Search NASA⌕ Search

SEARCH · Search NASA

Results for “safe control”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Multi‐fidelity digital twin structural model for a sub‐scale downwind wind turbine rotor blade

Abstract This paper presents the development of a multi‐fidelity digital twin structural model (virtual model) of an as‐built wind turbine blade. The goal is to develop and demonstrate an approach to produce an accurate and detailed model of the as‐built blade for use in verifying the performance of the operating two‐bladed, downwind rotor. The digital twin model development methodology, presented herein, involves a novel calibration process to integrate a wide range of information including design specifications, manufacturing information, and structural testing data (modal and static) to produce a multi‐fidelity digital twin structural model: a detailed high‐fidelity model (i.e., 3D finite element analysis [FEA]) and consistent beam‐type models for aeroelastic simulation. A key element is that the multi‐fidelity structural digital twin method follows the rotor from the stages of design, to manufacturing, then to the ground testing and field operation. The result of this comprehensive approach is an accurate multi‐fidelity digital twin structural model for the geometric, structural, and structural dynamic properties of the as‐built blade within a 1% match in mass properties, 3.2% in blade frequencies, and 6% in deflection. The different stages of processing this information within the methodology are discussed. The rotor examined is the SUMR‐Demonstrator (SUMR‐D), which was installed on the Controls Advanced Research Testbed (CART‐2) wind turbine at the National Wind Technology Center. The digital twin model developed here was utilized to design controllers to safely operate SUMR‐D in field tests, which are providing additional data for further evaluation and development of the multi‐fidelity digital twin structural model.

Chetan, Mayank↗

Construction of MoS 2 /NiS 2 heterostructure with fast interfacial reaction kinetics for ultrafast sodium storage

Constructing heterostructure is a valid method to reinforcing sodium storage performance of transition metal chalcogenides materials. Herein, a simple, safe and controllable one step hydrothermal method is proposed to synthesize MoS 2 /NiS 2 heterostructure. Due to the difference in band gaps and work functions of MoS 2 and NiS 2 , the charges are redistributed at the MoS 2 /NiS 2 heterointerfaces, thereby accelerating the migration of electrons and Na + . The heterointerfaces provide extra active sites for storing Na + , thus increasing the sodium storage capacity of the heterostructure. Furthermore, the distinct redox potentials of NiS 2 and MoS 2 promote the structural stability of MoS 2 /NiS 2 heterostructure during the electrochemical reaction processes. Consequently, the obtained MoS 2 /NiS 2 heterostructure exhibits superior rate properties (339.4 mAh g –1 at 10 A g –1 ) and ultra-stable cycling stability (480.5 mAh g –1 after 350 cycles at 1 A g –1 ). Finally, this paper presents a valid strategy for creating heterostructure anodes with excellent sodium storage properties.

25 ENERGY STORAGE↗

Towards Analytic Solutions of Step-Wise Safe Switching for Known Affine-Linear Models

In the present work we establish conditions which guarantee safe transitions for the closed-loop system produced by the application of the Step-Wise Safe Switching control approach to an affine linear system when the nonlinear description of the plant is known. These conditions are based on the local Input to State Stability (ISS) properties of the nonlinear system around the plant's nominal operating points.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Final design of thermal diagnostic system in SPIDER ion source

The prototype radio frequency source of the ITER heating neutral beams will be first tested in SPIDER test facility to optimize H{sup −} production, cesium dynamics, and overall plasma characteristics. Several diagnostics will allow to fully characterise the beam in terms of uniformity and divergence and the source, besides supporting a safe and controlled operation. In particular, thermal measurements will be used for beam monitoring and system protection. SPIDER will be instrumented with mineral insulated cable thermocouples, both on the grids, on other components of the beam source, and on the rear side of the beam dump water cooled elements. This paper deals with the final design and the technical specification of the thermal sensor diagnostic for SPIDER. In particular the layout of the diagnostic, together with the sensors distribution in the different components, the cables routing and the conditioning and acquisition cubicles are described.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

