Search NASA⌕ Search

SEARCH · Search NASA

Results for “polarizability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Effective Polarizability in Near-Field Microscopy of Phonon-Polariton Resonances

We investigate the resonant characteristics of planar surfaces and distinct edges of structures with the excitation of phonon-polaritons. We analyze two materials supporting phonon-polariton excitations in the mid-infrared spectrum: silicon carbide, characterized by an almost isotropic dielectric constant, and hexagonal boron nitride, notable for its pronounced anisotropy in a spectral region exhibiting hyperbolic dispersion. We formulate a theoretical framework that accurately captures the excitations of the structure involving phonon-polaritons, predicts the response in scattering-type near-field optical microscopy, and is effective for complex resonant geometries where the locations of hot spots are uncertain. We account for the tapping motion of the probe, perform analysis for different heights of the probe, and demodulate the signal using a fast Fourier transform. Using this Fourier demodulation analysis, we show that light enhancement across the entire apex is the most accurate characteristic for describing the response of all resonant excitations and hot spots. We demonstrate that computing the demodulation orders of light enhancement in the microscope probe accurately predicts its imaging.

Chemistry↗
DOE OSTI2021

Quantum Control Landscapes Beyond the Dipole Approximation: Controllability, Singular Controls, and Resources

We investigate the control landscapes of closed n-level quantum systems beyond the dipole approximation by including a polarizability term in the Hamiltonian. The latter term is quadratic in the control field. Theoretical analysis of singular controls is presented, which are candidates for producing landscape traps. The results for considering the presence of singular controls are compared to their counterparts in the dipole approximation (i.e., without polarizability). A numerical analysis of the existence of traps in control landscapes for generating unitary transformations beyond the dipole approximation is made upon including the polarizability term. An extensive exploration of these control landscapes is achieved by creating many random Hamiltonians which include terms linear and quadratic in a single control field. The discovered singular controls are all found not to be local optima. This result extends a great body of recent work on typical landscapes of quantum systems where the dipole approximation is made. We further investigate the relationship between the magnitude of the polarizability and the fluence of the control resulting from optimization. It is also shown that including a polarizability term in an otherwise uncontrollable dipole coupled system removes traps from the corresponding control landscape by restoring controllability. We numerically assess the effect of a polarizability term on a known example of a particular three-level Λ-system with a second order trap in its control landscape. It is found that the addition of the polarizability removes the trap from the landscape. The general practical control implications of these simulations are discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Measured proton electromagnetic structure deviates from theoretical predictions

The visible world is founded on the proton, the only composite building block of matter that is stable in nature. Consequently, understanding the formation of matter relies on explaining the dynamics and the properties of the proton’s bound state. A fundamental property of the proton involves the response of the system to an external electromagnetic field. It is characterized by the electromagnetic polarizabilities that describe how easily the charge and magnetization distributions inside the system are distorted by the electromagnetic field. Moreover, the generalized polarizabilities map out the resulting deformation of the densities in a proton subject to an electromagnetic field. They disclose essential information about the underlying system dynamics and provide a key for decoding the proton structure in terms of the theory of the strong interaction that binds its elementary quark and gluon constituents. Of particular interest is a puzzle in the electric generalized polarizability of the proton that remains unresolved for two decades. Here we report measurements of the proton’s electromagnetic generalized polarizabilities at low four-momentum transfer squared. We show evidence of an anomaly to the behaviour of the proton’s electric generalized polarizability that contradicts the predictions of nuclear theory and derive its signature in the spatial distribution of the induced polarization in the proton. Here, the reported measurements suggest the presence of a new, not-yet-understood dynamical mechanism in the proton and present notable challenges to the nuclear theory.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Designing optimal experiments: an application to proton Compton scattering

