Search NASA⌕ Search

SEARCH · Search NASA

Results for “science data analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Search for Dark Matter with the LZ Experiment

Overwhelming evidence from astrophysical observations indicates that only 20% of the matter in the universe consists of ordinary matter, while the remaining 80% is made of some form of matter called "dark matter''. Although these indirect astrophysical observations convince us that dark matter exists, dark matter has not yet been directly observed. The standard model of particle physics, which has been very successful in explaining the properties of ordinary matter, can neither explain dark matter's presence nor its properties. The discovery and identification of dark matter would have a profound impact on cosmology, astronomy, and particle physics. A leading dark matter candidate consistent with all astrophysical data is a weakly interacting massive particle (WIMP). WIMPs could be detected through their interactions with atomic nuclei in specially designed detectors. Since the collision rates are expected to be very small (a few collisions per year for a 1-ton detector), large detectors with low backgrounds and excellent detection capability for rare collisions are needed to gain knowledge of the nature of dark matter. With dark matter experiments such as the LZ experiment, we are in a position to detect and study this dark matter through sensitive terrestrial direct detection experiments. If no discovery is made with LZ, it will be very difficult to reconcile the sensitivity limit of this experiment with most conventional WIMP scenarios, and alternate paradigms will have to be strongly considered for dark matter. The main focus of the U-M dark matter group over the past two years was on design validation and fabrication for the LZ project, followed by commissioning and operation of the LZ dark matter experiment, and the analysis of the science data during the following funding cycle. The U-M dark matter group had identified two key areas to contribute to the LZ project: the design and fabrication of a radon removal element for the xenon circulation system, and the execution and coordination of prototyping and design validation performed by the small xenon chamber group.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Model-driven multi-omic data analysis elucidates metabolic immunomodulators of macrophage activation

Macrophages are central players in the immune response, manifesting divergent phenotypes to control inflammation and innate immunity through the release of cytokines and other regulatory factor-dependent signaling pathways. In recent years, the focus on metabolism has been reemphasized as critical signaling and regulatory pathways of human pathophysiology, ranging from cancer to aging, often converge on metabolic responses. Here, we used genome-scale modeling and multi-omics (transcriptomics, proteomics, and metabolomics) analysis to assess metabolic features critical for macrophage functions. We constructed a genome-scale metabolic network for the RAW 264.7 cell line to determine metabolic modulators of macrophage activation. Metabolites well-known to be associated with immunoactivation (e.g., glucose and arginine) and immunosuppression (e.g., tryptophan and vitamin D3) were amongst the most critical effectors. Intracellular metabolic mechanisms linked to critical suppressive effectors were then assessed, identifying a suppressive role for de novo nucleotide synthesis. Finally, the underlying metabolic mechanisms of macrophage activation are identified by analyzing multi-omic data obtained from LPS-stimulated RAW cells in the context of our flux-based predictions. Our study demonstrates metabolism's role in regulating activation may be greater than previously anticipated and elucidates underlying metabolic connections between activation and metabolic effectors.

59 BASIC BIOLOGICAL SCIENCES↗

Randomized Projection for Rank-Revealing Matrix Factorizations and Low-Rank Approximations

Rank-revealing matrix decompositions provide an essential tool in spectral analysis of matrices, including the Singular Value Decomposition (SVD) and related low-rank approximation techniques. QR with Column Pivoting (QRCP) is usually suitable for these purposes, but it can be much slower than the unpivoted QR algorithm. For large matrices, the difference in performance is due to increased communication between the processor and slow memory, which QRCP needs in order to choose pivots during decomposition. Our main algorithm, Randomized QR with Column Pivoting (RQRCP), uses randomized projection to make pivot decisions from a much smaller sample matrix, which we can construct to reside in a faster level of memory than the original matrix. This technique may be understood as trading vastly reduced communication for a controlled increase in uncertainty during the decision process. Furthermore, for rank-revealing purposes, the selection mechanism in RQRCP produces results that are the same quality as the standard algorithm, but with performance near that of unpivoted QR (often an order of magnitude faster for large matrices). Additionally, we also propose two formulas that facilitate further performance improvements. The first efficiently updates sample matrices to avoid computing new randomized projections. The second avoids large trailing updates during the decomposition in truncated low-rank approximations. Our truncated version of RQRCP also provides a key initial step in our truncated SVD approximation, TUXV. These advances open up a new performance domain for large matrix factorizations that will support efficient problem-solving techniques for challenging applications in science, engineering, and data analysis.

