Search NASA⌕ Search

SEARCH · Search NASA

Results for “pyrolysis chemistry”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Heterogeneous Diels–Alder tandem catalysis for converting cellulose and polyethylene into BTX

Producing biomass-derived aromatic hydrocarbons via controllable Diels–Alder reactions is a promising approach to recover energy and chemicals from waste streams. A tandem Diels–Alder catalysis consisting of SAPO-34 and Fe/HZSM-5 (stacked catalysis or mixed catalysis) was evaluated for thermochemical conversion of cellulose and polyethylene blends into benzene, toluene, and xylenes (BTX). Aromatization catalyst type significantly affected the activity of tandem catalysis, and the BTX obtained from the HZSM-5 stacked catalysis was ~2.3 times higher than that of the USY stacked one. An introduction of Fe active promoters into HZSM-5 increased the Lewis to Brønsted acid sites molar ratio (L/B) from 0.4 to 4.1. The comparison between Fe/HZSM-5 stacked catalysis and parent HZSM-5 single catalysis indicated that the former was more effective for BTX production, obtaining a nearly two-fold increase in yield with a high selectivity of 82.8%. A close proximity between Fe/HZSM-5 and SAPO-34 in the mixed catalysis increased the BTX enhancement to 1.8. A synergistic effect was provided by the coordination of Lewis and Brønsted acid sites in the Fe/HZSM-5 mixed catalysts for facilitating BTX generation, achieving a maximum of 25.9% at a Fe/HZSM-5 to SAPO-34 mass ratio of 1:1 with a theoretical L/B of 7.2. Finally, this work provides a sustainable strategy to produce biomass-derived aromatic hydrocarbons.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Conversion of Phenolic Oil from Biomass Pyrolysis into Phenyl Esters

Bio-oil is among the most economical approaches for advanced biofuel production. However, bio-oil faces several challenges including high acidity and viscosity, poor storage, and thermal stability. This study focuses on the upgradation of lignocellulosic (corn stover and yellow pine) bio-oil derived phenolic oil (PO), produced by the autothermal fast pyrolysis, through acid-catalyzed esterification reaction. Our strategy exploits a little recognized chemistry: the Fischer esterification of PO and carboxylic acids into carboxylic acid phenyl esters (CAPE) using Dean Stark distillation. Analyses by the Folin–Ciocalteu method, Karl Fischer titration, gas chromatography flame ionization detector, and the molecular weight determination by gel permeation chromatography suggest the conversion of 50 wt% added phenolics to their corresponding CAPE. The Fourier transform infrared spectroscopy analysis confirmed the formation of new C=O and two C–O stretching bands and decrease in the intensity of phenolic-OH bands in the CAPE. The 13 C NMR analysis supports the formation of CAPE together with some unreacted precursors. A base-catalyzed ester hydrolysis experiment and mass balance calculation show an excellent agreement (within 5% range) of the equivalent weight between the produced ester and the phenyl hexanoate. Brookfield analysis indicates that CAPE has 330-fold lower viscosity than starting PO. Heating values of CAPE were higher than PO, from which they were derived (42.2 and 43.6%, respectively, for PO from pyrolysis of corn stover and yellow pine), while moisture content decreased by 98.3 and 98.7%, respectively. The CAPE, which is a phenolic analogue of methyl esters used in biodiesel, has improved stability compared to PO from which it was derived.

42 ENGINEERING↗
DOE OSTI2021

Optimizing Process Conditions during Catalytic Fast Pyrolysis of Pine with Pt/TiO 2 —Improving the Viability of a Multiple-Fixed-Bed Configuration