Interpreting measurements requires a physical theory, but the theory’s accuracy may vary across the experimental domain. To optimize experimental design, and so to ensure that the substantial resources necessary for modern experiments are focused on acquiring the most valuable data, both the theory uncertainty and the expected pattern of experimental errors must be considered. We develop a Bayesian approach to this problem, and apply it to the example of proton Compton scattering. Chiral Effective Field Theory (χEFT) predicts the functional form of the scattering amplitude for this reaction, so that the electromagnetic polarizabilities of the nucleon can be inferred from data. With increasing photon energy, both experimental rates and sensitivities to polarizabilities increase, but the accuracy of χEFT decreases. Our physics-based model of χEFT truncation errors is combined with present knowledge of the polarizabilities and reasonable assumptions about experimental capabilities at HI γ S and MAMI to assess the information gain from measuring specific observables at specific kinematics, i.e. to determine the relative amount by which new data are apt to shrink uncertainties. The strongest gains would likely come from new data on the spin observables Σ 2x and Σ 2x' at ω≃140 to 200 MeV and 40° to 120°. These would tightly constrain γ E1E1 –γ E1M2 . New data on the differential cross section between 100 and 200 MeV and over a wide angle range will substantially improve constraints on α E1 –β M1 , γ π and γ M1M1 –γ M1E2 . Good signals also exist around 160 MeV for Σ 3 and Σ 2z' . As a result, such data will be pivotal in the continuing quest to pin down the scalar polarizabilities and refine understanding of the spin polarizabilities.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

R –8 Dispersion Interaction: Derivation and Application to the Effective Fragment Potential Method

The anisotropic and isotropic R –8 dispersion contributions (disp8) are derived and implemented within the framework of the effective fragment potential (EFP) method formulated with imaginary frequency-dependent Cartesian polarizability tensors distributed at the centroids of the localized molecular orbitals (LMOs). Two forms of damping functions, intermolecular overlap-based and Tang–Toennies, are extended for disp8. To obtain LMO polarizability tensors centered at LMO centroids, an origin-shifting transformation is derived and implemented for the dipole–octopole polarizability tensor and the quadrupole–quadrupole polarizability tensor. The analytic gradient is derived and implemented for the isotropic disp8 contribution. Relative to the previously implemented empirical EFP disp8 energy, the isotropic disp8 component of the interaction energy improves the overall agreement of the EFP dispersion energies with the symmetry-adapted perturbation theory (SAPT) benchmarks, reducing the mean absolute errors (MAEs) and mean absolute percentage errors for most of the databases examined in this work. Further, while the anisotropic disp8 can further enhance the accuracy of the EFP dispersion energy and yield smaller MAEs, significantly overbound dispersion energies are predicted by the anisotropic disp8 when the maximum element in the intermolecular overlap matrix is greater than 0.1, possibly due to the breakdown of the approximations made in the EFP dispersion derivation at a short range. For potential energy scan databases, the newly developed EFP dispersion model with isotropic disp8 yields the overall correct curvature and good agreement with SAPT benchmarks around equilibrium and longer but overestimates the dispersion interactions at a short range. While the overlap-based dispersion-damping functions produce better MAEs than Tang–Toennies damping functions, further improvement is needed to better screen the large attractive dispersion energies at a short range (overlap >0.1).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

A classical model for three-body interactions in aqueous ionic systems

We present a classical induction model to evaluate the three-body ion–water–water (I–W–W) and water–water–water (W–W–W) interactions in aqueous ionic systems. The classical description of the induction energy is based on electrostatic distributed multipoles up to hexadecapole and distributed polarizabilities up to quadrupole–quadrupole on the O and H atoms of water. The monatomic ions were described by a point charge and a dipole–dipole polarizability, while for the polyatomic ions, distributed multipoles up to hexadecapole and distributed polarizabilities up to quadrupole–quadrupole were used. The accuracy of the classical model is benchmarked against an accurate dataset of 936 (I–W–W) and 2184 (W–W–W) three-body terms for 13 different monatomic and polyatomic cation and anion systems. The classical model shows excellent agreement with the reference second order Moller–Plesset and coupled-cluster single double and perturbative triple [CCSD(T)] three-body energies. The Root-Mean-Square-Errors (RMSEs) for monatomic cations, monatomic anions, and polyatomic ions were 0.29, 0.25, and 0.12 kcal/mol, respectively. The corresponding RMSE for 1744 CCSD(T)/aVTZ three-body (W–W–W) energies, used to train MB-pol, was 0.12 kcal/mol. The accuracy of the proposed classical model demonstrates that the three-body term for aqueous ionic systems can be accurately modeled classically. This approach provides a fast, efficient, and as-accurate path toward modeling the three-body term in aqueous ionic systems that is fully transferable across systems with different ions without the need to fit to tens of thousands of ab initio calculations for each ion to extend existing many-body force fields to interactions between water and ions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Molecular Dynamics Simulations of Supercritical Carbon Dioxide and Water using TraPPE and SWM4-NDP Force Fields

