Search NASA⌕ Search

SEARCH · Search NASA

Results for “reactions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Acetic Acid Adsorption and Reactions on Ni(110)

Acetic acid adsorption and reactions at multiple surface coverage values on Ni(110) were studied with temperature-programmed desorption (TPD) and infrared reflection absorption spectroscopy (IRAS) at 90–500 K. The experimental measurements were interpreted with density functional theory (DFT) calculations that provided information on adsorbate geometries, energies, and vibrational modes. Below the monolayer saturation coverage of 0.36 ML at 90 K, acetic acid adsorbs mostly molecularly. Above this coverage, a physisorbed layer is formed with dimers and catemers, without detectable monomers. Dimers and catemers desorb as molecular acetic acid at 157 and 172 K, respectively. Between 90 and 200 K, the O–H bond in acetic acid breaks to form bridge-bonded bidentate acetate that becomes the dominant surface species. Desorption-limited hydrogen evolution is observed at 265 K. However, even after the acetate formation, acetic acid desorbs molecularly at 200–300 K due to recombination. Minor surface species observed at 200 K, acetyls or acetates with a carbonyl group, decompose below 350 K and generate adsorbed carbon monoxide. At 350 K, the surface likely undergoes restructuring, the extent of which increases with acetic acid coverage. The initial dominant bridge-bonded bidentate acetate species formed below 200 K remain on the surface, but they now mostly adsorb on the restructured sites. Here, the acetates and all other remaining hydrocarbon species decompose simultaneously at 425 K in a narrow temperature range with concurrent evolution of hydrogen, carbon monoxide, and carbon dioxide. Above 425 K, only carbon remains on the surface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Highly Durable and Active Pt/Sb-Doped SnO 2 Oxygen Reduction Reaction Electrocatalysts Produced by Atomic Layer Deposition

Platinum supported on mixed-metal oxides (MMOs) are a class of active and durable cathode catalysts for proton exchange membrane fuel cell (PEMFC) due to a combination of the high oxidative stability of the supports and strong-metal-support interactions (SMSI) that enable them to exceed the activity of Pt/C. Herein, we solve a significant remaining challenge with Pt/MMO systems, namely the relatively low surface area and porosity. This is achieved by dispersing nearly-uniform Pt clusters using atomic layer deposition (ALD) on highly conductive (6.2 S/cm) and stable antimony doped tin dioxide (ATO) support. ALD-Pt/ATO exhibited significantly higher electrochemically active surface area (ECSA) (74 m 2 /g) and oxygen reduction reaction (ORR) catalytic activity (102 mA/mg Pt at 0.9 V vs. RHE) compared to Pt/ATO synthesized using ethylene glycol (ECSA=31 m 2 /g Pt , mass activity=52 mA/mg Pt at 0.9 V vs. RHE) and formic acid reduction methods (ECSA=28 m 2 /g Pt , mass activity=46 mA/mg Pt at 0.9 V vs. RHE). Further characterization showed that wet chemical methods resulted in poorer Pt particle dispersion, poor control over Pt particle size distribution and chemical degradation of the support (during Pt deposition). Given the near-ideal Pt particle size distribution of the ALD-Pt/ATO, particle size growth and loss of ECSA was found to be minimal over the course of rigorous potential cycling. Thus, after 10,000 potential cycles between 1V and 1.5V vs. RHE, ALD-Pt/ATO and other Pt/ATOs were found to retain 100% of their initial ECSA compared to 57.6% retention for Pt/C. Upon testing in a H 2 /air PEMFC, following 1,000 potential cycles, the change in ALD-Pt/ATO performance was negligible while Pt/C exhibited a 68.2% loss of initial peak power density. Thus, ALD-Pt/ATO is an active and highly durable ORR electrocatalyst in PEMFCs under start-up-shut down conditions.

25 ENERGY STORAGE↗
DOE OSTI2020

Enhancement of high-temperature selectivity on Cu-SSZ-13 towards NH3-SCR reaction from highly dispersed ZrO2

ZrO2 is introduced as a secondary phase to Cu-SSZ-13 via different approaches and tested for the NH3-SCR reaction. It is shown that the vicinity between the two catalyst phases, i.e., ZrO2 dispersion, influences interaction between copper oxide (CuOx) on Cu-SSZ-13 and ZrO2. A strong interaction is achieved when ZrO2 is formed with high dispersion on Cu-SSZ-13, and leads to the chemical interaction of CuOx and ZrO2 in hydrothermally aged catalysts. The result is formation of a Cu-stabilized t-ZrO2 phase which greatly hinders the non-selective NH3 oxidation due to CuOx. With reduced ZrO2 dispersion and less Cu-SSZ-13 and ZrO2 interaction, the beneficial role of ZrO2 is diminished. This strategy of CuOx passivation is able to significantly enhance the high-temperature selectivity of the state-of-the-art NH3-SCR catalytic system while mitigating the adverse impact of CuOx clusters on the zeolite, potentially enabling higher Cu-content SCR catalysts and improved low-temperature activity.