Catalytic fast pyrolysis (CFP) has been identified as a promising pathway for the production of renewable fuels and co-products. However, continued technology development is needed to increase process efficiency and reduce process costs. This report builds upon previous research in which a bifunctional metal–acid Pt/TiO 2 catalyst was utilized in a fixed-bed reactor operated with co-fed H 2 to improve product yield and reduce coke generation compared to conventional CFP methods. Here, we report further process optimization, in which we achieved similar CFP oil carbon efficiency (>35%) and CFP oil oxygen content (<20 wt %) to our previous report while reducing catalyst and equipment costs by increasing time-on-stream between regenerations by 40–95% and decreasing required regeneration time by more than a factor of 2. These process improvements were achieved by conducting parameter sweeps to determine optimum conditions for CFP and regeneration with key variables including pyrolysis temperature, catalytic upgrading temperature, hydrogen partial pressure, and regeneration oxygen concentration. Coupled with comprehensive oil analyses, these data provide foundational insight into the deoxygenation and coking chemistries for CFP under realistic process conditions while also advancing the technology through applied engineering.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Experimental determinations of carbon and hydrogen isotope fractionations and methane clumped isotope compositions associated with ethane pyrolysis from 550 to 600°C

Methane clumped isotope compositions signify the relative natural abundances of rare, doubly substituted isotopic species of methane ( 13 CH 3 D and 12 CH 2 D 2 ) and have emerged as a new isotopic tool to trace the sources, sinks, and lifecycles of methane in the environment. Such measurements can identify equilibration (or reequilibration) temperatures if found to be in isotopic equilibrium or non-equilibrium processes (e.g., kinetically controlled reactions or mixing) if not in isotopic equilibrium. Naturally occurring thermogenic methane—formed by the thermally activated breakdown of larger organic molecules—has been found to have clumped isotope compositions consistent with equilibrium at reasonable gas formation temperatures in some settings and non-equilibrium processes occurring during either formation, migration, storage, or extraction in others. To explore the potential controls on the isotopic composition of thermogenic methane, we conducted isothermal time-series ethane pyrolysis experiments at 550 and 600 °C to measure methane and ethane 13 C/ 12 C and D/H fractionations and methane clumped isotope compositions (resolved 13 CH 3 D and 12 CH 2 D 2 ). We explore the effects of modifying the initial clumped isotope composition of ethane and the addition of water vapor to pyrolysis experiments. We observe that ethane and methane 13 C/ 12 C are controlled by kinetic isotope effects and Rayleigh distillation processes. In contrast, ethane and methane D/H and methane clumped isotope compositions appear to be controlled by a combination of these processes and hydrogen isotope exchange. The hydrogen isotope exchange processes lead to isotopic equilibrium as reaction completion is approached for both D/H (ethane/methane) and methane clumped isotope compositions. Here, we develop a chemical model based on a mass balance approach that accounts for inheritance vs. hydrogen-abstraction formation pathways for singly and doubly substituted isotopologues of ethane and methane that is compared to the experimental data. The model allows the determination of carbon and hydrogen kinetic isotope effects associated with ethane cracking and hydrogen abstraction reactions that, where applicable, we compare to prior theoretical constraints. From the comparison of the model to the experimental data, we infer that the kinetically controlled ethane and methane bulk isotope compositions and methane clumped isotope compositions are controlled by kinetic isotope effects (both primary and secondary) associated with both C–C bond and C–H bond cleavage reactions. Specifically, the methane clumped isotope compositions likely result from a combination of clumped isotope effects associated with ethane breakdown and/or assembly of methane isotopologues (expressed in terms of γ-factor parameters ≠ 1) and combinatorial effects that arise probabilistically. We discuss our experimental results in the context of recent pyrolysis experiments and observations of naturally occurring thermogenic methane. We consider a proposal consistent with observations from nature that the hydrogen isotope exchange reactions that promote equilibration of methane isotopic molecules at or near formation temperature may be facilitated by free radicals generated by pyrolysis reactions. In this framework, isotope exchange effectively ceases when pyrolysis effectively ceases locking in compositions that can be consistent with peak formation temperatures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Low-Temperature Plasma Assisted Kinetics Study of Ethanol

Non-equilibrium plasma assisted kinetics of ethanol at 0.5 atm over a temperature range of 523-1203 K were studied at stoichiometric conditions by using a plasma flow reactor (PFR). The effects of plasma chemistry on fuel and its influence on neutral chemistry is decoupled with both experimental and modelling efforts. Enhanced reactivity was observed experimentally in both plasma-assisted oxidation and pyrolysis cases with fuel consumption beginning at temperatures as low as 523 K. Absolute fuel consumption was observed at temperatures nearly 200 K earlier than pure thermal reactions highlighting the effectiveness of non-equilibrium plasma to promote reactivity. Furthermore, modelling results illustrated the effect of electron impact reactions towards accelerating fuel consumption and promoting low temperature chemistry by generating excited state N2 and reactive O and OH radicals.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2022

