SEARCH · Search NASA

Results for “phase boundary”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

All sources NASA NTRS DOE OSTI

NASA NTRS1988

Experimental observation of electrochemical rate limitations affecting sodium ion-electron recombination at electrodes of the alkali metal thermoelectric converter at T about 1200 K

This paper considers a model of the internal impedances of thin porous Mo and W alkali metal thermoelectric converter (AMTEC), in which the kinetic parameters associated with the reaction of the beta-double-prime alumina solid electrolite (BASE)/porous metal/gas three-phase boundary can be evaluated. Impedance data in the frequency range 0.01-100,000 Hz were collected over a range of AMTEC cell operating voltages for small-area thin porous Mo and W electrodes, yielding apparent charge transfer resistances at a series of cell potentials/currents. The ohmic resistance in the AMTEC cell could be broken down and characterized with three parameters: the BASE ionic resistance, the electrode film sheet resistance, and the contact/lead resistance, all of which could be calculated or measured independently and used to calculate power curves in good agreement with observed power curves. It is shown that these calculations can be used to predict the properties of electrodes with optimized parameters or to detect enhanced transport modes.

Williams, R. M.↗

NASA NTRS1989

The parent magmas of the SNC meteorites

Mineral compositions, partition coefficients, and computer-graphic representations of liquidus phase boundaries are used here to calculate parent magma compositions for Nakhla, Chassigny, and the xenocryst assemblage in EETA79001B, ALHA77005, and the EETA79001A groundmass. The calculated SNC parent magma compositions have low concentrations of Al2O3 and widely varying wollastonitite (CaO) component. In this regard they resemble basaltic komatiites, but their range of Wo is more extensive than that of basaltic komatiites and trace element characteristics are different. The calculated Nakhla parent magma has an unusually high Wo content and does not resemble any other known magmatic composition. A model of SNC petrogenesis is proposed.

Longhi, J.↗

NASA NTRS1989

Hot isostatic pressing of silicon nitride with boron nitride, boron carbide, and carbon additions

Si3N4 test bars containing additions of BN, B4C, and C, were hot isostatically pressed in Ta cladding at 1900 and 2050 C to 98.9 percent to 99.5 percent theoretical density. Room-temperature strength data on specimens containing 2 wt pct BN and 0.5 wt pct C were comparable to data obtained for Si3N4 sintered with Y2O3, Y2O3 and Al2O3, or ZrO2. The 1370 C strengths were less than those obtained for additions of Y2O3 or ZrO2 but greater than those obtained from a combination of Y2O3 and Al2O3. SEM fractography indicated that, as with other types of Si3N4, room-temperature strength was controlled by processing flaws. The decrease in strength at 1370 C was typical of Si3N4 having an amorphous grain-boundary phase. The primary advantage of nonoxide additions appears to be in facilitating specimen removal from the Ta cladding.

Mieskowski, Diane M.↗

NASA NTRS1990

Kinetics and transport at AMTEC electrodes. II - Temperature dependence of the interfacial impedance of Na(g)/porous Mo/Na-Beta-double prime alumina

The exchange current, transfer coefficient, mass-transport parameters, and electrode capacitance at the Na(g)/porous Mo/Na-Beta-double prime alumina solid electrolyte (BASE) phase boundary have been evaluated from 740 to 1220 K. The transfer coefficient exhibits a value close to 0.5 and the exchange current is dominated by collision frequency, with no significant activation energy. Since the porous Mp-electrode adopts a fairly regular microstructure on the BASE surface, the magnitude of the exchange current of mature electrodes directly depends on the actual contact zone of the porous metal film with the BASE ceramic, and decreases slightly as grain growth occurs. The exchange currents and the mass-transport parameters derived for very porous, thin Mo electrodes indicate that the charge-transfer reaction occurs at a small fraction of the interface. High-frequency limiting capacitance and resistance values due to the interface show potential dependence and a value on the order of 1 F/sq m and 0.1-1.0 Ohm-sq cm.

Williams, R. M.↗

NASA NTRS1990

Critical behavior in the hydrogen insulator-metal transition

The vibrational Raman spectrum of solid hydrogen has been measured from 77 to 295 K in the vicinity of the recently observed insulator-metal transition and low-temperature phase transition at 150 gigapascals. The measurements provide evidence for a critical point in the pressure-temperature phase boundary of the low-temperature transition. The result suggests that below the critical temperature the insulator-metal transition changes from continuous to discontinuous, consistent with the general criteria originally proposed by Mott (1949) for metallization by band-gap closure. The effect of temperature on hydrogen metallization closely resembles that of the lower-pressure insulator-metal transitions in doped V2O3 alloys.

