Search NASASearch

SEARCH · Search NASA

Results for “recognition analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Recognition of surface lithologic and topographic patterns in southwest Colorado with ADP techniques

Analysis of ERTS-1 multispectral data by automatic pattern recognition procedures is applicable toward grappling with current and future resource stresses by providing a means for refining existing geologic maps. The procedures used in the current analysis already yield encouraging results toward the eventual machine recognition of extensive surface lithologic and topographic patterns. Automatic mapping of a series of hogbacks, strike valleys, and alluvial surfaces along the northwest flank of the San Juan Basin in Colorado can be obtained by minimal man-machine interaction. The determination of causes for separable spectral signatures is dependent upon extensive correlation of micro- and macro field based ground truth observations and aircraft underflight data with the satellite data.

Melhorn, W. N.

Recognition of surface lithologic and topographic patterns in southwest Colorado with ADP techniques

Analysis of ERTS-1 multispectral data by automatic pattern recognition procedures is applicable toward grappling with current and future resource stresses by providing a means for refining existing geologic maps. The procedures used in the current analysis already yield encouraging results toward the eventual machine recognition of extensive surface lithologic and topographic patterns. Automatic mapping of a series of hogbacks, strike valleys, and alluvial surfaces along the northwest flank of the San Juan Basin in Colorado can be obtained by minimal man-machine interaction. The determination of causes for separable spectral signatures is dependent upon extensive correlation of micro- and macro field based ground truth observations and aircraft underflight data with the satellite data.

Melhorn, W. N.

Major element composition of glasses in three Apollo 15 soils.

Approximately 180 glasses in each of three Apollo 15 soils have been analyzed for nine elements. Cluster analysis techniques allow the recognition of preferred glass compositions that are equated with parent rock compositions. Green glass rich in Fe and Mg, poor in Al and Ti may be derived from deep-seated pyroxenitic material now present at the Apennine Front. Fra Mauro basalt (KREEP) is most abundant in the LM soil and is tentatively identified as ray material from the Aristillus-Autolycus area. Highland basalt (anorthositic gabbro), believed to be derived from the lunar highlands, has the same composition as at other landing sites, but is less abundant. The Apennine Front is probably not true highland material but may contain a substantial amount of material with the composition of Fra Mauro basalt, but lacking the high-K content.

Reid, A. M.

Statistical separability of agricultural cover types in subsets of one to twelve spectral channels

The purpose of this study was to determine the statistical separability of multispectral measurements from agricultural cover types: corn, soybeans, green forage (hay and pasture) and forest, in one to twelve spectral channels. Multispectral scanner data in twelve spectral channels in the wavelength range 0.4 to 11.7 microns, acquired for three flightlines were analysed by applying automatic pattern recognition techniques. The same analysis was performed for the data acquired a month later over the same three flightlines to investigate the effect of time on statistical separability of agricultural cover types. In the subsets of one to six spectral channels, the combination of wavelength regions (where V, N, M and T denote the visible, near infrared, middle infrared and thermal infrared wavelength regions, respectively): V, V M, V N M, V N M T, V V N M T, V V N M M T, respectively, were found to be the best choices for getting good overall statistical separability of the agricultural cover types for the data acquired.

Kumar, R.

Lunar soil movement registered by the Apollo 17 cosmic dust experiment

The paper describes the Lunar Ejecta and Meteorites (LEAM) experiment of the Apollo 17 flight mission, placed in the Taurus-Littrow area of the moon. The objective of the experiment was to measure impact parameters of cosmic dust on the lunar surface. Preliminary data analysis led to the recognition that the bulk of events recorded by the LEAM experiment are not signatures of hypervelocity cosmic dust particles as expected, but are induced signatures of electrostatically charged and transported lunar fines.

Berg, O. E.

