indicates that large flaws occur in these repairs which are complex in composition and sometimes include cracks on the ends of the repair cavities. Parametric analysis using an exponential fit is performed on the data. Construction records where available were reviewed. It is difficult to make conclusions due to the limited number of construction records reviewed. However, the records reviewed to date show a significant change in repair frequency over the years when the components in this study were fabricated. A description of repair flaw morphology is provided with a discussion of fracture mechanics significance.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Carbon-free hydrogen and electricity from coal: options for syngas cooling in systems using a hydrogen separation membrane reactor - article no. 031401

Conversion of coal to carbon-free energy carriers, H-2 and electricity, with CO{sub 2} capture and storage may have the potential to satisfy at a comparatively low cost much of the energy requirements in a carbon-constrained world. This study focuses on the synergy between H{sub 2} separation membrane reactors (HSMRs) and syngas cooling with radiant and convective heat exchanges; such 'syngas coolers' invariably boost system efficiency over that obtained with quench-cooled gasification. Conventional H{sub 2} separation requires a relatively high steam-to-carbon ratio (SIC) to achieve a high level of H{sub 2} production, and thus is well matched to relatively inefficient quench cooling. In contrast, HSMRs shift the WGS equilibrium by continuously extracting reaction product H{sub 2}, thereby allowing a much lower SIC ratio and consequently a higher degree of heat recovery and (potentially) system efficiency. We first present a parametric analysis illuminating the interaction between the syngas coolers, high temperature WGS reactor and HSMR. We then compare the performance and cost of six different plant configurations, highlighting (1) the relative merits of the two syngas cooling methods in membrane-based systems, and (2) the comparative performance of conventional versus HSMR-based H{sub 2} separation in, plants with syngas coolers.

20 FOSSIL-FUELED POWER PLANTS↗

Analysis of material recovery facilities for use in life-cycle assessment

Highlights: • Life-cycle assessment of solid waste management relies on accurate process models. • Material recovery facility (MRF) processes were modeled with new primary data. • Single stream, dual stream, pre-sorted, and mixed waste MRFs were considered. • MRF electricity consumption ranges from 4.7 to 7.8 kW h per Mg input. • Total cost ranges from $19.8 to $24.9 per Mg input. - Abstract: Insights derived from life-cycle assessment of solid waste management strategies depend critically on assumptions, data, and modeling at the unit process level. Based on new primary data, a process model was developed to estimate the cost and energy use associated with material recovery facilities (MRFs), which are responsible for sorting recyclables into saleable streams and as such represent a key piece of recycling infrastructure. The model includes four modules, each with a different process flow, for separation of single-stream, dual-stream, pre-sorted recyclables, and mixed-waste. Each MRF type has a distinct combination of equipment and default input waste composition. Model results for total amortized costs from each MRF type ranged from $19.8 to $24.9 per Mg (1 Mg = 1 metric ton) of waste input. Electricity use ranged from 4.7 to 7.8 kW h per Mg of waste input. In a single-stream MRF, equipment required for glass separation consumes 28% of total facility electricity consumption, while all other pieces of material recovery equipment consume less than 10% of total electricity. The dual-stream and mixed-waste MRFs have similar electricity consumption to a single-stream MRF. Glass separation contributes a much larger fraction of electricity consumption in a pre-sorted MRF, due to lower overall facility electricity consumption. Parametric analysis revealed that reducing separation efficiency for each piece of equipment by 25% altered total facility electricity consumption by less than 4% in each case. When model results were compared with actual data for an existing single-stream MRF, the model estimated the facility’s electricity consumption within 2%. The results from this study can be integrated into LCAs of solid waste management with system boundaries that extend from the curb through final disposal.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

