SEARCH · Search NASA

Results for “processes control processes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

All sources NASA NTRS DOE OSTI

DOE OSTI2026

Electrochemical Nutrient Recovery for the Food–Energy–Water Nexus at Municipal Wastewater Facilities: Multivariate Analyses of Seasonal Sampling and Reactor Performance

Digester-equipped municipal wastewater facilities generate recycle streams with high nutrient loads that increase energy consumption and can cause environmental pollution. The reduction of these loads through electrochemical nutrient recovery (ENR) could enhance the food–energy–water nexus by producing fertilizer (struvite). This study investigated the recovery process through a 1 year sampling of recycle streams and the implementation of nutrient recovery. Time series analyses showed that P (as orthophosphate) concentration was time-variant in digester effluent streams, while N (as ammonia) concentration was time-variant in only the aerobic system. Furthermore, these two nutrient concentrations did not correlate in any of the recycle streams. Subsequent multivariate screening analyses identified anode type, NH 4 + concentration, cathodic potential, P concentration, and temperature as most significant for ENR. Finally, the optimum conditions of cathodic potential, anode area-to-volume ratio, and temperature applied to a real recycle stream resulted in 95% P recovery with 0.03 kWh/kg P. This energy consumption is significantly lower than process energy for conventional P fertilizers (1.1 kWh/kg P) and chemical recovery processes at scale (1.7–12.9 kWh/kg P). Overall, this study recommended specific process controls for nutrient recovery, expanded the variables evaluated for ENR, and demonstrated the ability to significantly impact energy demand associated with P-based fertilizers.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Real-Time KMC Simulation of Vacancy-Mediated Intermixing in Au@Ag Octahedral Core–Cubic Shell Nanocrystals with Ab Initio-Guided Kinetics

Utilization of core–shell rather than monometallic nanocrystals (NCs) facilitates fine-tuning of NC properties for applications. However, compositional evolution via intermixing can degrade these properties prompting recent experimental studies. We develop an atomistic-level stochastic model for vacancy-mediated intermixing exploiting a formalism which allows incorporation at an ab initio density functional theory level of not just the thermodynamics of vacancy formation, but also relevant diffusion barriers for a vast number of possible local environments (in the core and in the shell, at the interface, and in the intermixed phase). This facilitates a predictive treatment and comprehensive understanding of intermixing on the relevant time scale (e.g., 10 1 –10 3 s). In contrast, previous modeling at the atomistic level utilized only unrealistic generic prescriptions of barriers or employed simplified continuum treatments. For Au@Ag octahedral core–cubic shell NCs, our modeling not only captures the experimentally observed rate or time scale for intermixing of ~100 s at 450 °C for 60 nm NCs, but also elucidates the underlying rate controlling processes and the effective intermixing barrier.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

Dust Direct Radiative Effect Including Large Particles and Component Minerals

The direct radiative effect (DRE) of dust aerosols in Earth system models (ESMs) remains highly uncertain, largely due to inadequate representations of particle size distribution (PSD) and mineral composition. Using NASA's Earth Surface Mineral Dust Source Investigation (EMIT) soil mineralogy data and observed PSD in an ESM that resolves dust mineral composition and emitted diameters from 0.1 to 70 μm, we find a near-neutral global dust net DRE (−0.057 W m −2 ), weaker than most previous estimates. Large dust (diameter >10 μm) contributes 30% of the global longwave dust optical depth, providing observational constraints on large-particle abundance, and offsets 20% of the dust shortwave cooling over major source regions. Incorporation of EMIT mineralogy reduces shortwave uncertainty by more than 50%. The remaining uncertainty mainly exists in processes controlling dust abundance, particularly the poorly understood transport of large dust, and longwave optical properties, which require additional observational constraints to more accurately quantify the dust DRE.