Evaluation of selected chemical processes for production of low-cost silicon, phase 2

Potential designs for an integrated fluidized-bed reactor/zinc vaporizer/SiCl4 preheater unit are being considered and heat-transfer calculations have been initiated on versions of the zinc vaporizer section. Estimates of the cost of the silicon prepared in the experimental facility have been made for projected capacities of 25, 50, 75, and 100 metric ton of silicon. A 35 percent saving is obtained in going from 25 metric ton/year to the 50 metric ton/year level. This analysis, coupled with the recognition that use of two reactors in the 50 metric ton/year version allows for continued operation (at reduced capacity) with one reactor shut down, has resulted in a recommendation for adoption of an experimental facility capacity of 50 metric ton/year or greater. At this stage, the change to a larger size facility would not increase the design costs appreciably. In the experimental support program, the effects of seed bed particle size and depth were studied, and operation of the miniplant with a new zinc vaporizer was initiated, revealing the need for modification of the latter.

Blocher, J. M., Jr.

Evaluation of spectral channels and wavelength regions for separability of agricultural cover types

The spectral channels were evaluated as well as wavelength regions; visible, near infrared, middle infrared and thermal infrared were evaluated with respect to their estimated probability of correct classification (P sub c) in discriminating agricultural cover types. Multispectral scanner data in twelve spectral channels in the wavelength range of 0.4 to 11.7 micrometers acquired in the middle of July for three flightlines were analyzed by applying automatic pattern recognition techniques. The same analysis was performed for the data acquired in the middle of August, over the same three flightlines, to investigate the effect of time on the results. The effect of deletion of each spectral channel as well as each wavelength region on P sub c was given. Values of P sub c for all possible combinations of wavelength regions in the subsets of one to twelve spectral channels were also given. The overall values of P sub c were found to be greater for the data of the middle of August than the data of the middle of July.

Kumar, R.

Evaluation of spectral channels and wavelength regions for separability of agricultural cover types

The purpose of this study was to evaluate the spectral channel as well as wavelength regions - visible, near infrared, middle infrared and thermal infrared - with respect to their estimated probability of correct classification (P-c) in discriminating agricultural cover types. Multispectral scanner data in twelve spectral channels in the wavelength range of 0.4 to 11.7 micron acquired in the middle of July for three flightlines were analysed by applying automatic pattern recognition techniques. The same analysis was performed for the data acquired in the middle of August, over the same three flightlines, to investigate the effect of time on the results. The effect of deletion of each spectral channel as well as each wavelength region on P-c is given. Values of P-c for all possible combinations of wavelength regions in the subsets of one to twelve spectral channels are also given. The overall values of P-c were found to be greater for the data of the middle of August than the data of the middle of July.

Kumar, R.

Separability of agricultural cover types in spectral channels and wavelength regions

Spectral channels and wavelength regions (visible, near infrared, middle infrared and thermal infrared) were evaluated with respect to their estimated probability of correct classification (Pc) in discriminating agricultural cover types. Multispectral scanner data in twelve spectral channels in the wavelength range of 0.4 to 11.7 microns acquired in the middle of July for three flightlines, were analyzed by applying automatic pattern recognition techniques. The same analysis was performed for the data acquired in the middle of August, 1971, over the same three flightlines, to investigate the effect of time on the results. The effect of deletion of each spectral channel as well as each wavelength region on Pc is given. Values of Pc for all possible combinations of wavelength regions in the subsets of one to twelve spectral channels are also given. The overall values of Pc were found to be greater for the data of the middle of August than the data of the middle of July.

Kumar, R.

Evaluation of spectral channels and wavelength regions for separability of agricultural cover types

The author has identified the following significant results. Multispectral scanner data in twelve spectral channels in the wavelength range of 0.4 to 11.7 microns acquired in the middle of July for three flightlines were analyzed by applying automatic pattern recognition techniques. The same analysis was performed for the data acquired in mid August, over the same three flightlines, to investigate the effect of time on the results. The effect of deletion of each spectral channel, as well as each wavelength region on P sub c, is given. Values of P sub c for all possible combinations of wavelength regions in the subsets of one to twelve spectral channels are also given. The overall values of P sub c were found to be greater for the data of mid August than the data from mid July.

Dejesusparada, N.