97 MATHEMATICS AND COMPUTING↗

Multivariate statistical analysis of atom probe tomography data

The application of spectrum imaging multivariate statistical analysis methods, specifically principal component analysis (PCA), to atom probe tomography (APT) data has been investigated. The mathematical method of analysis is described and the results for two example datasets are analyzed and presented. The first dataset is from the analysis of a PM 2000 Fe-Cr-Al-Ti steel containing two different ultrafine precipitate populations. PCA properly describes the matrix and precipitate phases in a simple and intuitive manner. A second APT example is from the analysis of an irradiated reactor pressure vessel steel. Fine, nm-scale Cu-enriched precipitates having a core-shell structure were identified and qualitatively described by PCA. Advantages, disadvantages, and future prospects for implementing these data analysis methodologies for APT datasets, particularly with regard to quantitative analysis, are also discussed.

36 MATERIALS SCIENCE↗

Next-Generation Search for Solar Axion Dark Matter with the International Axion Observatory

The International Axion Observatory (IAXO) was first proposed in 2011[1]-[5]. With this proposal our LDRD team, founding member of IAXO has been able to play a leading role in the IAXO experiment. We have participated in technical, scientific and organizational IAXO meetings to shape the future of the experiment. We accomplished the layout of the first-ever full-revolution telescope for solar axion searches[6]-[10] and expanded the science reach of IAXO from standard axion searches to new and potentially more exotic opportunities, such as other dark matter candidates, hidden sector particles or dark energy searches [11]-[20]. We also fulfilled the analysis of axion science data previously collected with the LLNL IAXO pathfinder x-ray telescope (XRT) [21] at the European Organization for Nuclear Research particle physics (CERN) located near Geneva, Switzerland, by means of the CERN Axion Solar Experiment (CAST). Moreover, LDRD PI Dr. Julia K. Vogel has officially been elected as Deputy Spokesperson of IAXO.

79 ASTRONOMY AND ASTROPHYSICS↗

Unraveling the Threads of Environmental Justice in Critical Mineral Extraction: A Framework for Regionalized Life Cycle Data

As we transition to a more sustainable energy system, the extraction and processing of critical minerals becomes increasingly important. However, these industries often raise concerns about environmental and social impacts, particularly in disadvantaged communities. To address these concerns, our research focuses on regionalizing environmental life cycle data to connect it with communities affected by mineral extraction. A framework was developed for collecting life cycle background data that supports the Justice40 Toolset, a market-based approach to evaluating net benefits and costs of critical mineral material recovery pathways. A goal was to alleviate public skepticism around mineral extraction processes, including secondary and unconventional feedstocks, by highlighting both environmental and social impacts. To achieve this, computational analysis and geospatial data science techniques were employed, such as within-scale and across-scale methods and proxy dataset usage. By doing so, we were able to develop a framework for identifying and disaggregating data down to regions small enough to support Justice40 goals. Our approach not only provides valuable tools fo insight into the environmental implications of mineral extraction but also helps policymakers evaluate the social impacts on local communities. This research contributes to a more just and equitable transition to a sustainable energy system, ensuring that marginalized voices are heard in decision-making process.

