Search NASA⌕ Search

SEARCH · Search NASA

Results for “powder diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Structural elucidation of b-(Y,Sc){sub 2}Si{sub 2}O{sub 7} : combined use of {sub 89}Y MAS NMR and powder diffraction.

Although the structures of pure Sc{sub 2}Si{sub 2}O{sub 7} and {beta}-Y{sub 2}Si{sub 2}O{sub 7} have been described in the literature using the C2/m space group, {sup 29}Si magic angle spinning (MAS) NMR measurements of the intermediate members of the Sc{sub 2}Si{sub 2}O{sub 7}-{beta}-Y{sub 2}Si{sub 2}O{sub 7} system indicate a lowering of the symmetry to the C2 space group. Indeed, these compositions exhibit a unique Si crystallographic site and an Si-O-Si angle lower than 180{sup o}, incompatible with the C2/m space group. C2 is the only possible alternative. Space group Cm can be discarded with regard to its two different Si sites per unit cell. Moreover, {sup 89}Y MAS NMR data have revealed the existence of two different Y sites in the structure of the intermediate members of the Sc{sub 2}Si{sub 2}O{sub 7}-{beta}-Y{sub 2}Si{sub 2}O{sub 7} system, confirming the lowering of the symmetry to the C2 space group. The viability of the C2 model has therefore been tested and confirmed by refinement of synchrotron and neutron powder diffraction data for the different members of the system. The structural evolutions across the Sc{sub 2}Si{sub 2}O{sub 7}-{beta}-Y{sub 2}Si{sub 2}O{sub 7} system are discussed.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Cation Adaptive Structures Based on Manganese Cyanide Prussian Blue Analogues: Application of Powder Diffraction Data to Solve Complex, Unprecedented Stoichiometries and New Structure Types

Abstract A Mn(II) salt and A + CN − under anaerobic conditions react to form 2‐D and 3‐D extended structured compounds of A m Mn II n (CN) m+2n stoichiometry. Here, the creation and characterization of this large family of compounds, for example AMn II 3 (CN) 7 , A 2 Mn II 3 (CN) 8 , A 2 Mn II 5 (CN) 12 , A 3 Mn II 5 (CN) 13 , and A 2 Mn II [Mn II (CN) 6 ], where A represents alkali and tetraalkylammonium cations, is reviewed. Cs 2 Mn II [Mn II (CN) 6 ] has the typical Prussian blue face centered cubic unit cell. However, the other alkali salts are monoclinic or rhombohedral. This is in accord with smaller alkali cation radii creating void space that is minimized by increasing the van der Waals stabilization energy by reducing ∠Mn−N≡C, which, strengthens the magnetic coupling and increases the magnetic ordering temperatures. This is attributed to the non‐rigidity of the framework structure due the significant ionic character associated with the high‐spin Mn II sites. For larger tetraalkylammonium cations, the high‐spin Mn sites lack sufficient electrostatic A + ⋅⋅⋅NC stabilization and form unexpected 4‐ and 5‐coordinated Mn sites within a flexible, extended framework around the cation; hence, the size, shape, and charge of the cation dictate the unprecedented stoichio‐metry and unpredictable cation adaptive structures. Antiferromagnetic coupling between adjacent Mn II sites leads to ferrimagnetic ordering, but in some cases antiferromagnetic coupling of ferrimagnetic layers are compensated and synthetic antiferromagnets are observed. The magnetic ordering temperatures for ferrimagnetic A 2 Mn II [Mn II (CN) 6 ] with both octahedral high‐ and low‐spin Mn II sites increase with decreasing ∠Mn−N≡C. The crystal structures for all of the extended structured materials were obtained by powder diffraction.

