Search NASA⌕ Search

SEARCH · Search NASA

Results for “retention”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

A Deep Exon Cryptic Splice Site Promotes Aberrant Intron Retention in a Von Willebrand Disease Patient

A translationally silent single nucleotide mutation in exon 44 (E44) of the von Willebrand factor (VWF) gene is associated with inefficient removal of intron 44 in a von Willebrand disease (VWD) patient. This intron retention (IR) event was previously attributed to reordered E44 secondary structure that sequesters the normal splice donor site. We propose an alternative mechanism: the mutation introduces a cryptic splice donor site that interferes with the function of the annotated site to favor IR. We evaluated both models using minigene splicing reporters engineered to vary in secondary structure and/or cryptic splice site content. Analysis of splicing efficiency in transfected K562 cells suggested that the mutation-generated cryptic splice site in E44 was sufficient to induce substantial IR. Mutations predicted to vary secondary structure at the annotated site also had modest effects on IR and shifted the balance of residual splicing between the cryptic site and annotated site, supporting competition among the sites. Further studies demonstrated that introduction of cryptic splice donor motifs at other positions in E44 did not promote IR, indicating that interference with the annotated site is context dependent. We conclude that mutant deep exon splice sites can interfere with proper splicing by inducing IR.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2022

Soil pH Buffering Capacity, Geochemical Characterization, and Soil Water Retention for Arctic Soils of Seward Peninsula and Utqiagvik, Alaska, 2013-2019

This dataset provides pH titration data and soil pH buffering capacities of 21 Arctic soils that were collected between 2013-2019. Geochemical data including soil organic carbon, carbon:nitrogen ratio, initial pH, and gravimetric water content are also reported. Additional measurements of cation exchange capacity and soil water retention (dry range) are presented for selected soils. A script, developed in R, is also included for a simple biogeochemical simulation that incorporates soil pH buffering capacity. This dataset contains 7 csv files and one R script.The Next-Generation Ecosystem Experiments: Arctic (NGEE Arctic), was a research effort to reduce uncertainty in Earth System Models by developing a predictive understanding of carbon-rich Arctic ecosystems and feedbacks to climate. NGEE Arctic was supported by the Department of Energy's Office of Biological and Environmental Research.The NGEE Arctic project had two field research sites: 1) located within the Arctic polygonal tundra coastal region on the Barrow Environmental Observatory (BEO) and the North Slope near Utqiagvik (Barrow), Alaska and 2) multiple areas on the discontinuous permafrost region of the Seward Peninsula north of Nome, Alaska.Through observations, experiments, and synthesis with existing datasets, NGEE Arctic provided an enhanced knowledge base for multi-scale modeling and contributed to improved process representation at global pan-Arctic scales within the Department of Energy's Earth system Model (the Energy Exascale Earth System Model, or E3SM), and specifically within the E3SM Land Model component (ELM).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Low-Oxidized Siloxene Nanosheets with High Capacity, Capacity Retention, and Rate Capability in Lithium-Based Batteries

The mechanical degradation experienced by Si electrodes during Li (de)alloying reactions can potentially be mitigated by using Si-based materials with layered 2D geometries. Such materials are expected to exhibit favorable mechanical properties and be capable of buffering the volume change associated with (de)lithitation. In this work, 2D siloxene nanosheets are synthesized using a facile topotactic reaction followed by ultrasonication as an exfoliation step. Here, detailed structural and chemical characterization via electron microscopy, X-ray photoelectron spectroscopy (XPS), and Raman spectroscopy is conducted, revealing a low-oxidized siloxene nanosheet material with only 15% surface Si-oxide. The obtained siloxene nanosheets are tested as Li-ion negative electrodes in lithium-based electrochemical cells. The cells exhibit high rate capability with a capacity of 935 mAh g –1 at 3200 mA g –1 and ≈99.5% coulombic efficiency. The inclusion of fluoroethylene carbonate (FEC) in the electrolyte improves capacity retention over 200 cycles from 13% to 77% at 1000 mA g –1 . This behavior is attributed to the FEC decomposition forming a solid electrolyte interphase (SEI) with higher ion conductivity and robust LiF/Li x PO y F z content, as characterized via XPS Raman spectroscopy.

