Search NASA⌕ Search

SEARCH · Search NASA

Results for “renewable biofuel”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Quantitative Determination of Biomass-derived Renewable Carbon in Fuels from Coprocessing of Bio-oils in Refinery Using a Stable Carbon Isotopic Approach

Increasing renewable carbon incorporation into conventional fuels through coprocessing with vacuum gas oil (VGO, a petroleum refining feedstock) is a critical step in biofuels development, scaling-up, adoption and associated GHG reduction. Optimization of the co-processing parameters maximizes incorporation of the renewable carbon in the fuel products. Quantitative determination of the renewable carbon content in the co-processed products provides direct evaluation of the parameters. The co-processing bio-oil with VGO through hydrocracking (HC) or fluid catalytic cracking (FCC) system resulted in carbon isotopic fractionation that prevented the direct use of the isotope mixing model for quantifying the renewable carbon. Here, we report an algorithm of using a stable carbon isotope approach to quantify the renewable carbon content in co-processing biofuel products through high-precision ?13C analysis. A controlled experiment carried out by blending a fossil diesel (-29.013‰) with a bio-diesel (-30.099‰) at various blending levels up to 98.0/2.0 wt% is presented and has demonstrated the applicability of this approach. The carbon isotope fractionation factors for the bio-oil co-processing were obtained by using a 14C-derived isotope-mixing model. The ?13C method was tested by co-processing 13C-labeled bio-crude and natural woody biomass-derived fast pyrolysis (FP) and catalytic fast pyrolysis (CFP) bio-oils with VGO. The results were verified by 14C accelerator mass spectrometry (AMS) method (ASTM-D6866) and compared with the yield mass balance (YMB) method. Strong agreement between d13C and 14C AMS methods demonstrated the applicability of the ?13C method to quantify renewable carbon content in co-processing fuel products and guide the co-processing optimization

Li, Zhenghua↗
DOE OSTI2020

Balancing Water Sustainability and Productivity Objectives in Microalgae Cultivation: Siting Open Ponds by Considering Seasonal Water-Stress Impact Using AWARE-US

Microalgae have great potential as an energy crop. Scaling-up algal biofuel production in the United States (US) should be done with careful attention to water stress. This study evaluates the regional and seasonal water-stress impact of potential algae-pond deployments in the US. Three site-selection strategies focusing on biomass yield, water-use efficiency (WUE), and water-stress impact, respectively, are applied and compared to meet a US algae biomass production target of 30 million metric tons/yr ash-free dry weight, which converts to 20.8 billion L renewable diesel, via hydrothermal liquefaction. Ranking algae ponds based on biomass yield leads to freshwater consumption of 2.66 km3/yr, resulting in the highest water-stress impact (39.1 US equivalent km3). Under the WUE scenario, water consumption is reduced by 81%, but biomass yield is reduced by 12%. In contrast, adding a water-stress constraint to the biomass-yield ranking reduces water consumption by 50% and water-stress impact by 97%, with a small yield reduction (1.7%). Results show that pond location has a significant effect on water stress and that water stress is not proportional to water consumption or yield. Furthermore, capturing seasonal water patterns is critical for planning because sites in water-abundant regions can have short-term but significant water-stress impacts.

algae, Biofuel, water scarcity footprint, hydrothe↗
DOE OSTI2022

Counterfactuals to Assess Effects to Species and Systems from Renewable Energy Development

Renewable energy production, mostly via wind, solar, and biofuels, is central to goals worldwide to reduce carbon emissions and mitigate anthropogenic climate change (IPCC, 2014; Portner et al., 2021). Nevertheless, adverse impacts to natural systems, especially fatalities of wildlife and alteration of habitat, are key challenges for renewable energy production (Allison et al., 2019; Katzner et al., 2019).