The increased levels of carbon dioxide (CO 2 ) emissions due to the combustion of fossil fuels and the consequential impact on global climate change have made CO 2 capture, storage, and utilization a significant area of focus for current research. In most electrochemical CO 2 applications, water is used as a proton donor due to its high availability and mobility and use as a polar solvent. Additionally, supercritical CO 2 is a promising avenue for electrochemical applications due to its unique chemical and physical properties. Consequently, understanding the interactions between water and supercritical CO 2 is of great importance for future electrochemical applications. Molecular dynamics (MD) simulation is a powerful tool that enables atomistic-resolution dynamics of molecular systems, which can complement and guide future experimental investigations. This study employed atomistic MD to study the cosolubilities, codiffusivities, and structure of supercritical CO 2 and water systems, with a polarizable water model (SWM4-NDP) and a nonpolarizable CO 2 model (TraPPE). Additionally, ab initio MD simulations were used to better understand how atomistic polarizable/nonpolarizable models compare to explicit modeling of electron densities. The polarizable water model exhibited substantial improvement in water-associated properties. In conclusion, we anticipate the development of a compatible polarizable CO 2 model to yield similar improvement, providing a pathway for realizing novel high-pressure electrochemical systems.

25 ENERGY STORAGE↗
DOE OSTI2025

Completely Multipolar Model for Many-Body Water–Ion and Ion–Ion Interactions

This work constructs an advanced force field, the Completely Multipolar Model (CMM), to quantitatively reproduce each term of an energy decomposition analysis (EDA) for aqueous solvated alkali metal cations and halide anions and their ion pairings. We find that all individual EDA terms remain well-approximated in the CMM for ion-water and ion-ion interactions, except for polarization, which shows errors due to the partial covalency of ion interactions near their equilibrium. We quantify the onset of the dative bonding regime by examining the change in molecular polarizability and Mayer bond indices as a function of distance, showing that partial covalency manifests by breaking the symmetry of atomic polarizabilities while strongly damping them at short-range. This motivates an environment-dependent atomic polarizability parameter that depends on the strength of the local electric field experienced by the ions to account for strong damping, with anisotropy introduced by atomic multipoles. The resulting CMM model for ions provides accurate dimer surfaces and three-body polarization and charge transfer compared to EDA, and shows excellent performance on various ion benchmarks including vibrational frequencies and cluster geometries.

Heindel, Joseph P↗
DOE OSTI2025

Enabling Ethanol Dehydrogenation Catalysis by Postsynthetic Anion Exchange of Triazolate-Based Metal–Organic Frameworks

Materials containing soft, polarizable elements are expanding the boundaries of catalytic properties, offering unique electronic communication and stability characteristics compared with their harder counterparts due to the enhanced covalent nature of metal–ligand interactions. However, integrating soft components like sulfur into metal–organic frameworks (MOFs) for catalytic applications remains a largely underexplored challenge. Here, we report the synthesis of a family of triazole-based MOFs and expand upon established postsynthetic anion exchange methods to incorporate sterically encumbered polarizable elements, such as alkyl thiolates. Single-crystal X-ray diffraction, coupled with elemental analysis, confirms the successful anion exchange within M 2 X 2 BBTA (M = Co, Ni; X = μ-Cl, μ-OH, μ-SH, μ-SMe, μ-SEt; H 2 BBTA = 1H,5H-benzo(1,2-d:4,5-d′)bistriazole). We found that the anion identity significantly impacts the catalytic activity and selectivity of the MOFs, especially in nonoxidative ethanol dehydrogenation. Temperature-programmed experiments indicated that the metal single sites act as catalytically active sites below 250 °C. This work not only expands the synthetic toolbox for incorporating polarizable components into MOFs but also provides critical insights into their catalytic potential.