Li, Longlei [Cornell Univ., Ithaca, NY (United Sta↗

DOE OSTI2025

Environmental Controls on Water Vapor Deuterium Excess in the Coastal Boundary Layer: An Information Theory Perspective

We use information theory to quantify the environmental controls on water vapor deuterium excess (D-excess) in coastal Southern California from June 2023 through February 2024. Using Shannon entropy, mutual information (MI), and joint mutual information, metrics that capture both linear and nonlinear relationships, we identify the most informative variables and variable combinations governing D-excess across contrasting marine and continental regimes. Relative humidity with respect to sea surface temperature (RHS) is consistently the strongest individual predictor, explaining up to 27% of D-excess variability during marine conditions but only 10% in continental air masses. The Relative humidity(RHS) + sea surface temperature (SST) combination demonstrates synergistic effects, where their joint influence (explaining up to 36% of D-excess variability) exceeds what either variable achieves individually, confirming their coupled influence on deuterium excess. Wind direction complements RHS most effectively during continental conditions. The best three-variable combination (RHS + SST + Planetary Boundary Layer height) explains 38% of D-excess variability in marine air, while no combination exceeds 20% explanatory power during continental periods. Information theory shows that heteroscedasticity in D-excess relationships indicates regime shifts in controlling processes and quantifies fundamental constraints on predictor variables: some environmental factors like surface pressure or water vapor flux contain insufficient information content to explain D-excess variability regardless of their physical relevance. These results highlight the different predictability limits between marine and continental regimes, challenging the adequacy of linear models and providing a rigorous framework for quantifying the information content of isotope-climate relationships with implications for both modern and paleoclimate applications.

information theory↗

DOE OSTI2023

Radiolytically reworked Archean organic matter in a habitable deep ancient high-temperature brine

Abstract Investigations of abiotic and biotic contributions to dissolved organic carbon (DOC) are required to constrain microbial habitability in continental subsurface fluids. Here we investigate a large (101–283 mg C/L) DOC pool in an ancient (>1Ga), high temperature (45–55 °C), low biomass (10 2 −10 4 cells/mL), and deep (3.2 km) brine from an uranium-enriched South African gold mine. Excitation-emission matrices (EEMs), negative electrospray ionization (–ESI) 21 tesla Fourier-transform ion cyclotron resonance mass spectrometry (FT-ICR MS), and amino acid analyses suggest the brine DOC is primarily radiolytically oxidized kerogen-rich shales or reefs, methane and ethane, with trace amounts of C 3 –C 6 hydrocarbons and organic sulfides. δ 2 H and δ 13 C of C 1 –C 3 hydrocarbons are consistent with abiotic origins. These findings suggest water-rock processes control redox and C cycling, helping support a meagre, slow biosphere over geologic time. A radiolytic-driven, habitable brine may signal similar settings are good targets in the search for life beyond Earth.

Science & Technology - Other Topics↗

DOE OSTI2026

Mechanical behaviour of additively manufactured metals

Additive manufacturing is reshaping the production of engineering components in diverse industries, such as the automotive, aerospace, defense, and biomedical sectors, by offering unprecedented design flexibility. The non-equilibrium processing conditions of additive manufacturing generate materials with unique microstructures and tailored mechanical properties that are often unattainable through conventional routes. This review focuses on recent advances in additively manufactured metals that demonstrate distinctive mechanical behaviors, including strength-ductility synergy, microstresses and gradient plasticity, fracture and fatigue resistance, and high-temperature creep performance. Here, we examine the mechanisms and micromechanical effects arising from the heterogeneous microstructures fabricated by additive manufacturing, to guide the design of a wide range of high-performance structural materials. Furthermore, we discuss critical research needs and emerging opportunities in process control, alloy design, advanced characterization, high-fidelity computational modeling, and machine learning aimed at achieving exceptional mechanical properties in additively manufactured metals.

Additive Manufacturing↗

DOE OSTI2025

Using chiral-induced spin selectivity as a tool to improve materials and processes for energy science

Studies relating to electrical energy conversion, storage, and generation, date back to the 19th century, however only in recent years have scientists begun to investigate the impact of the electron spin on these processes. Control and manipulation of the electron spin, an intrinsically quantum property of matter, opens new approaches to addressing energy science challenges. Furthermore, the chiral-induced spin selectivity (CISS) effect is enabling for this effort, because of the control over the transport and generation of both pure spin currents and spin-polarized charge currents. In this review article, we begin with a brief introduction on design strategies for the implementation of CISS in materials and then describe recent studies that demonstrate how CISS can be used to improve electrocatalysis and spintronics. Lastly, we conclude with forward-looking thoughts on the next steps for leveraging CISS in energy science.