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2024

Using Computer Simulations to Optimize Biofuel Production

The DOE strives to ensure America's security and prosperity by addressing energy challenges. NREL shares this goal and tries to achieve a clean energy world. Fossil fuels are problematic for both organizations. Using them endangers American security. Their supply is finite and burning them causes environmental damage. Biofuels are a good alternative to fossil fuels. They are renewably produced on American soil and can lower greenhouse gas emissions. Also, cars and planes need no costly mechanical adjustments to use biofuels. However, the fuels themselves are expensive. For my SULI project, I reduced the cost of biofuels by optimizing the production process through computer simulations. Existing simulations were accurate but slow. One simulation takes up to eight hours, and researchers must do hundreds. My solution reduces the computing time. I treated the biomass particles in the simulation as one-dimensional. That simplified the simulation equations, making them easier for the computer to solve. Still, biomass particles are three-dimensional. The 1D assumption was wrong and produced inaccurate results. To maintain accuracy while increasing speed, I developed a method to convert 1D simulation results into usable 3D data. I adjusted the 1D simulation until the output matched the 3D results for a specific environment. I found out how much the simulation changed when the environment changed. Machine learning algorithms defined a relationship between 1D and 3D data for all environments. This lets scientists convert fast 1D simulation results into valid 3D data.

1D↗
DOE OSTI2026

Basal Plane Doping to Activate Colloidal MoS 2 Nanosheets for Catalytic Hydrodeoxygenation of para- Cresol

The valorization of biomass into biofuels is a critical process for producing renewable fuels. Hydrodeoxygenation (HDO), particularly over doped molybdenum disulfide (MoS 2 ), a transition metal dichalcogenide (TMD) material, is a common representative catalytic reaction system for converting biomass-derived materials into useful hydrocarbons. However, the location and role of dopants, such as Co, in HDO is not fully understood. The effects of dopant location and oxidation state are often precluded by inhomogeneity in the ensemble properties of nanosheet size and dopant dispersion, as well as difficulty in observing the behavior of atomic site behavior directly. Using a colloidal approach to synthesize cobalt-doped MoS 2 nanosheets with controlled dopant concentration, combined with X-ray absorption spectroscopy (XAS) and density functional theory (DFT) calculations, we determine that basal plane doped Co (25% Co:Mo mole ratio) shows peak catalytic activity in HDO of para-cresol, a model biomass-derived compound, and that basal Co sites are demonstrably more active than edge sites. By observing these doping effects in MoS 2 catalysts for HDO, we can further optimize not only the production of carbon-neutral fuels but also direct the tailoring of doped TMD catalysts toward their intended applications.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Engineering of xylose metabolic pathways in Rhodotorula toruloides for sustainable biomanufacturing

Abstract The oleaginous yeast Rhodotorula toruloides is a promising microbial cell factory for the sustainable production of biofuels and value-added chemicals from renewable carbon sources. Unlike the conventional yeast Saccharomyces cerevisiae, R. toruloides can naturally metabolize xylose, the second most abundant sugar in lignocellulosic hydrolysates. However, its native xylose metabolism is inefficient, characterized by slow xylose uptake and accumulation of D-arabitol. Moreover, despite its phenotype, research on the enzymes involved in xylose metabolism has yet to reach a consensus. Therefore, this review provides a comprehensive analysis of the non-canonical xylose metabolism in R. toruloides, focusing on the properties of key enzymes involved in xylose metabolism. Native xylose reductase and xylitol dehydrogenase exhibit broad substrate promiscuity compared to their counterparts in the xylose-fermenting Scheffersomyces stipitis. Additionally, the absence of xylulokinase expression under xylose-utilizing conditions redirects metabolism toward D-arabitol accumulation. Consequently, D-arabitol dehydrogenases and ribulokinase play essential roles in the xylose metabolism of R. toruloides. These findings highlight the fundamental differences between R. toruloides xylose metabolism and the oxidoreductase pathways observed in other xylose-fermenting yeast, providing insights for metabolic engineering strategies to improve xylose utilization and enhance bioconversion of cellulosic hydrolysates to different bioproducts by R. toruloides.