A Barrier-Certificated Reinforcement Learning Approach for Enhancing Power System Transient Stability

Increasing integration of renewable resources brings more flexibility and poses new challenges to modern power systems, leading to highly nonlinear and complex dynamics. Here, this paper aims to provide a general solution framework to traditional control problems, such as frequency control and voltage control, which attempt to maintain the stability of either synchronous generators-governed or inverter-governed systems when subjected to a disturbance and simultaneously guarantee operational constraints, providing a complete complement to existing works on control design. Building on reinforcement learning (RL) and control barrier functions, the framework includes two subsystems, i.e., a model-free controller and a barrier-certification system, which discover RL-based control actions and sequentially filter them using a barrier certificate to satisfy operational constraints. Calculating a barrier function is generally challenging for a complex power system. This is addressed by representing the barrier function using neural networks (NNs) and data-based approaches. An adaptive method is introduced to certify the neural barrier function that perseveres barrier conditions, which is more compatible with online implementation. The proposed framework synthesizes a stabilizing controller that satisfies predefined safety regions. The effectiveness of the proposed framework is demonstrated via several comparative case studies.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Anthropometric accommodation in USAF cockpits

Over the past three years, a new set of methodologies has been developed to specify and evaluate anthropometric accommodation in USAF crewstation designs. These techniques are used to improve the ability of the pilot to reach controls, to safely escape the aircraft, to achieve adequate mobility and comfort, and to assure full access to the visual field both inside and outside the aircraft. This paper summarized commonly encountered aircraft accommodation problems, explains the failure of the traditional 'percentile man' design concept to resolve these difficulties, and suggests an alternative approach for improving cockpit design to better accommodate today's more heterogeneous flying population.

Zehner, Gregory F.↗

Development and Evaluation of Fault-Tolerant Flight Control Systems

The research is concerned with developing a new approach to enhancing fault tolerance of flight control systems. The original motivation for fault-tolerant control comes from the need for safe operation of control elements (e.g. actuators) in the event of hardware failures in high reliability systems. One such example is modem space vehicle subjected to actuator/sensor impairments. A major task in flight control is to revise the control policy to balance impairment detectability and to achieve sufficient robustness. This involves careful selection of types and parameters of the controllers and the impairment detecting filters used. It also involves a decision, upon the identification of some failures, on whether and how a control reconfiguration should take place in order to maintain a certain system performance level. In this project new flight dynamic model under uncertain flight conditions is considered, in which the effects of both ramp and jump faults are reflected. Stabilization algorithms based on neural network and adaptive method are derived. The control algorithms are shown to be effective in dealing with uncertain dynamics due to external disturbances and unpredictable faults. The overall strategy is easy to set up and the computation involved is much less as compared with other strategies. Computer simulation software is developed. A serious of simulation studies have been conducted with varying flight conditions.

Song, Yong D.↗

Operational Experience with Autonomous Star Trackers on ESA Interplanetary Spacecraft

Mars Express (MEX), Rosetta and Venus Express (VEX) are ESA interplanetary spacecrafts (S/C) launched in June 2003, March 2004 and November 2005, respectively. Mars Express was injected into Mars orbit end of 2003 with routine operations starting in spring 2004. Rosetta is since launch on its way to rendezvous comet Churyumov-Gerasimenko in 2014. It has completed several test and commissioning activities and is performing several planetary swingbys (Earth in spring 2005, Mars in spring 2007, Earth in autumn 2007 and again two years later). Venus Express has also started routine operations since the completion of the Venus orbit insertion maneuver sequence beginning of May 2006. All three S/C are three axes stabilized with a similar attitude and orbit control system (AOCS). The attitude is estimated on board using star and rate sensors and controlled using four reaction wheels. A bipropellant reaction control system with 10N thrusters serves for wheel off loadings and attitude control in safe mode. Mars Express and Venus Express have an additional 400N engine for the planetary orbit insertion. Nominal Earth communication is accomplished through a high gain antenna. All three S/C are equipped with a redundant set of autonomous star trackers (STR) which are based on almost the same hardware. The STR software is especially adapted for the respective mission. This paper addresses several topics related to the experience gained with the STR operations on board the three S/C so far.