Anions↗
DOE OSTI2022

Iraq/Afghanistan war lung injury reflects burn pits exposure

This descriptive case series retrospectively reviewed medical records from thirty-one previously healthy, war-fighting veterans who self-reported exposure to airborne hazards while serving in Iraq and Afghanistan between 2003 and the present. They all noted new-onset dyspnea, which began during deployment or as a military contractor. Twenty-one subjects underwent non-invasive pulmonary diagnostic testing, including maximum expiratory pressure (MEP) and impulse oscillometry (IOS). In addition, five soldiers received a lung biopsy; tissue results were compared to a previously published sample from a soldier in our Iraq Afghanistan War Lung Injury database and others in our database with similar exposures, including burn pits. We also reviewed civilian control samples (5) from the Stony Brook University database. Military personnel were referred to our International Center of Excellence in Deployment Health and Medical Geosciences, Donald and Barbara Zucker School of Medicine at Hofstra/Northwell under the auspices of Northwell IRB: 17-0140-FIMR Feinstein Institution for Medical Research “Clinicopathologic characteristics of Iraq Afghanistan War Lung Injury.” We retrospectively examined medical records, including exposure data, radiologic imaging, and non-invasive pulmonary function testing (MGC Diagnostic Platinum Elite Plethysmograph) using the American Thoracic Society (ATS) standard interpretation based on Morgan et al., and for a limited cohort, biopsy data. Lung tissue, when available, was examined for carbonaceous particles, polycyclic aromatic hydrocarbons (Raman spectroscopy), metals, titanium connected to iron (Brookhaven National Laboratory, National Synchrotron Light Source II, Beamline 5-ID), oxidized metals, combustion temperature, inflammatory cell accumulation and fibrosis, neutrophil extracellular traps, Sirius red, Prussian Blue, as well as polarizable crystals/particulate matter/dust. Among twenty-one previously healthy, deployable soldiers with non-invasive pulmonary diagnostic tests, post-deployment, all had severely decreased MEP values, averaging 42% predicted. These same patients concurrently demonstrated abnormal airways reactance (X5Hz) and peripheral/distal airways resistance (D5–D20%) via IOS, averaging – 1369% and 23% predicted, respectively. These tests support the concept of airways hyperresponsiveness and distal airways narrowing, respectively. Among the five soldiers biopsied, all had constrictive bronchiolitis. We detected the presence of polycyclic aromatic hydrocarbons (PAH)—which are products of incomplete combustion—in the lung tissue of all five warfighters. All also had detectable titanium and iron in the lungs. Metals were all oxidized, supporting the concept of inhaling burned metals. Combustion temperature was consistent with that of burned petrol rather than higher temperatures noted with cigarettes. All were nonsmokers. Neutrophil extracellular traps were reported in two biopsies. Compared to our prior biopsies in our Middle East deployment database, these histopathologic results are similar, since all database biopsies have constrictive bronchiolitis, one has lung fibrosis with titanium bound to iron in fixed mathematical ratios of 1:7 and demonstrated polarizable crystals. These results, particularly constrictive bronchiolitis and polarizable crystals, support the prior data of King et al. (N. Engl. J. Med. 365:222–230, 2011) Soldiers in this cohort deployed to Iraq and Afghanistan since 2003, with exposure to airborne hazards, including sandstorms, burn pits, and improvised explosive devices, are at high risk for developing chronic clinical respiratory problems, including: (1) reduction in respiratory muscle strength; (2) airways hyperresponsiveness; and (3) distal airway narrowing, which may be associated with histopathologic evidence of lung damage, reflecting inhalation of burned particles from burn pits along with particulate matter/dust. Non-invasive pulmonary diagnostic tests are a predictor of burn pit-induced lung injury

36 MATERIALS SCIENCE↗
DOE OSTI2020

Aqueous solvation of the chloride ion revisited with density functional theory: impact of correlation and exchange approximations