Biotechnology & Applied Microbiology↗
DOE OSTI2025

Refinery Integration Analysis: Pathways, Challenges, and Opportunities

Integrating biomass-derived intermediates into traditional petroleum refineries presents unique challenges and opportunities, requiring innovative analysis approaches that account for biofuel producers and refiners. Consequently, teams within the National Renewable Energy Laboratory (NREL) have developed a comprehensive refinery integration analysis framework that combines experimental data, detailed techno-economic analyses of bio-conversion pathways, and economic projections within refinery linear programming (LP) optimization models. These models enable the identification of promising bio-integration strategies tailored to specific refinery configurations, economic conditions, and production goals. They also capture upstream and downstream impacts, highlighting critical bottlenecks and research opportunities for increasing the share of biogenic feedstocks in traditional refining operations. Refinery models are also packaged into a broader bio-economy optimization framework which enables biofuel supply chain optimization with standalone biofuel production and refinery co-processing/repurposing options. This presentation discusses promising refinery bio-integration strategies along with key challenges and opportunities identified using NREL's refinery and bio-economy optimization frameworks.

09 BIOMASS FUELS↗
DOE OSTI2025

Predicting Fuel Properties and Emissions for Advanced Biofuels for Diesel Engines (CRADA Final Report)

The project will investigate variations in biofuel composition and optimize performance in combustion for conventional and future compression ignition engines. It will evaluate a variety of bio-derived molecules in the diesel range that can be produced using technology in ExxonMobil’s portfolio as well as fuels that cover the range of potential molecular structures for robust model development. Changes in fuel/air premixing and stratification in advanced engines could alter the relationship between fuel properties and performance in comparison to current generation spray combustion approaches. NREL experience in fuel and combustion modeling will enable development of general rules for predicting performance of a wide range of biofuel options.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2020

Simulated Biomass Sorghum GHG Reduction Potential is Similar to Maize

Policy support for cellulosic biofuels is contingent on their achieving much greater reductions in life-cycle greenhouse gas emissions than corn starch ethanol. Biomass sorghum has been suggested as a genetically and agronomically tractable feedstock species to augment near-term cellulosic feedstock production. This study used DayCent modeling to investigate biomass sorghum production emissions relative to corn with and without stover utilization at 3,265 across the rainfed United States. Sorghum produced greater average feedstock dry matter (15.6±1.4 vs. 14.8±2.2 Mg ha -1 yr -1 ) and slightly lower estimated ethanol energy yields (10.6±1.0 vs. 11.8±2.9 MJ m -2 yr -1 ) as corn grain with 75% stover collection. The high biomass removals in both the sorghum and corn stover scenarios led to soil organic carbon losses on 90% and 100% of sites, respectively. Average feedstock production emissions intensities were similar between sorghum and corn with 75% stover removal (17.6±2.8 vs. 18.8±3.0 g CO 2 e MJ -1 ), but were notably lower under sorghum for sites in the southwestern study region (13.6±3.0 vs. 22.5±3.1 g CO 2 e MJ -1 ). Futhermore, these results suggest that biomass sorghum produces cellulosic feedstock with similar emissions to corn grain and at current yield levels is unlikely to meet the Renewable Fuel Standard emissions reduction threshold for cellulosic biofuels.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Supply chain optimization of sustainable aviation fuel from carinata in the Southeastern United States