25 ENERGY STORAGE↗
DOE OSTI2023

High Sulfur Loading and Capacity Retention in Bilayer Garnet Sulfurized‐Polyacrylonitrile/Lithium‐Metal Batteries with Gel Polymer Electrolytes

The cubic‐garnet (Li 7 La 3 Zr 2 O 12 , LLZO) lithium–sulfur battery shows great promise in the pursuit of achieving high energy densities. The sulfur used in the cathodes is abundant, inexpensive, and possesses high specific capacity. In addition, LLZO displays excellent chemical stability with Li metal; however, the instabilities in the sulfur cathode/LLZO interface can lead to performance degradation that limits the development of these batteries. Therefore, it is critical to resolve these interfacial challenges to achieve stable cycling. Here, an innovative gel polymer buffer layer to stabilize the sulfur cathode/LLZO interface is created. Employing a thin bilayer LLZO (dense/porous) architecture as a solid electrolyte and significantly high sulfur loading of 5.2 mg cm −2 , stable cycling is achieved with a high initial discharge capacity of 1542 mAh g −1 (discharge current density of 0.87 mA cm −2 ) and an average discharge capacity of 1218 mAh g −1 (discharge current density of 1.74 mA cm −2 ) with 80% capacity retention over 265 cycles, at room temperature (22 °C) and without applied pressure. Achieving such stability with high sulfur loading is a major step in the development of potentially commercial garnet lithium–sulfur batteries.

25 ENERGY STORAGE↗
DOE OSTI2025

Understanding the Benefit of Hybrid Electrolytes towards Vanadium Dissolution Suppression and Improved Capacity Retention in Zinc‐Aqueous Batteries Using NaV 3 O 8 Cathodes

Vanadate cathodes used in aqueous Zn-ion batteries with ZnSO 4 are hindered by capacity loss from V dissolution into the electrolyte. However, studies pinpointing the onset of dissolution as a function of electrochemical redox state and quantifying the amount of associated active material are lacking. To prevent dissolution of the NaV 3 O 8 active material, Na + ions are introduced into the electrolyte. Specifically, a hybrid ZnSO 4 + Na 2 SO 4 electrolyte is investigated in concert with NaV 3 O 8 (NVO) cathodes of varied crystallinity to determine the resulting impacts on cathode dissolution and functional electrochemistry. The use of Na + -containing hybrid electrolyte shows no significant change in Zn 2+ diffusion coefficients yet improved capacity retention. Time-resolved quantitative optical emission spectroscopy demonstrates the suppression of V dissolution with the hybrid electrolyte in both pristine and cycled electrodes. Operando synchrotron X-ray diffraction and absorption provide mechanistic insights. Hydrated NVO with wider interplanar spacing exhibits much higher H + /Zn 2+ capacity, while the Na 2 SO 4 mitigates the formation of irreversible side products. Furthermore, this study demonstrates that the use of hybrid electrolytes and control of crystallite size in the parent material can significantly improve electrochemical behavior of layered V-based cathodes in Zn-ion batteries, providing a general strategy toward safe and resilient aqueous battery systems.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Oxygen Vacancy Introduction to Increase the Capacity and Voltage Retention in Li‐Excess Cathode Materials

