SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
In this paper, a finite element formulation based on an assumed states method is proposed for the solution of heat conduction problems with phase change at a fixed temperature. Attention is directed toward reduction of computer cost through the use of an efficient formulation, solver and algorithm. The procedure is applied to the analysis of an electrothermally deiced aircraft surface.
It is well established that interferometric synthetic aperture radar (SAR) images can be inverted to perform surface elevation mapping. Among the factors critical to the mapping accuracy are registration of the interfering SAR images and phase unwrapping. A novel registration algorithm is presented that determines the registration parameters through optimization. A new figure of merit is proposed that evaluates the registration result during the optimization. The phase unwrapping problem is approached through a new method involving fringe line detection. The algorithms are tested with two SEASAT SAR images of terrain near Yellowstone National Park. These images were collected on Seasat orbits 1334 and 1420, which were very close together in space, i.e., less than 100 m. The resultant elevation map is compared with the USGS digital terrain elevation model.
Explore the source record for details and available documents.
This paper describes the design, development, and qualification of a new lightweight and compact Antenna Pointing Mechanism (APM). The APM was specially designed to meet the stringent mass, envelope, and environmental requirements of OFFEQ experimental satellite. During the development phase, some problems were encountered with the brushless DC motors, slip ring contact resistance, and bearing drag torque. All of these problems were resolved, and two APM units have been operating successfully in orbit since April, 1995.
In this paper we consider the simultaneous flow of oil and water in reservoir rock. This displacement process is modeled by two basic equations: the material balance or continuity equations and the equation of motion (Darcy's law). For the numerical solution of this system of nonlinear partial differential equations there are two approaches: the fully implicit or simultaneous solution method and the sequential solution method. In the sequential solution method the system of partial differential equations is manipulated to give an elliptic pressure equation and a hyperbolic (or parabolic) saturation equation. In the IMPES approach the pressure equation is first solved, using values for the saturation from the previous time level. Next the saturations are updated by some explicit time stepping method; this implies that the method is only conditionally stable. For the numerical solution of the linear, elliptic pressure equation multigrid methods have become an accepted technique. On the other hand, the fully implicit method is unconditionally stable, but it has the disadvantage that in every time step a large system of nonlinear algebraic equations has to be solved. The most time-consuming part of any fully implicit reservoir simulator is the solution of this large system of equations. Usually this is done by Newton's method. The resulting systems of linear equations are then either solved by a direct method or by some conjugate gradient type method. In this paper we consider the possibility of applying multigrid methods for the iterative solution of the systems of nonlinear equations. There are two ways of using multigrid for this job: either we use a nonlinear multigrid method or we use a linear multigrid method to deal with the linear systems that arise in Newton's method. So far only a few authors have reported on the use of multigrid methods for fully implicit simulations. Two-level FAS algorithm is presented for the black-oil equations, and linear multigrid for two-phase flow problems with strong heterogeneities and anisotropies is studied. Here we consider both possibilities. Moreover we present a novel way for constructing the coarse grid correction operator in linear multigrid algorithms. This approach has the advantage in that it preserves the sparsity pattern of the fine grid matrix and it can be extended to systems of equations in a straightforward manner. We compare the linear and nonlinear multigrid algorithms by means of a numerical experiment.
We implemented a two- and three-dimensional finite difference/front tracking technique to solve liquid-vapor phase change problems. The mathematical and the numerical features of the method were explained in great detail in our previous reports, Briefly, we used a single formula representation which incorporated jump conditions into the governing equations. The interfacial terms were distributed as singular terms using delta functions so that the governing equations would be the same as conventional conservation equations away from the interface and in the vicinity of the interface they would provide correct jump conditions. We used a fixed staggered grid to discretize these equations and an unstructured grid to explicitly track the front. While in two dimensions the front was simply a connection of small line segments, in three dimensions it was represented by a connection of small triangular elements. The equations were written in conservative forms and during the course of computations we used regriding to control the size of the elements of the unstructured grid. Moreover, we implemented a coalescence in two dimensions which allowed the merging of different fronts or two segments of the same front when they were sufficiently close. We used our code to study thermocapillary migration of bubbles, burst of bubbles at a free surface, buoyancy-driven interactions of bubbles, evaporation of drops, rapid evaporation of an interface, planar solidification of an undercooled melt, dendritic solidification, and a host of other problems cited in the reference.
Linear and planar arrays of coupled oscillators have been proposed as means of achieving high power rf sources through coherent spatial power combining. In such - applications, a uniform phase distribution over the aperture is desired. However, it has been shown that by detuning some of the oscillators away from the oscillation frequency of the ensemble of oscillators, one may achieve other useful aperture phase distributions. Notable among these are linear phase distributions resulting in steering of the output rf beam away from the broadside direction. The theory describing the operation of such arrays of coupled oscillators is quite complicated since the phenomena involved are inherently nonlinear. This has made it difficult to develop an intuitive understanding of the impact of oscillator tuning on phase control and has thus impeded practical application. In this work a simpl!fied theory is developed which facilitates intuitive understanding by establishing an analog of the phase control problem in terms of electrostatics.