Hemley, R. J.↗

NASA NTRS1990

Radiobrightness of diurnally heated, freezing soil

Freezing and thawing soils exhibit unique radiometric characteristics. To examine these characteristics, diurnal insolation is modeled as one-dimensional heating of a moist soil half-space during a typical fall at a northern Great Plains site. The one-dimensional heat flow equation is nonlinear because both the enthalpy (the change in internal energy with temperature at constant pressure) and the thermal conductivity of freezing soils are nonlinear functions of temperature. The problem is particularly difficult because phase boundaries propagate in time, and because soils, particularly clay-rich soils, freeze over a range of temperatures rather than at 0 C. Diurnal radiobrightness curves at 10.7, 18.0, and 37.0-GHz were computed for each month. The 37.0-GHz radiobrightness best tracks soil surface temperature; the 10.7-37.0-GHz spectral gradient of thawed soils is strongly positive; the spectral gradient of frozen soils is slightly negative; and the midnight-to-noon spectral gradient is shifted by approximately +0.1 K/GHz by diurnal changes in the surface temperature and the thermal gradient. These observations support the use of the scanning multichannel microwave radiometer 37.0-GHz radiobrightness and its 10.7-37.0-GHz spectral gradient as discriminants in a frozen soil classifier for high-latitude prairie.

England, Anthony W.↗

NASA NTRS1990

Mechanism of the gamma-beta phase transformation of Mg2SiO4 at high temperature and pressure

The results of experiments on the phase transformation of Mg2SiO4 olivine at 15 GPa pressure in a multianvil cell are reported. At this pressure and a temperature of 900 C, early formed metastable gamma-spinel transforms partially to the beta-phase. The observed microstructures, which are similar to those in shocked meteorites, show that the gamma-to-beta transformation can occur either by diffusion-controlled growth or by a martensitic mechanism, depending on how far the pressure-temperature conditions deviate from their values at phase equilibrium. The results suggest that the diffusion-controlled mechanism is most likely to operate at the beta/gamma phase boundary in the mantle, but martensitic beta-to-gamma transformation might occur in subduction zones and could reduce the shear strength of the subducting slab.

Rubie, D. C.↗

NASA NTRS1990

Keyhole and weld shapes for plasma arc welding under normal and zero gravity

A first order study of the interfacial (keyhole) shape between a penetrating argon plasma arc jet and a stationary liquid metal weld pool is presented. The interface is determined using the Young-Laplace equation by assuming that the plasma jet behaves as a one-dimensional ideal gas flow and by neglecting flow within the weld pool. The solution for the keyhole shape allows an approximate determination of the liquid-solid metal phase boundary location based on the assumption that the liquid melt is a stagnant thermal boundary layer. Parametric studies examine the effect of plasma mass flow rate, initial plasma enthalpy, liquid metal surface tension, and jet shear on weldment shape under both normal and zero gravity. Among the more important findings of this study is that keyhole and weld geometries are minimally affected by gravity, suggesting that data gathered under gravity can be used in planning in-space welding.

Keanini, R. G.↗

NASA NTRS1990

The potential for ductility enhancement from surface and interface dislocation sources in NiAl

Limited ductility and toughness of NiAl and related aluminides near room temperature pose major problems in their potential application as structural materials. An analysis of these problems is presented as part of a review of the flow and fracture behavior of binary NiAl. Following this discussion is a demonstration that conditions of elastic and plastic constraint associated with phase boundaries afforded by surface films, internal lamellae, or precipitates may introduce sufficient densities of mobile dislocations to enhance the ductility of NiAl-based materials by significant amounts. Examples of this behavior are presented for several model materials, including 001- and 123-oriented single crystals of oxide-coated NiAl, directionally solidified beta-gamma-prime (Ni70Al30) and beta-gamma (Ni50Fe30Al20) in situ composites, and several NiAl/precipitate systems. The nature of the resulting dislocation substructures and the effects of several materials variables are described.

Noebe, R. D.↗

NASA NTRS1991

Melt droplet formation in energetic impacts

Impacts between rocky bodies at velocities exceeding about 15 km/sec are capable of melting or vaporizing both the impacting object and a portion of the target. Geological materials initially shocked to high pressure approach the liquid-vapor phase boundary from the liquid side as they decompress, breaking up into an expanding spray of liquid droplets. A simple theory is presented for estimating the sizes of these droplets as a function of impactor size and velocity. It is shown that these sizes are consistent with observations of microtektites and spherules found in the Cretaceous-Tertiary boundary layer, the Acraman impact structure, Archean beds in South Africa and lunar regolith. The model may also apply to the formation of chondrules.