Li‐rich rocksalt oxides are promising cathode materials for lithium‐ion batteries due to their large capacity and energy density, and their ability to use earth‐abundant elements. The excess Li in the rocksalt, needed to achieve good Li transport, reduces the theoretical transition metal redox capacity and introduces a labile oxygen state, both of which lead to increased oxygen oxidation and concomitant capacity loss with cycling. Herein, it is demonstrated that substituting the labile oxygen in Li‐rich cation‐disordered rocksalt materials with a vacancy is an effective strategy to inhibit oxygen oxidation. It is found that the oxygen vacancy in cation‐disordered lithium manganese oxide favors high Li coordination thereby reducing the concentration of unhybridized oxygen states, while increasing the theoretical Mn capacity. It is shown that in the vacancy‐containing compound, synthesized by ball milling, the Mn valence is lowered to less than +3, providing access to more than 300 mAh g −1 capacity from the Mn 2+ /Mn 4+ redox reservoir. The increased transition metal redox and decreased O oxidation are found to improve the capacity and voltage retention, indicating that oxygen vacancy creation to remove the most vulnerable oxygen ions and reduce transition metal valence provides a new opportunity for the design of high‐performance Li‐rich rocksalt cathodes.

25 ENERGY STORAGE↗
DOE OSTI2020

UO 2 + 5 vol% ZrB 2 nano composite nuclear fuels with full boron retention and enhanced oxidation resistance

The boron isotope ( 10 B) can be used as a neutron absorber in UO 2 to control the reactivity of nuclear fuel pellets, however, the boron source can react with oxygen source in UO 2 to form B 2 O 3 that vaporize readily at temperatures above 1200 °C. Unfortunately, the sintering of UO 2 fuel requires hours holding at high temperature (>1700 °C), resulting in an inevitable B loss during sintering and unpredictable B concentration in final product. It is challenging to incorporate boron through a conventional sintering method. In this work, we demonstrated that spark plasma sintering (SPS), a field assisted sintering technology, can effectively densify UO 2 + 5 vol% ZrB 2 composite fuel pellets by rapid consolidation at 1600 °C for a short duration of 5 min under an applied pressure of 40 MPa. Further, thermogravimetric analysis (TGA) measurements confirm that ZrB 2 is fully retained inside the composite fuel pellets. Inside the composite fuel pellets, nano sized ZrB 2 particles are uniformly distributed along the grain boundaries of the UO 2 matrix. The ZrB 2 particle transforms to a glassy B 2 O 3 phase covering the sample surface and grain boundaries of UO 2 matrix after a simple post-sintering annealing at 1000 °C in flowing Argon gas for 4 h. The formed glassy B 2 O 3 slows down the diffusion of oxygen ions and postpones the onset temperature for oxidation of UO 2 from 400 °C to 550 °C. This study demonstrates the capability of SPS, an advanced fuel manufacturing technique, to achieve a full retention of ZrB 2 in UO 2 oxide fuel and increase oxidation resistance through a simple post-sintering annealing. The reported work holds great engineering potential for development of advanced oxide fuel for nuclear application.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Fission gas retention of densely packed uranium carbonitride tristructural-isotropic fuel particles in a 3D printed SiC matrix

The Transformational Challenge Reactor (TCR) fuel form was designed to contain large, densely packed uranium carbonitride (UCN) tristructural-isotropic (TRISO) fuel particles within a 3D printed SiC matrix, increasing the uranium density compared to conventional TRISO fuel forms and offering full geometric freedom for core design. Here, this work summarizes initial low-burnup, high-power irradiation testing of TCR fuel materials, including loose UCN TRISO particles and integral fuel compacts with ~55% TRISO particles by volume, to evaluate fission gas retention. Fission gasses were fully retained in all loose particle tests and in integral compacts irradiated at low (<250 °C) surface temperatures. Initial testing at higher (~700–750 °C) fuel surface temperatures showed fission gas release (FGR) and complete fracture of three compacts, but no FGR was observed in later high temperature tests (~300–750 °C) of both fueled compacts and loose TRISO particles. Calculated thermal stresses in the failed compacts were far less than the measured strength of the SiC matrix and the stresses in some failed compacts were less than those in compacts that did not show FGR. Thermal stress-induced matrix cracks also would not cause complete fracture because the tensile stresses transition to compression in the higher temperature regions. Therefore, fuel failure was likely not caused by thermal stresses and may have been related to leakage currents from the electrical heaters and erratic fuel surface temperatures that were only observed in the test for which failure was observed. In any case, the matrix cracks propagated through the coatings of TRISO particles located in the high-density matrix regions on the peripheries of the compacts, resulting in measurable fission gas release. The discussion focuses on the importance of understanding matrix density distributions and the particle-matrix interface properties to prevent matrix cracks from causing TRISO particle failures.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2026

