Search NASA⌕ Search

SEARCH · Search NASA

Results for “photoemission electron microscopy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Pressure-Thresholded Response in Cylindrically Shocked Cyclotrimethylene Trinitramine (RDX)

We demonstrate a strongly thresholded response in cyclotrimethylene trinitramine (RDX) when it is cylindrically shocked using a novel waveguide geometry. Using ultrafast single-shot multi-frame imaging, we demonstrate that <100 μm diameter single crystals of RDX embedded in a polymer host deform along preferential planes for >100 ns after the shock first arrives in the crystal. We use in situ imaging and time-resolved photoemission to demonstrate that short-lived chemistry occurs with complex deformation pathways. Using scanning electron microscopy and ultra-small-angle X-ray scattering, we demonstrate that the shock-induced dynamics leave behind porous crystals, with pore shapes and sizes that change significantly with shock pressure. A threshold pressure of ~12 GPa at the center of convergence separated the single-mode planar crystal deformations from the chemistry-coupled multi-plane dynamics at higher pressures. Our observations indicate preferential directions for deformation in our cylindrically shocked system, despite the applied stress along many different crystallographic planes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Lifshitz Transition and Band Structure Evolution in Alkali Metal Intercalated 1T′-MoTe 2

In van der Waals materials, coupling between adjacent layers is weak, and consequently interlayer interactions are weakly screened. This opens the possibility to profoundly modify the electronic structure, e.g., by applying electric fields or with adsorbates. Here, in this study, we show for the case of the topologically trivial semimetal 1T′-MoTe 2 that potassium dosing at room temperature significantly transforms its band structure. With a combination of angle-resolved photoemission spectroscopy, scanning tunneling microscopy, X-ray photoemission spectroscopy, and density functional theory we show that (i) for small concentrations of K, 1T′-MoTe 2 undergoes a Lifshitz transition with the electronic structure shifting rigidly, and (ii) for larger K concentrations 1T′-MoTe 2 undergoes significant band structure transformation. Our results demonstrate that the origin of this electronic structure change stems from alkali metal intercalation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Topological Fermi-arc surface state covered by floating electrons on a two-dimensional electride

Two-dimensional electrides can acquire topologically non-trivial phases due to intriguing interplay between the cationic atomic layers and anionic electron layers. However, experimental evidence of topological surface states has yet to be verified. Here, via angle-resolved photoemission spectroscopy (ARPES) and scanning tunnelling microscopy (STM), we probe the magnetic Weyl states of the ferromagnetic electride [Gd 2 C] 2+ ·2e - . In particular, the presence of Weyl cones and Fermi-arc states is demonstrated through photon energy-dependent ARPES measurements, agreeing with theoretical band structure calculations. Notably, the STM measurements reveal that the Fermi-arc states exist underneath a floating quantum electron liquid on the top Gd layer, forming double-stacked surface states in a heterostructure. Our work thus not only unveils the non-trivial topology of the [Gd 2 C] 2+ ·2e - electride but also realizes a surface heterostructure that can host phenomena distinct from the bulk.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Thermal hysteretic behavior and negative magnetoresistance in the charge density wave material EuTe 4

EuTe 4 is a van der Waals material exhibiting a charge density wave (CDW) with a large thermal hysteresis in the resistivity and CDW gap. In this paper, we systematically study the electronic structure and transport properties of EuTe 4 using high-resolution angle-resolved photoemission spectroscopy (ARPES), magnetoresistance (MR) measurements, and scanning tunneling microscopy (STM). Here, we observe a CDW gap of ~ 200meV at low temperatures that persists up to 400 K, suggesting that the CDW transition occurs at a much higher temperature. The ARPES intensity near the Fermi level shows large thermal hysteretic behavior, consistent with the resistivity measurement. The hysteresis in the resistivity measurement does not change under a magnetic field up to 7 T, excluding the thermal magnetic hysteretic effect. Instead, the surface topography measured with STM shows surface domains with different CDW trimerization directions, which may be important for the thermal hysteretic behavior. Interestingly, we reveal a large negative MR at low temperatures that can be associated with the canting of magnetically ordered Eu spins. Our results shed light on the understanding of magnetic, transport, and electronic properties of EuTe 4 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

van der Waals Epitaxy Growth of Bi 2 Se 3 on a Freestanding Monolayer Graphene Membrane: Implications for Layered Materials and Heterostructures

