Search NASA⌕ Search

SEARCH · Search NASA

Results for “precipitation characteristics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

A Model Intercomparison Study to Investigate Mixing Characteristics in Non‐Precipitating Stratocumulus Clouds

Recent aircraft observations of marine stratocumulus clouds consistently showed that cloud microphysical relationships vary with altitude, indicating inhomogeneous mixing characteristics near cloud top and homogeneous mixing characteristics in mid-levels of clouds. Here, we conduct model intercomparison of an idealized, non-precipitating stratocumulus cloud to evaluate model consistency and examine whether simulations can reproduce the observed mixing characteristics. The results show that eleven large-eddy simulations with various dynamics and microphysics schemes show good agreement on the thermodynamical, microphysical, and dynamical properties of the stratocumulus-topped boundary layer in a steady state. The inter-model spread in steady-state liquid water path is significantly reduced compared to previous model intercomparison studies. This improvement might be due to better models and more consistent initial conditions than those used decades ago. In addition, most simulations, including a low-dimensional simulation, capture inhomogeneous mixing characteristics near the cloud top and homogeneous mixing characteristics inside the cloud. Moreover, simulations using Lagrangian microphysics schemes agree better with the observed mixing characteristics compared with those using the bin microphysics schemes. Since most simulations do not fully resolve the entrainment process, the apparent mixing characteristics arise from the variations in the resolved cloud properties. Our results support the vertical circulation mixing hypothesis, which suggests that homogeneous mixing characteristics in mid-levels of clouds are due to the vertical circulation of entrainment-affected and diluted parcels from the cloud top moved to lower levels.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRSDate not supplied

Characteristics of Extreme Precipitation Events (EPE) in the Tropics and Association with Convective Aggregation

Extreme precipitation (EP) has become increasingly frequent and is causing more devastating impacts on society in recent years. EP is traditionally measured by the maximum or threshold-exceeding gridded precipitation of a given duration. We have developed an extreme precipitation event (EPE) algorithm that tracks entire precipitation life cycle across space and time, which enables us to characterize properties of the entire EPE, such as duration (from sub-daily to multi-day), areal coverage, and total rain volume of the event. These EPE characteristics are critical in understanding precipitation development and their interaction with large-scale meteorology, in addition, providing more comprehensive matrix for disaster management. This study examines the EPE characteristics from the tropics derived from high-resolution Integrated Multi-satellitE Retrievals fro GPM (IMERG) product. The difference between EPE characteristics between tropical land and ocean will be discussed. Large-scale meteorological control as well as convective aggregation will be studied on the impact of EPE characteristics in tropics.

Convective aggregation↗
NASA NTRS2001

A Study of Heavy Precipitation Events in Taiwan During 10-13 August, 1994: Mesoscale Model Simulations - Part 2

Several heavy precipitation episodes occurred over Taiwan from August 10 to 13, 1994. Precipitation patterns and characteristics are quite different between the precipitation events that occurred from August 10 and I I and from August 12 and 13. In Part I (Chen et al. 2001), the environmental situation and precipitation characteristics are analyzed using the EC/TOGA data, ground-based radar data, surface rainfall patterns, surface wind data, and upper air soundings. In this study (Part II), the Penn State/NCAR Mesoscale Model (MM5) is used to study the precipitation characteristics of these heavy precipitation events. Various physical processes (schemes) developed at NASA Goddard Space Flight Center (i.e., cloud microphysics scheme, radiative transfer model, and land-soil-vegetation surface model) have recently implemented into the MM5. These physical packages are described in the paper, Two way interactive nested grids are used with horizontal resolutions of 45, 15 and 5 km. The model results indicated that Cloud physics, land surface and radiation processes generally do not change the location (horizontal distribution) of heavy precipitation. The Goddard 3-class ice scheme produced more rainfall than the 2-class scheme. The Goddard multi-broad-band radiative transfer model reduced precipitation compared to a one-broad band (emissivity) radiation model. The Goddard land-soil-vegetation surface model also reduce the rainfall compared to a simple surface model in which the surface temperature is computed from a Surface energy budget following the "force-re store" method. However, model runs including all Goddard physical processes enhanced precipitation significantly for both cases. The results from these runs are in better agreement with observations. Despite improved simulations using different physical schemes, there are still some deficiencies in the model simulations. Some potential problems are discussed. Sensitivity tests (removing either terrain or radiative processes) are performed to identify the physical processes that determine the precipitation patterns and characteristics for heavy rainfall events. These sensitivity tests indicated that terrain can play a major role in determining the exact location for both precipitation events. The terrain can also play a major role in determining the intensity of precipitation for both events. However, it has a large impact on one event but a smaller one on the other. The radiative processes are also important for determining, the precipitation patterns for one case but. not the other. The radiative processes can also effect the total rainfall for both cases to different extents.