Batteries↗

DOE OSTI2024

Deep learning with mixup augmentation for improved pore detection during additive manufacturing

In additive manufacturing (AM), process defects such as keyhole pores are difficult to anticipate, affecting the quality and integrity of the AM-produced materials. Hence, considerable efforts have aimed to predict these process defects by training machine learning (ML) models using passive measurements such as acoustic emissions. This work considered a dataset in which keyhole pores of a laser powder bed fusion (LPBF) experiment were identified using X-ray radiography and then registered both in space and time to acoustic measurements recorded during the LPBF experiment. Due to AM’s intrinsic process controls, where a pore-forming event is relatively rare, the acoustic datasets collected during monitoring include more non-pores than pores. In other words, the dataset for ML model development is imbalanced. Moreover, this imbalanced and sparse data phenomenon remains ubiquitous across many AM monitoring schemes since training data is nontrivial to collect. Hence, we propose a machine learning approach to improve this dataset imbalance and enhance the prediction accuracy of pore-labeled data. Specifically, we investigate how data augmentation helps predict pores and non-pores better. This imbalance is improved using recent advances in data augmentation called Mixup, a weak-supervised learning method. Convolutional neural networks (CNNs) are trained on original and augmented datasets, and an appreciable increase in performance is reported when testing on five different experimental trials. When ML models are trained on original and augmented datasets, they achieve an accuracy of 95% and 99% on test datasets, respectively. We also provide information on how dataset size affects model performance. Lastly, we investigate the optimal Mixup parameters for augmentation in the context of CNN performance.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Machine Learning for Optimized Polarization at Jefferson Lab

Polarized cryo-targets and polarized photon beams are widely used in experiments at Jefferson Lab. Traditional methods for maintaining the optimal polarization involve manual adjustments throughout data taking by human shift takers. This may introduce some level of inconsistency simply due to the wide variety of experience and expertise of the shift takers themselves. Implementing machine learning-based control systems can improve the stability of the polarization without relying on human intervention. The cryo-target polarization is influenced by temperature, microwave energy, the distribution of paramagnetic radicals, as well as operational conditions including the radiation dose. Diamond radiators are used to generate linearly polarized photons from a primary electron beam. The energy spectrum of these photons can drift over time due to changes in the primary electron beam conditions and diamond degradation. As a first step towards automating the continuous optimization and control processes, uncertainty aware surrogate models have been developed to predict the polarization based on historical data. This talk will provide an overview of the use cases and models developed, highlighting the collaboration between data scientists and physicists at Jefferson Lab.

Jeske, Torri [Thomas Jefferson National Accelerato↗

DOE OSTI2025

Quality concerns caused by quality control — deformation of silicon strip detector modules in thermal cycling tests

The ATLAS experiment at the Large Hadron Collider (LHC) is currently preparing to replace its present Inner Detector (ID) with the upgraded, all-silicon Inner Tracker (ITk) for its High-Luminosity upgrade (HL-LHC). The ITk will consist of a central pixel tracker and the outer strip tracker, consisting of about 19,000 strip detector modules. Each strip module is assembled from up to two sensors, and up to five flexes (depending on its geometry) in a series of gluing, wirebonding and quality control steps. During detector operation, modules will be cooled down to temperatures of about -35 °C (corresponding to the temperature of the support structures on which they will be mounted) after being initially assembled and stored at room temperature. In order to ensure compatibility with the detector's operating temperature range, modules are subjected to thermal cycling as part of their quality control process. Ten cycles between -35 °C and +40 °C are performed for each module, with full electrical characterisation tests at each high and low temperature point. As part of an investigation into the stress experienced by modules during cooling, it was observed that modules generally showed a change in module shape before and after thermal cycling. This paper presents a summary of the discovery and understanding of the observed changes, connecting them with excess module stress, as well as the resulting modifications to the module thermal cycling procedure.