We report carinata is a purpose-grown oilseed feedstock for renewable fuels, including sustainable aviation fuel (SAF) that can replace conventional aviation fuel (CAF). Given carinata is a new crop in the Southeastern United States, it is crucial to analyze its sustainability from a supply chain perspective. This study developed a mixed-integer linear programming (MILP) model and simulated it for 20 years, starting from a farm (county-level data) and ending at the airport. About 2.06 million ha in Alabama, Florida, and Georgia combined were found suitable for carinata production. Given the three-year rotation period, about 0.69 million hectares can be cultivated annually, approximately 65% of which was in Georgia. About 2.4% of the combined SAF annual demand of four major airports (about 210 thousand t) in the study area is satisfied at that level of carinata cultivation. However, all available SAF was supplied to the Atlanta airport as this decision minimizes the supply chain cost. A total of 1343 storage units, one oil extraction mill, and one biorefinery were needed to meet the overall demand. We found that SW Georgia is the top supplier of carinata seeds. The unit cost of production and carbon intensity were estimated to be $\$$0.89 L -1 (or $\$$26.79 GJ -1 ) and 0.91 kg CO 2 e L -1 (or 27.28 kg CO 2 e GJ -1 ), respectively. This carbon intensity of carinata-based SAF was 67.8% lower than that of CAF. With variations included in SAF demand, yield, and soil carbon sequestration, carbon savings remained between 66.5% and 67.8%. Given the GHG advantage of SAF over CAF, there is justification for subsidies required to make SAF competitive.

10 SYNTHETIC FUELS↗
DOE OSTI2020

Metabolic engineering of Zymomonas mobilis for anaerobic isobutanol production

Biofuels and value-added biochemicals derived from renewable biomass via biochemical conversion have attracted considerable attention to meet global sustainable energy and environmental goals. Isobutanol is a four-carbon alcohol with many advantages that make it attractive as a fossil-fuel alternative. Zymomonas mobilis is a highly efficient, anaerobic, ethanologenic bacterium making it a promising industrial platform for use in a biorefinery. In this study, the effect of isobutanol on Z. mobilis was investigated, and various isobutanol-producing recombinant strains were constructed. The results showed that the Z. mobilis parental strain was able to grow in the presence of isobutanol below 12 g/L while concentrations greater than 16 g/L inhibited cell growth. Integration of the heterologous gene encoding 2-ketoisovalerate decarboxylase such as kdcA from Lactococcus lactis is required for isobutanol production in Z. mobilis. Moreover, isobutanol production increased from nearly zero to 100-150 mg/L in recombinant strains containing the kdcA gene driven by the tetracycline-inducible promoter Ptet. In addition, we determined that overexpression of a heterologous als gene and two native genes (ilvC and ilvD) involved in valine metabolism in a recombinant Z. mobilis strain expressing kdcA can divert pyruvate from ethanol production to isobutanol biosynthesis. This engineering improved isobutanol production to above 1 g/L. Finally, recombinant strains containing both a synthetic operon, als-ilvC-ilvD, driven by Ptet and the kdcA gene driven by the constitutive strong promoter, Pgap, were determined to greatly enhance isobutanol production with a maximum titer about 4.0 g/L. Finally, isobutanol production was negatively affected by aeration with more isobutanol being produced in more poorly aerated flasks. This study demonstrated that overexpression of kdcA in combination with a synthetic heterologous operon, als-ilvC-ilvD, is crucial for diverting pyruvate from ethanol production for enhanced isobutanol biosynthesis. Moreover, this study also provides a strategy for harnessing the valine metabolic pathway for future production of other pyruvate-derived biochemicals in Z. mobilis.

09 BIOMASS FUELS↗
DOE OSTI2020

Recent developments in pretreatment technologies on lignocellulosic biomass: Effect of key parameters, technological improvements, and challenges

Lignocellulosic biomass is an inexpensive renewable source that can be used to produce biofuels and bioproducts. The recalcitrance nature of biomass hampers polysaccharide accessibility for enzymes and microbes. Several pretreatment methods have been developed for the conversion of lignocellulosic biomass into value-added products. Yet, these pretreatment methods also produce a wide range of secondary compounds, which are inhibitory to enzymes and microorganisms. The selection of an effective and efficient pretreatment method discussed in the review and its process optimization can significantly reduce the production of inhibitory compounds and may lead to enhanced production of fermentable sugars and biochemicals. Furthermore, evolutionary and genetic engineering approaches are being used for the improvement of microbial tolerance towards inhibitors. Advancements in pretreatment and detoxification technologies may help to increase the productivity of lignocellulose-based biorefinery. Here, we discuss the recent advancements in lignocellulosic biomass pretreatment technologies and strategies for the removal of inhibitors.