CFD-DEM Modeling of Autothermal Pyrolysis of Corn Stover with a Coupled Particle- and Reactor-Scale Framework

Autothermal operation of fast pyrolysis is an efficient process-intensification technique wherein exothermic oxidation reactions are used to overcome the heat-transfer bottleneck of conventional pyrolysis. The development of accurate, reliable modeling toolsets is imperative to generating a deeper understanding of biomass autothermal pyrolysis systems to support scale-up and industrial deployment. This modeling effort describes the development of single-particle and reactor models which incorporate detailed reaction schemes and simultaneous exothermic oxidation reactions. The particle-scale model was parameterized for corn stover feedstock with particle morphology, density, ash content, and biopolymer composition, all of which impact the emergent conversion characteristics during pyrolysis. Results were then used to parameterize a reactor-scale autothermal pyrolysis model, which was developed using a coarse-grained computational fluid dynamic-discrete element method. The simulation results compared well with experimental results, with the predicted bio-oil, light gas, and biochar yield within 3.0 wt% of the experimental yields. Further analyses were performed to test the influence of equivalence ratio, biomass injection position, and particle size distribution on autothermal pyrolysis. The analysis of the physio-chemical properties of the fluid and solid phase inside the reactor and at the reactor outlet help reveal important process interactions of autothermal pyrolysis.

BIOMASS FUELS,INORGANIC, ORGANIC, PHYSICAL, AND AN↗
DOE OSTI2021

An approach to identifying fibers and evolved compounds from flame resistant fabrics

Flame resistant (FR) fabrics have use in civilian, military, and industrial applications. Herein, this work describes the development of a methodology aimed at identifying the fiber composition of blended fabrics of unknown composition. Here, FR fabrics used in military uniforms, are studied using a combination of X-ray photoelectron spectroscopy (XPS), isothermal thermogravimetric analysis (TGA) and pyrolysis gas chromatography/mass spectrometry (Py-GC-MS). Elemental analysis of the fabrics using XPS yielded a preliminary determination of the composition of the polymer(s) and aided in the identification of FR additives. TGA and Py-GC-MS experiments were used for subsequent compound identification. In TGA the temperature of mass loss events was compared to reference materials, and in Py-GC-MS the pyrolysis products of the blended FR fabrics were compared to those from a series of potential parent fibers. It was possible to discern the composition of the parent fibers and the type of FR treatment added to fabrics because the thermal decomposition chemistry did not significantly change by blending the fibers to make fabrics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Sequential Ammonia and Carbon Dioxide Adsorption on Pyrolyzed Biomass to Recover Waste Stream Nutrients

Untreated fecal waste in unsewered communities and reactive nitrogen (N) loading from wastewater and urine disposal are important environmental challenges. Through pyrolysis, untreated fecal waste can be converted into amine-rich carbon dioxide (CO 2 ) sorbents, the chemisorption of which tunes the surface chemistry toward ammonia (NH 3 ) uptake. We compared the N-loading potential within amine-rich pyrolyzed human solid waste through exposure to CO 2 followed by NH 3 with the N-loading potential on carboxyl-rich, pyrolyzed oxidized wood using sequential adsorption of isotopically labeled CO 2 and NH 3 . The total N content of pyrolyzed oxidized wood exposed once to NH3 was similar to native, pyrolyzed human solid waste (3.7% compared to 4.6%). However, sorption kinetics and spectroscopic evidence revealed distinct N forms between the two materials affecting subsequent CO 2 and NH 3 uptake. Tertiary amines comprised 70% of N in pyrolyzed waste, compared to only 53% in pyrolyzed oxidized wood. The high heat of adsorption of CO 2 on pyrolyzed human solid waste (50 kJ mol-1) at low concentrations (0.05 mmol CO 2 g -1 ) was indicative of CO 2 reactivity with tertiary amines, consistent with the formation of carbamic acid (Figure S1). Conversely, after exposure to NH 3 , pyrolyzed oxidized wood chemisorbed CO 2 at much higher concentrations (0.7 mmol CO 2 g-1), pointing to primary amines as the active functional moieties. Adsorption kinetics of pyrolyzed oxidized wood revealed continued, albeit diminishing NH 3 uptake with each consecutive CO 2 treatment, averaging 5.9 mmol NH 3 g -1 for the first NH 3 exposure event, and still 3.5 and 2.9 mmol NH 3 g -1 for the second and third. Penetration of 15 NH 3 and 13 CO 2 measured by NanoSIMS reached over 7 µm deep into both materials, explaining the large NH 3 capture. The significantly lower NH 3 adsorption compared to pyrolyzed oxidized wood may be a result of potassium (K) carbonate precipitation precluding a Lewis base interaction between NH 3 and chemisorbed CO 2 , suggested by a 2-fold increase in surface K concentrations after exposure of pyrolyzed human solid waste to CO 2 +NH 3 detected by XPS.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Product specific thermal degradation kinetics of bisphenol F epoxy in inert and oxidative atmospheres using evolved gas analysis–mass spectrometry