A new model for active nucleation site density in boiling systems

A new model for active nucleation site density in boiling systems has been developed. The model is based on parametric analysis of existing experimental data and is a function of wall superheat, pressure, and contact angle. The model is applicable for a wide pressure range - from 0.101 MPa to 19.8 MPa. Preliminary studies of temperature dependency of the contact angle have also been performed. The new model is intended to improve the predictions of the interfacial area concentration in two-fluid models and the wall temperature in subcooled boiling simulations. Validation activities have shown that the active nucleation site density predicted by the new model is in a good agreement with various published experimental data, and have demonstrated the achieved improvements as compared to existing models. (authors)

42 ENGINEERING↗

Electromagnetic simulation of helicon plasma antennas for their electrostatic shield design

A detailed electromagnetic parametric analysis of the helicon antenna (half Nagoya type) is shown at 13.56 MHz using a CST Microwave Studio 2012. The antenna is used to excite plasma inside a dielectric cylinder similar to a commercial reactor. Instead of focusing on the plasma state, the authors focus on the penetration and the three dimensional distribution of electric fields through the dielectric wall. Our aim is to reduce capacitive coupling which produces unwanted longitudinal and radial electric fields. Comparison of the helicon antenna electromagnetic performance under diverse boundary conditions shows that one is allowed to use vacuum simulations without plasma present in the cylinder, or approximate the plasma as a column of gyrotropic material with a tensor dielectric permittivity and with a sheath of a few millimeters in order to qualitatively predict the electric field distribution, thus avoiding a full plasma simulation. This way the analysis of the full problem is much faster and allows an optimal shield design. A detailed study of various shields shows that one can reduce the radial and axial fields by more than 1 order of magnitude compared to the unshielded antenna, while the azimuthal field is reduced only by a factor of 2. Optimal shield design in terms of pitch and spacing of openings is determined. Finally, an experimental proof of concept of the effect of shielding on reduced wall sputtering is provided, by monitoring the roughness created during oxygen plasma etching of an organic polymer.

42 ENGINEERING↗

On the Use of TMDs for Regular Buildings and Bridges under Dynamic Actions

Some R and D done recently at FEUP, under control of vibrations using TMDs is described. The first part of this study is a parametric analysis of the performance of a TMD in the mitigation of the effects of earthquakes in building-like structures. The targeted parameters in the analyses were the number of storeys of the buildings, the mass ratio mu of the TMD, and the earthquake input signals. The number of storeys of the buildings varied from 5 to 30 with increments of 5 storeys. The mass ratio of the TMD varied from 0.00 to 0.05 with increments of 0.01. The actions considered were the 1951 El Centro earthquake and the 1995 Kobe earthquake. The second part of the study addresses the control of vibrations of a pedestrian bridge at Porto under excitations produced by the pedestrians themselves.

58 GEOSCIENCES↗

Fabrication Flaw Density and Distribution in Piping Weldments

The U.S. Nuclear Regulatory Commission supported the Pacific Northwest National Laboratory (PNNL) to develop empirical data on the density and distribution of fabrication flaws in nuclear reactor components. These data are needed to support probabilistic fracture mechanics calculations and studies on component structural integrity. PNNL performed nondestructive examination inspections and destructive testing on archived piping welds to determine the fabrication flaw size and distribution characteristics of the flaws in nuclear power plant piping weldments. Eight different processes and product forms in piping weldments were studied including wrought stainless steel and dissimilar metal weldments. Parametric analysis using an exponential fit was performed on the data. Results were created as a function of the through-wall size of the fabrication flaws as well as the length distribution. The results are compared and contrasted with those developed for reactor pressure vessel processes and product forms. The most significant findings were that the density of fabrication flaws versus through-wall size was higher in piping weldments than that for the reactor pressure vessel weldments, and the density of fabrication flaws versus through-wall size in both reactor pressure vessel weld repairs and piping weldments were greater than the density in the original weldments. Curves showing these distributions are presented.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Resolution enhancement of lung 4D-CT via group-sparsity