The specificity of aqueous halide solvation is fundamental to a wide range of bulk and interfacial phenomena spanning from biology to materials science. Halide polarizability is thought to drive the ion specificity, and if so, it is essential to have an accurate description of the electronic properties of halide ions in water. To this end, the solvation of the chloride anion, Cl - has been reinvestigated with state-of-the-art density functional theory. Specifically, the PBE-D3, PBE0-D3, and SCAN functionals have been employed to probe the impact of correlation and exchange approximations. Anticipating the findings, adding exact exchange improves the electronic structure, but simultaneously significantly reduces the Cl - polarizability, resulting in an over-structured Cl–O radial distribution function (RDF) and longer water H-bond lifetimes to Cl - . SCAN does not yield as much improvement in the energetics of Cl - relative to bulk water, but does result in a smaller reduction of the polarizability and thus a less structured Cl–O RDF, which agrees better with experiment. Special consideration is therefore warranted in assessing the impact of exchange on the energy, charge density, and the charge density response when designing and testing hybrid functionals for aqueous halide solvation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Refractive index of lithium fluoride at high dynamic stresses

Alkali halides are prototypical ionic solids whose refractive index is a fundamental property related to their lattice structure and ionic polarizability. In particular, lithium fluoride (LiF) has the largest band gap of any known transparent material and maintains transparency at high pressures, making it well suited for use as an optical window in dynamic compression experiments. While empirical fits to the measured density dependence of the refractive index have been provided, a model that is valid over the entire pressure range of experiments and based on a polarization-based theoretical description is lacking. We present a refractive index model for dynamically compressed LiF based on the Lorentz-Lorenz equation, where the molecular polarizability is determined using a single oscillator model with a strain polarizability parameter Λ=0.73. Here, we show that our modeling approach provides an excellent match to the LiF refractive index data for both shock and ramp compression experiments to 900 GPa (density compression greater than threefold). Additionally, updated fits are provided to determine the refractive index correction for LiF windows used in dynamic compression experiments.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Electric and magnetic dipole strength in 112,114,116,118,120,124 Sn

Background: There is renewed interest in electric dipole strength distributions for a variety of reasons including the extraction of the dipole polarizability related to properties of the symmetry energy and a measure for the neutron skin thickness, understanding the structure of low-energy $\textit{E}$1 strength in nuclei with neutron excess, and establishing the systematics of the isovector giant dipole resonance (IVGDR). Inelastic proton scattering at energies of a few hundred MeV and very forward angles including 0° has been established as a tool for the study of electric and magnetic dipole strength distributions in nuclei. Purpose: The present work aims at a systematic investigation of the electric and magnetic dipole strength distributions in the chain of stable even-mass tin isotopes. Methods: Inelastic proton scattering experiments were performed at the Research Center for Nuclear Physics, Osaka, with a 295-MeV beam covering laboratory angles 0°–6° and excitation energies 6–22 MeV. Cross sections due to $\textit{E}$1 and $\textit{M}$1 excitations were extracted with a multipole decomposition analysis (MDA) and then converted to reduced transition probabilities with the “virtual photon method” for $\textit{E}$1 and the “unit cross section method” for $\textit{M}$1 excitations, respectively. Including a theory-aided correction for the high-excitation-energy region not covered experimentally, the electric dipole polarizability was determined from the $\textit{E}$1 strength distributions. Results: In this work, total photoabsorption cross sections derived from the $\textit{E}$1 and $\textit{M}$1 strength distributions show significant differences compared to those from previous ($\textit{γ, xn}$) experiments in the energy region of the IVGDR. The widths of the IVGDR deduced from the present data with a Lorentz parametrization show an approximately constant value of about 4.5 MeV in contrast to the large variations between isotopes observed in previous work. The IVGDR centroid energies are in good correspondence to expectations from empirical systematics of their mass dependence. Furthermore, a study of the dependence of the IVGDR energies on bulk matter properties is presented. The $\textit{E}$1 strengths below neutron threshold show fair agreement in this work with results from ($\textit{γ, γ'}$) experiments on 112,116,120,124 Sn in the energy region between 6 and 7 MeV, where also isoscalar $\textit{E}$1 strength was found for 124 Sn. At higher excitation energies, large differences are observed, pointing to a different nature of the excited states with small ground-state branching ratios. The isovector spin-$\textit{M}$1 strengths exhibit a broad distribution between 6 and 12 MeV in all studied nuclei. Conclusions: The present results contribute to the solution of a variety of nuclear structure problems including the systematics of the energy and width of the IVGDR, the structure of low-energy $\textit{E}$1 strength in nuclei, new constraints to energy density functionals (EDFs) aiming at a systematic description of the dipole polarizability across the nuclear chart, from which properties of the symmetry energy can be derived, and the systematics of the isovector spin-$\textit{M}$1 strength in heavy nuclei.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Electromagnetic observables of open-shell nuclei from coupled-cluster theory