Tao, Wei Kuo↗
DOE OSTI2020

Spatiotemporal Characteristics and Propagation of Summer Extreme Precipitation Events over United States: A Complex Network Analysis

Complex Network (CN) is a graph-theory based depiction of relation shared by various elements of a complex-dynamical system such as the atmosphere. Here we applied the concept of CN to understand the directionality and topological structure of summer extreme precipitation events (SEPEs) over the conterminous United States (CONUS). The SEPEs are calculated based on the 95th percentile daily rainfall at 0.5ox0.5o spatial resolution for CONUS to investigate the multi-dimensional characteristics of precipitation extremes. The derived CN coefficients (e.g., betweenness centrality, clustering coefficient, orientation, and network divergence) reveal important structural and dynamical information about the topology of the SEPEs and improve understanding of the dominant meteorological patterns. The initiation and propagation of SEPEs from the source-zones to the sink-zones are identified. The SEPEs are influenced by topography, dominant wind patterns, and moisture sources in terms of their topological structure and spatial dynamics.

Mondal, Somnath↗
NASA NTRS1986

Spatial characteristics of observed precipitation fields: A catalog of summer storms in Arizona, Volume 1

Eight years of summer raingage observations are analyzed for a dense, 93 gage, network operated by the U. S. Department of Agriculture, Agricultural Research Service, in their 150 sq km Walnut Gulch catchment near Tucson, Arizona. Storms are defined by the total depths collected at each raingage during the noon to noon period for which there was depth recorded at any of the gages. For each of the resulting 428 storms, the 93 gage depths are interpolated onto a dense grid and the resulting random field is anlyzed. Presented are: storm depth isohyets at 2 mm contour intervals, first three moments of point storm depth, spatial correlation function, spatial variance function, and the spatial distribution of total rainstorm depth.

Fennessey, N. M.↗
NASA NTRS1986

Spatial characteristics of observed precipitation fields: A catalog of summer storms in Arizona, Volume 2

The parameters of the conceptual model are evaluated from the analysis of eight years of summer rainstorm data from the dense raingage network in the Walnut Gulch catchment near Tucson, Arizona. The occurrence of measurable rain at any one of the 93 gages during a noon to noon day defined a storm. The total rainfall at each of the gages during a storm day constituted the data set for a single storm. The data are interpolated onto a fine grid and analyzed to obtain: an isohyetal plot at 2 mm intervals, the first three moments of point storm depth, the spatial correlation function, the spatial variance function, and the spatial distribution of the total storm depth. The description of the data analysis and the computer programs necessary to read the associated data tapes are presented.

Fennessey, N. M.↗
NASA NTRS2020

Evaluating Precipitation Features and Rainfall Characteristics in a Multi‐Scale Modeling Framework

Cloud and precipitation systems are simulated with a multi‐scale modeling framework (MMF) and compared over the Tropics and Subtropics against the Tropical Rainfall Measuring Mission (TRMM) Radar‐defined Precipitation Features (RPFs) product. A methodology, in close analogy to the TRMM RPFs, is developed to produce simulated precipitation features (PFs) from the output of the embedded two‐dimensional (2D) cloud‐resolving models (CRMs) within an MMF. Despite the limitations of 2D CRMs, the simulated population distribution, horizontal and vertical structure of PFs, and the geographical location and local rainfall contribution of mesoscale convective systems (MCSs) are in good agreement with the TRMM observations. However, some model discrepancies are found and can be identified and quantified within the PF distributions. Using model biases in relative population and rainfall contributions, PFs can be characterized into four size categories: small, medium to large, very large, and extremely large. Four different major mechanisms might account for the model biases in each different category: (1) the two‐dimensionality of the CRMs, (2) a positive convection‐wind‐evaporation feedback loop, (3) an artificial dynamic constraint in a bounded CRM domain with cyclic boundaries, and (4) the limited CRM domain size. The second and fourth mechanisms tend to contribute to the excessive tropical precipitation biases commonly found in most MMFs, whereas the other mechanisms reduce rainfall contributions from small and very large PFs. MMF sensitivity experiments with various CRM domain sizes and grid spacings showed that larger domains (higher resolutions) tend to shift PF populations toward larger (smaller) sizes.