Chemistry↗

Towards a machine-readable literature: finding relevant papers based on an uploaded powder diffraction pattern

A prototype application for machine-readable literature is investigated. The program is called pyDataRecognition and serves as an example of a data-driven literature search, where the literature search query is an experimental data set provided by the user. The user uploads a powder pattern together with the radiation wavelength. The program compares the user data to a database of existing powder patterns associated with published papers and produces a rank ordered according to their similarity score. The program returns the digital object identifier and full reference of top-ranked papers together with a stack plot of the user data alongside the top-five database entries. The paper describes the approach and explores successes and challenges.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High-energy X-ray powder diffraction and atomic-pair distribution-function studies of charged/discharged structures in carbon-hybridized Li2MnSiO4 nanoparticles as a cathode material for lithiumion batteries

The stable cycling performance with a high discharge capacity of similar to 190 mAh g(-1) in a carbon-hybridized Li2MnSiO4 nanostructured powder has prompted an experimental investigation of the charged/discharged structures using synchrotron-based and laboratory-based X-rays and atomic-pair distributionfunction (PDF) analyses. A novel method of in-situ spray pyrolysis of a precursor solution with glucose as a carbon source enabled the successful synthesis of the carbon-hybridized Li2(M)nSiO(4) nanoparticles. The XRD patters of the discharged (lithiated) samples exhibit a long-range ordered structure characteristic of the (beta) Li2MnSiO4 crystalline phase (space group Pmn2(1)) which dissipates in the charged (delithiated) samples. However, upon discharging the long-range ordered structure recovers in each cycle. The disordered structure, according to the PDF analysis, is mainly due to local distortions of the MnO4 tetrahedra which show a mean Mn-O nearest neighbor distance shorter than that of the long-range ordered phase. These results corroborate the notion of the smaller Mn3+/Mn4+ ionic radii in the Li extracted phase versus the larger Mn2+ ionic radius in Li inserted phase. Thus Li extraction/insertion drives the fluctuation between the disordered and the long-range ordered structures. (C) 2014 Elsevier B.V. All rights reserved.

Atomic pair distribution function↗

Remote and automated high-throughput powder diffraction measurements enabled by a robotic sample changer at SSRL beamline 2-1

The general-purpose powder diffractometer beamline (BL2-1) at the Stanford Synchrotron Radiation Lightsource (SSRL) is described. The evolution of design and performance of BL2-1 are presented, in addition to current operating specifications, applications and measurement capabilities. Recent developments involve a robotic sample changer enabling high-throughput X-ray diffraction measurements, applicable to mail-in and remote operations. In situ and operando capabilities to measure samples with different form factors ( e.g. capillary, flat plate or thin film, and transmission) and under variable experimental conditions are discussed. Several example datasets and accompanying Rietveld refinements are presented.

43 PARTICLE ACCELERATORS↗

Compact low power infrared tube furnace for in situ X-ray powder diffraction.

We describe the development and implementation of a compact, low power, infrared heated tube furnace for in situ powder X-ray diffraction experiments. Our silicon carbide (SiC) based furnace design exhibits outstanding thermal performance in terms of accuracy control and temperature ramping rates while simultaneously being easy to use, robust to abuse and, due to its small size and low power, producing minimal impact on surrounding equipment. Temperatures in air in excess of 1100 °C can be controlled at an accuracy of better than 1%, with temperature ramping rates up to 100 °C/s. The complete "add-in" device, minus power supply, fits in a cylindrical volume approximately 15 cm long and 6 cm in diameter and resides as close as 1 cm from other sensitive components of our experimental synchrotron endstation without adverse effects.

47 OTHER INSTRUMENTATION↗

A suite-level review of the neutron powder diffraction instruments at Oak Ridge National Laboratory

The suite of neutron powder diffractometers at Oak Ridge National Laboratory (ORNL) utilizes the distinct characteristics of the Spallation Neutron Source and High Flux Isotope Reactor to enable the measurements of powder samples over an unparalleled regime at a single laboratory. Full refinements over large Q ranges, total scattering methods, fast measurements under changing conditions, and a wide array of sample environments are available. Here, this article provides a brief overview of each powder instrument at ORNL and details the complementarity across the suite. Future directions for the powder suite, including upgrades and new instruments, are also discussed.

