Search NASA⌕ Search

SEARCH · Search NASA

Results for “reflectivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

X-ray reflectivity and total reflection x-ray fluorescence study of surface oxide evolution in a GaAs/AlAs multilayer system

Modifications of GaAs/air interface under x-ray exposure have been investigated by means of x-ray reflectometry (XRR). For this purpose a GaAs/AlAs multilayer system was continuously monitored for 90 h while acquiring XRR profiles. Three different starting models for the oxide/contaminants layer were tested for the analysis of XRR data and discussed. The main effect of x-ray exposure, revealed by the three different approaches, is an increase in the thickness of the gallium and arsenic oxides until a saturation value (about 3.0 nm) is reached after about 50 h. Total reflection x-ray fluorescence analysis performed on a couple of twin samples, either irradiated and nonirradiated, confirms that the oxidation process is promoted by x-ray exposure and indicates the presence of a richer As oxide phase at the surface of the x-ray irradiated samples.

36 MATERIALS SCIENCE↗

X-ray Reflectivity Study of the Adsorption of Azacrown Ether at Liquid-liquid Interface

Adsorption of diaza-18-crown-6 ether substituted with two tetracosane (-C{sub 24}H{sub 49}) alkyl chains (ACE-24) was investigated at the liquid-liquid interface. X-ray reflectivity measurements determined the structure of a close-packed monolayer at the hexane-water interface, which is consistent with conclusions drawn indirectly from earlier interfacial tension measurements on similar molecules. These data provide further insights into the role of interfacial processes involving azacrown ethers in ion separation techniques such as the permeation liquid membrane.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mirror with reflectance variable in amplitude and phase. 1. Modelling of a mirror with reflectance variable in amplitude and phase

An operator model of a mirror as a reflector with a reflectance variable over the aperture is developed on the basis of a Fabry-Perot interferometer. The main characteristics of the interferometer (mirror) are studied in the geometric, diffraction, and modal approximations. The differences in the calculation results obtained using the conventional geometric approximation and the diffraction approach proposed in this study are discussed. It is shown that, when the effective Fresnel numbers are comparable to unity, it is necessary to use the diffraction approximation. The possibility of using an interferometer-based mirror as a selector of transverse laser modes is demonstrated. (laser applications and other topics in quantum electronics)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Direct measurement of the static and transient magneto-optical permittivity of cobalt across the entire M -edge in reflection geometry by use of polarization scanning

The microscopic state of a magnetic material is characterized by its resonant magneto-optical response through the off-diagonal dielectric tensor component ε xy . However, the measurement of the full complex ε xy in the extreme ultraviolet spectral region covering the M absorption edges of 3d ferromagnets is challenging due to the need for either a careful polarization analysis, which is complicated by a lack of efficient polarization analyzers, or scanning the angle of incidence in fine steps. Here, we propose and demonstrate a technique to extract the complex resonant permittivity ε xy simply by scanning the polarization angle of linearly polarized high harmonics to measure the magneto-optical asymmetry in reflection geometry. Because this technique is more practical and faster to experimentally implement than previous approaches, we can directly measure the full time evolution of ε xy (t) during laser-induced demagnetization across the entire M 2,3 absorption edge of cobalt with femtosecond time resolution. We find that for polycrystalline Co films on an insulating substrate, the changes in ε xy are uniform throughout the spectrum, to within our experimental precision. This result suggests that, in the regime of strong demagnetization, the ultrafast demagnetization response is primarily dominated by magnon generation. Here, we estimate the contribution of exchange-splitting reduction to the ultrafast demagnetization process to be no more than 25%.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Defect Band Luminescence Intensity Reversal as Related to Application of Anti-Reflection Coating on mc-Si PV Cells: Preprint

Photoluminescence (PL) imaging is widely used to identify defective regions within mc-Si PV cells. Recent PL imaging investigations of defect band luminescence (DBL) in mc-Si have revealed a perplexing phenomenon. Namely, the reversal of the DBL intensity in various regions of mc-Si PV material upon the application of a SiNx:H anti-reflective coating (ARC). Regions with low DBL intensity beforeARC application often exhibit high DBL intensity afterwards, and the converse is also true. PL imaging alone cannot explain this effect. We have used high resolution cathodoluminescence (CL) spectroscopy and electron beam induced current (EBIC) techniques to elucidate the origin of the DBL intensity reversal. Multiple sub-bandgap energy levels were identified that change in peak position andintensity upon the application of the ARC. Using this data, in addition to EBIC contrast information, we provide an explanation for the DBL intensity reversal based on the interaction of the detected energy levels with the SiNx:H ARC application. Multiple investigations have suggested that this is a global problem for mc-Si PV cells. Our results have the potential to provide mc-Si PV producers apathway to increased efficiencies through defect mitigation strategies.

14 SOLAR ENERGY↗

Design and laser damage properties of a dichroic beam combiner coating for 22.5-deg incidence and S polarization with high transmission at 527 nm and high reflection at 1054 nm

We designed a dichroic beam combiner coating with 11 HfO 2 /SiO 2 layer pairs and deposited it on a large substrate. It provides high transmission (HT) at 527 nm and high reflection (HR) at 1054 nm for a 22.5-deg angle of incidence (AOI), S polarization (Spol), and uses near half-wave layer thicknesses for HT at 527 nm, modified for HR at 1054 nm. The two options for the beam combiner each require that a high intensity beam be incident on the coating from within the substrate (from glass). We analyze the laser-induced damage threshold (LIDT) differences between the two options in terms of the 527- and 1054-nm E-field behaviors for air → coating and glass → coating incidences. This indicates that LIDTs should be higher for air → coating than for glass → coating incidence. LIDT tests at the use AOI, Spol with ns pulses at 532 and 1064 nm confirm this, with glass → coating LIDTs about half that of air → coating LIDTs. Lastly, these results clearly indicate that the best beam combiner option is for the high intensity 527 and 1054 nm beams to be incident on the coating from air and glass, respectively.

36 MATERIALS SCIENCE↗

Venus: Global distribution of Pioneer-Venus radar roughness and reflectivity and global correlation of altimetry, roughness and reflectivity observations

An improved version of the Pionner-Venus orbital data was used for a statistical analysis of global radar roughness and (alpha(0)) (rho) reflectivity. Classification maps of the venusian surface are produced in a supervised manner on the basis of statistical and empirical studies of the individual data sets. The primary objective is to assess the degree of homogeneity of surface radar properties within topographic provinces in order to map possible geologic boundaries. Maps were produced by correlating two data sets at a time. Classification of specific regions, such as Ishtar, has demonstrated that distinct geological units can be identified.

Head, J. W.↗