NH3-SCR, ZrO2, selective catalytic reduction, afte↗
DOE OSTI2025

Ethyl transfer reactions of NaBEt 4 with Cp*Rh(PMe 3 )PhBr and elimination reactions

The reaction of NaBEt 4 with Cp*Rh(PMe 3 )PhBr produces Cp*Rh(PMe 3 )PhEt by ethyl transfer. Single crystal X-ray analysis shows a typical piano-stool geometry. This compound reacts photochemically (λ > 320 nm) to give Cp*Rh(PMe 3 )PhH as the major product, plus ethylene. A secondary product was assigned as the square planar complex RhPh(PMe 3 )(η 4 -C 5 Me 5 Et) on the basis of NMR spectroscopy. Finally, the molecule decomposes over several days at ambient temperature, releasing C 5 Me 5 Et.

02 PETROLEUM↗
DOE OSTI2022

p-Block Metal Oxide Noninnocence in the Oxygen Evolution Reaction in Acid: The Case of Bismuth Oxide

The Pourbaix diagrams of p-block Pb, Sb, and Bi establish a robust stability for their oxides in acidic solutions. Such oxides have found utility as stable frameworks to support metals that are active for oxygen evolution reaction (OER) catalysis, but they also possess two-electron redox couples, which can potentially engender OER activity. Thus, the use of p-block oxide supports provides an imperative for understanding the OER activity of the unary oxides. Toward this end, we report BiO x films that are able to perform OER catalysis at moderate overpotentials for extended periods of operation (>110 h) in highly acidic solutions (pH 1.0–2.25) with no sign of decreased OER activity during operation at current densities of 1–5 mA cm –2 . X-ray photoelectron spectroscopy (XPS), cyclic voltammetry (CV), and UV-vis spectroelectrochemistry reveal a change in the Bi oxidation state prior to OER catalysis, from predominantly Bi 3+ in the as-deposited films to primarily Bi 5+ in the catalytically active films. Furthermore, this transformation is accompanied by a prominent color change from orange to dark brown. Simulations of the cyclic voltammogram catalytic profiles suggest two OER pathways for BiO x involving Bi IV O x and Bi V O x catalysts with the Bi V O x pathway prevailing after catalyst activation. Together, these results demonstrate the ability of BiO x to facilitate OER in acid with high functional stability and underscore the noninnocent role that p-block metal oxides may play in OER catalysis in acidic media.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Spin-Selective Oxygen Evolution Reaction in Chiral Iron Oxide Nanoparticles: Synergistic Impact of Inherent Magnetic Moment and Chirality

Electron spin polarization is identified as a promising avenue for enhancing the oxygen evolution reaction (OER), which is the bottleneck that limits the energy efficiency of water-splitting. Here, in this work, we report that both ferrimagnetic (f-Fe 3 O 4 ) and superparamagnetic iron oxide (s-Fe 3 O 4 ) catalysts can exhibit external magnetic field (Hext)-induced OER enhancement, and the activity is proportional to their intrinsic magnetic moment. Additionally, the chirality-induced spin selectivity (CISS) effect was utilized in synergy with Hext to get a maximum enhancement of up to 89% improvement in current density (at 1.8 V vs RHE) with a low onset potential of 270 mV in s-Fe 3 O 4 catalysts. Spin polarization and the resultant spin selectivity suppress the production of H 2 O 2 and promote the formation of ground state triplet O 2 during the OER. Furthermore, the design of chiral s-Fe 3 O 4 with synergistic spin potential effect demonstrates a high spin polarization of ∼42%, as measured using conductive atomic force microscopy (c-AFM).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Glassy Carbon Substrate Oxidation Effects on Electrode Stability for Oxygen Evolution Reaction Catalysis Stability Benchmarking

Employing benchmarking metrics to capture the activity and stability of electrocatalysts for the oxygen evolution reaction (OER) in acid is a critical practice that enables meaningful comparison of catalyst material candidates reported throughout the literature. In this work, we find that ubiquitously used glassy carbon electrode substrates oxidize under typical OER operating conditions, forming a pacified, electrically insulating, and oxygen-rich surface layer that causes drastic loss of current density over the course of extended chronoamperometric stability tests at an anodic potential of 1.7 VRHE. We show that the experimentally observed stability of glassy carbon-based electrodes is approximately two orders of magnitude lower than that expected solely from dissolution-based catalyst intrinsic stability of Ir-based catalysts. We additionally find that glassy carbon-based electrode stability measured by chronoamperometric holds is greatly impacted by catalyst loading, with high catalyst loadings improving the stability of the overall electrode via a protective effect on the glassy carbon substrate. Altogether, our investigation highlights that glassy carbon is not electrochemically inert under OER conditions on the timescale of common stability tests, which can cause electrodes to exhibit performance losses that do not reflect the intrinsic stability of the actual catalyst material being investigated. In light of our findings, we underscore the usefulness of metrics, such as the S-number, to reflect intrinsic catalyst material stability.

25 ENERGY STORAGE↗
DOE OSTI2022

Benchmark and Assessment of the Surrogate Reaction Method for Determining Unknown (n,n') and (n,2n) Reaction Cross Sections

A new approach for determining (n,n' ) and (n,2n) cross sections from a combination of indirect measurements and theory is presented. The method builds on and significantly extends the surrogate reactions framework developed at LLNL. Multiple theory advances are described and the overall approach is demonstrated through an application to benchmark cross sections. The work addresses nuclear data needs of the Stockpile Stewardship Program (SSP) and this report comprises multiple completion criteria for an ASC/PEM Level-2 milestone.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