Vickery, A. M.↗

NASA NTRS1991

Waveform effects of a metastable olivine tongue in subducting slabs

Velocity models of subducting slabs with a kinetically-depressed olivine to beta- and gamma-spinel transition are constructed, and the effect that such structures would have on teleseismic P waveforms are examined using a full-wave finite-difference method. These 2D calculations yielded waveforms at a range of distances in the downdip direction. The slab models included a wedge-shaped, low-velocity metastable olivine tongue (MOTO) to a depth of 670 km, as well as a plausible thermal anomaly; one model further included a 10-km-thick fast layer on the surface of the slab. The principal effect of MOTO is to produce grazing reflections at wide angles off the phase boundary, generating a secondary arrival 0 to 4 seconds after the initial arrival depending on the take-off angle. The amplitude and timing of this feature vary with the lateral location of the seismic source within the slab cross-section.

Vidale, John E.↗

NASA NTRS1992

Low-temperature exsolution in refractory siderophile element-rich opaque assemblages from the Leoville carbonaceous chondrite

The discovery is reported of opaque assemblages in the Leoville carbonaceous chondrite with both clear textural and chemical evidence of a major role for resolution and equilibration at relatively low temperatures in the formation of refractory siderophile element-rich assemblages. The observed phase compositions are used to bracket a previously inferred phase boundary in the Fe-Ni-Ru system. The first meteoritic occurrence of goldmanite is also reported.

Simon, S. B.↗

NASA NTRS1993

A study of electron transfer using a three-level system coupled to an ohmic bath

Electron transfer is studied using a multi-level system coupled to a bosonic bath. Two body correlation functions are obtained using both exact enumeration of spin paths and Monte Carlo simulation. It was found that the phase boundary for the coherent-incoherent transition lies at a smaller friction in the asymmetric two-level model than in the symmetric two-level model. A similar coherent-incoherent transition is observed for three-level system.

Takasu, Masako↗

NASA NTRS1993

CFD simulation of coaxial injectors

The development of improved performance models for the Space Shuttle Main Engine (SSME) is an important, ongoing program at NASA MSFC. These models allow prediction of overall system performance, as well as analysis of run-time anomalies which might adversely affect engine performance or safety. Due to the complexity of the flow fields associated with the SSME, NASA has increasingly turned to Computational Fluid Dynamics (CFD) techniques as modeling tools. An important component of the SSME system is the fuel preburner, which consists of a cylindrical chamber with a plate containing 264 coaxial injector elements at one end. A fuel rich mixture of gaseous hydrogen and liquid oxygen is injected and combusted in the chamber. This process preheats the hydrogen fuel before it enters the main combustion chamber, powers the hydrogen turbo-pump, and provides a heat dump for nozzle cooling. Issues of interest include the temperature and pressure fields at the turbine inlet and the thermal compatibility between the preburner chamber and injector plate. Performance anomalies can occur due to incomplete combustion, blocked injector ports, etc. The performance model should include the capability to simulate the effects of these anomalies. The current approach to the numerical simulation of the SSME fuel preburner flow field is to use a global model based on the MSFC sponsored FNDS code. This code does not have the capabilities of modeling several aspects of the problem such as detailed modeling of the coaxial injectors. Therefore, an effort has been initiated to develop a detailed simulation of the preburner coaxial injectors and provide gas phase boundary conditions just downstream of the injector face as input to the FDNS code. This simulation should include three-dimensional geometric effects such as proximity of injectors to baffles and chamber walls and interaction between injectors. This report describes an investigation into the numerical simulation of GH2/LOX coaxial injectors. The following sections will discuss the physical aspects of injectors, the CFD code employed, and preliminary results of a simulation of a single coaxial injector for which experimental data is available. It is hoped that this work will lay the foundation for the development of a unique and useful tool to support the SSME program.

Landrum, D. Brian↗

NASA NTRS1993

Microstructural analysis of the 2195 aluminum-lithium alloy welds

The principal objective of this research was to explain a tendency of 2195 Al-Li alloy to crack at elevated temperature during welding. Therefore, a study was made on the effect of welding and thermal treatment on the microstructure of Al-Li Alloy 2195. The critical roles of precipitates, boundaries, phases, and other features of the microstructure were inferred from the crack propagation paths and the morphology of fracture surface of the alloy with different microstructures. Particular emphasis was placed on the microstructures generated by the welding process and the mechanisms of crack propagation in such structures. Variation of the welding parameters and thermal treatments were used to alter the micro/macro structures, and they were characterized by optical and scanning electron microscopy. A theoretical model is proposed to explain changes in the microstructure of welded material. This model proposes a chemical reaction in which gases from the air (i.e., nitrogen) release hydrogen inside the alloy. Such a reaction could generate large internal stresses capable to induce porosity and crack-like delamination in the material.