47 OTHER INSTRUMENTATION↗

Evidence of local defects in the oxygen excess apatite La{sub 9.67}(SiO{sub 4}){sub 6}O{sub 2.5} from high resolution neutron powder diffraction

From neutron diffraction data collected at 3 K on a powder of La{sub 9.67}(SiO{sub 4}){sub 6}O{sub 2.5} composition and a careful examination of the average structure, a model was proposed to explain the oxygen over-stoichiometry in the apatite structure. This model leads to realistic distances to neighbouring atoms. Moreover, it accounts perfectly for the maximum oxygen content observed in these materials. Up to 0.5 oxygen atom located at the vicinity of the 2a site (0, 0, 1/4) would be shifted to a new interstitial position in the channel at (-0.01, 0.04, 0.06), creating a Frenkel defect, with the possibility of a maximum occupancy in this site equal to twice the Frenkel defect numbers. This structural model is in good agreement with the oxygen diffusion pathways recently proposed by Bechade et al. (2009) using computer modeling techniques. It supports preferred oxygen diffusion pathways via interstitial oxygen atoms and vacant sites along [0 0 1], close to the centre of the La(2)-O channels. - Graphical abstract legend: Structural defect position and possible conduction mechanism along the c-axis (representation of two adjacent unit-cells)

36 MATERIALS SCIENCE↗

Investigation of surface structures by powder diffraction : a differential pair distribution function study on arsenate sorption on ferrihydrite.

Differential pair distribution function (d-PDF) analysis of high energy powder X-ray diffraction data was carried out on 2-line ferrihydrite nanoparticles with arsenate oxyanions adsorbed on the surface to investigate the binding mechanism. In this analysis, a PDF of ferrihydrite is subtracted from a PDF of ferrihydrite with arsenate sorbed on the surface, leaving only correlations from within the surface layer and between the surface and the particle. As-O and As-Fe correlations were observed at 1.68 and 3.29 {angstrom}, respectively, in good agreement with previously published EXAFS data, confirming a bidentate binuclear binding mechanism. Further peaks are observed in the d-PDF which are not present in EXAFS, corresponding to correlations between As and O in the particle and As-2nd Fe.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Neutron powder diffraction and first-principles computational studies of CuLi{sub x}Mg{sub 2-x} (x{approx_equal}0.08), CuMg{sub 2}, and Cu{sub 2}Mg

A small addition of Li changes the orthorhombic structure of CuMg{sub 2} to hexagonal CuLi{sub x}Mg{sub 2-x} (x=0.08). Determining the Li content of the ternary phase and Li atomic positions was our main objective for this work. For this reason we performed neutron diffraction at several different temperatures below and above room temperature. The results obtained on two neutron powder diffractometers were compared with X-ray diffraction (XRD) data, and with first-principles calculations. The first-principles calculations are in good agreement with Rietveld-refined data from neutron diffraction, but do not show a marked preference for one of several possible Li sites. The pair distribution function (PDF) fitting is consistent with Li substituting only Mg1 (1/2, 0, z). Interstitial spaces in the structure of CuMg{sub 2} and of CuLi{sub x}Mg{sub 2-x} were also considered, but are unlikely to be occupied by Li. Neutron diffraction data for binary CuMg{sub 2} and Cu{sub 2}Mg were also obtained. - Graphical abstract: CuLi{sub x}Mg{sub 2-x} with x=0.08 crystallizes in a P6{sub 2}22 hexagonal structure in which Li (red) will substitute Mg1 (1/2, 0, z) sites (Mg-grey). Cu atoms are represented by black spheres and empty spaces by transparent ones.

36 MATERIALS SCIENCE↗

Coherent 3D nanostructure of γ-Al{sub 2}O{sub 3}: Simulation of whole X-ray powder diffraction pattern