47 OTHER INSTRUMENTATION↗

DOE OSTI2025

Second harmonic Bessel-Gauss beam shaping with elliptic axicon aberrations

The second harmonic (SH) of an axicon generated Bessel-Gauss beam is created through the nonlinear interaction of photons with a crystal, resulting in the energy doubling of the output photons. In this work, we show experimentally that in addition to frequency doubling, the SH of Bessel-Gauss beams under asymmetric aberrations from an elliptic axicon exhibit intriguing beam formation. Particularly, the central region of the SH beam profile is composed of two central spots of various geometries surrounded by nested ellipses; one of which is the configuration of two central gamma dots with similar radius knotted by nested ellipses for a zeroth-order Bessel-Gauss pump. These SH beams consistently maintain their spatial profile throughout propagation, reminiscing the behavior of screw dislocations in wave patterns. Our numerical simulations produce beam dynamics consistent with that of experiments and further implicate the remarkable interweaving of bright spots with dark vortices. This is especially noticeable when the beams dynamically oscillate along the optical axis, resulting in the genesis of spatially polarized beams with a knotted framework. The insights gained from our study establish a novel paradigm for exploring interactions of Bessel-like beams with vortex dynamics. This, in turn, has the potential to spark innovations in optical applications, fostering new methodologies to harness and manipulate complex light structures. Our experimental findings could spur new methods of generating logical states of light and new opportunities for material processing control. Published by the American Physical Society 2025

Wang, Tianhong (ORCID:0000000169104201)↗

DOE OSTI2024

Adhesion Testing of Direct-Write Printed Ink on Metallic Structural Components

The successful adoption of additive manufacturing for the rapid prototyping of direct-write printed electronics requires the establishment of quantifiable metrics that can interrogate device performance. One measure of performance is the adhesion strength between the substrate and printed film interface, which is critical since the strength of this interface can dictate the accuracy and reliability of the printed device. In this work, a non-contact laser-induced spallation technique was used to quantify the adhesion of silver printed films on aluminum alloy substrates. The laser-based method was compared to a standardized pull-off adhesion test, which provided baseline measurements of adhesion strength. The sintering conditions were shown to play an important role in the film-substrate adhesion strength, as well as the cohesion and ductility of the film itself. The methods and results described in this work support the establishment of process control steps that are necessary for quickly verifying the reliability of printed devices prior to their deployment in critical experiments.

Adhesion test↗

DOE OSTI2025

Dopant Sensitive Electrolytic Etching of Germanium with High Selectivity

Abstract The enhanced charge carrier mobility and photon absorption compared to silicon make germanium attractive for next-generation photo diodes. However, the complex oxidation behavior of germanium challenges dopant-dependent selective etching that is desired for the fabrication of backside imaging architectures. This report demonstrates electrolytic wet etching of p-doped germanium which proceeds up to 17,500x faster than etching of intrinsic germanium. Homoepitaxially grown layers of germanium were electrolytically etched in potassium hydroxide over a range of biases. Intermittent acquisition of cyclic voltammetry spectra during etching has suppressed the formation of electric double layers, maintained appreciable etch rates, and allowed for in operando process control. The observed etch rates scaled with dopant concentration. An effective etch rate of germanium removal of 2.100±0.044 µm/min was accomplished for a boron dopant concentration of 6E18cm-3. For nominally intrinsic germanium, however, an effective etch rate of only 0.00012±0.00011 µm/min was observed. A series of systematic electrolytic etch experiments have revealed the transfer of 4 electrons per germanium atom removed.

Wood, Joseph G.↗

DOE OSTI2025

Behavior of the Cadmium Pool in the INL Mk-IV Electrorefiner

The Mk-IV electrorefiner has been in service since 1996 recovering uranium from spent fuels from the Experimental Breeder Rector II and Fast Flux Test Facility sodium-cooled fast reactors. The electrorefiner vessel includes a cadmium pool beneath the salt. The voltage signal between the cadmium pool and reference electrode (Ag/AgCl type) provides information about the chemical condition of the cadmium pool with respect to uranium and zirconium saturation. This information is used to guide process control and sampling decisions. This paper describes how the voltage signal is related to chemistry by the analyses of data from Mk-IV operations and confirmatory experimentation.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2024

Interactive effects of salinity, redox, and colloids on greenhouse gas production and carbon mobility in coastal wetland soils