Lauer, Mathias↗

International Space Station (ISS) Plasma Contactor Unit (PCU) Utilization Plan Assessment Update

The International Space Station (ISS) vehicle undergoes spacecraft charging as it interacts with Earth's ionosphere and magnetic field. The interaction can result in a large potential difference developing between the ISS metal chassis and the local ionosphere plasma environment. If an astronaut conducting extravehicular activities (EVA) is exposed to the potential difference, then a possible electrical shock hazard arises. The control of this hazard was addressed by a number of documents within the ISS Program (ISSP) including Catastrophic Safety Hazard for Astronauts on EVA (ISS-EVA-312-4A_revE). The safety hazard identified the risk for an astronaut to experience an electrical shock in the event an arc was generated on an extravehicular mobility unit (EMU) surface. A catastrophic safety hazard, by the ISS requirements, necessitates mitigation by a two-fault tolerant system of hazard controls. Traditionally, the plasma contactor units (PCUs) on the ISS have been used to limit the charging and serve as a "ground strap" between the ISS structure and the surrounding ionospheric plasma. In 2009, a previous NASA Engineering and Safety Center (NESC) team evaluated the PCU utilization plan (NESC Request #07-054-E) with the objective to assess whether leaving PCUs off during non-EVA time periods presented risk to the ISS through assembly completion. For this study, in situ measurements of ISS charging, covering the installation of three of the four photovoltaic arrays, and laboratory testing results provided key data to underpin the assessment. The conclusion stated, "there appears to be no significant risk of damage to critical equipment nor excessive ISS thermal coating damage as a result of eliminating PCU operations during non- EVA times." In 2013, the ISSP was presented with recommendations from Boeing Space Environments for the "Conditional" Marginalization of Plasma Hazard. These recommendations include a plan that would keep the PCUs off during EVAs when the space environment forecast input to the ISS charging model indicates floating potentials (FP) within specified limits. These recommendations were based on the persistence of conditions in the space environment due to the current low solar cycle and belief in the accuracy and completeness of the ISS charging model. Subsequently, a Noncompliance Report (NCR), ISS-NCR-232G, Lack of Two-fault Tolerance to EVA Crew Shock in the Low Earth Orbit Plasma Environment, was signed in September 2013 specifying new guidelines for the use of shock hazard controls based on a forecast of the space environment from ISS plasma measurements taken prior to the EVA [ISS-EVA-312-AC, 2012]. This NESC assessment re-evaluates EVA charging hazards through a process that is based on over 14 years of ISS operations, charging measurements, laboratory tests, EMU studies and modifications, and safety reports. The assessment seeks an objective review of the plasma charging hazards associated with EVA operations to determine if any of the present hazard controls can safely change the PCU utilization plan to allow more flexibility in ISS operations during EVA preparation and execution.