Tetrahedral Zn 2+ doping LiNi 0.6 Mn 0.2 Co 0.2 O 2 improves discharge capacity retention by altering surface Ni valence during cycling and preventing oxygen evolution

5 mol-% Zn 2+ was added to the co-precipitation synthesis of LiNi 0.6 Mn 0.2 Co 0.2 O 2 (NMC622) to understand Zn's effect on the structural and electronic properties of NMC622. Zn is determined to successfully dope into the NMC crystal lattice as there is an increase in d-spacing along the [003], [104], and [110] directions and an increase in molar volume (100.75 cm 3 mol -1 for NMC622 and 101.00 cm 3 mol -1 for Zn-NMC). Through XPS, Zn is determined to dope on the tetrahedral 6c Wyckoff site in the NMC structure and TEM-EDS reveals that despite a slight ZnO impurity phase, 1.4 mol-% Zn successfully dopes into the crystal structure. Furthermore, cyclic voltammetry shows a suppressed anodic wave associated with oxygen evolution and EIS demonstrates that Zn-doped NMC decreases charge transfer resistance and increases Li diffusion by an order of magnitude. After the formation cycles, NMC has a higher 1 C accessible capacity, 141 mAh/g, over Zn-NMC (132 mAh/g), but after long term cycling Zn-NMC has a higher accessible capacity (117 mAh/g compared to 96 mAh/g for NMC) and increases discharge capacity retention by 18% leading to longer cycle life.

Electrochemistry↗
DOE OSTI2021

Removal, distribution and retention of metals in a constructed wetland over 20 years

The A-01 wetland treatment system (WTS) was designed to remove metals (primarily copper) from the effluent at the A-01 National Pollution Discharge Elimination System (NPDES) outfall at the Savannah River Site, Aiken, SC. This research investigated metal removal, distribution and retention in the A-01 WTS over a period of 20 years. The findings are important for ensuring continued metal sequestration in the A-01 WTSs over time, providing management guidance for constructed wetlands, and investigating changes in metal remediation effectiveness as a wetland ages. During 20 years of operation, systematic water and sediment sampling validated the wetlands' performance. After passage through the treatment cells, Cu concentrations were well below permit limits during all years of operation, often falling below 10 μg L -1 . Cu removal has been consistent over time, averaging about 80% despite large changes in influent Cu concentrations. Most divalent metals were rapidly removed from the water and held in the sediments shortly after the water entered the treatment wetland. Average removal of Pb from water by the wetland system was 67 and 74% in 2004 and 2020, respectively. Comparable values for Zn were 52 and 65%, respectively. Generally, the highest concentrations of Cu, Pb, and Zn were found in the sediment from the first cell in each pair of cells suggesting that most of the Cu, Pb, and Zn in the A-01 effluent was bound to the sediment quickly. Diffusive gradients in thin films (DGT) measurements of Cu and Zn in the sediments were much lower than bulk sediment concentrations. These results suggest that most of the Cu and Zn in the A-01 WTS sediments was not bioavailable, hence not toxic to aquatic organisms, as a likely consequence of adsorption to sediment particles and complexation with organic and inorganic substances.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Nitrate Controls on the Extent and Type of Metal Retention in Fine-Grained Sediments of a Simulated Aquifer