Coastal wetlands, including freshwater systems near large lakes, rapidly bury carbon, but less is known about how they transport carbon either to marine and lake environments or to the atmosphere as greenhouse gases (GHGs) such as carbon dioxide and methane. This study examines how GHG production and organic matter (OM) mobility in coastal wetland soils vary with the availability of oxygen and other terminal electron acceptors. We also evaluated how OM and redox-sensitive species varied across different size fractions: particulates (0.45–1μm), fine colloids (0.1–0.45μm), and nano particulates plus truly soluble (<0.1μm; NP+S) during 21-day aerobic and anaerobic slurry incubations. Soils were collected from the center of a freshwater coastal wetland (FW-C) in Lake Erie, the upland-wetland edge of the same wetland (FW-E), and the center of a saline coastal wetland (SW-C) in the Pacific Northwest, USA. Anaerobic methane production for FW-E soils were 47 and 27,537 times greater than FW-C and SW-C soils, respectively. High Fe 2+ and dissolved sulfate concentrations in FW-C and SW-C soils suggest that iron and/or sulfate reduction inhibited methanogenesis. Aerobic CO 2 production was highest for both freshwater soils, which had a higher proportion of OM in the NP+S fraction (64±28% and 70±10% for FW-C and FW-E, respectively) and organic C:N ratios reflective of microbial detritus (5.3±5.3 and 5.3±7.0 for FW-E and FW-C, respectively) compared to SW-C, which had a higher fraction of particulate (58±9%) and fine colloidal (19±7%) OM and organic C:N ratios reflective of vegetation detritus (11.4 ± 1.7). The variability in GHG production and shifts in OM size fractionation and composition observed across freshwater and saline soils collected within individual and across different sites reinforce the high spatial variability in the processes controlling OM stability, mobility, and bioavailability in coastal wetland soils.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2024

Deep learning with mixup augmentation for improved pore detection during additive manufacturing

42 ENGINEERING↗

DOE OSTI2024

Overview and Status of the Long-Baseline Neutrino Facility Far Detectors Cryogenics System

The Sanford Underground Research Facility (SURF) will host the Far Detectors of the Deep Underground Neutrino Experiment (DUNE), an international multi-kiloton Long-Baseline neutrino experiment that will be installed about a mile underground in Lead, SD. Detectors will be located inside four cryostats filled with almost 70,000 metric tons of ultrapure liquid argon, with a level of impurities lower than 100 parts per trillion of oxygen equivalent. The cryogenics infrastructure supporting this experiment is provided by the Long- Baseline Neutrino Facility (LBNF). This contribution presents modes of operation, layout and main features of the LBNF Far Detectors cryogenics system, which is composed of the following subsystems: argon receiving facilities, nitrogen system, argon distribution system, argon purification and regeneration systems, argon circulation system, argon condensers system, internal cryogenics, miscellaneous items, and process controls. An international engin eering tea m is designing these systems and will manufacture, install, test, commission, and qualify them. This contribution describes the main features, performance, functional requirements, and modes of operation of the LBNF Far Detectors cryogenics system. It also presents the status of the design, along with present and future needs to support the DUNE experiment.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2024

Studies on the Vitrification Potential of High Risk Spent Nuclear Fuels

This research explored vitrification of U-Zr nuclear fuel that exhibits an explosion hazard when processed by common nitric acid dissolution. Glass frits were chosen based on properties that had been previously measured as well as being demonstrated successfully in production at the Defense Waste Process Facility (DWPF). Zirconium and Aluminum metal powders were chosen to represent the spent fuels after literature demonstrated that the potential phase that causes the issue for explosive reaction in the effluent stream is tied to the Zirconium-III phase field. DSC measurements were carried out on various simulants and waste forms to better understand thermal behavior of these materials. Zirconium (Zr) was tested with both nitric acid and the new effluent flowsheet that is under development by the SRNL Chemical Process Control (CPC) group. The nitric acid test did show the expected exothermic behavior as well as how the behavior is affected by particle size of the powders used. In contrast, the effluent samples did not show an exothermic peak. However, the concentration of metal in the samples was orders of magnitude lower than in the nitric acid testing and further testing of the effect of concentration on the exothermicity that could be measured confirmed a dampened signal. Tests were run that included frit, both DWPF Frit 510 and Iron Phosphate frit, exhibiting complex curves that included multiple endothermic and exothermic peaks during heating and cooling. The final crucible samples appear similarly to the bulk glasses pointing to these peaks being a part of the dissolution of the simulant into the base glasses.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