Hernandez-Pellerano, Amri↗

Immersive Technologies for Human-in-the-Loop Lunar Surface Simulations

NASA, the National Aeronautics and Space Administration, continually seeks innovative solutions to enhance its operations, particularly in the realms of testing, evaluation, and training for future missions. Immersive technologies, such as virtual, augmented, and mixed reality have proven to be powerful tools for realistic, interactive, and engaging environments. This paper explores how the Simulation and Graphics Branch at NASA’s Johnson Space Center (JSC) leverages immersive technology, modern commercial rendering engines, and physics-based systems simulations to develop human-in-the-loop systems for humanity’s return to the Moon through the Artemis program. When NASA returns to the Moon, astronauts will travel to the Moon’s South Pole where lighting conditions will cause a more complex operational environment. Human-in-the-loop testing plays a crucial role in NASA's mission planning, spacecraft and space systems development, and evaluation of operational scenarios. The development of immersive environments such as a lunar rover mockup at a video wall enables engineers and astronauts to simulate and experience mission scenarios, integrated spacecraft systems, and operational procedures in a relevant environment before deployment. By integrating realistic virtual environments, immersive technology allows for the visualization and interaction with virtual spacecraft models, mission landscapes, and complex operational tasks. This approach helps identify potential design flaws, operational challenges, and safety considerations. It also provides valuable insights for risk reduction and helps improve mission efficiency and effectiveness. With advanced motion tracking systems and custom virtual environments data can be gathered and evaluated to help NASA refine training protocols, develop specialized training procedures and optimize human-robotic interactions for future space missions. Furthermore, immersive technology offers opportunities for future training initiatives at NASA. The Virtual Reality Laboratory at JSC has pioneered training with Virtual Reality (VR) since the Hubble Space Telescope repair missions in the early 1990’s. Extended Reality (XR) simulations enable astronauts to rehearse complex spacewalks, spacecraft maneuvers, and extravehicular activities in a safe and controlled environment. By replicating the physical and cognitive challenges of space missions, immersive training experiences enhance astronauts' situational awareness, decision-making abilities, and adaptability to unexpected scenarios. Additionally, immersive technology facilitates collaborative training, allowing geographically dispersed crew and mission control personnel to engage in synchronized simulations, fostering teamwork and effective communication. The adoption of immersive technology in NASA's testing, evaluation, and future training programs has yielded significant benefits. By incorporating human-in-the-loop testing for studies involving Extra Vehicular Activities (EVA), surface mobility and landing systems, NASA can identify and mitigate risks, optimize operational procedures, and enhance mission success. Ultimately, immersive training experiences can empower astronauts to better navigate the complexities of space missions, ensuring their safety, productivity, and success in the dynamic and challenging environments they will experience at the Lunar South Pole.

Simulation Modeling Virtual Reality Immersive Tech↗

Immersive Technologies for Human-in-the-Loop Lunar Surface Simulations

NASA, the National Aeronautics and Space Administration, continually seeks innovative solutions to enhance its operations, particularly in the realms of testing, evaluation, and training for future missions. Immersive technologies, such as virtual, augmented, and mixed reality have proven to be powerful tools for immersing users in realistic, interactive, and engaging environments. This paper explores how the Simulation and Graphics Branch at NASA’s Johnson Space Center (JSC) leverages immersive technology, modern commercial rendering engines, and physics-based systems simulations to develop human-in-the-loop systems for humanity’s return to the Moon through the Artemis program. When NASA returns to the Moon, astronauts will travel to the Moon’s South Pole where lighting conditions will cause a more complex operational environment. Human-in-the-loop simulations play a crucial role in NASA’s mission planning, spacecraft and space systems development, and evaluation of operational scenarios. The development of immersive environments such as a lunar rover mockup at a video wall enables engineers and astronauts to simulate and experience mission scenarios, integrated spacecraft systems, and operational procedures in a relevant environment before deployment. By integrating realistic virtual environments, immersive technology allows for the visualization and interaction with virtual spacecraft models, mission landscapes, and complex operational tasks. This approach helps identify potential design flaws, operational challenges, and safety considerations. It also provides valuable insights for risk reduction and helps improve mission efficiency and effectiveness. With advanced motion tracking systems and custom virtual environments, data can be gathered and evaluated to help NASA refine training protocols, develop specialized training procedures, and optimize human-robotic interactions for future space missions. Furthermore, immersive technology offers opportunities for future training initiatives at NASA. The Virtual Reality Laboratory at JSC has pioneered training with Virtual Reality (VR) since the Hubble Space Telescope repair missions in the early 1990’s. Extended Reality (XR) simulations enable astronauts to rehearse complex spacewalks, spacecraft maneuvers, and extravehicular activities in a safe and controlled environment. By replicating the physical and cognitive challenges of space missions, immersive training experiences enhance astronauts’ situational awareness, decision-making abilities, and adaptability to unexpected scenarios. Additionally, immersive technology facilitates collaborative training, allowing geographically dispersed crew and mission control personnel to engage in synchronized simulations, fostering teamwork and effective communication. The adoption of immersive technology in NASA’s testing, evaluation, and future training programs has yielded significant benefits. By incorporating human-in-the-loop simulations for studies involving Extra Vehicular Activities (EVA), surface mobility and landing systems, NASA can identify and mitigate risks, optimize operational procedures, and enhance mission success. Ultimately, immersive simulation experiences can empower astronauts to better navigate the complexities of space missions, ensuring their safety, productivity, and success in the dynamic and challenging environments they will experience at the Lunar South Pole.