Research on two-dimensional and layered materials has expanded over the past 2 decades because of their unique properties and application potential. The key hurdles in realizing this potential are the challenges in controlling their atomic structure and their incompatibility with existing semiconductor nanofabrication techniques. Here we report on high-quality van der Waals epitaxial growth and characterization of a layered topological insulator on freestanding monolayer graphene transferred to different mechanical supports. This “templated” synthesis approach enables direct interrogation of the interfacial atomic structure of the as-grown materials and opens a route toward creating device structures with more traditional semiconductor nanofabrication techniques.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Spin and Charge Interconversion in Dirac-Semimetal Thin Films

We use spin torque ferromagnetic resonance and ferromagnetic-resonance-driven spin pumping to detect spin-charge interconversion at room temperature in heterostructure devices that interface an archetypal Dirac semimetal, Cd 3 As 2 , with a metallic ferromagnet, Ni 0.80 Fe 0.20 (permalloy). Angle-resolved photoemission directly reveals the Dirac-semimetal nature of the samples prior to device fabrication and high-resolution transmission electron microscopy is used to characterize the crystalline structure and the relevant heterointerfaces. We find that the spin-charge interconversion efficiency in Cd 3 As 2 /permalloy heterostructures is comparable to that in heavy metals and that it is enhanced by the presence of an interfacial oxide. Spin torque ferromagnetic resonance measurements reveal an in-plane spin polarization regardless of an oxidized or pristine interface. We discuss the underlying mechanisms for spin-charge interconversion by comparing our results with first principles calculations and conclude that extrinsic mechanisms dominate the observed phenomena. Our results indicate a need for caution in interpretations of spin-transport and spin-charge conversion experiments in Cd 3 As 2 devices that seek to invoke the role of topological Dirac and Fermi arc states.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Single and dual metal atom catalysts for enhanced singlet oxygen generation and oxygen reduction reaction

We demonstrate rational design of graphene-supported single and dual metal atom catalysts (SACs and DACs) for photocatalytic applications, such as singlet oxygen ( 1 O 2 ) sensitization and H 2 O 2 production. Here we combine density functional theory (DFT) and time-dependent DFT (TD-DFT) calculations with experimental verifications. We found a synergistic effect between triplet sensitization and triplet–triplet (Dexter) energy transfer; both play a role in the photocatalytic activity through the volcano plot of 3d transition metal SACs. More specifically, FeN 4 -SAC exhibits a low ISC energy gap (ΔE ISC ) of 0.039 eV, compared with 0.108 eV for FeNiN8-DACs, both possessing a high Bader charge transfer of 0.366 e- and 0.405 e-, respectively. Guided by these computational results, we synthesized a series of SACs and a DAC and confirmed their structures with scanning transmission electron microscopy (STEM) along with the X-ray absorption near-edge structure (XANES) and extended X-ray absorption fine structure (EXAFS). We then confirm their band structures with low-energy inverse photoemission spectroscopy (LEIPS) and UV-vis-NIR. Subsequently, we synthesized the catalysts for the photooxygenation of anthracene and two-electron oxygen reduction reaction (ORR) to measure their photocatalytic activity. We found that H 2 O 2 production through the two-electron ORR competes with the 1 O 2 generation through Dexter energy transfer. FeN 4 -SAC demonstrates a high photooxygenation conversion of 86% and a high 1 O 2 quantum yield of 1.04, obtained from electron spin resonance (ESR) spectroscopy, with low H 2 O 2 production. In contrast, NiN 4 -SAC exhibits a low 1 O 2 generation and a high H 2 O 2 production mainly because of the high Gibbs free energy of the OOH* intermediate. In conclusion, this work proposes an effective DFT-guided strategy for designing SACs and DACs for various photocatalytic applications.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Nanoscale visualization and spectral fingerprints of the charge order in ScV 6 Sn 6 distinct from other kagome metals