Knowledge of the degradation kinetics for polymer materials is important for understanding thermal stability. In this study, evolved gas analysis–mass spectrometry and pyrolysis gas-chromatography-mass spectrometry were evaluated for the potential to deliver additional insight into thermal degradation kinetics of diglycidal ether of bisphenol F (DGEBF) epoxy thermoset under inert and oxidative atmospheres. Degradation products of selected precursor ions were evaluated for their uniqueness to the specific precursor using extracted ion thermographs. Unique mass peaks, solely attributed to a single reaction pathway of a specific product, were determined from extracted ion thermographs and used to determine both activation energy (E a ) and pre-exponential factors for the specific primary reaction pathways. These primary reaction pathways for DGEBF epoxy degradation were then evaluated in the context of transition state theory (TST) and related transition state enthalpies (ΔH ‡ ) and entropies (ΔS ‡ ) of activation to further elucidate the degradation process. It was determined under pyrolysis conditions, as suggested by the E a , the formation of bisphenol F monomer was the rate-limiting step toward the formation of xanthene and phenol. In contrast, under thermo-oxidative conditions, reactions involving oxygen containing species were identified as the rate-limiting step for all observed products based on the large negative ΔS ‡ calculated from TST. This work demonstrates a powerful combination of technique and theory that can provide new insight into the degradation of polymer materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Simulations of biomass pyrolysis using glued-sphere CFD-DEM with 3-D intra-particle models

The shape of biomass particles influences intra-particle heat transfer, particle-particle collisions, interphase momentum, heat transfer, and pyrolysis yield. In this research, the effects of these multi-scale phenomena are captured using a glued-sphere computational fluid dynamic discrete element method (CFD-DEM) with 3-D intra-particle models. The glued-spheres resolved the shapes of particles and intra-particle temperature and species distributions. The implementation was validated using the pyrolysis data of a spherical particle and a cylindrical particle. Then, the influences of biomass shapes and sizes on pyrolysis were investigated. The results revealed the significant influence of surface areas and mass distributions on interphase heat transfer and chemical reactions. The intra-particle heat transfer is neglectable for a Biot number smaller than 0.41. Finally, the pyrolysis of irregularly shaped biomass particles in a fixed bed, fluidized bed, and spouted bed was simulated. Analysis of conversion distributions showed the largest deviations in the fixed bed and the slowest conversion rate in the spouted bed. A good balance between uniform and fast conversion is achieved in the fluidized bed. The multi-scale method proposed in this research provides a tool for the evaluation of large irregular-shaped biomass particle pyrolysis in different types of reactors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Methane Catalytic Pyrolysis by Microwave and Thermal Heating over Carbon Nanotube-Supported Catalysts: Productivity, Kinetics, and Energy Efficiency