Davis, Tyler [NETL Site Support Contractor, Nation↗

Data Crosscutting Requirements Review

In April 2013, a diverse group of researchers from the U.S. Department of Energy (DOE) scientific community assembled to assess data requirements associated with DOE-sponsored scientific facilities and large-scale experiments. Participants in the review included facilities staff, program managers, and scientific experts from the offices of Basic Energy Sciences, Biological and Environmental Research, High Energy Physics, and Advanced Scientific Computing Research. As part of the meeting, review participants discussed key issues associated with three distinct aspects of the data challenge: 1) processing, 2) management, and 3) analysis. These discussions identified commonalities and differences among the needs of varied scientific communities. They also helped to articulate gaps between current approaches and future needs, as well as the research advances that will be required to close these gaps. Moreover, the review provided a rare opportunity for experts from across the Office of Science to learn about their collective expertise, challenges, and opportunities. The "Data Crosscutting Requirements Review" generated specific findings and recommendations for addressing large-scale data crosscutting requirements.

ASCR↗

Next generation sequencing (NGS) technologies and applications [Slides]

NGS technology overview: (1) NGS library preparation - Nucleic acids extraction, Sample quality control, RNA conversion to cDNA, Addition of sequencing adapters, Quality control of library; (2) Sequencing - Clonal amplification of library fragments, (except PacBio), Sequencing by synthesis, Data output (reads and quality); and (3) Data analysis - Read mapping, Genome assembly, Gene expression, Operon structure, sRNA discovery, and Epigenetic analyses.

59 BASIC BIOLOGICAL SCIENCES↗

Towards an Open (Data) Science Analytics-Hub for Reproducible Multi-Model Climate Analysis at Scale

Open Science is key to future scientific research and promotes a deep transformation in the whole scientific research process encouraging the adoption of transparent and collaborative scientific approaches aimed at knowledge sharing. Open Science is increasingly gaining attention in the current and future research agenda worldwide. To effectively address Open Science goals, besides Open Access to results and data, it is also paramount to provide tools or environments to support the whole research process, in particular the design, execution and sharing of transparent and reproducible experiments, including data provenance (or lineage) tracking. This work introduces the Climate Analytics-Hub, a new component on top of the Earth System Grid Federation (ESGF), which joins big data approaches and parallel computing paradigms to provide an Open Science environment for reproducible multi-model climate change data analytics experiments at scale. An operational implementation has been set up at the SuperComputing Centre of the Euro- Mediterranean Center on Climate Change, with the main goal of becoming a reference Open Science hub in the climate community regarding the multi-model analysis based on the Coupled Model Intercomparison Project (CMIP).

analytics-hub↗

Transportation Technology Program: Annual Report, Fiscal Year 2008

The Transportation Technology Program at Oak Ridge National Laboratory (ORNL) supports the mission of the Vehicle Technologies Program (VTP) within the U.S. Department of Energy (DOE) Office of Energy Efficiency and Renewable Energy (EERE). The VTP mission is “to develop more energy-efficient and environmentally friendly highway transportation technologies (for both cars and trucks) that will meet or exceed drivers’ performance expectations and environmental requirements and that will enable America to use significantly less petroleum and reduce greenhouse gas (GHG) emissions.” The VTP mission supports national goals relating to energy security and GHG reductions. Table 1 illustrates the flowdown of national goals to VTP performance measures. ORNL provides VTP with expertise supporting each of the program’s performance measures. ORNL performs research and development (R&D) and provides technical support in the areas of combustion, fuel utilization, systems analysis, materials science and technology, electrical engineering, data collection and analysis, and economic analysis of technology and policy options. ORNL’s FY 2008 R&D supporting the VTP performance goals is described in more detail beginning on page 7.

33 ADVANCED PROPULSION SYSTEMS↗

Design of experiments and data analysis challenges in calibration for forensics applications