Jiun-Dar Chern↗
DOE OSTI2023

Changing Characteristics of Tropical Extreme Precipitation–Cloud Regimes in Warmer Climates

In this study, we investigated the changing characteristics of climatic scale (monthly) tropical extreme precipitation in warming climates using the Energy Exascale Earth System Model (E3SM). The results are from Atmospheric Model Intercomparison Project (AMIP)-type simulations driven by (a) a control experiment with the present-day sea surface temperature (SST) and CO 2 concentration, (b) P4K, the same as in (a) but with a uniform increase of 4K in the SST globally, and (c) the same as in (a), but with an imposed SST and CO 2 concentration from the outputs of the coupled E3SM forced by a 4xCO 2 concentration. We found that as the surface warmed under P4K and 4xCO 2 , both convective and stratiform rain increased. Importantly, there was an increasing fractional contribution of stratiform rain as a function of the precipitation intensity, with the most extreme but rare events occurring preferentially over land more than the ocean, and more so under 4xCO 2 than P4K. Extreme precipitation was facilitated by increased precipitation efficiency, reflecting accelerated rates of recycling of precipitation cloud water (both liquid and ice phases) in regions with colder anvil cloud tops. Changes in the vertical profiles of clouds, condensation heating, and vertical motions indicate increasing precipitation–cloud–circulation organization from the control and P4K to 4xCO 2 . The results suggest that large-scale ocean warming, that is, P4K, was the primary cause contributing to an organization structure resembling the well-known mesoscale convective system (MCS), with increased extreme precipitation on shorter (hourly to daily) time scales. Additional 4xCO 2 atmospheric radiative heating and dynamically consistent anomalous SST further amplified the MCS organization under P4K. Analyses of the surface moist static energy distribution show that increases in the surface moisture (temperature) under P4K and 4xCO 2 was the key driver leading to enhanced convective instability over tropical ocean (land). However, a fast and large increase in the land surface temperature and lack of available local moisture resulted in a strong reduction in the land surface relative humidity, reflecting severe drying and enhanced convective inhibition (CIN). It is argued that very extreme and rare “record-breaking” precipitation events found over land under P4K, and more so under 4xCO 2 , are likely due to the delayed onset of deep convection, that is, the longer the suppression of deep convection by CIN, the more severe the extreme precipitation when it eventually occurs, due to the release of a large amount of stored surplus convective available potential energy in the lower troposphere during prolonged CIN.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2019

Evaluating Precipitation Features and Rainfall Characteristics in a Multi-scale Modeling Framework

Cloud and precipitation systems over the tropics and subtropics are simulated with a multi-scale modeling framework (MMF) and compared against the TRMM radar precipitation features (RPFs) product. A methodology, in close analogy to the TRMM RPFs, is developed to analyze simulated cloud precipitating structures from the embedded two-dimensional cloud-resolving models (CRMs) within an MMF. Despite the two-dimensionality of the CRMs, the simulated RPFs population distribution, and horizontal and vertical structure are in good agreement with TRMM observations. However, some deficits are also found in the model simulations. The model tends to overestimate mean convective precipitation rates for RPFs with a size less than 100 km, contributing to the excessive precipitation biases in the warm pool and western Pacific, western and northern India Ocean, and eastern Pacific commonly found in most MMFs. For large features with a size greater than 150 km, both convective and stratiform rain rates are underestimated. The distribution of maximum radar echo top heights as a function of RPF size is well simulated except the model tends to underestimate the occurrence frequency of maximum heights greater than 15 km. The maximum echo top heights for convective cells embedded within large RPFs with a size greater than 150 km are also underestimated. The cyclic lateral boundary with a limited model domain generates artificial occurrences for RPFs with a size close to the model domain size, producing a significant contribution to the total rainfall due to their sizes. This cyclic lateral boundary effect can be easily identified and quantified in both probability and cumulative distribution functions of RPFs. The geophysical distribution of the population of the largest RPFs in the control experiment shows they are mainly located in the Subtropics but also partially contribute to the common MMF biases of excessive precipitation in the Tropics. Sensitivity experiments using CRMs with different domain sizes and different grid spacings show larger domains (higher resolution) tend to shift the RPFs distribution to large (small) sizes. The cyclic lateral boundary biases increase as CRM domain size decreases. The impacts of model horizontal and vertical resolution on simulated convective systems are also investigated.