Purpose: 4D-CT typically delivers more accurate information about anatomical structures in the lung, over 3D-CT, due to its ability to capture visual information of the lung motion across different respiratory phases. This helps to better determine the dose during radiation therapy for lung cancer. However, a critical concern with 4D-CT that substantially compromises this advantage is the low superior-inferior resolution due to less number of acquired slices, in order to control the CT radiation dose. To address this limitation, the authors propose an approach to reconstruct missing intermediate slices, so as to improve the superior-inferior resolution.Methods: In this method the authors exploit the observation that sampling information across respiratory phases in 4D-CT can be complimentary due to lung motion. The authors’ approach uses this locally complimentary information across phases in a patch-based sparse-representation framework. Moreover, unlike some recent approaches that treat local patches independently, the authors’ approach employs the group-sparsity framework that imposes neighborhood and similarity constraints between patches. This helps in mitigating the trade-off between noise robustness and structure preservation, which is an important consideration in resolution enhancement. The authors discuss the regularizing ability of group-sparsity, which helps in reducing the effect of noise and enables better structural localization and enhancement.Results: The authors perform extensive experiments on the publicly available DIR-Lab Lung 4D-CT dataset [R. Castillo, E. Castillo, R. Guerra, V. Johnson, T. McPhail, A. Garg, and T. Guerrero, “A framework for evaluation of deformable image registration spatial accuracy using large landmark point sets,” Phys. Med. Biol. 54, 1849–1870 (2009)]. First, the authors carry out empirical parametric analysis of some important parameters in their approach. The authors then demonstrate, qualitatively as well as quantitatively, the ability of their approach to achieve more accurate and better localized results over bicubic interpolation as well as a related state-of-the-art approach. The authors also show results on some datasets with tumor, to further emphasize the clinical importance of their method.Conclusions: The authors have proposed to improve the superior-inferior resolution of 4D-CT by estimating intermediate slices. The authors’ approach exploits neighboring constraints in the group-sparsity framework, toward the goal of achieving better localization and noise robustness. The authors’ results are encouraging, and positively demonstrate the role of group-sparsity for 4D-CT resolution enhancement.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

New contactless method for thermal diffusivity measurements using modulated photothermal radiometry

Modulated photothermal radiometry is a non-destructive and contactless technique for the characterization of materials. It has two major advantages: a good signal-to-noise ratio through a synchronous detection and a low dependence on the heating power and the optical properties of the sample surface. This paper presents a new method for characterizing the thermal diffusivity of a material when the phase shift between a modulated laser power signal and the thermal signal of a plate sample is known at different frequencies. The method is based on a three-dimensional analytical model which is used to determine the temperature amplitude and the phase in the laser heating of the plate. A new simple formula was developed through multi-parametric analysis to determine the thermal diffusivity of the plate with knowledge of the frequency at the minimum phase shift, the laser beam radius r{sub 0} and the sample thickness L. This method was developed to control the variation of the thermal diffusivity of nuclear components and it was first applied to determine the thermal diffusivity of different metals: 304 L stainless steel, nickel, titanium, tungsten, molybdenum, zinc, and iron. The experimental results were obtained with 5%–10% accuracy and corresponded well with the reference values. The present paper also demonstrates the limit of application of this method for plate with thickness r{sub 0}/100 ≤ L ≤ r{sub 0}/2. The technique is deemed interesting for the characterization of barely accessible components that require a contactless measurement.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

A parametric study of the linear growth of magnetospheric EMIC waves in a hot plasma