Forensic science aims to infer characteristics of source terms using measured observables. Our focus is on statistical design of experiments and data analysis challenges arising in nuclear forensics. More specifically, we focus on inferring aspects of experimental conditions (of a process to produce product Pu oxide powder), such as temperature, nitric acid concentration, and Pu concentration, using measured features of the product Pu oxide powder. The measured features, Y, include trace chemical concentrations and particle morphology such as particle size and shape of the produced Pu oxide power particles. Making inferences about the nature of inputs X that were used to create nuclear materials having particular characteristics, Y, is an inverse problem. Therefore, statistical analysis can be used to identify the best set (or sets) of Xs for a new set of observed responses Y. One can fit a model (or models) such as Υ = f(Χ) + error , for each of the responses, based on a calibration experiment and then “invert” to solve for the best set of Xs for a new set of Ys. This perspectives paper uses archived experimental data to consider aspects of data collection and experiment design for the calibration data to maximize the quality of the predicted Ys in the forward models; that is, we assume that well-estimated forward models are effective in the inverse problem. In addition, we consider how to identify a best solution for the inferred X, and evaluate the quality of the result and its robustness to a variety of initial assumptions, and different correlation structures between the responses. In addition, we also briefly review recent advances in metrology issues related to characterizing particle morphology measurements used in the response vector, Y.

36 MATERIALS SCIENCE↗

The ASDC Multi Mission Interactive Archive: on line analysis of the Swift/XRT data

We present the Swift/XRT Interactive Archive and the On-line Analysis tool developed at the ASI Science Data Center (ASDC) as part of the Multi Mission Interactive Archive. The On-line Analysis enables to run the Swift/XRT software task ''xrtpipeline'' on any desired XRT observation present in the Swift data archive maintained at ASDC, directly on the web. On-line imaging (with XIMAGE), spectral (with XSPEC) and timing data analysis (with LCURVE) can be performed. At the same time, spectra, light curves, effective area, exposure map and response matrix are promptly available for download to the user for any off-line analysis.

79 ASTRONOMY AND ASTROPHYSICS↗

The Influence of Visual Provenance Representations on Strategies in a Collaborative Hand-off Data Analysis Scenario

Conducting data analysis tasks rarely occur in isolation. Especially in intelligence analysis scenarios where different experts contribute knowledge to a shared understanding, members must communicate how insights develop to establish common ground among collaborators. The use of provenance to communicate analytic sensemaking carries promise by describing the interactions and summarizing the steps taken to reach insights. Yet, no universal guidelines exist for communicating provenance in different settings. Our work here focuses on the presentation of provenance information and the resulting conclusions reached and strategies used by new analysts. In an open-ended, 30-minute, textual exploration scenario, we qualitatively compare how adding different types of provenance information (specifically data coverage and interaction history) affects analysts' confidence in conclusions developed, propensity to repeat work, filtering of data, identification of relevant information, and typical investigation strategies. We see that data coverage (i.e., what was interacted with) provides provenance information without limiting individual investigation freedom. On the other hand, while interaction history (i.e., when something was interacted with) does not significantly encourage more mimicry, it does take more time to comfortably understand, as represented by less confident conclusions and less relevant information-gathering behaviors. In conclusion, our results contribute empirical data towards understanding how provenance summarizations can influence analysis behaviors.

97 MATHEMATICS AND COMPUTING↗

Characterization of Strategies for Obtaining Confident Identifications in Bottom-Up Proteomics Measurements Using Hybrid FTMS instruments