Humans on the path to Mars are employing the Space Station to better understand the Life Sciences issues during long duration space flight. In this phase the problems, for example, of bone loss, skeletal muscle atrophy and radiation will be prioritized for countermeasure development. This presentation will feature NASA's critical path to the Moon and Mars as the initial blueprint for addressing these Human Life Sciences challenges necessary to accomplish a successful Mars transit, surface exploration and return to Earth. A Moon base will be the test bed for resolving the engineering obstacles for later establishment of the Mars Crew Habitat. Current engineering concept scenarios for Moon and Mars bases plus Mars transit vehicles will receive the final focus.
The phase retrieval algorithm developed for the James Webb Space Telescope (JWST) is used to process archival image data that was originally used to characterize the Hubble primary mirror edge defect. The Hubble mirror conic constant is inferred from these results and comparisons are made with earlier conic values reported by teams comprising the HARP (Hubble Aberration Recovery Project) study. A number of important lessons learned from the Hubble phase retrieval problem are described and a discussion is given on how these have been incorporated into the JWST Observatory design.
It is well known that particle shape affects flow characteristics of granular materials, as well as a variety of other solids processing issues such as compaction, rheology, filtration and other two-phase flow problems. The impact of shape crosses many diverse and commercially important applications, including pharmaceuticals, civil engineering, metallurgy, health, and food processing. Two applications studied here include the dry solids flow of lunar simulants (e.g. JSC-1, NU-LHT-2M, OB-1), and the flow properties of wet concrete, including final compressive strength. A multi-dimensional generalized, engineering method to quantitatively characterize particle shapes has been developed, applicable to both single particle orientation and multi-particle assemblies. The two-dimension, three dimension inversion problem is also treated, and the application of these methods to DEM model particles will be discussed. In the case of lunar simulants, flow properties of six lunar simulants have been measured, and the impact of particle shape on flowability - as characterized by the shape method developed here -- is discussed, especially in the context of three simulants of similar size range. In the context of concrete processing, concrete construction is a major contributor to greenhouse gas production, of which the major contributor is cement binding loading. Any optimization in concrete rheology and packing that can reduce cement loading and improve strength loading can also reduce currently required construction safety factors. The characterization approach here is also demonstrated for the impact of rock aggregate shape on concrete slump rheology and dry compressive strength.
Accident and incident analyses as well as industry group concerns and recommendations have justified taking a second look at proficiency standards related to upset recovery training and performance. Quite a number of factors and theories have been suggested-- leading the NASA Aviation Safety Program to reconsider manual handling skills in highly automated aircraft particularly in conditions that can potentially lead to Loss of Control events. Our team of Subject Matter Experts (SMEs) first identified 76 Basic Recovery Skills that were important for effective crew response under five different anomaly conditions. In addition to manual handling skills, the skill set included knowledge and cognitive skills, as well as decision making and management skills. Advanced Recovery Skills were identified by combining skills, integrating with crew resource management skills, and developing heuristics for decision making.Using the Advanced Recovery Skill set, the SMEs then developed a generic process flow starting from the problem discovery phase (e.g., identifying an anomaly) through the decision making and management phase (e.g., assessing response options), through the recovery phase (e.g., controlling the aircraft). The generic process flow was refined by testing it against six additional scenarios. The next part of the project was to develop an approach for assessing and revising a generic training curriculum (we used an operators Advanced Qualification Program (AQP) as a framework). Although many of the Basic and Advanced Recovery Skills could be found in the Job Task Listing, they were not always structured or combined in the most effective way. Recommendations were developed for assessing relevant aspects of the Job Task Listing and Continuing Qualification curriculum so that the more comprehensive set of Upset Recovery skillsincluding Human Factors--could be trained and assessed in the most appropriate and effective context. The existing AQP methodology provides a natural way to insert targeted Upset Recovery skills into its system of proficiency objectives, training devices, training activities, and ultimately, into the event sets of a simulator training scenario.
Proposed Mars Sample Return (MSR) missions would require on-orbit assembly of containment vessels to meet backward Planetary Protection requirements and transfer of the sample container through various stations and positions. Some operations would have to be performed autonomously, and others would require ground-in-loop decision-making stages and verification processes. One concept design for an Earth Return Orbiter (ERO) Capture, Contain, and Return System (CCRS) Transfer Mechanism (TM) is a multi-Degree of Freedom (DOF) manipulator that utilizes a passive End Effector (EE) to assist in containment vessel assembly. To converge on a feasible design, a robotic system process has been instantiated. This process is composed of three main phases: robotic problem definition (operating environment, operations/functions, system goals), robotic solution selection (trade studies on the number of degrees of freedom, number of mechanisms, types of mechanisms), robotic solution design, implementation, and verification and validation (kinematic configuration, robotic and kinematic analysis and topology optimization of components). As a final product of this process, a half-scale functional prototype of the TM was developed to demonstrate the end-to-end operation capability.