Charge density waves (CDWs) in kagome metals have been tied to many exotic phenomena. Here, using spectroscopic-imaging scanning tunneling microscopy and angle-resolved photoemission spectroscopy, we study the charge order in kagome metal ScV 6 Sn 6 . The similarity of electronic band structures of ScV 6 Sn 6 and TbV 6 Sn6 (where charge ordering is absent) suggests that charge ordering in ScV 6 Sn 6 is unlikely to be primarily driven by Fermi surface nesting of the Van Hove singularities. In contrast to the CDW state of cousin kagome metals, we find no evidence supporting rotation symmetry breaking. Differential conductance dI/dV spectra show a partial gap Δ 1 CO ≈ 20 meV at the Fermi level. Interestingly, dI/dV maps reveal that charge modulations exhibit an abrupt phase shift as a function of energy at energy much higher than Δ 1 CO , which we attribute to another spectral gap. Our experiments reveal a distinctive nature of the charge order in ScV 6 Sn 6 with fundamental differences compared to other kagome metals.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Covalent Organic Framework (COF) Derived Ni–N–C Catalysts for Electrochemical CO 2 Reduction: Unraveling Fundamental Kinetic and Structural Parameters of the Active Sites

Electrochemical CO 2 reduction is a potential approach to convert CO 2 into valuable chemicals using electricity as feedstock. Abundant and affordable catalyst materials are needed to upscale this process in a sustainable manner. Nickel-nitrogen-doped carbon (Ni-N-C) is an efficient catalyst for CO 2 reduction to CO, and the single-site Ni-N x motif is believed to be the active site. However, critical metrics for its catalytic activity, such as active site density and intrinsic turnover frequency, so far lack systematic discussion. In this work, we prepared a set of covalent organic framework (COF)-derived Ni-N-C catalysts, for which the Ni-N x content could be adjusted by the pyrolysis temperature. The combination of high-angle annular dark-field scanning transmission electron microscopy and extended X-ray absorption fine structure evidenced the presence of Ni single-sites, and quantitative X-ray photoemission addressed the relation between active site density and turnover frequency.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Order-disorder phase transition driven by interlayer sliding in lead iodides

A variety of phase transitions have been found in two-dimensional layered materials, but some of their atomic-scale mechanisms are hard to clearly understand. Here, we report the discovery of a phase transition whose mechanism is identified as interlayer sliding in lead iodides, a layered material widely used to synthesize lead halide perovskites. The low-temperature crystal structure of lead iodides is found not 2H polytype as known before, but non-centrosymmetric 4H polytype. This undergoes the order-disorder phase transition characterized by the abrupt spectral broadening of valence bands, taken by angle-resolved photoemission, at the critical temperature of 120 K. It is accompanied by drastic changes in simultaneously taken photocurrent and photoluminescence. The transmission electron microscopy is used to reveal that lead iodide layers stacked in the form of 4H polytype at low temperatures irregularly slide over each other above 120 K, which can be explained by the low energy barrier of only 10.6 meV/atom estimated by first principles calculations. Our findings suggest that interlayer sliding is a key mechanism of the phase transitions in layered materials, which can significantly affect optoelectronic and optical characteristics.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Evolution of Electronic Properties of Graphene Nanoribbons with Progressive Carving: From Straight to Porous to Chevron Ribbons