Here we develop a new method to describe electromagnetic observables of open-shell nuclei with two nucleons outside a closed shell. This approach combines the equation-of-motion coupled-cluster method for such systems and the Lorentz integral transform technique, expanding the applicability of coupled-cluster theory for electromagnetic observables beyond closed-(sub)shell nuclei. To validate this new approach, we compute the non-energy-weighted dipole sum rule and the dipole polarizability of 16,24 ⁢O in both the closed-(sub)shell and the new equation-of-motion coupled-cluster frameworks, finding agreement within error bars. We then analyze the evolution of the dipole polarizability along the oxygen and calcium isotopic chains. Our predictions agree well with available experimental data and other available theoretical calculations for the closed-(sub)shell 16,22 ⁢O and the open-shell 18 O. In the calcium isotopes, we observe that our dipole polarizability predictions for open-shell nuclei are lower than those of closed-(sub)shell nuclei. We expect that our predictions for 24 O and 54,56 ⁢Ca will motivate future experimental studies at the drip line.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Constraints on Nuclear Symmetry Energy Parameters

A review is made of constraints on the nuclear symmetry energy parameters arising from nuclear binding energy measurements, theoretical chiral effective field predictions of neutron matter properties, the unitary gas conjecture, and measurements of neutron skin thicknesses and dipole polarizabilities. While most studies have been confined to the parameters 𝑆 𝑉 and L, the important roles played by, and constraints on 𝐾 sym , or, equivalently, the neutron matter incompressibility 𝐾 𝑁 , are discussed. Strong correlations among 𝑆 𝑉 ,𝐿, and 𝐾 𝑁 are found from both nuclear binding energies and neutron matter theory. However, these correlations somewhat differ in the two cases, and those from neutron matter theory have smaller uncertainties. To 68% confidence, it is found from neutron matter theory that 𝑆 𝑉 = 32.0 ± 1.1 MeV, 𝐿 = 51.9 ± 7.9 MeV and 𝐾 𝑁 = 152.2 ± 38.1 MeV. Theoretical predictions for neutron skin thickness and dipole polarizability measurements of the neutron-rich nuclei 48 Ca, 120 Sn, and 208 Pb are compared to recent experimental measurements, most notably the CREX and PREX neutron skin experiments from Jefferson Laboratory. By themselves, PREX I+II measurements of 208 Pb and CREX measurement of 48 Ca suggest 𝐿 = 121 ± 47 MeV and 𝐿 = −5 ± 40 MeV, respectively, to 68% confidence. However, we show that nuclear interactions optimally satisfying both measurements imply 𝐿 = 53 ± 13 MeV, nearly the range suggested by either nuclear mass measurements or neutron matter theory, and is also consistent with nuclear dipole polarizability measurements. This small parameter range implies 𝑅 1.4 = 11.6 ± 1.0 km and Λ 1.4 = 228$^{+148}_{−90}$, which are consistent with NICER X-ray and LIGO/Virgo gravitational wave observations of neutron stars.