Methane catalytic pyrolysis, which is the reaction to produce hydrogen and carbon without emitting CO 2 , represents an approach for decarbonization using natural gas as an energy resource. In this work, the endothermic pyrolysis reaction was carried out under two heating scenarios: convective thermal heating and microwave-driven irradiative heating. The pyrolysis reaction was conducted at 550-600 °C over carbon nanotube-supported Ni-Pd and Ni-Cu catalysts. On both catalysts, an enhanced methane conversion rate was observed under microwave irradiation. The enhanced catalytic activity was hypothetically caused by the presence of free electrons in the carbon atoms within CNT that enabled the CNT support to absorb microwave energy effectively and to be heated efficiently by microwave. The microwave catalytic pyrolysis has shown improvement in kinetics, where the apparent activation energy dropped from 45.5 kJ/mol under conventional convective heating to 24.8 kJ/mol under microwave irradiation. When the methane conversion rate is increased by 37 %, the microwave power consumption only changed by 10.8 %. The research demonstrated the potential of transforming natural gas to clean hydrogen and value-added carbon in a more energy-efficient way. Process simulation and techno-economic analysis showed that potentially hydrogen minimum selling price of about $1 /kg H 2 could be achieved.

03 NATURAL GAS↗
DOE OSTI2023

Advanced Analytical Methodologies Enable Feedstock Screening and Correlation to Pyrolysis Yields and Catalytic Upgrading

Pyrolysis of lignocellulosic biomass can serve as a powerful pathway for the generation of renewable fuels and industrial products. However, procurement of some biomass may be costly, especially when there is competition for alternative uses. Forestry and agricultural byproducts may serve as valuable pyrolysis feedstocks due to their high availability and low cost. Although waste products may fill demand for affordable pyrolysis feedstocks, they are often high in ash and extractives which contribute to unfavorable changes in pyrolysis vapor composition, as well as end products. The work presented here investigates the correlations between various pine anatomical fractions to understand their effect on pyrolysis oil composition for forest residues. Analytical pyrolysis coupled to direct analysis by molecular beam mass spectrometry (MBMS) provides real-time monitoring of pyrolysis vapor composition, even for compounds that are not amenable to gas chromatography. Statistical analysis of MBMS data from the fast pyrolysis (FP) of clean pine, cambium, twigs and branches, needles, bark, and a forest residue samples revealed that bark and needles made the greatest differences in the vapor composition of forest residues during pyrolysis and were enriched in resin acids, furfural derivatives, and ions that have been previously observed from catalysis corresponding to ash content. These results were also compared to catalytic fast pyrolysis (CFP) using a platinum on titania catalyst, and correlations between FP and CFP products were observed for the anatomical fractions. The forest residues and corresponding anatomical fractions from a stand of 23-year-old pine will be converted by fast pyrolysis in a bench-scale 2-inch fluidized-bed reactor, and statistical correlations between the bench-scale products and analytical-scale pyrolysis vapors will be shown. This work highlights the power of advanced analytical methodologies in determining the contributions of vapor components to catalytic pyrolysis outcomes for mixed feedstocks and demonstrates the use of analytical methodologies to better screen feedstocks prior to pyrolysis.

analytical↗
DOE OSTI2020

Bridging particle and reactor scales in the simulation of biomass fast pyrolysis by coupling particle resolved simulation and coarse grained CFD-DEM

Efficient utilization of biomass is challenging due to the complexity of the feedstock at molecular, particle, and reactor scales. Direct coupling of particle scale model and reactor scale simulation is computationally infeasible. In this work, the results from a particle resolved simulation were used to calibrate the heat transfer and reaction kinetics of particles. A hybrid drag model was used to consider the different fluidization properties of sands and biomass particles. The computation cost was reduced using a coarse-grained Discrete Element Method (DEM). The simulated conversion rate, char yield, tar yield, and pyrolysis gas yield compare well with experiment. The residence time and axial distributions of biomass were also analyzed. This novel multi-scale method provides an efficient and accurate tool for the modeling of biomass pyrolysis reactors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Modelling the ejection of primary aerosols during the fast pyrolysis of biomass anisotropic particles