The structure and nanostructure features of nanocrystalline γ-Al{sub 2}O{sub 3} obtained by dehydration of boehmite with anisotropic platelet-shaped particles were investigated. The original models of 3D coherent nanostructure of γ-Al{sub 2}O{sub 3} were constructed. The models of nanostructured γ-Al{sub 2}O{sub 3} particles were first confirmed by a direct simulation of powder X–Ray diffraction (XRD) patterns using the Debye Scattering Equation (DSE) with assistance of high-resolution transmission electron microscopy (HRTEM) study. The average crystal structure of γ-Al{sub 2}O{sub 3} was shown to be tetragonally distorted. The experimental results revealed that thin γ-Al{sub 2}O{sub 3} platelets were heterogeneous on a nanometer scale and nanometer-sized building blocks were separated by partially coherent interfaces. The XRD simulation results showed that a specific packing of the primary crystalline blocks in the nanostructured γ-Al{sub 2}O{sub 3} particles with formation of planar defects on (001), (100), and (101) planes nicely accounted for pronounced diffuse scattering, anisotropic peak broadening and peak shifts in the experimental XRD pattern. The identified planar defects in cation sublattice seem to be described as filling cation non-spinel sites in existing crystallographic models of γ-Al{sub 2}O{sub 3} structure. The overall findings provided an insight into the complex nanostructure, which is intrinsic to the metastable γ-Al{sub 2}O{sub 3} oxide. - Highlights: • Thin plate-like crystallites of γ-Al{sub 2}O{sub 3} were obtained. • Models of 3D coherent nanostructure of γ-Al{sub 2}O{sub 3} were constructed. • Models were verified by simulating XRD patterns using the Debye Scattering Equation. • Specific broadening of XRD peaks was explained in terms of planar defects. • Primary crystalline blocks in γ-Al{sub 2}O{sub 3} are separated by partially coherent interfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Strain wave pathway to semiconductor-to-metal transition revealed by time-resolved X-ray powder diffraction

One of the main challenges in ultrafast material science is to trigger phase transitions with short pulses of light. Here we show how strain waves, launched by electronic and structural precursor phenomena, determine a coherent macroscopic transformation pathway for the semiconducting-to-metal transition in bistable Ti 3 O 5 nanocrystals. Employing femtosecond powder X-ray diffraction, we measure the lattice deformation in the phase transition as a function of time. We monitor the early intra-cell distortion around the light absorbing metal dimer and the long range deformations governed by acoustic waves propagating from the laser-exposed Ti 3 O 5 surface. We developed a simplified elastic model demonstrating that picosecond switching in nanocrystals happens concomitantly with the propagating acoustic wavefront, several decades faster than thermal processes governed by heat diffusion.

36 MATERIALS SCIENCE↗

POWGEN: a third-generation high resolution high-throughput powder diffraction instrument at the Spallation Neutron Source

Powgen represents a departure from previous designs for a time-of-flight powder diffractometer at a spallation neutron source and may be considered a third-generation design. The instrument is optimized for both parametric studies of materials under a wide range of conditions (T, P, H, flowing gases, etc) and ab-initio crystal structure determinations of complex solid-state materials with asymmetric unit-cells of the order {approx}1500 {angstrom}{sup 3}. The geometric design of the instrument allows for all detected scattered neutrons to be focused onto a single diffraction profile yielding high count rate while preserving good resolution {Delta}d/d = 0.0015 at a d = 1 {angstrom}.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Polycapillary x-ray lenses for single-shot, laser-driven powder diffraction

X-ray diffraction measurements to characterize phase transitions of dynamically compressed, high-Z matter at Mbar pressures require both sufficient photon energy and fluence to create data with high fidelity in a single shot. Large-scale laser systems can be used to generate x-ray sources above 10 keV utilizing line radiation of mid-Z elements. However, the laser-to-x-ray energy conversion efficiency at these energies is low, and thermal x-rays or hot electrons result in unwanted background. We employ polycapillary x-ray lenses in powder x-ray diffraction measurements using solid target x-ray emission from either the Z-Beamlet (ZBL) long-pulse or the Z-Petawatt (ZPW) short-pulse laser systems at Sandia National Laboratories. Polycapillary lenses allow for a 100-fold fluence increase compared to a conventional pinhole aperture while simultaneously reducing the background significantly. This enables diffraction measurements up to 16 keV at the few-photon signal level as well as diffraction experiments with ZPW at full intensity.