Hybrid FTMS instruments, such as the LTQ-FTTM and LTQ-OrbitrapTM, are capable of generating fast duty cycle linear ion trap MS/MS data along with high resolution information without compromising the overall throughput of measurements. Combined with online LC separations, these instruments represent powerful and flexible tools for proteomics research. In the present work, we explore strategies for high throughput, high coverage proteomics measurements using hybrid FTMS instruments. Our accurate mass and time tag (AMT tag) strategy enables identification of thousands of peptides in a single LC-FTMS analysis by comparing accurate molecular mass and LC elution time information from the analysis to a reference database. An alternative strategy considered here employs linear ion trap (low resolution) MS/MS identifications generated by an appropriate search engine, such as SEQUEST; the high resolution precursor ion spectra were used to refine the MS/MS identifications, an approach termed Accurate Precursor Mass Filter (APMF). The APMF results can be additionally filtered using the LC elution time information from the AMT tag database, which constitutes a Precursor Mass and Time Filter (PMTF), the third approach implemented in this study. Both the APMF and the PMTF approaches are evaluated for coverage and confidence of peptide identifications and contrasted with the current AMT tag strategy. Two separate methodologies were used to reliably quantify identification confidence: a commonly used decoy database method and an alternative method based on the mass accuracy histogram. The two methodologies produced consistent results, confirming the validity of the identification confidence evaluations. Comparison of the three approaches has shown that the AMT tag data analysis approach may be preferential for studies giving a priority to the highest achievable coverage. The APMF approach by itself does not require AMT tag database and provides a moderate coverage combined with acceptable confidence values of ~99%.The PMTF approach yielded a significantly better peptide identification confidence, >99.9%, that essentially excluded any false peptide identifications. The results suggest that even with a perfect peptide ID (0% FDR in the peptide MS/MS database), the peak matching FDR is a function of the database size, so smaller high confidence databases are the goal. Thus a combined strategy can implement multi-pass APMF approach to generate high confidence AMT tag databases, which can be then validated using PMTF approach; the compact high quality databases will be used for subsequent high-throughput, high coverage AMT tag studies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

SAXS Analysis of Embedded Pt Nanocrystals Irradiated with Swift Heavy Ions

Elongated Pt nanocrystals (NCs) formed in SiO{sub 2} by ion implantation, thermal annealing and swift heavy ion irradiation were analyzed by small-angle X-ray scattering (SAXS) and transmission electron microscopy (TEM) measurements. Transmission SAXS measurements were performed in samples aligned at different angles relative to the photon beam resulting in non-isotropic scattering and thus enabling the three dimensional analysis of the NCs. Selected angular sectors of the detector were integrated and analyzed separately, leading to the individual evaluation of both the major and minor dimensions of the rod-shaped NCs. This method enables the use of well established spherical models for the SAXS data analysis and yielded excellent agreement with TEM results.

36 MATERIALS SCIENCE↗

Validation of two ribosomal RNA removal methods for microbial metatranscriptomics

The predominance of rRNAs in the transcriptome is a major technical challenge in sequence-based analysis of cDNAs from microbial isolates and communities. Several approaches have been applied to deplete rRNAs from (meta)transcriptomes, but no systematic investigation of potential biases introduced by any of these approaches has been reported. Here we validated the effectiveness and fidelity of the two most commonly used approaches, subtractive hybridization and exonuclease digestion, as well as combinations of these treatments, on two synthetic five-microorganism metatranscriptomes using massively parallel sequencing. We found that the effectiveness of rRNA removal was a function of community composition and RNA integrity for these treatments. Subtractive hybridization alone introduced the least bias in relative transcript abundance, whereas exonuclease and in particular combined treatments greatly compromised mRNA abundance fidelity. Illumina sequencing itself also can compromise quantitative data analysis by introducing a G+C bias between runs.

59 BASIC BIOLOGICAL SCIENCES↗

Reinforced double-threaded slide-ring networks for accelerated hydrogel discovery and 3D printing

Traditionally, slide-ring gels are stretchable but soft as a result of an elasticity-stretchability trade-off. Herein, we introduce a new approach to breaking this trade-off and creating reinforced slide-ring networks with mobile crosslinkers. Our approach involves the construction of a polyethylene glycol double-threaded γ-cyclodextrin-based pro-slide-ring crosslinker that serves as a modular component for 3D printing and copolymerization. The resulting crystalline-domain-reinforced slide-ring hydrogels, or CrysDoS-gels, exhibit both high elasticity and high stretchability. The modular synthesis allows for high-throughput synthesis of CrysDoS-gels, generating a large amount of data for structure-property analysis. Here, by employing data science techniques, such as machine learning and linear regression, not only were we able to identify which chemical components influence the mechanical properties of CrysDoS-gels, but this analysis also aided in the discovery of better-performing CrysDoS-gels. Finally, we demonstrate the potential application of the newly discovered CrysDoS-gels as sensing devices by 3D printing them as stress sensors with high sensitivity and a broad detection range.

3D-printing↗