HITL↗

Hollow electron-lens assisted collimation and plans for the LHC

The hollow electron lens (e-lens) is a very powerful and advanced tool for active control of diffusion speed of halo particles in hadron colliders. Thus, it can be used for a controlled depletion of beam tails and enhanced beam halo collimation. This is of particular interest in view of the upgrade of the Large Hadron Collider (LHC) at CERN, in the framework of the High-Luminosity LHC project (HL-LHC). The estimated stored energy in the tails of the HL-LHC beams is about 30 MJ, posing serious constraints on its control and safe disposal. In particular, orbit jitter can cause significant loss spikes on primary collimators, which can lead to accidental beam bump and magnet quench. Successful tests of e-lens assisted collimation have been carried out at the Tevatron collider at Fermilab and a review of the main outcomes is shown. Preliminary results of recent experiments performed at the Relativistic Heavy Ion Collider (RHIC) at Brookhaven, put in place to explore different operational scenarios studies for the HL-LHC, are also discussed. Status and plans for the deployment of hollow electron lenses at the HL-LHC are presented.

43 PARTICLE ACCELERATORS↗

SU-F-T-505: A Novel Approach for Sparing Critical Organs at Risk for Cancer Patients Undergoing Radiation Oncology Treatments

Purpose: A major goal of an effective radiation treatment plan is to deliver the maximum dose to the tumor while minimizing radiation exposure to the surrounding normal structures. For example, due to the radiation exposure to neighboring critical structures during prostate cancer treatment, a significant increase in cancer risk was observed for the bladder (77%) and the rectum (105%) over the following decade. Consequently, an effective treatment plan necessitates limiting the exposure to such organs which can best be achieved by physically displacing the organ at-risk. The goal of this study is to present a prototype for an organ re-positioner device designed and fabricated to physically move the rectum away from the path of radiation beam during external beam and brachytherapy treatments. This device affords patient comfort and provides a fully controlled motion to safely relocate the rectum during treatment. Methods: The NiTi shape memory alloy was designed and optimized for manufacturing a rectal re-positioner device through cooling and heating the core alloy for its shaping. This has been achieved through a prototyped custom designed electronic circuit in order to induce the reversible austenitic transformation and was tested rigorously to ensure the integrity of the actuated motion in displacement of the target anatomy. Results: The desirable NiTi shape-setting was configured for easy insertion and based on anatomical constraint. When the final prototype was evaluated, accuracy and precision of the maximum displacement and temperature changes revealed that the device could safely be used within the target anatomy. Conclusion: The organ re-positioner device is a promising tool that can be implemented in clinical setting. It provides a controlled and safe displacement of the delicate organ(s) at risk. The location of the organ being treated could also be identified using conventional onboard imaging devices or MV imaging available on-board most modern clinical accelerators.

60 APPLIED LIFE SCIENCES↗

A fail safe laser activated switch used as an emergency control link at the Langley Vortex Research Facility

A fail safe light activated switch was used as an emergency control link at the Langley Vortex Research Facility. In this facility aircraft models were towed through a still air test chamber by a gasoline powered vehicle which was launched from one end of a 427-meter track and attained velocities to 31 m/sec in the test chamber. A 5 mW HeNe laser with a mechanical copper provided a connecting link with the moving tow vehicle on which a silicon photodiode receiver with a specially designed amplifier provided a fail safe switching action. This system provided an emergency means of stopping the vehicle by turning off the laser to interrupt the power to the vehicle ignition and brake release systems.

Kassel, P. C., Jr.↗