Graphene nanoribbons (GNRs) are highly versatile materials due to their unique electronic, magnetic, and optical properties, which can be precisely tuned by controlling their width, edge structure, and topology. Here, we report the on-surface synthesis and characterization of a straight N = 15 armchair GNR with periodic annulene nanopores (15-pGNR). It serves as a structural link between two well-established GNRs: the pristine N = 15 armchair GNR without pores (15-AGNR) and the chevron GNR (cGNR). With the addition of the 15-pGNR reported in this study, these three GNRs form a rare experimentally accessible series of ribbons, in which the evolution of electronic properties can be tracked upon progressive carving of a basic 15-AGNR: first, by creating periodic nanopores to form 15-pGNR and then by extending the pore area and producing meandering cGNR. We have designed a molecular precursor for the 15-pGNR and grown the nanoribbons on single-crystal gold substrates by on-surface synthesis in ultra-high vacuum (UHV) conditions. The atomically precise structure of 15-pGNR was confirmed by scanning tunneling microscopy (STM) and non-contact atomic force microscopy (nc-AFM). The band gap of 15-pGNR was studied by scanning tunneling spectroscopy (STS) and dI/dV mapping, and the occupied electronic levels were investigated by angle-resolved photoemission spectroscopy (ARPES). A theoretical and experimental comparison of 15-pGNRs, 15-AGNRs, and cGNRs demonstrates that the introduction of periodic nanopores into 15-AGNR leads to a more than 2-fold increase in its band gap. In contrast, the band gaps of 15-pGNR and cGNR differ only by about 15%. Such band gap increase can be qualitatively understood to arise from two combined effects, the periodic perforation of the graphene lattice and the confinement effect induced by the GNR width.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2022

Spectral and polarization based imaging in deep-ultraviolet excited photoelectron microscopy

Using photoelectron emission microscopy, nanoscale spectral imaging of atomically thin MoS2 buried between Al2O3 and SiO2 is achieved by monitoring the wavelength and polarization dependence of the photoelectron signal excited by deep-ultraviolet light. Although photons induce the photoemission, images can exhibit resolutions below the photon wavelength as electrons sense the response. To validate this concept, the dependence of photoemission yield on the wavelength and polarization of the exciting light was first measured and then compared to simulations of the optical response quantified with classical optical theory. A close correlation between experiment and theory indicates that photoemission probes the optical interaction of UV-light with the material stack directly. The utility of this probe is then demonstrated when both the spectral and polarization dependence of photoemission observe spatial variation consistent with grains and defects in buried MoS2. Taken together, these new modalities of photoelectron microscopy allow mapping of optical property variation at length scales unobtainable with conventional light-based microscopy.

Beechem, Thomas E. (ORCID:0000000275360719)↗
DOE OSTI2025

Decoupling Li out-diffusion and surface diffusion in the lithiation-assisted epitaxial growth of lithium tungstate

Lithiation-assisted epitaxy offers a flexible and robust approach for synthesizing high-quality Li-containing materials and interfaces with precise control. Here, in this study, we use lithium tungstate (Li x WO 3+x/2 , where x = 0 to 2) as a model system to investigate the intertwined effects of Li out-diffusion-induced compositional changes and surface-diffusion-induced morphological changes. By systematically varying synthesis and processing conditions, we uncover their impact on lithium tungstate film formation. Comprehensive characterizations, including X-ray diffraction, atomic force microscopy, X-ray photoemission spectroscopy and time-of-flight secondary ion mass spectrometry, reveal that low-temperature growth (< 300 °C) followed by high-temperature annealing yields continuous lithium tungstate films with significantly reduced surface roughness. In contrast, high-temperature deposition (≥ 300 °C) accelerates surface diffusion and Li out-diffusion, leading to island formation. Furthermore, in situ scanning transmission electron microscopy demonstrates the beam sensitivity of Li 2 WO 4 and reveals a phase transition from Li 2 WO 4 to LiWO 3.5 under prolonged electron beam exposure. These findings deepen our understanding of how to control composition and morphology of Li-containing films, providing valuable insights for the design and integration of energy materials.