47 OTHER INSTRUMENTATION↗

Neutron powder diffraction, Mossbauer Spectroscopy and Optical Spectroscopy to study magnetic and nuclear lattices in Fe-based oxychlorides Ca2FeO3Cl, Sr2FeO3Cl and Sr3Fe2O5Cl2

Data for Neutron Diffraction, Mossbauer Spectoscopy and Optical Spectroscopy are contained on all three samples (Ca2FeO3Cl, Sr2FeO3Cl, and Sr3Fe2O5Cl2). Mossbauer data are in the folder "MossbauerSpectroscopy". This contains details of files and examples to read the data. The Optical Spectroscopy are in the folder "AbsorptionData", this contains one file with explanatory headers. The neutron diffraction data are in the "NeutronDiffractionData" folder. The data was collected on the HB-2A powder diffractometer at HFIR. The autoreduced files are corrected using a vanadium standard and are in arbitrary intensity units. The RawData folder contains the uncorrected data with metadata for motor positions and temperature. All measurements were collected with a constant neuton wavelength of 2.41 Angstrom. An excel spreadsheet "NeutronDiffractionData_IPTS-29118_summary" contains details for each scan. Sr3Fe2O5Cl2 data were collected at only room temperature. Ca2FeO3Cl and Sr2FeO3Cl data were collected at 4K and room temperature. The autoreduced .dat fileformat is three columns corresponding to: Two-theta, Intensity and Intensity_error.

fe-based oxychlorides↗

In situ X-ray powder diffraction studies of the synthesis of graphene oxide and formation of reduced graphene oxide

Graphene oxide (GO) and reduced graphene oxide (rGO) are important materials in a wide range of fields. The modified Hummers methods, for synthesizing GO, and subsequent thermal reduction to rGO, are often employed for production of rGO. However, the mechanism behinds these syntheses methods are still unclear. We present an in situ X-ray diffraction study of the synthesis of GO and thermal reduction of GO. The X-ray diffraction revealed that the Hummers method includes an intercalation state and finally formation of additional crystalline material. The formation of GO is observed during both the intercalation and the crystallization stage. During thermal reduction of GO three stages were observed: GO, a disordered stage, and the rGO stage. The appearance of these stages depends on the heating ramp. The aim of this study is to provide deeper insight into the chemical and physical processes during the syntheses. - Graphical abstract: In situ X-ray diffraction results for of the modified Hummers synthesis and the thermal reduction of graphene oxide, revealing three stages for both syntheses as well as new GO diffraction peaks and unidentified crystalline material for the Hummers synthesis and a disordered stage for the thermal reduction of graphene oxide. Display Omitted - Highlights: • Hummers synthesis consists of three stages: dissolution, intercalation and crystal. • GO is produced early on during the synthesis and display new diffraction peaks. • An unidentified triclinic phase is observed for the Hummers synthesis. • Thermal reduction of GO display three stages: GO, a disordered stage and rGO. • In situ XRD indicate reformation of rGO even for fast heated thermal reduction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Copper doped TiO2 nanoparticles characterized by X-ray absorption spectroscopy, total scattering, and powder diffraction – a benchmark structure–property study

Metal functionalized nanoparticles potentially have improved properties e.g. in catalytic applications, but their precise structures are often very challenging to determine. Here we report a structural benchmark study based on tetragonal anatase TiO 2 nanoparticles containing 0–2 wt% copper. The particles were synthesized by continuous flow synthesis under supercritical water–isopropanol conditions. Size determination using synchrotron PXRD, TEM, and X-ray total scattering reveals 5–7 nm monodisperse particles. The precise dopant structure and thermal stability of the highly crystalline powders were characterized by X-ray absorption spectroscopy and multi-temperature synchrotron PXRD (300–1000 K). The combined evidence reveals that copper is present as a dopant on the particle surfaces, most likely in an amorphous oxide or hydroxide shell. UV-VIS spectroscopy shows that copper presence at concentrations higher than 0.3 wt% lowers the band gap energy. The particles are unaffected by heating to 600 K, while growth and partial transformation to rutile TiO 2 occur at higher temperatures. Anisotropic unit cell behavior of anatase is observed as a consequence of the particle growth (a decreases and c increases).

Lock, Nina↗