09 BIOMASS FUELS↗
DOE OSTI2024

Molecular-level architecture of Chlamydomonas reinhardtii’s glycoprotein-rich cell wall

Abstract Microalgae are a renewable and promising biomass for large-scale biofuel, food and nutrient production. However, their efficient exploitation depends on our knowledge of the cell wall composition and organization as it can limit access to high-value molecules. Here we provide an atomic-level model of the non-crystalline and water-insoluble glycoprotein-rich cell wall of Chlamydomonas reinhardtii . Using in situ solid-state and sensitivity-enhanced nuclear magnetic resonance, we reveal unprecedented details on the protein and carbohydrate composition and their nanoscale heterogeneity, as well as the presence of spatially segregated protein- and glycan-rich regions with different dynamics and hydration levels. We show that mannose-rich lower-molecular-weight proteins likely contribute to the cell wall cohesion by binding to high-molecular weight protein components, and that water provides plasticity to the cell-wall architecture. The structural insight exemplifies strategies used by nature to form cell walls devoid of cellulose or other glycan polymers.

09 BIOMASS FUELS↗
DOE OSTI2024

2023 Project Peer Review Report

The Bioenergy Technologies Office (BETO) within the U.S. Department of Energy’s Office of Energy Efficiency and Renewable Energy supports the research, development, and demonstration (RD&D) of technologies aimed at mobilizing domestic renewable carbon resources for the reduction of greenhouse gas emissions across the U.S. economy. BETO systematically prioritizes RD&D into technology opportunities across a range of emerging scientific breakthroughs and technology readiness levels in the subprogram areas illustrated in Figure 1. This approach supports a diverse portfolio while developing the most promising and widely applicable technologies, testing technologies as integrated processes, and demonstrating integrated processes to support scale-up. These technologies will use a broad variety of renewable carbon resources to produce increasing volumes of biofuels and bioproducts. More information on BETO’s mission, goals, and strategic approaches can be found in the Bioenergy Technologies Office Multi-Year Program Plan. The biennial Peer Review process enables external stakeholders to provide feedback on the responsible use of taxpayer funding and develop recommendations for the most efficient and effective ways to accelerate the development of a bioenergy industry. This report includes the results of the Project Peer Review meeting held on April 3–7, 2023, in Denver, Colorado.

09 BIOMASS FUELS↗
DOE OSTI2022

A Streamlined Strategy for Biohydrogen Production with Halanaerobium hydrogeniformans , an Alkaliphilic Bacterium

Biofuels are anticipated to enable a shift from fossil fuels for renewable transportation and manufacturing fuels, with biohydrogen considered attractive since it could offer the largest reduction of global carbon budgets. Currently, lignocellulosic biohydrogen production remains inefficient with pretreatments that are heavily fossil fuel-dependent. However, bacteria using alkali-treated biomass could streamline biofuel production while reducing costs and fossil fuel needs. An alkaliphilic bacterium, Halanaerobium hydrogeniformans, is described that is capable of biohydrogen production at levels rivaling neutrophilic strains, but at pH 11 and hypersaline conditions. H. hydrogeniformans ferments a variety of 5- and 6-carbon sugars derived from hemicellulose and cellulose including cellobiose, and forms the end products hydrogen, acetate, and formate. Further, it can also produce biohydrogen from switchgrass and straw pretreated at temperatures far lower than any previously reported and in solutions compatible with growth. Hence, this bacterium can potentially increase the efficiency and efficacy of biohydrogen production from renewable biomass resources.

09 BIOMASS FUELS↗