Separability of agricultural cover types in spectral channels and wavelength regions

This study was a continuation of a more complete evaluation of the spectral channels as well as wavelength regions - visible, near infrared, middle infrared, and thermal infrared - with respect to their estimated probability of correct classification Pc in discriminating agricultural cover types reported previously by Kumar and Silva (1977). Multispectral scanner data in twelve spectral channels in the wavelength range of 0.4-11.7 microns acquired in the middle of July for three flightlines were analyzed by applying automatic pattern recognition techniques. The same analysis was performed for the data acquired in the middle of August 1971, over the same three flightlines, to investigate the effect of time on the results. The effect of deletion of each spectral channel as well as each wavelength region on Pc is given. Values of Pc for all possible combinations of wavelength regions in the subsets of one to twelve spectral channels are also given. The overall values of Pc were found to be greater for the data of the middle of August than the data of the middle of July.

Kumar, R.

A star camera aspect system suitable for use in balloon experiments

A balloon-borne experiment containing a star camera aspect system was designed, built, and flown. This system was designed to provide offset corrections to the magnetometer and inclinometer readings used to control an azimuth and elevation pointed experiment. The camera is controlled by a microprocessor, including commendable exposure and noise rejection threshold, as well as formatting the data for telemetry to the ground. As a background program, the microprocessor runs the aspect program to analyze a fraction of the pictures taken so that aspect information and offset corrections are available to the experiment in near real time. The analysis consists of pattern recognition of the star field with a star catalog in ROM memory and a least squares calculation. The performance of this system in ground based tests is described. It is part of the NASA/GSFC High Energy Gamma-Ray Balloon Instrument (2).

Hunter, S. D.

Regional-scale estimates of surface moisture availability and thermal inertia using remote thermal measurements

A review is presented of numerical models which were developed to interpret thermal IR data and to identify the governing parameters and surface energy fluxes recorded in the images. Analytic, predictive, diagnostic and empirical models are described. The limitations of each type of modeling approach are explored in terms of the error sources and inherent constraints due to theoretical or measurement limitations. Sample results of regional-scale soil moisture or evaporation patterns derived from the Heat Capacity Mapping Mission and GOES satellite data through application of the predictive model devised by Carlson (1981) are discussed. The analysis indicates that pattern recognition will probably be highest when data are collected over flat, arid, sparsely vegetated terrain. The soil moisture data then obtained may be accurate to within 10-20 percent.

Carlson, T. N.

Analytical concepts for health management systems of liquid rocket engines

Substantial improvement in health management systems performance can be realized by implementing advanced analytical methods of processing existing liquid rocket engine sensor data. In this paper, such techniques ranging from time series analysis to multisensor pattern recognition to expert systems to fault isolation models are examined and contrasted. The performance of several of these methods is evaluated using data from test firings of the Space Shuttle main engines.

Williams, Richard

High resolution ultrasonic spectroscopy system for nondestructive evaluation

With increased demand for high resolution ultrasonic evaluation, computer based systems or work stations become essential. The ultrasonic spectroscopy method of nondestructive evaluation (NDE) was used to develop a high resolution ultrasonic inspection system supported by modern signal processing, pattern recognition, and neural network technologies. The basic system which was completed consists of a 386/20 MHz PC (IBM AT compatible), a pulser/receiver, a digital oscilloscope with serial and parallel communications to the computer, an immersion tank with motor control of X-Y axis movement, and the supporting software package, IUNDE, for interactive ultrasonic evaluation. Although the hardware components are commercially available, the software development is entirely original. By integrating signal processing, pattern recognition, maximum entropy spectral analysis, and artificial neural network functions into the system, many NDE tasks can be performed. The high resolution graphics capability provides visualization of complex NDE problems. The phase 3 efforts involve intensive marketing of the software package and collaborative work with industrial sectors.

Chen, C. H.

Principal investigator in a box: Version 1.2 documentation

Principal Investigator (PI) in a box is a computer system designed to help optimize the scientific results of experiments that are performed in space. The system will assist the astronaut experimenters in the collection and analysis of experimental data, recognition and pursuit of 'interesting' results, optimal use of the time allocated to the experiment, and troubleshooting of the experiment apparatus. This document discusses the problems that motivate development of 'PI-in-a-box', and presents a high- level system overview and a detailed description of each of the modules that comprise the current version of the system.