Chern, Jiun-Dar↗
NASA NTRS1973

Radar/radiometer facilities for precipitation measurements

The OSU ElectroScience Laboratory Radar/Radiometer Facilities are described. This instrumentation includes a high-resolution radar/radiometer system, a fully automated low-resolution radar system, and a small surveillance radar system. The high-resolution radar/radiometer system operates at 3, 9, and 15 GHz using two 9.1 m and one 4.6 m parabolic antennas, respectively. The low-resolution and surveillance radars operate at 9 and 15 GHz, respectively. Both the high- and low-resolution systems are interfaced to real-time digital processing and recording systems. This capability was developed for the measurement of the temporal and spatial characteristics of precipitation in conjunction with millimeter wavelength propagation studies utilizing the Advanced Technology Satellites. Precipitation characteristics derived from these measurements could also be of direct benefit in such diverse areas as: the atmospheric sciences, meteorology, water resources, flood control and warning, severe storm warning, agricultural crop studies, and urban and regional planning.

Hodge, D. B.↗
NASA NTRS2000

Tornadic Supercells on May 3, 1999 Viewed from Space During an Overpass of the NASA TRMM Observatory

At approximately 04:00 UTC on 4 May (23:00 CDT on 3 May) 1999 the NASA Tropical Rainfall Measuring Mission (TRMM) Observatory made an overpass during the Central Oklahoma tornado outbreak. Supercells D4 and G5 were observed by a unique suite of scientific instruments aboard TRMM. The TRMM observatory was launched in November 1997 into a low earth orbit providing global coverage of storms from 35 degrees N latitude to 35 degrees S latitude from an altitude of 350 km. The instruments include the Lighting Imaging Sensor (LIS) which measures total lighting activity (in-cloud as well as cloud-to-ground), the TRMM Microwave Imager (TMI) which measures precipitation and cloud microphysical characteristics, the Precipitation Radar (PR) which is the first meteorological radar flown in low earth orbit, and the Visible/InfraRed Sensor (VIRS) which measures cloud top characteristics such as cloud top temperature in the visible and infrared with high (2 km) spatial resolution. Supercell D4 at Stroud, Oklahoma produced the greatest lightning rates (exceeding 225 flashes per minute) observed worldwide to date by the LIS. The presentation will present detailed satellite and ground based observations of the supercells observed during the TRMM overpass.

Goodman, Steven J.↗
NASA NTRS2000

May 3 Tornadic Supercells Viewed from Space During an Overpass of the NASA TRMM Observatory

At approximately 04:00 UTC on 4 May (23:00 CDT on 3 May) 1999 the NASA Tropical Rainfall Measuring Mission (TRMM) Observatory made an overpass during the Central Oklahoma tornado outbreak. Supercells D4 and G5 were observed by a unique suite of scientific instruments aboard TRMM. The TRMM observatory was launched in November 1997 into a low earth orbit providing global coverage of storms from 35 degrees N latitude to 35 degrees S latitude from an altitude of 350 km. The instruments include the Lightning Imaging Sensor (LIS) which measures total lighting activity (in-cloud as well as cloud-to-ground), the TRMM Microwave Imager (TMI) which measures precipitation and cloud microphysical characteristics, the Precipitation Radar (PR) which is the first meteorological radar flown in low earth orbit, and the Visible/InfraRed Sensor (VIRS) which measures cloud top characteristics such as cloud top temperature in the visible and infrared with high (2 km) spatial resolution. Supercell D4 at Stroud, Oklahoma produced the greatest lightning rates (exceeding 225 flashes per minute) observed worldwide to date by the LIS. The presentation will present detailed observations of the the supercells observed during the TRMM overpass.

Goodman, Steven J.↗
NASA NTRS1994

Energy deposition and middle atmosphere electrodynamic response to a highly relativistic electron precipitation event