Lighting problem associated with terminal phase rendezvous in both earth and lunar orbit
This paper describes the second government-conducted, piloted flight simulation of the Grumman Design 698 V/STOL (vertical and short takeoff and landing) aircraft. Emphasis is on the aircraft's handling qualities as rated by various NASA, Navy, and GAC pilots with flight experience ranging from CTOL (conventional take-off and landing) to V/STOL aircraft. The Design 698 had been modified to resolve the flight problems that were of most concern to the pilots in the first investigation (Phase I). Those problems included an adverse nonminimum phase (NMP) acceleration response in both the longitudinal and lateral axes, a large thrust-response lag, and adverse ground effects. The adverse NMP acceleration is an attribute of the vertical vanes (a Grumman patent) positioned in the fan exhaust flow. The primary modifications included using the vertical-vane deflection as a thrust spoiling method, the addition of the cross-shafted propulsion system, and the implementation of two velocity and attitude control modes (standard and precision) for speeds below 50 knots.
Technique automatically sets the frequency of narrow band phase-lock loops within automatic lock-in-range. It presets a phase-lock loop to a desired center frequency with a closed loop electronic frequency discriminator and holds the phase-lock loop to that center frequency until lock is achieved.
We address the problem of optical phase errors in an optical correlator introduced by the input and filter plane spatial light modulators. Specifically, we study a laboratory correlator with magnetooptic spatial light modulator (MOSLM) devices. We measure and characterize the phase errors, analyze their effects on the correlation process, and discuss a means of correction through a design modification of the binary phase-only optical filter function. The phase correction technique is found to produce correlation results close to those of an error-free correlator.
A number of studies, especially in recent years with the Hubble Space Telescope's (HST) Goddard High Resolution Spectrograph (GHRS), have been presented on the UV line profiles of late-type stars. Generally, these consist of a few "snapshot" spectra of several different key diagnostic emission lines. From this it has become clear that many active stars possess non-gaussian line profiles. Unlike the case with AR Lac, observed with IUE, no assymetric profile has been clearly identified that results from an inhomogeneous surface temperature or density distribution. In 1993 we attempted to observe the RS CVn binary V711 Tau at several phases with the GHRS in a number of UV bandpasses in order to study profile variations as a function of phase. Unfortunately, scheduling problems, pointing errors, continuous flaring and the sparse and uneven phase sampling prevented us from achieving the primary goal. However, it is clear that a number of UV lines in the system, notably C IV, Si IV and Mg II show very extended emission out to several hundred km/s. The profiles were also clearly variable. Vilhu et al. (1997) and Walter et al. (1995) conducted a campaign on the rapidly rotating, single star AB Dor, where they observed C IV continuously for 14 hours. They found extended, non-gaussian emission in the C IV doublet and that Doppler images derived from these images were remarkably similar to the simultaneous spot-image. In a follow up study of V711 Tau we have observed another RS CVn with complete phase coverage in three key wavelength bandpasses, utilizing the ability of HST to observe some stars at high latitudes in uninterrupted fashion. Generally classified as an RS CVn, V824 Ara (HD 155555) consists of a G5 IV star in a short period orbit (P=ld.68) with a K0 V-IV companion. However, the system does not eclipse and therefore does not rigorously fit the Hall (1976) definition. There is also a visual M star companion (LDS587B) 33 arcsec away. The space velocities of the stars suggests that the binary is part of the young disk population which agrees with the high Li I lambda 6708 abundance. With the M star companion showing very high levels of activity it seems likely that the V824 Ara +LDS587B system is pre-main sequence. With rotational velocities of 37 km/s and 29 km/s for the G and K star components respectively, the system is very similar to V711 Tau. Photometric observations by Cutispoto (1993) show an amplitude, delta V approx. = 0.12 with a period equal to the orbital value derived by Pasquini et at. (1991). Dempsey et al. (1993a) found a PSPC X-ray luminosity of 2.74 x 10(exp 30)erg/s. Two-temperature coronal models were applied to the PSPC X-ray pulse-height spectra by Dempsey et al. (1993b). They found that the lower temperature component was consistent with the full sample of RS CVn binaries studied but that the hot component was slightly lower than the sample as a whole. Moderate Ca II H and K emission, filled in H alpha and radio emission are also consistent with this being a fairly active, short period binary system.
This work was aimed at developing and applying a new methodology for the efficient and accurate computation of problems involving several phases of matter. In particular, solidification processes typically involve melt/solid and sometimes melt//gas interfaces, whose location and shape is unknown a priori. This class of problems is called the free or moving boundary problem, and the numerical approaches for its solution to date are inaccurate, inefficient, and can not be readily extended to multi-dimensions or to time dependent phenomenon. Ongoing research on crystal growth at NASA and other institutions falls into the category of free boundary problems. It is exactly the accurate determination of the process dynamics and the shape and location of the interface between the phases which is responsible for the ultimate chemical segregation and the mechanical properties in the solid. This work developed the Triad Field Formalism approach for the computation of general multi-dimensional and time dependent free boundary problems. The particular subject addressed is solidification phenomena. All the relevant boundary conditions on the developing interface were exactly resolved. Several computer programs were developed during the course of this research, enabling us to determine for the first time the interplay among the various fields operating in tandem to produce the phenomena observed during solidification processes in weld pools and during crystal growth.