Aquifer groundwater quality is largely controlled by sediment composition and physical heterogeneity, which commonly sustain a unique redox gradient pattern. Attenuation of heavy metals within these heterogeneous aquifers is reliant on multiple factors, including redox conditions, and redox-active species that can further influence biogeochemical cycling. Here, we simulated an alluvial aquifer system using columns filled with natural coarse-grained sediments and two domains of fine-grained sediment lenses. Our goal was to examine heavy metal (Ni and Zn) attenuation within a complex aquifer network and further explore nitrate-rich groundwater conditions. The fine-grained sediment lenses sustained reducing conditions and served as a sink for Ni sequestration – in the form of Ni-silicates, Ni-organic matter, and a dominant Ni-sulfide phase. Further, the silicate clay and sulfide pools were also important retention mechanisms for Zn; however, Ni was associated more extensively with organic matter compared to Zn that formed layered double hydroxides. Nitrate-rich conditions promoted denitrification within the lenses that was coupled to the oxidation of Fe(II) and the concomitant precipitation of an Fe(III) phase with higher structural distortion. A decreased metal sulfide pool also resulted, where nitrate-rich conditions generated in an average 20% decrease in solid phase Ni, Zn, and Fe. Ultimately, nitrate plays a significant role in the aquifer’s biogeochemical cycling and capacity to retain heavy metals.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

A Prodrug Strategy to Conditionally Trap Therapeutic Payloads for Improved Tumor Retention

Altered extracellular proteolysis has been exploited to selectively activate therapeutics in diseases such as cancer; however, once activated, extracellular drugs can diffuse away, limiting efficacy. We address this challenge by coupling proteolytic activation with membrane tethering to retain drugs within diseased tissue. To accomplish this, we developed “restricted interaction peptides” (RIPs), a delivery platform that leverages elevated proteolytic activity to activate membrane-interacting peptides, localizing cargos near the site of proteolysis. We demonstrate that RIPs can deliver diverse therapeutic cargos, including cytotoxins and radioisotopes. As proof of concept, we engineered “FRIP,” a RIP designed for cleavage by fibroblast activation protein (FAP), an endoprotease upregulated in solid tumors and fibrosis. Efficient P4–P4’ substrate sequences were identified and incorporated into FRIPs. Cell-based studies showed that, upon activation, the peptide adhered to membranes rapidly internalized and successfully delivered therapeutic cargos. Consistent with this, FRIPs delivering MMAE inhibited proliferation in an FAP-dependent manner. Imaging studies confirmed tumor targeting with minimal uptake in normal tissues. Finally, FRIPs delivering MMAE or Cu-67 exhibited potent antitumor effects. These findings establish membrane tethering as a strategy to enhance drug retention.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2022

High Temperature Polymer Electrolyte Membrane Fuel Cells with High Phosphoric Acid Retention

Phosphoric acid loss poses immense hurdles for the durability of high-temperature polymer electrolyte membrane fuel cells (HT-PEMFCs). Here we report quaternary ammonium-biphosphate ion-pair HT-PEMFCs that do not lose phosphoric acids under normal and accelerated stress conditions. Additionally, our energetics study explains the acid loss behavior of the conventional phosphoric acid-polybenzimidazole (PA-PBI) system by two mechanisms. If PA loss occurs via acid evaporation, the acid loss is constant over time. On the other hand, when water activity in the PA-PBI system is high, exponential decay of PA loss occurs via the water replacement mechanism. Combined 31 P NMR and computational studies show that the proposed ion-pair system has six times higher interaction energy, which allows for containing all PAs in the membrane electrode assemblies under a broad range of operating conditions. In addition, polar interactions between the phosphonic acid ionomer and phosphoric acid explain acid retention in the electrodes of the ion-pair HT-PEMFCs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Nitrogen doping–enabled low-temperature capacitance retention in carbon materials

Reliable energy storage at subzero temperatures is crucial for polar and space applications. Nitrogen-doped multiscale porous carbon aerogels deliver 96% capacitance retention at −40 °C and 1.43 Wh L −1 energy density. In conclusion, enhanced nitrogen content and enlarged ion-accessible surface synergistically enable exceptional low-temperature supercapacitor performance.