Rocket data have been used to evaluate the characteristics of precipitating relativistic electrons and their effects on the electrodynamic structure of the middle atmosphere. These data were obtained at Poker Flat, Alaska, on May 13 and 14, 1990, during a midday, highly relativistic electron (HRE) precipitation event. Solid state detectors were used to measure the electron fluxes and their energy spectra. An X ray scintillator was included on each flight to measure bremsstrahlung X rays produced by energetic electrons impacting on the upper atmosphere. However, these were found the be of negligible importance for this particular event. The energy deposition by the electrons has been determined from the flux measurements and compared with in situ measurements of the atmospheric electrical response. The electrodynamic measurements were obtained by the same rockets and additionally on May 13, with an accompanying rocket. The impact flux was highly irregular, containing short-lived bursts of relativistic electrons, mainly with energies below 0.5 MeV and with fluxes most enhanced between pitch angles of 0 deg - 20 deg. Although the geostationary counterpart of this measured event was considered to be of relatively low intensity and hardness, energy deposition peaked near 75 km with fluxes approaching an ion pair production rate in excess of 100/cu cm s. This exceeds peak fluxes in relativistic electron precipitation (REP) events as observed by us in numerous rocket soundings since 1976. Conductivity measurements from a blunt probe showed that negative electrical conductivities exceeded positive conductivities down to 50 km or lower, consistent with steady ionization by precipitating electrons above 1 MeV. These findings imply that the electrons from the outer radiation zone can modulate the electrical properties of the middle atmosphere to altitudes below 50 km. During the decline and activity minimum of the current solar cycle, we anticipate the occurence of similar events but with fluxes 1-2 orders of magnitude above that reported here, based on studies of earlier solar cycles (e.g., Baker et al., 1993).

Goldberg, R. A.↗
NASA NTRS2023

Changing Characteristics of Tropical Extreme Precipitation-Cloud Regimes in Warmer Climates

In this paper, we have investigated the changing characteristics of climatic scale (monthly) tropical extreme precipitation in warming climates using the Energy Exascale Earth System Model (E3SM). Results are from Atmospheric Model Intercomparison Project (AMIP)-type simulations driven by a) control experiment with present-day sea surface temperature (SST) and CO 2 concentration, b) P4K, same as in a) but with uniform increase by 4K in SST globally, and c) same as in a), but with imposed SST and CO 2 concentration from outputs of coupled E3SM forced by 4xCO 2 concentration. We find that as the surface warms under P4K and 4xCO 2 , both convective and stratiform rain increase. Importantly, there is increasing fractional contribution of stratiform rain as a function of precipitation intensity, with the most extreme but rare events occurring preferentially over land more than ocean, more so under 4xCO 2 than P4K. Extreme precipitation is facilitated by increased precipitation efficiency, reflecting accelerated rates of recycling of precipitation-cloud water (both liquid and ice phases) in regions with colder anvil cloud tops. Changes in vertical profiles of clouds, condensation heating and vertical motions indicate increasing precipitation-cloud-circulation organization from control, P4K to 4xCO 2 . Results suggest that large-scale ocean warming, i.e., P4K, is the primary cause contributing to organization structure resembling the well-known Mesoscale Convective System (MCS) for increased extreme precipitation on shorter (hourly to daily) time scales. Additional 4xCO 2 atmospheric radiative heating, and dynamically consistent anomalous SST further amplifies the MCS organization under P4K. Analyses of the surface moist static energy distribution show that increase in surface moisture (temperature) under P4K and 4xCO 2 is the key driver leading to enhanced convective instability over tropical ocean (land). However, the fast and large increase in land surface temperature and lack of available local moisture result in strong reduction in land surface relative humidity, reflecting severe drying and enhanced convective inhibition (CIN). It is argued that very extreme and rare “record-breaking” precipitation events found over land under P4K, more so under 4xCO 2 , are likely due to the delayed onset of deep convection, i.e., the longer the suppression of deep convection by CIN, the more severe the extreme precipitation when eventually occur, due to the release of large amount of stored surplus convective available potential energy in the lower troposphere during prolonged CIN.

climate-scale extreme tropical precipitation↗
NASA NTRS2019

In-situ Mechanical Neutron Diffraction Loading Characteristics of GRCop-84 Fabricated by SLM

GRCop-84 is a precipitation strengthened alloy composed of Cu-8Cr-4Nb at % with Cr2Nb precipitates that provide dispersion and precipitation strengthening characteristics and limited solubility in the Cu matrix. The particle role of Cr2Nb(C15Laves) is unusual only contributing 1/3 of strengthening at high temperatures while the matrix provides the remainder. The particles mechanically and thermally stabilize the matrix retaining purity and preventing coarsening and loss of strength. At high temperatures (50-85%TmCu), GRCop-84 provides the best thermal and mechanical properties of available alloys. GRCop-84 is currently in development for reusable launch vehicles including the Space Launch System (SLS) with a focus on fabrication with additive manufacturing (AM) techniques. GRCop-84 is an optimal material for consolidating with AM. The base material is costly, the production times are long, and more geometry control can considerably improve cooling efficiency. Development of AMGR Cop-84 with selective laser melting (SLM) has rapidly progressed due to ease of printing and limited operator adjustment between builds, but the necessary knowledge-base of thermal history and stress state during builds is still under development.

Minneci, R.↗