Since electromagnetic ion cyclotron (EMIC) waves in the terrestrial magnetosphere play a crucial role in the dynamic losses of relativistic electrons and energetic protons and in the ion heating, it is important to pursue a comprehensive understanding of the EMIC wave dispersion relation under realistic circumstances, which can shed significant light on the generation, amplification, and propagation of magnetospheric EMIC waves. The full kinetic linear dispersion relation is implemented in the present study to evaluate the linear growth of EMIC waves in a multi-ion (H{sup +}, He{sup +}, and O{sup +}) magnetospheric plasma that also consists of hot ring current protons. Introduction of anisotropic hot protons strongly modifies the EMIC wave dispersion surface and can result in the simultaneous growth of H{sup +}-, He{sup +}-, and O{sup +}-band EMIC emissions. Our parametric analysis demonstrates that an increase in the hot proton concentration can produce the generation of H{sup +}- and He{sup +}-band EMIC waves with higher possibility. While the excitation of H{sup +}-band emissions requires relatively larger temperature anisotropy of hot protons, He{sup +}-band emissions are more likely to be triggered in the plasmasphere or plasmaspheric plume where the background plasma is denser. In addition, the generation of He{sup +}-band waves is more sensitive to the variation of proton temperature than H{sup +}-band waves. Increase of cold heavy ion (He{sup +} and O{sup +}) density increases the H{sup +} cutoff frequency and therefore widens the frequency coverage of the stop band above the He{sup +} gyrofrequency, leading to a significant damping of H{sup +}-band EMIC waves. In contrast, O{sup +}-band EMIC waves characteristically exhibit the temporal growth much weaker than the other two bands, regardless of all considered variables, suggesting that O{sup +}-band emissions occur at a rate much lower than H{sup +}- and He{sup +}-band emissions, which is consistent with the observations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effect of graphite properties in thermal analysis of CHTR: A parametric study

Compact High Temperature Reactor (CHTR) is a {sup 233}U-Thorium fuelled, lead-bismuth cooled reactor. The CHTR core mainly consists of graphite and beryllium oxide (BeO). The CHTR core consists of nineteen prismatic beryllium oxide (BeO) moderator blocks. These 19 blocks contain centrally located graphite fuel tubes. The BeO moderator blocks are surrounded by reflector blocks (partially graphite and partially BeO). The nuclear heat from the core is removed passively by natural circulation of the coolant between top and bottom plenums, upward through the fuel tubes and returning through the downcomer tubes at the periphery. The temperature gradient in fuel tubes, downcomer tubes and BeO is very high and therefore, to take care of the differential thermal expansion, gaps are provided in the core between the tubes and other core components. These gaps affect the heat transfer through the core in radial direction. In addition, there is a large variation in thermal properties of graphite which in turn affects the thermal behaviour of the core in various operating conditions. The fuel of CHTR is TRISO coated particle fuel. These particles are packed in with graphite powder as matrix and made into cylindrical compacts these compacts are packed in the bores of fuel tube. In this study, the effect of the thermal conductivity variation of the graphite on the temperature distribution of the core and density variation of the matrix graphite material in fuel compact on the maximum fuel kernel temperature is studied along with the overall role of graphite properties variation in heat transfer.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

OpenStudio® Server [SWR-07-40]

OpenStudio® Server is a web application and distributed computing tool, which is the backbone of the OpenStudio Analysis Framework (OSAF). It is intended to make parametric analysis of building energy models accessible to architects, engineers, and designers via the OpenStudio PAT GUI or the OpenStudio Analysis Gem. OpenStudio Server analyses are defined by PAT projects or OSA's. Each analysis may include many OpenStudio simulations, as determined by project configuration.

Long, Nicholas↗

Radiological Consequence Evaluation for Dragonfly Mission

The scoping calculations presented in this report were developed to provide a conservative estimate of radiological dose consequences associated with launch accidents involving one multi-mission radioisotope thermoelectric generator (MMRTG) and possibly up to 43 light-weight radioisotope heater units (LWRHUs) for the upcoming National Aeronautics and Space Administration (NASA) Dragonfly mission. This report summarizes dose consequence analysis from SAND2019-11148, “Nuclear Risk Assessment 2019 Update for the Mars 2020 Mission Environmental Impact Statement,” referred to in this document as the Mars 2020 nuclear risk analysis (NRA) and compares those results to a parametric analysis used to analyze potential dose consequences for the Dragonfly mission.

07 ISOTOPE AND RADIATION SOURCES↗