Materials science↗
DOE OSTI2023

Wake up and retention in zinc magnesium oxide ferroelectric films

Zn 0.64 Mg 0.36 O (ZMO) is a newly discovered ferroelectric oxide with the wurtzite structure. Epitaxial Zn 0.64 Mg 0.36 O films from 0.036 to 0.5 μm in thickness are grown on Pt/sapphire with the crystallographic c-axis out of plane. At room temperature, the remanent polarization is ~80 μC/cm 2 and the coercive field is ~3 MV/cm. The coercive field is strongly temperature dependent up to 240 °C with a pseudo-activation energy of 23 ± 0.3 meV, suggesting that polarization reversal occurs through an extrinsic process such as domain wall motion. ZMO films can be woken up in 20 electric field cycles on driving near the coercive field; they wake up in a single loop at fields in excess of 4 MV/cm. A thermally activated fluid imprint process, with a pseudo-activation energy of 67 ± 8 meV, enlarges the coercive field by several hundred kV cm –1 after switching the polarization. Additionally, ZMO films exhibit excellent retention characteristics; no reduction in the polarization is observed up to 1000 h from room temperature to 200 °C bakes. Here, this current early generation of ZMO films can survive several thousand switching cycles before dielectric breakdown occurs.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Transformational Challenge Reactor Safety Design and Radionuclide Retention Strategy

An integrated safety design and radionuclide (RN) retention strategy is developed to support the Transformational Challenge Reactor (TCR) demonstration. This demonstration aims to showcase viability for rapid deployment of a novel reactor by leveraging the advances in materials, manufacturing, and computational sciences through a highly integrated and agile design and development approach. This strategy provides a logical description and understanding of how RNs are contained within the facility. Rather than discussing fission product barriers individually between separate design and safety basis reports, this paper provides a consistent description and narrative to better facilitate regulatory interactions and focus safety design efforts. The principal barriers credited include the various coating layers in the tristructural isotropic (TRISO) fuel particle, the silicon carbide (SiC) matrix hosting the particles within the fuel element, the helium pressure boundary, and the confinement system. The choice and assumed performance of the credited barriers are highly conservative, which is a direct reflection of the low hazard that the TCR demonstration presents and the need to simplify and focus the safety review process accordingly. However, the strategy and the associated framework are generalized and may be adopted and tailored to support other advanced reactor demonstration efforts.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2024

Nitrogen acquisition and retention pathways in sustainable perennial bioenergy grass cropping systems

Abstract Perennial tall grasses show promise as bioenergy crops due to high productivity and efficient nutrient use. Ongoing research on bioenergy grasses seeks to reduce their reliance on synthetic nitrogen (N) fertilizer, the manufacture of which relies on fossil fuel combustion. Excessive use of fertilizers also causes adverse environmental consequences and leads to the evolutionary loss of plant traits beneficial to sustainable N cycle. Notably, perennial tall grasses have exhibited the potential to maintain high biomass yield without the need for N fertilizer or causing soil N depletion. Perennial grasses can be adept at interacting with their microbial partners to facilitate N acquisition and retention via mechanisms such as biological N fixation and nitrification inhibition. These inherent N management traits should be preserved and optimized at the this early stage of bioenergy grass breeding programs. This review examines the impact of external N on bioenergy grass production and explores the potential of leveraging advantageous N‐cycling attributes of perennial tall grasses, laying groundwork for future management and research efforts. With minimized dependency on external N input, the cultivation of perennial energy grasses will pave the way toward more resilient agricultural systems and play a significant role in addressing key global energy and environmental challenges.

Agriculture↗