Jurine Adolph

Robust Fuzzy Controllers Using FPGAs

Electro-mechanical device controllers typically come in one of three forms, proportional (P), Proportional Derivative (PD), and Proportional Integral Derivative (PID). Two methods of control are discussed in this paper; they are (1) the classical technique that requires an in-depth mathematical use of poles and zeros, and (2) the fuzzy logic (FL) technique that is similar to the way humans think and make decisions. FL controllers are used in multiple industries; examples include control engineering, computer vision, pattern recognition, statistics, and data analysis. Presented is a study on the development of a PD motor controller written in very high speed hardware description language (VHDL), and implemented in FL. Four distinct abstractions compose the FL controller, they are the fuzzifier, the rule-base, the fuzzy inference system (FIS), and the defuzzifier. FL is similar to, but different from, Boolean logic; where the output value may be equal to 0 or 1, but it could also be equal to any decimal value between them. This controller is unique because of its VHDL implementation, which uses integer mathematics. To compensate for VHDL's inability to synthesis floating point numbers, a scale factor equal to 10(sup (N/4) is utilized; where N is equal to data word size. The scaling factor shifts the decimal digits to the left of the decimal point for increased precision. PD controllers are ideal for use with servo motors, where position control is effective. This paper discusses control methods for motion-base platforms where a constant velocity equivalent to a spectral resolution of 0.25 cm(exp -1) is required; however, the control capability of this controller extends to various other platforms.

Monroe, Author Gene S., Jr.

Spiking Neurons for Analysis of Patterns

Artificial neural networks comprising spiking neurons of a novel type have been conceived as improved pattern-analysis and pattern-recognition computational systems. These neurons are represented by a mathematical model denoted the state-variable model (SVM), which among other things, exploits a computational parallelism inherent in spiking-neuron geometry. Networks of SVM neurons offer advantages of speed and computational efficiency, relative to traditional artificial neural networks. The SVM also overcomes some of the limitations of prior spiking-neuron models. There are numerous potential pattern-recognition, tracking, and data-reduction (data preprocessing) applications for these SVM neural networks on Earth and in exploration of remote planets. Spiking neurons imitate biological neurons more closely than do the neurons of traditional artificial neural networks. A spiking neuron includes a central cell body (soma) surrounded by a tree-like interconnection network (dendrites). Spiking neurons are so named because they generate trains of output pulses (spikes) in response to inputs received from sensors or from other neurons. They gain their speed advantage over traditional neural networks by using the timing of individual spikes for computation, whereas traditional artificial neurons use averages of activity levels over time. Moreover, spiking neurons use the delays inherent in dendritic processing in order to efficiently encode the information content of incoming signals. Because traditional artificial neurons fail to capture this encoding, they have less processing capability, and so it is necessary to use more gates when implementing traditional artificial neurons in electronic circuitry. Such higher-order functions as dynamic tasking are effected by use of pools (collections) of spiking neurons interconnected by spike-transmitting fibers. The SVM includes adaptive thresholds and submodels of transport of ions (in imitation of such transport in biological neurons). These features enable the neurons to adapt their responses to high-rate inputs from sensors, and to adapt their firing thresholds to mitigate noise or effects of potential sensor failure. The mathematical derivation of the SVM starts from a prior model, known in the art as the point soma model, which captures all of the salient properties of neuronal response while keeping the computational cost low. The point-soma latency time is modified to be an exponentially decaying function of the strength of the applied potential. Choosing computational efficiency over biological fidelity, the dendrites surrounding a neuron are represented by simplified compartmental submodels and there are no dendritic spines. Updates to the dendritic potential, calcium-ion concentrations and conductances, and potassium-ion conductances are done by use of equations similar to those of the point soma. Diffusion processes in dendrites are modeled by averaging among nearest-neighbor compartments. Inputs to each of the dendritic compartments come from sensors. Alternatively or in addition, when an affected neuron is part of a pool, inputs can come from other spiking neurons. At present, SVM neural networks are implemented by computational simulation, using algorithms that encode the SVM and its submodels. However, it should be possible to implement these neural networks in hardware: The differential equations for the dendritic and cellular processes in the SVM model of spiking neurons map to equivalent circuits that can be implemented directly in analog very-large-scale integrated (VLSI) circuits.

Huntsberger, Terrance