Shi, Jueli [Pacific Northwest National Laboratory ↗
DOE OSTI2025

Altermagnetic Band Splitting in 10 nm Epitaxial CrSb Thin Films

Altermagnets are a newly identified family of collinear antiferromagnets with a momentum-dependent spin-split band structure of non-relativistic origin, derived from spin-group symmetry-protected crystal structures. Among candidate altermagnets, CrSb is attractive for potential applications because of a large spin-splitting near the Fermi level and a high Néel transition temperature of around 700 K. Molecular beam epitaxy is used to synthesize CrSb (0001) thin films with thicknesses ranging from 10 to 100 nm. Structural characterization, using reflection high energy electron diffraction, scanning transmission electron microscopy, and X-ray diffraction, demonstrates the growth of epitaxial films with good crystallinity. Polarized neutron reflectometry shows the absence of any net magnetization, consistent with antiferromagnetic order. In vacuo angle resolved photoemission spectroscopy (ARPES) measurements probe the band structure in a previously unexplored regime of film thickness, down to 10 nm. These ARPES measurements show a bulk-type, 3D momentum-dependent band splitting of up to 0.7 eV with g-wave symmetry, consistent with that seen in prior studies of bulk single crystals. The distinct altermagnetic band structure required for potential spin-transport applications survives down to the ∼10 nm thin film limit at room temperature.

Santhosh, Sandra↗
DOE OSTI2025

Mapping the three-dimensional fermiology of the triangular lattice magnet EuAg 4 Sb 2

In this paper, we report the temperature-field phase diagram as well as present a comprehensive study of the electronic structure and three-dimensional fermiology of the triangular-lattice magnet EuAg 4 ⁢Sb 2 , utilizing quantum oscillation measurements, angle-resolved photoemission spectroscopy, and first-principles calculations. The complex magnetic phase diagram of EuAg 4 ⁢Sb 2 highlights many transitions through nontrivial AFM states. Shubnikov-de Haas and de Haas-van Alphen oscillations were observed in the polarized ferromagnetic state of EuAg 4 ⁢Sb 2 , revealing three pairs of distinct spin-split frequency branches with small effective masses. A comparison of the angle-dependent oscillation data with first-principles calculations in the ferromagnetic state and angle-resolved photoemission spectra shows good agreement, identifying tubular hole pockets and hourglass-shaped hole pockets at the Brillouin zone center, as well as diamond-shaped electron pockets at the zone boundary. As the temperature increases, the frequency branches of the tiny hourglass pockets evolve into a more cylindrical shape, while the larger pockets remain unchanged. This highlights that variations in exchange splitting, driven by changes in the magnetic moment, primarily impact the small Fermi pockets without significantly altering the overall band structure. As a result, this is consistent with first-principles calculations, which show minimal changes near the Fermi level across ferromagnetic and simple antiferromagnetic states or under varying on-site Coulomb repulsion.

36 MATERIALS SCIENCE↗
DOE OSTI2025

In‐Plane Anisotropy in van der Waals NiTeSe Ternary Alloy

Abstract The anisotropic properties of materials profoundly influence their electronic, magnetic, optical, and mechanical behaviors and are critical for a wide range of applications. In this study, the anisotropic characteristics of Ni‐based van der Waals materials, specifically NiTe 2 and its alloy NiTeSe, utilizing a combination of comprehensive scanning tunneling microscopy (STM), angle‐resolved photoemission spectroscopy (ARPES), and density functional theory (DFT) calculations, are explored. Unlike 1T‐NiTe 2 , which exhibits trigonal in‐plane symmetry, the substitution of Te with Se in NiTe 2 (resulting in the NiTeSe alloy) induces a pronounced in‐plane anisotropy. This anisotropy is clear in the STM topographs, which reveal a distinct linear order of charge distribution. Corroborating these observations, ARPES measurements and DFT calculations reveal an anisotropic Fermi surface centered at the point, which is notably elongated along the k y direction, leading to directional variations in in‐plane carrier velocities. Consequently, the Fermi velocity is highest along the k x direction where the linear charge distribution aligns in real space and is lowest along the k y direction. These findings offer valuable insights into the tunability of anisotropic properties in ternary transition metal dichalcogenide systems, highlighting their potential applications in the development of anisotropic electronic and optoelectronic devices.

Chemistry↗