Talia, George E.↗

NASA NTRS1986

C.A.D. representation of ternary and quaternary phase diagrams

This work is concerned with the utilization of C.A.D. solid-modeling software for the computer representation of three-dimensional phase diagrams. The work was undertaken in two parts. First, the C.A.D. software (I-DEAS, by Structural Dynamics Research Corp.) was integrated with a variety of auxiliary Fortran 77 and I-DEAS language programs which were written specifically for the purpose of phase diagram representation. The capabilities of the resulting suite of software for three-dimensional phase diagram representation were developed and illustrated by the construction, display and manipulation of solid-model phase diagrams for a hypothetical quaternary eutectic system. The results of this work are discussed in some detail in the attached publication ('Solid-modeling: a C.A.D. Alternative for Three-dimensional Phase Diagram Representation'). Such a technique is of general applicability, having utility in both research and education. Secondly, using the C.A.D. technique, data from the literature (gleaned from some 70 separate publications), which represent experimentally determined phase boundaries, were combined to form solid-model representations of the CMS2-M2S-S ternary space diagram and the CMS2-CAS2-M2S-S quaternary liquidus projection (where C=CaO, M=MgO, A=Al2O3, and S=SiO2). These diagrams were utilized in a concurrent study of solidification in the CMAS system.

Delao, James D.↗

NASA NTRS1994

Early differentiation of the Moon: Experimental and modeling studies and experimental and modeling studies of massif anorthosites

NASA grant NAG9-329 was in effect from 3/1/89 to 8/31/94, the last 18 months being a no-cost extension. While the grant was in effect, the P.I., coworkers, and students gave 22 talks and poster sessions at professional meetings, published 12 articles in referred journals (one more is in press, and another is in review), and edited 2 workshop reports relevant to this project. Copies of all the publications are appended to this report. The major accomplishments during the grant period have derived from three quarters: 1) the application of quantitative models of fractional crystallization and partial melting to various problems in planetary science, such as the petrogenesis of picritic glasses and mare basalts and the implications of the SNC meteorites for martian evolution; 2) an experimental study of silicate liquid immiscibility relevant to early lunar differentiation and the petrogenesis of evolved highlands rocks; and 3) experimental studies of massif anorthosites and related rocks that provide terrestrial analogs for the proposed origin of lunar anorthosites by multistage processes. The low-pressure aspects of the quantitative models were developed by the P.I. in the 1980s with NASA support and culminated with a paper comparing the crystallization of terrestrial and lunar lavas. The basis for the high-pressure modifications to the quantitative models is a data set gleaned from high pressure melting experiments done at Lamont and is supplemented by published data from other labs that constrain the baric and compositional dependences of various liquidus phase boundaries such as olivine/orthopyroxene, relevant to the melting of the mantles of the terrestrial planets. With these models it is possible to predict not only the thermal and compositional evolution of magmatic liquids ranging in composition from lumar mare basalt to terrestrial calc-alkaline basalts, but also the small increments of fractional melting that are produced when mantle rises adiabatically. Copies of the crystallization/melting programs have been given to several colleagues in planetary science. Additionally, a series of computer graphics programs, based on the algorithms in the crystallization programs have been developed that display liquidus diagrams appropriate to input compositions.

Longhi, John↗

NASA NTRS1996

Hot Hydrogen Exposure Degradation of the Strength of Mullite

This study deals with the corrosion of near stoichiometric mullite (3Al2O3-2SiO2) by pure dry hydrogen gas. Exposure of the mullite samples was at temperatures of 1050 and 1250 C for times up to 500 hours. Preferential attack of the alumino-silicate glass present in the grain boundaries of the mullite occurred after 125 hours at 1250 C. Hydrogen scrubbing of the SiO2 from the glassy grain boundaries and the mullite grains yielded a porous alumina-rich surface. The room temperature strength increased after short exposure times at 1250 C (up to 125 hours), then decreased by 53 percent after exposure for 500 hours. At 1050 C, all exposure times (25 to 500 hours) decreased the strength. After 500 hours in hydrogen at 1050 C, the room temperature strength of mullite decreased 22 percent. We also observed a rapid 25 percent strength loss after short exposure times at 1050 C. This is attributed to the calcium/hydrogen assisted crystallization of the glassy, grain-boundary phase.

Herbell, Thomas P.↗