A model for the fast pyrolysis of anisotropic biomass particles is presented which considers bubbling dynamics within the liquid intermediate phase (metaplast) and aerosol ejection from this phase. The model employs the population balance equation and the method of moments to estimate the production rate and resultant size distribution of aerosol ejections, incorporating a detailed CRECK reaction mechanism, and considers the effect of anisotropic biomass microstructure on the intraparticle transport of mass and energy. Here, this study investigates the impact of particle size, heating rate (heat transfer coefficient), and lignocellulosic composition on aerosol ejection. The model predicts that, at high heating rates (convective heat transfer coefficient of 359 W/m 2 .K), aerosols can contribute over 20% to the heavy fraction yield in bio-oil for small particles (1 mm diameter, 4 mm length). The model can predict aerosol size distribution and surface area, indicating an average size of 20 μm for bubbles and 5 μm for aerosols during increased bubble production and aerosol ejection rates. These findings are consistent with prior experimental results and provide essential information for future modeling of extra-particle reactions of the aerosols as they progress through the reactor.

09 BIOMASS FUELS↗
DOE OSTI2021

Assessment of a Detailed Biomass Pyrolysis Kinetic Scheme in Multiscale Simulations of a Single-Particle Pyrolyzer and a Pilot-Scale Entrained Flow Pyrolyzer

A detailed biomass pyrolysis kinetic scheme was assessed in the multiscale simulations of a single-particle pyrolyzer with slow pyrolysis and a pilot-scale entrained flow pyrolyzer with fast pyrolysis. The detailed kinetic scheme of biomass pyrolysis developed by the CRECK group consists of 32 reactions and 58 species. A multiscale simulation model was developed, where the CRECK kinetics was employed to simulate biomass pyrolysis reactions, a one-dimensional particle model was utilized to simulate the intraparticle transport phenomena, and the particle-in-cell (PIC) model was employed to simulate the hydrodynamics. The multiscale model was first applied to simulate a single-particle pyrolysis experiment. The simulation with nonisothermal particles matched the experimental data better than the simulation with isothermal particles. Then the multiscale model was applied to simulate the pilot-scale entrained flow pyrolyzer. In this case, the simulation with isothermal particles matched the experimental data better than the simulation with nonisothermal particles. The reason for this difference might be that the kinetics itself already partially included the intraparticle transport effect as it was fitted using both TGA data (slow pyrolysis of small size biomass) and fluidized bed data (fast pyrolysis of relatively large size biomass). This study provides some insights into biomass pyrolysis kinetics development and pyrolyzer multiscale simulation for a future study.

09 BIOMASS FUELS↗
DOE OSTI2021

Diol isomer revealed as a source of methyl ketene from propionic acid unimolecular decomposition

Carboxylic acids are important combustion intermediates, especially regarding the combustion of oxygenates such as ethyl esters. The purpose of this study is to discern the unimolecular decomposition pathways of one such carboxylic acid, propionic acid, using microreactor flow experiments with line-tunable photoionization mass spectrometry and infrared spectroscopy, along with high-level electronic structure calculations (CCSD(T)/cc-pV∞Z//M06-2X/cc-pVTZ level of theory) and master equation theory. Here, microreactor experiments were performed at 300–1500 K, pressures decreasing from roughly 300 Torr to vacuum pressure, and around 100 μs residence times. Primary products are methyl ketene, ketene, ethylene, and methyl radical. Theory suggests the two lowest energy bond fissions are active at these conditions and responsible for the production of ketene, methyl radical, and some ethylene. Importantly, theory revealed the significance of the isomerization of propionic acid to propene-1,1-diol, and the subsequent dehydrogenation reaction of the diol as an alternative explanation for the unimolecular formation of methyl ketene. This is predicted to be the dominant thermal decomposition pathway at lower temperatures (up to ~850 K). Line-tunable VUV photons allowed for isomer resolution of the products and showed no evidence of the diol of propionic acid surviving until detection, suggesting propene-1,1-diol decomposes either to methyl ketene and water rapidly, fragments upon ionization to a distonic ion inseparable from methyl ketene through our detection methods, or never stabilizes as propionic acid well-skips directly to methyl ketene. Infrared spectroscopy showed no evidence of the decarboxylation of propionic acid at these conditions. Updated rate constants and branching ratios for propionic acid decomposition are calculated and provided for future modeling studies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