neutron skins↗
DOE OSTI2022

Towards sharp error analysis of extended Lagrangian molecular dynamics

The extended Lagrangian molecular dynamics (XLMD) method provides a useful framework for reducing the computational cost of a class of molecular dynamics simulations with constrained latent variables. The XLMD method relaxes the constraints by introducing a fictitious mass ε for the latent variables and solving a set of singularly perturbed ordinary differential equations. While favorable numerical performance of XLMD has been demonstrated in several different contexts in the past decade, mathematical analysis of the method remains scarce. Here, we propose the first error analysis of the XLMD method in the context of a classical polarizable force field model. While the dynamics with respect to the atomic degrees of freedom are general and nonlinear, the key mathematical simplification of the polarizable force field model is that the constraints on the latent variables are given by a linear system of equations. We prove that when the initial value of the latent variables is compatible in a sense that we define, XLMD converges as the fictitious mass ε is made small with $\mathscr{O}$(ε) error for the atomic degrees of freedom and with $\mathscr{O}$($\sqrt{ε}$) error for the latent variables, when the dimension of the latent variable d' is 1. Furthermore, when the initial value of the latent variables is improved to be optimally compatible in a certain sense, we prove that the convergence rate can be improved to $\mathscr{O}$(ε) for the latent variables as well. Numerical results verify that both estimates are sharp not only for d'=1, but also for arbitrary d'. In the setting of general d', we do obtain convergence, but with the non-sharp rate of $\mathscr{O}$($\sqrt{ε}$) for both the atomic and latent variables.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2025

Static Subspace Approximation for Random Phase Approximation Correlation Energies: Applications to Materials for Catalysis and Electrochemistry

Modeling complex materials using high-fidelity, ab initio methods at low cost is a fundamental goal for quantum chemical software packages. The GW approximation and random phase approximation (RPA) provide a unified description of both electronic structure and total energies using the same physics in a many-body perturbative approach that can be more accurate than generalized-gradient density functional theory (DFT) methods. However, GW/RPA implementations have historically been limited to either specific materials classes or application toward small chemical systems. Here, the static subspace approximation allows for reduced cost full-frequency GW/RPA calculations and has previously been benchmarked thoroughly for GW calculations. Here, we describe our approach to including partial occupations of electronic orbitals in full-frequency GW and RPA calculations for the study of electrocatalysts. We benchmarked RPA total energy calculations using the subspace approximation across a diverse test suite of materials for a variety of computational parameters. The benchmarking quantifies the impact of different extrapolation procedures for representing the static polarizability at infinite screened cutoff, and shows that using screened cutoffs above 20-25 Ryd result in diminishing accuracy returns for predicting RPA total energies. Additionally, for moderately sized electrocatalytic models, 2-3 times fewer computational resources are used to compute RPA total energies by representing the static polarizability with 20-30% of the static subspace basis, with an error of approximately 0.01 eV or better in RPA adsorption energy calculations. Finally, we show that for these electrochemical models RPA can shift DFT adsorption energy shifts by up to 0.5 eV and that GW can frequently shift DFT eigenvalues of surface and adsorbate states by approximately 0.5-1 eV.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

DFT-Based Calculation of Molecular Hyperpolarizability and SFG Intensity of Symmetric and Asymmetric Stretch Modes of Alkyl Groups

Vibrational sum frequency generation (SFG) spectroscopy has been extensively used for obtaining structural information of molecular functional groups at two-dimensional (2D) interfaces buried in the gas or liquid medium. Although the SFG experiment can be done elegantly, interpreting the measured intensity in terms of molecular orientation with respect to the lab coordinate is quite complicated. One of the main reasons is the difficulty of determining the hyperpolarizability tensors of even simple molecules that govern their SFG responses. The single-bond polarizability derivative (SBPD) model has been proposed to estimate the relative magnitude of SFG-active hyperpolarizability by assuming that the perturbation associated to each vibration is negligible. In this study, density functional theory (DFT) was used to calculate the polarizability and dipole derivative tensors of the CH 3 stretch mode of CH 3 I, CH 3 CH 2 I, CH 3 OH, CH 3 CH 2 OH. Then, the hyperpolarizability tensors of symmetric and asymmetric vibration modes were calculated considering the Boltzmann distribution of representative conformers, which allowed theoretical calculation of their SFG intensities at all polarization combinations as a function of the tilt angle of the CH 3 group with respect to the surface normal direction. Then the ratios of the calculated SFG intensities for the CH 3 peaks used in experimental studies for the CH 3 tilt angle determination were compared. This comparison clearly showed the effect of vibrational coupling among neighboring functional groups. As a result, this study presents new parameters that can be used in determining the average tilt angle of the CH 3 group at the 2D interface with SFG measurements as well as limitations of the method.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